OpenSUSE Network :: AT&T DSL - Not Connecting With KDE 11.2?
Apr 10, 2010
I installed KDE on a machine that also runs Vista. We used to have a partial T-1 line with router that ran fine with both OS, but we had to drop the T-1 and go with AT&T DSL, which runs fine with Vista, but won't connect with KDE. I have searched this forum, and others, but nothing seems to work. I also used the 'swerdna' fix, suggested on these pages a while back, but that also didn't work. Of course, AT&T offers no support for Linux.We went to Linux because we were having chronic problems with the Vista system, and would rather not have it at all
View 8 Replies
ADVERTISEMENT
Mar 7, 2010
I m nokia mobile to connect to internet in 11.2 configured it all in n/w manager with phone number *99#
APN: XYUX(as given by provider)
Also wrote the dns in resolv.conf but all in vain . it is not connecting neither dialing any number just shows "activating" but with no progress earlier in 11.1 i used kinternet (but i couldn't find it here) is there not any other dialer ? as i ve heard that n/w manager is quite troublesome.
View 7 Replies
View Related
Jan 24, 2011
I'm having some trouble connecting to the wireless network here at home. The PC has a Linksys WMP600N wireless network card, which works fine under several versions of Windows. In Opensuse however, I cannot get it to find the network. Even though my laptop is right next to it, which has perfect connection to the network. The router is a Linksys WRT610N.
I've tried running iwconfig and iwlist scan in the terminal, but the scan returns no results and iwconfig indicates it does not have a connection to a network. I've turned off IPv6 as I read this can sometimes cause issues. I've also tried issuing the computer a static IP address, figuring the DHCP might be causing problems, but all to no avail.
View 9 Replies
View Related
May 2, 2011
I am facing an issue connecting to WPA Enterprise network using a CA Root Cert. I have traced it to a bug report here [URL] when the fix is going to get push?
View 4 Replies
View Related
Aug 21, 2011
since a few weeks I have a problem connecting to other hosts when I'm using another wireless network, which has a different DNS IP than I have in my network. I have to change /etc/resolv.conf to change the nameserver. Can NetworkManager control the nameserver? If yes, how?
View 3 Replies
View Related
Mar 1, 2010
I recently ran into a problem with my at&t vpn connection. I'm hoping someone in this forums may be able to help? It's been working beautifully then one day it just wouldn't connect. I'm wondering if AT&T may have something to do with this...? I have tried reinstalling agnclient-1.0-2.0.1.3000.i386.rpm and agnSUSE10Prep-1.0-2.i386.rpm but nothing seem to work.I'm running Linux 2.6.31.12-0.1-desktop i686System: openSUSE 11.2 (i586)KDE: 4.3.5 (KDE 4.3.5) "release 0"
View 2 Replies
View Related
Sep 28, 2010
Recently loaded 11.3 onto a virtual machine, however none of the network settings will allow me to connect to the internet. First time Ive had this happen, other distro's Ive experimented with connected with no problems. I recall seeing a similar topic some time ago (dont remember if it was here or another forum), but at the time, there had been no fix. Anyone know if this has been fixed?
View 5 Replies
View Related
Jan 21, 2011
Are there any limitations to connecting to a WPA2 Enterprise network with PEAP authentication on linux? Here at my university, on any major linux distro, I can only connect to the secure wifi 50% of the time and when I do successfully connect, it get booted off in a few minutes. At home I can connect to my WEP internet network easily.
Using Windows I can connect to my home WEP network and my university's WPA2 Enterprise network easily. Note: I work at the computing department here at my university, so I know that there is no anti-Linux mentaility which resticts access to Linux-based distros.)
View 4 Replies
View Related
Apr 21, 2010
I'm trying a long time to configure my 3g modem to connect.I had tryied using the KDE Network manager and the modem stay in "Waiting authorization" for ever ^^.The KDE Network manager runs ok in Kubuntu.I had tryied download and install kppp, but kppp don't open my modem (/dev/ttyUSB01)Then how can I configure my modem?
View 1 Replies
View Related
Mar 14, 2010
I've just installed Direct Connect P2P and after searching for hubs and setting everything according to this DC++ Guide: Getting Started , I searched for hubs. After connecting to the hubs, DC++ suddenly closes. It happened quite a few times before I gave up. What is wrong here?
View 3 Replies
View Related
Dec 8, 2010
My 11.3 keeps dropping the network connection. After a few minutes of websurfing, it decides to quit connecting to the router. The windows machine behind the same router keeps working properly. I disabled IPv6 and rebooted, but still doing same the thing. The router is the DHCP server. I have tested the CAT5e wire, and it works fine.
View 8 Replies
View Related
Feb 26, 2011
I just bought a new USB wireless adapter for my openSUSE 11.3 laptop, a TP-Link TP-WN727N. I can't get the new card to connect to my home wireless network, which is named WRT320N in the screenshot. KDE prompts for the key repeatedly but never connects successfully. Part of the problem might stem from the fact that this laptop now has 2 wireless cards: one build into chipset (PRO/Wireless 3945ABG) and the new USB card. Both show up in knetworkmanager but no clear distinction is made between them visually. Strangely my wireless network shows up twice in knetworkmanager as in the screenshot. Once per wireless card? As my wireless network is N-only I don't see why it would do this.
View 9 Replies
View Related
Apr 9, 2011
Just moved over to openSUSE 11.4 (KDE) from Ubuntu, yesterday. However, I'm having some trouble with my wireless connection.
I have a wireless network with a hidden SSID and WPA2-PSK security. I entered all the nescery information into the KDE network manager, but it couldn't find my network. So I ran the usual command:
Code:
su -c iwlist wlan0 scanning essid [My SSID]
At which point, the network manager immediately found, and connected to, the network. However, it seems that I have to run this command (as root) each time I log in, before my laptop will connect to the network. The network manager has no problem find the plethora of unsecured networks as well as those that are secure, but broadcast their SSID.
View 1 Replies
View Related
Apr 22, 2010
I've spent 29 hours trying to figure this out. And I'm about to blow my brains out. Fresh install 11.2. - 64bit but tried 32 bit and same thing. Dell studio 1734. Broadcom wireless and wired. Installed broadcom drivers (b43) through yast. Wired eth0 works. Wireless eth1 works. Surf with Firefox fine. BUT. Kmail will not connect through wireless. Nor can I access repositories through wireless.
Tried blacklisting B43 in ssb no change. What in the hell is going on? I've searched forum after forum and tried everything and CANNOT make this happen.
View 9 Replies
View Related
Apr 28, 2011
I installed Gnome 3.0 with One Click install and after reboot KDE Network Manager shows all the wifi access points but clicking on them doesn't do anything seems like the click doesn't work on it.
I want to remove GNOME 3 completely from the system, what step should I follow?
View 4 Replies
View Related
Jun 24, 2011
After a recent installation and update I am having problems connecting to the internet even after following the steps in [URL]... Configure a network card in Suse/openSUSE...." It doesn't always connect when I boot and there is no connection icon on the panel nor the KDE desktop. Can someone assist me with this problem?
View 9 Replies
View Related
Mar 3, 2011
im having problems installing TP-Link TL-WN851N on suse 11.3, no internet activity at all
View 4 Replies
View Related
Jun 17, 2010
I am regular user of windows, but one week ago I installed ubuntu, it was very cool and then I installed opensuse yesterday because I like its kde desktop. But i have problem with wireless, i can see my home wifi, but it doesnt connect. I have same problem in ubuntu, but it was solved when i change passphrase to 40/128 bt from 128 bt, but in opensuse, all i can see is 128 bt or 64/128 ascii. Also I m unable to play mp3 songs in opensuse.
View 5 Replies
View Related
Jan 22, 2011
I've just installed openSUSE 11.3 for the first time on a Dell E1505 notebook and am having problems connecting to my home wireless network. Using the Network Manager I've been able to find my home network and connect after entering the network password. After a minute or two the wireless network is still shown as active but their is no connection (websites will not load).
I'm completely new to Linux so I have almost no clue what could be causing this. I have tried connecting the notebook hardwired (Ethernet) to the router and get a perfect connection if that information helps any.
View 3 Replies
View Related
Nov 7, 2010
I have done a fresh install of the OS and I am having wifi trouble. I am failing in connecting to an access point that Windows works fine with on the same machine. As far as I can tell it is connecting but not getting an IP address via DHCP. when running ifup it says its backgrounding getting an ip address.
View 9 Replies
View Related
Jan 31, 2011
im trying to connect two computers on lan.One computer has: VMWare Workstation and has Opensuse 11.3 mounted in it.The other computer has: VMWare Player and has Opensuse 11.3 mounted in it.Both computers are connected to a switch with cables.I have followed this guide in both computers:Depanati singuri calculatorul!: Opensuse 11.3 - configure local networkin order to setup a network.In one computer, if i go to: Computer---Network---Network folder, i only see one machine. When in fact i could see both of them right
View 9 Replies
View Related
Aug 16, 2010
I am running vsftp on one of my systems and when trying to connect to it it errors out with this: vendion@Loki:~> ftp 192.168.1.100 Connected to 192.168.1.100. 500 OOPS: could not bind listening IPv6 socket
I have tried stopping the firewall and even disabling IPv6 nothing changed, any clues as to what is going on?
View 5 Replies
View Related
Sep 20, 2010
Currently my office use a Cisco Firewall which will only allow the ANYCONNECT utility to do the vpn connection. I found a Linux utility (OpenConnect) which will do the same thing, but allow me more flexibility with my networking needs.What I ultimately would like to have is to have a switch that I can connect any network device into it and be connected to the office. IE (my IP Work Phone and Computer) Currently I have is a computer with fedora 13 and two network cards eth0 (home network - connected to a router) and eth1 which I would like to connect a switch to. OpenConnect communicates fine and I can see the work network from the Fedora machine. It creates a vpn0 tun/tap device and I don't know how to pass communication to/from the eth1 device.
Do I try to iptables the ports for the phone and services I need on the computer? Or do I build bridge; and If I do what am I bridging. I have tried making a bridge from eth1 to vpn0 which reply's with unsupported device or something like that.Unfortunately my network skills are bit limited and my office says "it can't be done". Their solution is for me to buy a ASA5505 (or something device) and have a static IP. I would have to make it work as my router and even then it will only DHCP 10 ip addresses; which will cause a shortage of IP addresses in the house.
View 1 Replies
View Related
Jun 17, 2010
Every time I connect my notebook to a network (wired or wireless) it freezes. I have no clue what might be causing this.
View 4 Replies
View Related
Apr 7, 2011
I am having some trouble getting my computer to connect to my wireless network. There is a wireless icon in the system tray. When I click on the icon I get a list of SSIDs associated with available wireless networks. To connect to one of of those networks I move the cursor over the SSID, the SSID is then highlighted, I select the highlighted SSID, then my computer connects to the selected network.
Sometimes the SSID associated wth my wireless network does not show up on the list. Sometimes it does. Normally the SSIDs on the list are in bold lettering. When the SSID of my network does appear it is in shaded lettering. When I move the cursor over the SSID it is not highlighted and I cannot select it. So you see it is not possible for me to select the SSID of my network and connect to my network.
The computer I am running is a ThinkPad R40. This is the wireless controller on the computer. I got this with "lspci". 02:02.0 Network controller: AIRONET Wireless Communications Cisco Aironet Wireless 802.11b
View 1 Replies
View Related
Jun 22, 2010
I have the latest ubuntu and it seems to be all fine except I am trying to connect to my mshome XP network without any luck. I have installed Samba and in Network places it shows Workgroup and MSHome. Click on MSHome and I see my XP boxes.
Click on an XP box and I get.. You can stop this op etc' then I get the 'Unable to mount - Failed to retrieve share list from server' error. I have been on this for 3 days now and just about over it I'm sorry to say. The forums are thick with threads like mine without any definitive answers. I had a distro called MEPIS on before Ubuntu and with these same machines I was able to connect to the network without any problems so I am baffled why I can't now.
View 3 Replies
View Related
May 11, 2011
I am having trouble getting my wireless card to connect to my network. I believe I have done everything correctly. Here is my wpa_supplicant.conf file:
Code:
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
eapol_version=1
ap_scan=1
[Code]....
I have never connected to a wpa network using slackware before, so I am not entirely sure how to use wpa_supplicant. I have altered the conf file, then tried dhcpcd and it times out.
View 7 Replies
View Related
Mar 19, 2010
how to connect my laptop with centos5.3 to connect to a wireless network.
View 2 Replies
View Related
Jun 12, 2011
Im running Fedora15 on my Acer4820tg and im having some issues:
1. I cannot connect to a wireless network with an hidden SSID. When i click "unknown" in the NetworkManager, it just disappears, and nothing else happens.
2. My laptop has two videocards and i would like two disable one using vgaswitcheroo. But the file which i used with ubuntu doesnt exist (/sys/kernel/debug/vgaswitcheroo/switch).
View 1 Replies
View Related
Mar 2, 2010
I recently went back to Linux on my netbook because Windows 7 was too laggy (1gb of RAM, go figure). I've never been able to connect to the protected wireless network on my campus without using Windows, though, so I was hoping someone could help me finally get that figured out.
The school has a how-to for connecting to the network using various operating systems, including Linux, here (scroll down to the bottom to choose OS). After following the guide through the CA certificate it mentions, the network manager tries to connect for a while then just sort of times out and asks me to enter the information again. Using Wicd, I noticed that this timeout appears to happen when trying to obtain an IP (after authentication).
My system: Acer Aspire One AOA150 with an Intel 4965AGN wireless card (installed by me a few months back, have had no problems with the card itself not working). I've installed Kubuntu 9.10 Netbook edition and done all available updates. My campus offers an unprotected "Visitor" network that I can connect to without issue, but they limit what you can access using the unprotected network so I need to be able to connect to the WPA2 one.
I've tried getting help from on-campus IT but keep getting told that none of them know how to use Linux, which makes me wonder who exactly wrote the how-to on their website... The guides on the website are for older versions of Ubuntu, but I figured they would remain applicable on a later-version Kubuntu install.
View 2 Replies
View Related
