OpenSUSE Network :: Setting Up 11.3 To Access Printers On Windows Server 2003 Via Samba?
Sep 7, 2010
I'm trying to set my openSUSE desktop up to use the printers on my office network via Samba. I managed to get it working in 11.2 but 11.3 is giving me some trouble.I am able to access the printers and use them but I have to enter my network credentials each time I print. In 11.2 I was able to "save" my username/password and was not required to do this. Are there any Samba packages I need to add in addition to the basic ones? There seems to be a lack of documentation on this particular subject, most is concerning Windows clients printing on Linux print servers.
View 2 Replies
ADVERTISEMENT
Nov 1, 2009
is possible configure a samba server to a Backup Domain Controller in a windows 2003 Domain ? I have a Primary Domain controller Windows server 2003 , can integrate my network with a linux samba Backup Domain Controller server ?
View 1 Replies
View Related
Oct 15, 2009
Wanting to join my CentOS5.3 to a windows 2003 active directory. Configured kerberos and samba.
Code:
[libdefaults]
default_realm = domain
dns_lookup_realm = false
[code].....
View 5 Replies
View Related
Jul 3, 2010
I've been searching around the web for help and have been really pulling my hair on this one. I have a Windows 2003 Server w/ AD on it. I have two linux machine, both running the same version of RHEL 5 (compute-1, compute-4)
When I log into compute-1, and do an "id dhuynh", I get this:
uid=1501(dhuynh) gid=1500(domain users) groups=1500(domain users),2013(dusers),1501(certsvc_dcom_access),1507 (BUILTIN+users)
When I log into compute-4, do do the same command, I get this:
uid=1500(dhuynh) gid=1504(domain users) groups=1504(domain users),1505(certsvc_dcom_access),1501(BUILTIN+user s)
Notice that the uid and gid are different. How do I get them to be the same? This is affective the file permissions in certain shared directories. I've check /etc/samba/smb.conf and they are identical. I also check /etc/nsswitch.conf and they are identical too.
View 2 Replies
View Related
Mar 22, 2010
I am trying to connect to a Windows 7 PC through Samba, and while samba can find the Windows 7 PC, it cannot access it, asking for a username and password instead. However, I can access the another Windows XP share perfectly fine.
View 2 Replies
View Related
Oct 28, 2010
host is windows 2003 server 64-bit
guest is ubuntu 9.04 server 64bit
Qemu : 0.11.1
Qemu manager: 7.0
from Qemu manager, if network card is using User Networking, it's a NAT and I can see that Guest Ubuntu has an ip address 10.0.2.15 and is able to access the internet. However, as Guest ubuntu is running server so I want to do use Tap networking and I assue with Tap, the Guest ubuntu will get an ip address which is in the same subnet as host machine by dhcp. so from Qemu Manager 7.0, I changed Network card to be:
NE2000PCI
Vlan Number =0
VLAN Type: Tap Networking
Mac address: tap0's mac address from host
TAP Network Adpator: Tap0
Note that tap0 was created by openvpn. and then fired Ubuntu guest, ifconfig shows no ip address on eth0 (which has the same mac address as Tap0) so the guest Ubuntu has no ip address and can't access public.
View 1 Replies
View Related
May 23, 2010
How do you configure the firewall to allow external web access (it's a LAMP server) and internal access for samba shares ?
View 6 Replies
View Related
Jan 19, 2010
i work in an office with individual p/c's (all with windows xp) connected to a windows server. i have installed opensuse 11.2 on my work's p/c (as a dual boot) but have no idea what to do so that i can access files on the windows server. can some kind person point me in the right direction.
View 3 Replies
View Related
Apr 15, 2010
I need help setting up network printers I have two computers, they both have ubuntu on them. The internet comes in to the first computer on a usb modem, it is routed out from ethernet to wireless. I used CUPS on computer two and printed out a test page that worked, but it won't print out anything else.
View 1 Replies
View Related
May 31, 2010
Im having trouble setting my SAMBA server correctly. I have two Win machines, one with WIN7 and one with XP. I have one Ubuntu machine and Ubuntu Server 10.04. My problem is that I can only acess files from the Win 7 Machine. When I try to map out the shared dirs on my serverI get asked for user and password, when I enter my creditensials it dosent help.. What to do? I used the sample smb.conf file and open for no restrictions..
[Code]....
View 9 Replies
View Related
Mar 12, 2011
I noticed that KDE does not have a way to browse for network printers like Gnome does. I installed system-config-printer to fix this(if there is a KDE route that would be nice as well). Anyway, I go to add a printer and select "Network Printer" and click "Windows Printer via SAMBA". This is where i would typically press "Browse..." but it is unclickable. This leads me to believe that I am missing a package. Essentially my question is: What are the necessary packages to access Windows printers via SAMBA with system-config-printer?
View 3 Replies
View Related
Aug 19, 2009
i'm following the tips from Samba and Suse: HowTo Set up an openSUSE-Windows Home Office LAN/Network. Versions 10, 11 to set up samba and tweak it to my needs.
View 9 Replies
View Related
Apr 26, 2011
i'm trying to add windows print drivers to smb for them to be automatically downloaded to the client upon printer installation. I've followed the samba.org Printing documents which have been helpful to some degree. I have an HP printer and i'd like to just upload and register the .inf,.dll.cab files that the manufacture cd comes with for the client to use the .inf file to install the drivers from that location but i keep getting Werr_invalid_PARAM
here is the syntax of what i'm trying to do.
rpcclient -d 4 -U 'username%password' -c 'adddriver "Windows NT x86"
"HP_Color_LaserJet_3800:hpbicoin.dll:hpc3800c.inf:hpc3800c.cat:hpc3800c.cab:hpcp3800.cf_6i2arww.cab6i2caww.cab6i2csww.cab' Server
View 9 Replies
View Related
Mar 14, 2011
I can't seem to connect to it when using windows 7. Both are in the same workgroup (W0RKGR0UP) and I have set DHCP address for the ubuntu box. Is there any other thing that I would still need to edit ? My router address is 192.168.0.1 and the fixed ip for ubuntu box is 192.168.0.103.
View 4 Replies
View Related
May 10, 2010
Can anyone point me in the direction of setting up shares for windows machines on centos. I have found a few document but never managed to get it up and running correctly. I need to be able to get access to subfolder etc for different users. Is there any way of doing it with some sort of gui?
View 2 Replies
View Related
Feb 8, 2010
I have set up RHEL 5 file server with Winbind and samba services running.I am able to assign and authenticate windows XP users against my RHEL 5 server.No issues.But one or two of my users are using Windows 7 Ultimate edition and they are not able to access my network samba shares.I can view the shares in windows 7 box but trying to access gives me "network access denied error".But i can access the same share in Windows xp machine for the above tested users.Working great but not in windows 7 box.I haven't tested with Vista OS yet.
View 2 Replies
View Related
Mar 29, 2011
I'm trying to load a HP Proliant w/ Fedora 11 and setting up as a WFS using Samba. However, I'm a bit confused on how to do it. Right now I have 2 36.4GB drives in RAID 1+0 and 4 146.8GB drives in a RAID 5 config. I wanna use the smaller drive for the OS and the bigger drive for the storage. I've managed to load the OS fine, the problem is I can't figure out how to mount the 4 146.8GB drives as a single logical volume and set Samba to use it. Right now all the RAIDs are setup using the built-in Compaq Smart Array utility (or whatever it's called) that's built into the SCSI hardware or BIOS.
View 1 Replies
View Related
Mar 25, 2010
Installed a security update for samba tonight via Opensuse updater.Now, when trying to access my home network an authentication box pops up (never used to)Asks me to enter authentication for my home network.I enter my username and password and hit enter. After a few seconds the authentication box pops up again askingfor the same indicating I have entered the wrong username / password combination (which I know I have not).
View 9 Replies
View Related
Mar 23, 2010
I'm running Ubuntu 9.10, and am getting the following error when I attempt to access the HADEN workgroup on my Windows network via Samba: Unable to mount location - Failed to retrieve share list from server. I ran the following command:
Code:
peterv@MBP17U:~$ findsmb
sh: /usr/bin/nmblookup: not found
*=DMB
+=LMB
IP ADDR NETBIOS NAME WORKGROUP/OS/VERSION
[Code]...
On my Windows XP machine, I can see the Ubuntu directory and can access files on it. I just can't access the Windows workgroup from Ubuntu.
View 1 Replies
View Related
Nov 26, 2010
I have just configured samba on suse linux. I can see it in the windows workgroup but i cannot access it. When it says the server is not accessible. You might not have permission to use this network resource.I have attached a copy of smb.conf
View 2 Replies
View Related
Mar 4, 2011
I cannot access my Ubuntu samba server using windows XP or 7. I keep getting prompted for a username/password. I have created both a unix username with password and a samba username with the same password i used for the unix user. When windows prompts me for the username/password i give it the same one i created on the samba server, but it still will not take it. I know samba is running because i can view the shares but cannot access them without getting prompted for username/password. I just have the one user for now while i am testing, but there will be more.
I am using Ubuntu Desktop 10.04.
View 2 Replies
View Related
Jul 7, 2010
So I setup the newest Ubuntu on my old desktop on a 30g HD and have 2 200G HDs with a ntfs file system on those two. I got SSH and FTP configured, then went on to setup Samba.I have it (seemingly) set up well. /dev/sb1 gets mounted on /data1 /dev/sc1 gets mounted on /data2.I want anyone connected to my router to be able to see this machine and be able to read and write to both shares.
I configured WINS on my laptop to point to the linux box. and i've seen the pc in question (TECH-PC) in "My Network Places" on both of our laptops.Long story short, I try to connect to my network share and it says i don't have permission and i need to contact my network admin. This computer is the only one with Linux installed, the rest are windows-OS.Let me know if you need more info, pretty stumped here, have searched, read, scrapped my install and started from scratch, maybe i need to sleep on it
View 5 Replies
View Related
Feb 27, 2010
I am using RHEL5 in that i have installed samba rpm as well as created samba users while access the shared folders in WINDOWS i got "access dined" error.
View 1 Replies
View Related
Dec 10, 2010
I have 3 computers. One running openSuse 11.3 with SAMBA and the other 2 are Windows 7 Professional boxes. I have the same user name and passwords for all three boxes.
From the Linux box I can access one of the Windows 7 boxes but the other won't accept my user name and password. The one that won't accept has Windows LiveID Sign-In Assistant installed. Apparantly that's an automatic install now.
I've read that there is a bug with the SAMBA libsmbclient [URL].
I tried updating via YAST but still end up with version 3.5.4-5.1.2 and this doesn't work.
View 1 Replies
View Related
May 30, 2010
I am using Ubuntu 10.4 LTS and Samba3.4.7.I have read a lot of posts and different web pages on setting up Samba on a Peer-to-Peer network with Windows XP but just cant make it work. I can see the Guest account in XP My Network Places but cant access the folder when I click on it.Network not accessible or you dont have permission. I can PING both ways ok. I have Firestarter turned OFF and I dont have any third party firewall on XP.
This is my samba config file:
[global]
netbios name = dolphin
server string = Ubuntu
workgroup = WATERLILLY - same as XP
[code]....
View 3 Replies
View Related
Apr 13, 2010
I have a samba server on my LAN. It can be accessed without any problems from Windows machines on the LAN without password. I have two computers that I have updated to OpenSuse 11.2 (both used to run 10.3). Since doing this upgrade I can no longer access the samba share from the Suse machines. Basically, both Dolphin and Konqueror ask for a username and password to access "avoca" (the workgroup).
View 9 Replies
View Related
Aug 14, 2010
I just need to be able to to access my Windows PC from openSUSE 11.3. Does anyone know where to start?
View 9 Replies
View Related
Jul 16, 2010
I want to install Samba server to access a shared folder in Solaris box on a windows box
View 1 Replies
View Related
Jan 28, 2010
I've been using Kubuntu 9.10 for several months now. For most of that time, I configured and used with no problem several network printers.. a HP LaserJet 3015 at home connected to a Windows machine, and a Xerox Phaser 8560 at my coworking space connected directly to a router.
However, several weeks ago I was at the coworking space, requested a print from my web browser, and in the printer selection dialog, observed the list of printers expanding... some sort of autodetection of network printers was occuring, and multiple instances of the same printer were being offered, with slightly different names. Printing to these devices did not work.
Now, after a reboot, there are NO network printers available no matter what network I'm connected to. When I use the Kubuntu printer configuration tool and try to set up a new printer, it asks me to "Select a connection" to which the only option it gives me is "Other". When I put in an address for the printer it just cycles endlessly, never finding anything.
View 3 Replies
View Related
Aug 28, 2010
I have currently have opensuse 11.2 installed. I am trying to setup samba shares which you can only access as certain user. Currently looks like the only way I can access these share is use root username/password!
I want to which GUI I need to use to setup this up properly. And of course what setting to exactly to use.
View 2 Replies
View Related
