Fedora Networking :: Connecting Home Network To Work Network
Sep 20, 2010
Currently my office use a Cisco Firewall which will only allow the ANYCONNECT utility to do the vpn connection. I found a Linux utility (OpenConnect) which will do the same thing, but allow me more flexibility with my networking needs.What I ultimately would like to have is to have a switch that I can connect any network device into it and be connected to the office. IE (my IP Work Phone and Computer) Currently I have is a computer with fedora 13 and two network cards eth0 (home network - connected to a router) and eth1 which I would like to connect a switch to. OpenConnect communicates fine and I can see the work network from the Fedora machine. It creates a vpn0 tun/tap device and I don't know how to pass communication to/from the eth1 device.
Do I try to iptables the ports for the phone and services I need on the computer? Or do I build bridge; and If I do what am I bridging. I have tried making a bridge from eth1 to vpn0 which reply's with unsupported device or something like that.Unfortunately my network skills are bit limited and my office says "it can't be done". Their solution is for me to buy a ASA5505 (or something device) and have a static IP. I would have to make it work as my router and even then it will only DHCP 10 ip addresses; which will cause a shortage of IP addresses in the house.
I'm new to Fedora and have a problem with the network manager. Everytime I start Fedora, it does not automatically connect to the default WIFI Browsed Google and just found [URL]..
I have a beefy Win Box desktop that i'm using as a media server and i have a home network setup already using windows xp. I had everything running fine and the PC connects flawlessly to my Bravia TV and both my ps3's so i know the network and sharing settings are setup just fine. Anyways i got tired of all the Windows 7 BS and decided i would once again use Ubuntu on my Toshiba netbook. So the question is how in the heck do i get my Ubuntu netbook to connect to the Desktop? I've tried browsing the fourms but either i'm missing something of just a little slow. What "extensions" would i need to get and how would i go about implementing it from there?
I just installed Ubuntu 9.10 and its great. However when I connect to the internet at home it shows that the connection has been established but I still cant connect to the internet. My flatmates are all able to connect. However, I am able to connect from work both wirelessly and through an ethernet cable.
my wireless home network is not recognized by my network card (RealTek RTL8190 mini PCI). The post was as follows: "I am using a new computer with Windows 7 , Athlon quad core 2.60 64 bit, 8GB RAM. Internet conection works fine with ethernet but ubuntu does not see my wireless network. card (RealTek RTL 8190 ID: 10ec:8190). Have searched this forum but unable to come up with a fix. I was looking for windows XP drivers to use Ndiswrapper but could not find a list of .inf files. My network is OK and works perfectly in windows and with my 2 laptops. Can anyone point me in the right direction? Additional info: install was done within Windows using WUBI to a separate partition on my HDD. I am new to this and thouroughly confused as to the procedure for installing the drivers if they are in fact available."
I am very frustrated in that I would like to use Ubuntu 10.04 but it is useless without internet connectability. I am new to linux and do not understand where to get the appropriate drivers or how to install them. I wish someone would answer this post and either give me a clue what to do or just say "give up" and uninstall ubunutu.
I am running fedora 14 and have tried to setup VPN access to work. I used the simple networking GUI program. Another engineer at work uses ubuntu and that is how he accesses the VPN. I think that I did everything right but get this generic 'VPN connection failed' message. I am trying to connect to a monowall firewall and have the IP address. Yes, I have an account but am just trying it for the first time. I turned on all of the options available which seemed correct based on the instructions that I had. I have contacted my sys-admin to try to find out what the monowall doesn't like. However, I am wondering if I might need to open an outgoing port on my linksys home router/firewall and, if so, which one?
I've just installed openSUSE 11.3 for the first time on a Dell E1505 notebook and am having problems connecting to my home wireless network. Using the Network Manager I've been able to find my home network and connect after entering the network password. After a minute or two the wireless network is still shown as active but their is no connection (websites will not load).
I'm completely new to Linux so I have almost no clue what could be causing this. I have tried connecting the notebook hardwired (Ethernet) to the router and get a perfect connection if that information helps any.
moved to Fedora 11 but can't figure out how to get my wireless working. I have the broadcom driver installed and the Network Manager Applet shows the available wireless networks, but when I click on them they just don't connect.I get the following output on lspci regarding the wireless adapter:03:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 02)
I'm having problems with my wireless card. The network manager won't allow me to turn it on. It is working in windows and in ubuntu, but I can't get it to turn on under fedora. I'm using a Lenovo B570 laptop and it uses the Centrino Wireless-N 1000 for wireless.
how to setup a home network for learning purpose. i have two laptops and a desktop connected to a modem-router for broadband (wired connection), i want to setup one as server and the others as client.
Since I installed fedora on my desktop (there is no other OS on my desktop computer at the moment) I can't connect to my laptop which has Windows XP installed on it, although I can normally connect to internet from both computers. Here is the drawing to illustrate how everything is connected:
On the picture you can see that the phone line goes to the ADSL modem. The ADSL modem is connected to the Wireless modem with LAN cable. Wireless modem is connected to my desktop computer with LAN cable, and trough the wireless connection to the laptop. Internet is working fine for both computers, but desktop can't see laptop and vice versa. What do I need to do in order to see the laptop?
7.2 Home Network Gateway. Has anyone used this gateway and will it support both desktop and laptop I ask this question because I use my desktop at home and when traveling the laptop. The desktop has Fedora and the laptop has cut my tounge out vista.
I am setting up Apache (Fedora 12) inside my home network. From inside my home network I access it without any problem. I need to set it up to access it from internet. I have the following questions. Here is temporary setup for testing purpose. Internet-->ADSL modem (SEIMENS Speed Stream 4200)---> Apache (Fedora 12)
1. Do I have to do any kind of ports forwarding on ADSL modem. (There is no option to do port forwarding on Modem) May be I need different Model of Modem?? 2. I tired to Ping my real IP for modem form another computer from internet. I am even unable to PING the ADSL 's real IP. Why it is that?
I use CentOS for the servers I am responsible for. This time, I inherited a piece of hardware that CentOS refused to boot up on, so I installed Fedora Core 14. I have NIS and autofs working -- mostly.The home directories reside on an EMC network storage device. The problem is that when I login as a regular user, all the files under the home directory are owned by nobody/nobody, instead of user/group. I believe this has something to do with NFSv3 vs. v4, but I have yet to find the right trick to fix it.
I know Windows forward and backward but I am so new to linux it's just wrong. I just installed fedora (like 1hr ago) on and old toshiba laptop with a WiFi PC card. Everything seems to work fine except. My Networks connects to my home Wifi network but it will not connect to internet. When it connects the IP address isn't even close to being in the same range as my other laptops and PCs. Like I said I'm new to linux but I'm wanting to learn. Any fixes for this issue? Which linus book is the best one to read for a beginner? Other then not connecting to internet I have no complaints.
I m nokia mobile to connect to internet in 11.2 configured it all in n/w manager with phone number *99#
APN: XYUX(as given by provider)
Also wrote the dns in resolv.conf but all in vain . it is not connecting neither dialing any number just shows "activating" but with no progress earlier in 11.1 i used kinternet (but i couldn't find it here) is there not any other dialer ? as i ve heard that n/w manager is quite troublesome.
I'm having some trouble connecting to the wireless network here at home. The PC has a Linksys WMP600N wireless network card, which works fine under several versions of Windows. In Opensuse however, I cannot get it to find the network. Even though my laptop is right next to it, which has perfect connection to the network. The router is a Linksys WRT610N.
I've tried running iwconfig and iwlist scan in the terminal, but the scan returns no results and iwconfig indicates it does not have a connection to a network. I've turned off IPv6 as I read this can sometimes cause issues. I've also tried issuing the computer a static IP address, figuring the DHCP might be causing problems, but all to no avail.
I am facing an issue connecting to WPA Enterprise network using a CA Root Cert. I have traced it to a bug report here [URL] when the fix is going to get push?
since a few weeks I have a problem connecting to other hosts when I'm using another wireless network, which has a different DNS IP than I have in my network. I have to change /etc/resolv.conf to change the nameserver. Can NetworkManager control the nameserver? If yes, how?
Iam trying to get samba work with no password on my home network. I want to have Writeble permissions for creating files and folders and sub folders in the shared folder with no password needed.
I have this set up
Code: # # Sample configuration file for the Samba suite for Debian GNU/Linux. # # # This is the main Samba configuration file. You should read the
[Code].....
I can access the /home/seb/ directory but cant write in it. And with the same permissions for the down directory I cant even access the folder from the other pc it only says "Could not display "smb://laptop/down".The file is of an unknown type"
And finally how can I clean up the smb.conf so it is readable?
I recently ran into a problem with my at&t vpn connection. I'm hoping someone in this forums may be able to help? It's been working beautifully then one day it just wouldn't connect. I'm wondering if AT&T may have something to do with this...? I have tried reinstalling agnclient-1.0-2.0.1.3000.i386.rpm and agnSUSE10Prep-1.0-2.i386.rpm but nothing seem to work.I'm running Linux 2.6.31.12-0.1-desktop i686System: openSUSE 11.2 (i586)KDE: 4.3.5 (KDE 4.3.5) "release 0"
Recently loaded 11.3 onto a virtual machine, however none of the network settings will allow me to connect to the internet. First time Ive had this happen, other distro's Ive experimented with connected with no problems. I recall seeing a similar topic some time ago (dont remember if it was here or another forum), but at the time, there had been no fix. Anyone know if this has been fixed?
Are there any limitations to connecting to a WPA2 Enterprise network with PEAP authentication on linux? Here at my university, on any major linux distro, I can only connect to the secure wifi 50% of the time and when I do successfully connect, it get booted off in a few minutes. At home I can connect to my WEP internet network easily.
Using Windows I can connect to my home WEP network and my university's WPA2 Enterprise network easily. Note: I work at the computing department here at my university, so I know that there is no anti-Linux mentaility which resticts access to Linux-based distros.)
I recently went back to Linux on my netbook because Windows 7 was too laggy (1gb of RAM, go figure). I've never been able to connect to the protected wireless network on my campus without using Windows, though, so I was hoping someone could help me finally get that figured out.
The school has a how-to for connecting to the network using various operating systems, including Linux, here (scroll down to the bottom to choose OS). After following the guide through the CA certificate it mentions, the network manager tries to connect for a while then just sort of times out and asks me to enter the information again. Using Wicd, I noticed that this timeout appears to happen when trying to obtain an IP (after authentication).
My system: Acer Aspire One AOA150 with an Intel 4965AGN wireless card (installed by me a few months back, have had no problems with the card itself not working). I've installed Kubuntu 9.10 Netbook edition and done all available updates. My campus offers an unprotected "Visitor" network that I can connect to without issue, but they limit what you can access using the unprotected network so I need to be able to connect to the WPA2 one.
I've tried getting help from on-campus IT but keep getting told that none of them know how to use Linux, which makes me wonder who exactly wrote the how-to on their website... The guides on the website are for older versions of Ubuntu, but I figured they would remain applicable on a later-version Kubuntu install.
When I try to use Nautilus to connect to another computer on my network, and I attempt to connect using the name of the Windows XP computer I am connecting to, I get the following error; Could not display "smb://computername/". Error: Failed to retrieve share list from server Please select another viewer and try again. However when I attempt to connect using the IP address on the network, it connects instantly. smb://192.168.1.101/ Why doesn't it connect using the computer's name? What am I doing wrong?
So, I'm stumped. Ubuntu studio didn't come with nm-applet, so I installed it myself. Now that I have it, I can't connect to my network. Here's the output I get when I run it in the terminal:
Code: ** (nm-applet:1979): DEBUG: old state indicates that this was not a disconnect 0 ** (nm-applet:1979): DEBUG: old state indicates that this was not a disconnect 0
The more I use Windows, the more disgusted I get with it lol. So I would really enjoy using Ubuntu on campus instead of Windows, but I can't seem to get it to work. They have PDF files explaining how to connect with Windows XP - Windows 7 and Mac OS X, but nothing for a Linux distro. Here is the link to the PDFs [URL], and here are the settings I've tried to use to connect [URL] . I know that the CA is right (unless I need to us the Ubuntu version).
i dosent get the wired network in my HP mini 2140 to work. It had worked before but today it stoped. I think it's the network card that is the problem. im running fedora 15.
I recently got a lenovo w510 laptop and I installed openSUSE 11.3 KDE on it. the wireless works fine at home (802.11g WPA2) when I go to work I have tried to set up the wifi for the 802.1X PEAP network but it doesn't look like it even tries to connect.
The work network set up is as follows. non-brodcasting SSID (do I need to tell network manager of this? I manually enter the SSID no problem)
Dynamic WEP 802.1X PEAP blank anonymous identity no CA cert (I suspect this might be the problem) PEAP v 1 MSCHAPv2
I have verified my username and pw several times, as well as the SSID. Just yesterday I helped a co-worker get on the network under ubuntu and it worked like a charm.
The Hardware profile displays the wifi card as a "WiFi Link 6000 Series" It is an intel card.
Recently I hibernated my computer, then when starting up again managed to boot into Windows instead. When I rebooted back into Ubuntu 10.04 my network card had stopped connecting to the internet.'s not a problem with my connection -- I'm posting this form Windows just fine. Using the network tools tool I can see that the card is inactive.I can use ifconfog to reactivate it, but it still won't connect.Attached is as many commands as I could find that provide information about the card
