How I setup my NetworkManager to use the correct host name on my system, if that is possible. NetworkManager ignores the specified hostname and uses 'localhost', which is a bit annoying.
View 9 Replies1) My Internet connection is COMCAST with a router box and one public IP address.2) My web server is Apache using 10.1.10.200 as its address.3) Now I want to add another host name (www.myhealth.com) on my server. I did DNS forwardin (with Godaddy) to my COMCAST static IP address.4) I also added (in my httpd.conf) a block for virtual hosting
View 4 Replies View RelatedI have a mac and an openSUSE box connected wirelessly to a router. From my mac, if I ping the Linux machine by both ip address and hostname "elmo.local", I get a response. If I ping my mac from the Linux machine using its ip address, I get a response. However, if I ping the mac from the Linux box using its name "kermit.local" - nothing!
This means in order to share files between them via the network, I have to use the ip address rather than name, but I'd rather not. When I had Ubuntu installed instead of openSUSE this all worked fine out of the box, so I'm assuming it's a problem with the setup of openSUSE rather than the router or the mac.
Im trying to setup multiple domU through the default bridge setup. I am able to access only one of them through the network at a time. If you ping one of the domU it works perfectly but you cannot ping any of the others until you stop pinging the one and even then it takes a bit before you can. Ive looked around for a while and seen similar problems but nothing ever seems quite the same. Im probably missing something really stupid. Or is this the way the bridge is supposed to behave? Do i need to use a routed virtual network?
[Code]....
I just intalled OpenSuse 11.2 on VmWare Server 2.0.2, the network is configured as Bridged and is sucefully configured a fixed IP in my network. Ok... The problem is... I can ping / trace all addresses from OpenSuse console. But I Can't wget all of them... It's a random thing. the same address that trace's ok, don't work for HTTP.
View 2 Replies View RelatedI have a normal user (sites:users) and the usual http user (wwwrun:www).I'm hosting several sites and I want to be able to upload stuff via ftp, so I'm using the "sites" home (/home/sites) to keep the sites I'm hosting. Giving read permissions to all inside /home/sites makes it accessible and readable to the wwwrun user. Problems come when I need to upload something. The easy way is to give 777 permissions to the folder that's going to receive the file, but I don't feel comfortable at all with that.
What do you recommend? Is there any group configuration that could help me (like adding "sites" to the "www" group)? Or any other configuration at all that might be according the the best practices?
I have just loaded Suse 11.4 and have had (2) problems, 1st: When I installed some additional programs, such as, Scribus, the system showed them as installed but they did not show up in the "applications" menu any where. I finally tracked them down and edited them in and they work fine - Why aren't they being automatically placed into the menu system? 2nd: I have a home network setup and all systems can see and work with each other, however, the host system is not shown as if it did not exist at all. for example; if I go to "network services" and select "Samba Shares" if other computers are connected it will show them but not the host - if no other computers are connected it shows nothing. On my 11.3 system it shows the host eg; "Linux-12fx blah blah" this is of course my host machine. I have replicated all of my settings on the 11.3 settings on my 11.4 system - no luck!
View 4 Replies View RelatedI am trying for the last many days to setup my opensuse 10.3 as Samba PDC Server according to the URL mentioned below, but in vain:How to setup SUSE 10.3 as Samba PDC - openSUSE When ever I try to join a Windows XP machine to the domain setup on Opensuse, I get the error:'The following error occured while attempting to join the domain. The network path was not found'. What could be the reason for this error despite of the fact the I am able to ping the FQDN of the PDC from the XP machine, but the XP machine simply denies to join the domain because of the above mentioned error.
View 7 Replies View RelatedI need to blacklist any incoming/outgoing connections to Google. I need to add filter something like this: *google*
View 5 Replies View RelatedI have an opensuse 11.3 install which I want to set up as a network boot server to install Solaris 10 on a Sun Ultra 10 client. According to what I've read, this requires rarpd and tftpd which I've set up on opensuse, but also bootparamd which I can't find for 11.3. It seems it was last included with opensuse 9.2. Does anyone know if it's available, if I could use the suse 9.2 version, or any alternative?
View 3 Replies View Relatedwhile trying to set up Xen Virtual Nodes we encountered one issue with the network (which is why it is posted here On the DomU the interface is provided by a bonding -bond0- of three NICS. Now the Xen network script a) does not take this bonding b) destroyes even this bonding From a number of posts I assume I have to configure this by hand, correct? Is there an instruction how to do this? Simply create a bridge on top of bond0??
View 1 Replies View RelatedEDIT: Thread name should be "No network on XEN guest ofcourse". I am trying to run OpenSUSE 11.3 as guest in OpenSUSE 11.2 as host. First problem I came across was libvirtd service wasnt started and after that I was able to install guest OS. Now there is a problem as guest doesnt have connection with internet.
Here is the script for the guest
name="opensuse113"
uuid="2f1f1d63-c416-a9c4-3bc1-4e92e248c5cc"
memory=512
maxmem=512
[code]....
Here are the images that show how it is all configured taken from Virutal Manager.
network1 png
tmpbridge png
host config png
The last image is from the guest config I just named it badly. Observe that xen is up and runing and there are no others issue this far.
OpenSUSE version: 11.2 *and* 10.0 I am unable to send email. It appears I am being blocked by my ISP [URL]... A Wireshark trace shows ICMP type 3 Code 13 - "Administratively filtered". It's important to note that I don't know exactly when the problem started, because I seldom use my ISP email account, I use Yahoo web mail due to the "throwaway" nature if I get hit with spam. I only discovered the problem when testing the functionality of 11.2. I suspect the problem started several months ago: I restored openSUSE 10.0 and the problem exists there too. I wish I'd sent that last email via 10.0 before the upgrade.
The weird thing is that using Windows 2000 box I can get a successful connection using telnet (Telnet also fails on the openSUSE box.) It appears to me there is something in the Linux TCP stack that Teksavvy doesn't like. I am on dial up and I pointed this out to Teksavvy tech support, as I am probably the only person left on dialup and the reason no one else has reported the problem
I can lookup DNS hostnames with dig and nslookup, but nothing else seems to be able to resolve anything. ping, telnet, Firefox, everything gets "unknown host".
For example:
> dig yahoo.com
; <<>> DiG 9.6.1-P2 <<>> yahoo.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 20438
;; flags: qr rd ra; QUERY: 1, ANSWER: 3, AUTHORITY: 13, ADDITIONAL: 0
;; QUESTION SECTION:
;yahoo.com.INA
;; ANSWER SECTION:
yahoo.com.17579INA209.131.36.159
yahoo.com.17579INA209.191.93.53
yahoo.com.17579INA69.147.114.224
;; AUTHORITY SECTION:
.10071INNSL.ROOT-SERVERS.NET.
.10071INNSI.ROOT-SERVERS.NET.
.10071INNSH.ROOT-SERVERS.NET.
.10071INNSF.ROOT-SERVERS.NET .....
> ping yahoo.com
ping: unknown host yahoo.com
> ping 209.131.36.159
PING 209.131.36.159 (209.131.36.159) 56(84) bytes of data.
64 bytes from 209.131.36.159: icmp_seq=1 ttl=55 time=97.2 ms
64 bytes from 209.131.36.159: icmp_seq=2 ttl=55 time=98.9 ms
I am running
Code:
On my laptop (HPDV7), using DHCP for network access, KDE4.
I use Network Manager to manage wired and wireless connectivity.
I also have Samba server running for connectivity to Windows machines.
My router runs DD-WRT.
How do I tell this HPDV7 system to propagate a Host Name up to the router?
In the DD-WRT status screen, I see Host Name as "*" associated with the assigned IP address.
I cannot, for example, ping my HPDV7 machine from my windows machine, I assume because the router (also providing DNS for my network) does not provide the name to address translation.
I CAN ping the IP address directly, and Samba connectivity from the Windows machine to HPDV7 works.
The file
Code:
I am running 11.2 and set ssh to boot at runlevel 3 and 5 through yast and started the service through the terminal. I have turned off the firewall on my wireless router and in the local firewall. When I try to connect from a machine in my office, I get the following
Code:
ssh: connect to host xx.xxx.xx.xxx port 22: Connection refused
When I run telnet from the machine, I get:
Code:
telnet: connect to address xx.xxx.xxx.xx: Connection refused
telnet: Unable to connect to remote host: Connection refused
netstat -tlnp on my machine shows:
Code:
tcp 0 0 :::22 :::* LISTEN 31622/sshd
I'd like to have a set up where my Ethernet card has a static IP set up but my WiFi card doesn't.Currently I have a profile for this set up in Network Manager, however on boot up and every time I replug the cable Network Manager chooses the default "auto eth1" profile. I manually have tochoose my own profile for the Ethernet card every time. How can I make it default??I know the workaround would be to use ifup but then I lose the ability to quickly change access points for my WiFi card so that's not a solution for me
View 9 Replies View RelatedI've just installed openSUSE 11.2, one problem is suse didn't find an internet connection when suse performed the ..."automatic system configuration. This routine attempts to configure your network and Internet access and sets up your hardware"... Where can I manually configure the network. I'm in the network folder now no luck. I've been using every documentation I could find Novell Documentation and DVD installation/11.2 - openSUSE Network Status: Unknown network status
View 9 Replies View RelatedI successfully added/shared a network printer in SUSE 11.3 32 bit, but when I try on the 64 Bit box it didn't work out very well.What ports need to be open ? Is it necessary to open port 631 in YAST->Firewall->Advance- >UDP and IPP ?(TCP 631 already open) What services need to be running? Here is the error log :
[16/Dec/2010:19:25:43 -0500] [cups-polld xxx.xxx.xxx.xxx:631] CUPS-Get-Printers failed: Forbidden
XXX is my server IP
I am trying to enable DHCP so that it will give out IP's to some XP boxes when they boot. I have had success doing it dynamically, but not statically using the host declaration.
host xpTest {
hardware ethernet 00:50:56:2A:3B:00;
fixed-address 192.168.100.2;
}
My question is, what should the subnet declaration be if I only want to hand out static IP's like this? Also, the host is the same name that is specified in /etc/hosts correct?
I'm running openSUSE 11.2 (Linux piura 2.6.31.12-0.2-desktop #1 SMP PREEMPT 2010-03-16 21:25:39 +0100 x86_64 x86_64 x86_64 GNU/Linux) and have a network problem. At work, ethernet works fine. When I plug it into my DSL router at home (which works with other computers), I encounter the following behavior: ping can resolve host names, however, traceroute and Firefox and Thunderbird cannot.
It happens for both wired and wireless connections.
I just installed (n this 11.2 system) vmware server (v 2.02), to have access to a few small systems. One of them is a 11.1 guest which I just upgraded to 11.3, successfully (almost).
I have a problem, though: from the host I can not ping/ssh the guest.
Guest to host works fine (including names).
Code:
The firewall is down on both sides. I don't see anything with iptraf in the guest. The IP addres of the guest is correct, unless I'm too tired to see.
Why?
Code:
I am unable to do my network setup. I have a lan connection. I used to easily setup it in windows xp in network connections > internet protocol > properties. But I do not understand anything in linux. I have installed latest version of open suse 11.1 and KDE environment. Secondly I am unable to play mp3 files on it and I do not hear any sound at startup too. I *945* motherboard with a inbuilt realtek lancard and it is working fine on windows.
View 3 Replies View RelatedThe internal network is behind nat done by the PC Router.The TP Link is recieving wireless signal from outdoors and it has switching and basic routing capabilities. I'm using the PC router for better routing options.PC Router (or R for short) is a triple-booting machine - Linux, FreeBSD and Windows. It has two lan cards - external (ext_if) - 100Mbps Realtek 8139 and internal (int_if) - 1Gbps integrated Realtek 8169.The problem is that all traffic from R to the network is slow - about 5-20K, while the traffic in the oppoiste direction is all right - about 10MB that is fine for 100Mbps cables, NICs and switches. The problem persist no matter the OS the pc R is running.I've tried some debugging on the situation as follows:
- put another PC at the place of R - everything is fine. That exclude the possibility of damaged cables, RJ-45s, switches and etc.
- connected both of the NICs to the Internet while the internal network is being disconnected and they both work fine (no delays)
- traffic shaping is not running
- there is nothing in firewalls except NATing the internal network (and it is working fine). Actually these firewall rules have been operational for more than months and everything was fine untill a week or two ago.
- changed the internal NIC with another
- connected the internal network directly to the TP and all of the PCs are getting good network performance. Then connected the R machine to the TP as well and there was good performance between the internal network PCs and R.
- R has good performance to the TP. In fact everything has good performance directly to the TP (when not connecting trough R).
- the problem persist only between R and machines from the internal network.
I tried to use systemtap but it complains about:
Code:
semantic error: missing x86_64 kernel/module debuginfo under '/lib/modules/2.6.34.7-0.7-desktop/build'...
[code]....
So I just recently built a desktop and the main purpose is directed toward gaming, etc. But I guess I haven't set-up my BIOS correctly, but when it comes to knowing what I'm doing in the BIOS it's nada. Anyways, I'm having mainly a timing and voltage issue, I start the PC up and it wants to start, shuts down and restarts successfully.
The hardware:
P55 EVGA SLI motherboard
Intel core i7-860 Lynnfield 2.8GHz 8MB L3 Cache LGA 1156 95w Quad-core
Visiontek 900301 Radeon HD 5750 1GB 128-bit GDDR 5 PCI express 2.0 x16
8GB 240-pin DDR3 SDRAM DDR3 1333
1TB Sata HDD
500W power supply
I have a load balancer with 2 web servers behind it. The web servers rsync with cloud storage to update their apache directories 1 time every hour. Apache is just running php pages that pull/push data to a DB so they dont need to be updated that often. However I need to figure out how to implement a Master/Master MySQL setup to have my web servers point to for the PHP stuff. I need to implement it without having a single point of failure. The Load balancers are useless for failover as they only detect availability based on Ping request. So putting a master/master setup behind a Load Balancer is out. what is the best way to setup the master/master mysql in a HA setup without the use of a load balancer provided by the host?
View 2 Replies View Relatedsetup the correct mode for my laptop-video card-monitor
Video card - ATI mobility Radeon X1600
External Monitor - Belinea b.display 2 22"
Right now the external monitor is working, but sometimes it goes black for 2-3 seconds and then works again. This happens sometimes 5 times in a row, sometimes once, sometimes none. Other issue, when I install any new kernel it doesn't work. I get weird picture on monitor.
i've just setup a vps server with 11.4 everything is almost look fine now, but i couldn't setup a nameserver, i've searched on the internet about that but directories is different in suse. anyway i registered a domain on onlinenic yesterday and i want to use this domain as a nameserver and my hostname. how can i do that ? and do i need to have at least 2 ip for that ?
View 7 Replies View RelatedI just installed Opensuse 11.2 today and I'm eager to start downloading and customizing, but I can't set up a network. I originally installed it with the GNOME desktop, and when I opened firefox i could only connect to [URL]... and [URL], other websites timed out, even if i got to them via search results or URL.
Now, I reinstalled using the KDE desktop because after a little thought I preferred it, but now I can't even connect to these search engines at all. I don't know how to configure the network! It's through the onboard ethernet port, ethernet cable direct to modem.