I want to upload some files via ftp and after that to access them via http (i have apache2 installed and configured properly) I can't use a ftp with system users because they are located in home.. it should be something with virtual users but the problem with be the file permissions.
View 4 Replieswe have a server running with Suse linux many years. Meanwhile we changed server hardware about 4 times, mostly also updating to newest Suse version. We used to copy group, passwd and shadow to a backup medium, installed the new system and restored those files onto the new system and all was running fine. Now, some weeks ago we installed 11. on new hardware and after restoring those 3 files after rebooting the system hangs when starting GUI. I can boot into runlevel 3 and login with no problem, but when I boot into runlevel 5 mouse and keyboard are frozen. Also when starting GUI from runlevel 3 with startx mouse and keyboard immediately freeze. If I restore the files group, passwd and shadow as they came from fresh new installation I can reboot and login in runlevel 5 without problems.
OK, if I compare the userlist, as it is generated bei installation,there are some usernames I formerly not had in older Suse versions. I don�t know if this can make problems? I tried to edit the files, to combine the system users from 11.2 with the list of local user names from the old system but without success, again the mouse and keyboard freeze.So some questions arise:1) Why now mouse and keyboard freeze in xsystem, when there are changes in the user list (but only in runlevel 5)2) What is the correct way to save and restore users and groups from old to new system. I googled several hours but did not find a smart way. Maybee someon can point me to a link or a howto where I find the solution
I am using openSUSE 11.2 with active directory for authentication. I configured it using the Window Domain Membership YaST2 module and I can login successfully (although unreliably). The problem is that I need the UID and GID of the users on my computer to match the UID and GID assigned by Active Directory. Currently it just assigns UIDs and GIDs starting at 10000, which is completely different than the UID and GID used by Active Directory and by other Linux computer runs by the school (those use CentOS). Does anyone know how to get my openSUSE computer to assign UIDs and GIDs from Active Directory?
View 3 Replies View RelatedNow I have my ldap server doing authentication and providing autofs maps perfectly the next question ... is there a utility anywhere that will allow me to stuff 1200 users into the ldap server from a csv file
View 4 Replies View RelatedWe have reason to ask this of you following some strange firewall behaviour - But don't panic If you use openSUSE 11.2 and you think: Your Firewall should be running You are not sure but think it should be check and report back here.
This is how to check:
Go to Yast > Security and Users > Firewall
I have a firewall/router box running openSUSE 11.2 between the outside world and the LAN. This router also provides DNS for the LAN and has SuSEfirewall enabled. LAN users need (almost) full access to the internet. However, I want to block certain sites which are not required for work (you name it: facebook is my candidate). What is the most elegant way to block certain sites (which have quite a lot of different IP numbers) ?
View 2 Replies View RelatedI wanted to use ldap to create users on my machine.I got LDAP set up via yast, and it seems to work OK. But when I create a user via LDAP, the system doesn't seem to want to know.LDAP actually creates a home directory for the new user, but the system merely assigns it a UID and nothing else.I have access to another opensuse system which does not behave in this way. I.e. I can set up a user exclusively in LDAP and the system will recognise the new user no problem.I have compared the two ldap configurations to see if there's some magic "propagate LDAP users to Local users" setting, but this doesn't appear to exist
View 2 Replies View RelatedUsing SLES11, squid 2.7, NO TRANSPARENT PROXY, and work fine. Now i need permit a some users only access to a pop from external mail (outgoing mail authenticated)
# Private interface
IF_PRV=eth0
IP_PRV=192.168.1.1
NET_PRV=192.168.1.0/24
# Public interface 1
[Code].....
Are there any basic iptables rules to do this? How to procedure with Yast Firewall for this requeriment?
I have currently have opensuse 11.2 installed. I am trying to setup samba shares which you can only access as certain user. Currently looks like the only way I can access these share is use root username/password!
I want to which GUI I need to use to setup this up properly. And of course what setting to exactly to use.
script which can add a secondary group to all existing users except system users in linux.
View 5 Replies View RelatedI installed SLES 10.2 with SAMBA 3.5.5.43 to retire our old Microsoft Windows 2000 Server and save some money. All was fine until last week when our chief asked to me to set password expiration for all clients. This morning, all users cannot logon because, when they logon, windows asks to change password and then it gives error error "Access Denied".
[code]...
I've just installed OpenSuse 11.3 on my new laptop but I've skiped the network configuration during the installation of system, but after that when I use the command : dhclient eth0 I'll be connected without any problem except when I reboot the system, I should retype the command to connect
View 3 Replies View RelatedIn the LiveCD there is an Icon. You can see it left of this pic.
This Icon is missing in a FULL INSTALL of openSuSE, how can I make it shown up.
I have KDE Desktop.
openSUSE 11.4 | SUSE Linux | Beginner's guide to multimedia codecs MP3 DVD 3D nvidia ati wireless wi-fi netbookplease see the second image under wireless driver installation in above link.it is a image of a network manager when we clicked the network manager icon in system tray.but i am not getting the like that.if i click that icon i will see only a small window only with enable networking,enable wireless and manage connections only.how to get a detailed windows like that in the image.
View 9 Replies View RelatedI am relatively new at Linux and am having some problems with an install of openSUSE 11.2. I installed 11.2 on my Thinkpad X31 dual boot with WinXP. It seems to work very well except the network. I looked up swerdna's instructions on setting network cards up. I used YaST to try and set the system up as described in swerdna's instructions. Everything looks fine my network card and wireless card show up in the overview settings screen and everything sets up fine. But when I exit YaST the network doest show up no icon in the system tray and it doesn't even try to connect.
I did go into hardware to see if it was identifying my hardware and my network card shows up as "Thinkpad R40" and the wireless shows up as Cisco Aironet Wireless 802.11b. As far as I know this is correct. I have tried three other distro's and this one has gotten the closest to working so far.
the KDE 4.0 desktop and OpenSUSE. Like a knucklehead I removed the NetworkManager applet from the system tray. How do I get it back thereor, even better restore the default setting for my desktop?
View 1 Replies View RelatedDon't worry, I know - that title probably makes this question seem way more complicated than it actually is. Here's the situation: I have a server running SLES10 with a samba share set up on it. I created a username in Samba and Linux for myself, can access the share, permissions are fine, yadda yadda. Now I want to give about 100 more people access to it.
I have active directory running which users log into and I'd like them to be able to use their active directory passwords to authenticate to the share, rather than have me create 100 individual Samba/Linux accounts. In the future the AD server will be changing over to server 2008 but I'll cross that bridge when I get there. It would be equally effective if I could pull AD passwords from AD and "auto-create" the associated Linux/Samba users. Any ideas or could someone point in the right direction?
I'm niomi and I'm the first account with sudo. I add an account, bob. niomi can get in reliably on active mode. (maybe relevant?: passive doesn't work) bob is jailed to his home directory, niomi is in ftp-special which gives her access to /. bob can't log in and his shell is set to bin/false. What could have gone wrong?
View 3 Replies View RelatedIn other Linux distros I've used, new users are assigned to their own group (i.e. user 'joe', group 'joe') by default. To my surprise, when I create new users with my openSUSE 11.4, they are all assigned to the 'users' shared group by default.To test this, I created a new user called 'friends'. From my terminal, I can see how the new user files look like:
joe@linux:~> ls -l /home/friends/
total 40
drwxr-xr-x 2 friends users 4096 Sep 3 11:37 bin
[code]...
I have a big problem with my home router / server. The symptom is an alomst complete death. The other computers in the house can use the internet, i.e., the PC is not completely dead, but actually routes. However, it suspends all direct traffic: SSH becomes irresponsive, SMB shares disappear, and so on. It cuts traffic even with a VMWare guest it runs. I can ping it, but that's about it.The worrying thing is that it starts slowly. In the beginning it will start by cutting SMB pipes. It will then become very slow, to the point it won't execute a "shutdown" command.Then I sometimes have flood on port X, "sending cookies". That is certainly due to the P2P program, but cold a sustained flood affect communications on the virtual network adapter vmnet8?And then it enters this catatonic state with no special mention on the log.
View 5 Replies View RelatedUpgraded from 11.2 to 11.3 without any issues. However the newer version of Firefox keeps crashing and bringing down 11.3! It's a complete system crash with absolutely no warning, although it looks like 11.3 is trying to send the TERM signal before the pc shuts down.I have other browsers for my work, and both Opera and SeaMonkey work perfectly.Konquerer also works perfectly.
View 2 Replies View RelatedI don't know how to change the dns to the dns of Google 8.8.8.8 as primary and 8.8.4.4 as secondary
in version 11
there is icon marked as update dns service via dhcp after u unmark it u can put it manual
in 11.3 there is no icon
+ there is no separate icon for the dns configuration in the network service category
so how can i change the dns?
the steps for how to connect my system to existing LAN.
View 3 Replies View RelatedI have two ethernet cards eth0 and eth1:Where the internet is cable is conneted to eth0 I have another system i have connected a cable through eth1 to my second systems network cardnow i am able to access the internet on eth0 i.e.,on my first system ..ow can i share the internet which ius coming from eth0 to another system using eth1
View 4 Replies View RelatedI am trying to connect to a vpn through vpnc.
It hangs at the end and I can see in /var/log/messages "modem-manager: (net/tun0) could not get port's parent device" and then eventually "withdrawing workstation service for tun0".
My settings are correct and other people seem to be able to connect.
I am not using KNetworkManager because of an issue on my machine regarding rfkill.
After last kernel update (2.6.31.8) when I try to connect to access-point my system freeze.
I use realtek network card (rt2860sta module).
since upgrade to suse 11.3 every time I reboot pc the file /etc/hosts is reset to default value. I am a web developer so I need to put in there my aliases for 127.0.0.1. It is annoying to do it again and again. Luckily, I don't restart my system very often but still I would like to avoid that.What should I do to stop this resetting? Or is there another place in 11.3 where should I put my entries?
View 9 Replies View RelatedHow I setup my NetworkManager to use the correct host name on my system, if that is possible. NetworkManager ignores the specified hostname and uses 'localhost', which is a bit annoying.
View 9 Replies View RelatedI'm running opensuse 11.2 on my Asus 1000H, today I found the new kernel Kernek-Desktop 2.6.31.8 will cause system lock down when I try to connect to any wifi assess point. I updated to 2.6.31.8 from Opensuse-11.2-update days ago and today it's my 1st time to try to connect to wifi with this new kernel.
Downgrade to 2.6.31.5 will solve this problem.
So the only experience I have with Linux is all from Ubuntu, and I just spontaneously decided that I needed a change...two days later my triple boot Macbook Pro got slimmed down to a dual boot OSX/OpenSUSE 11.2 machine. But there are some general problems, and I have absolutely no idea how to solve them. First, wireless isn't recognized at all...there isn't even a space for wireless connections. Second, I haven't been able to get compiz to work yet, and I can only suspect that the system doesn't recognize my video card, or the driver isn't installed. Yet again, no idea how to fix this.
View 9 Replies View Related