I have two ethernet cards eth0 and eth1:Where the internet is cable is conneted to eth0 I have another system i have connected a cable through eth1 to my second systems network cardnow i am able to access the internet on eth0 i.e.,on my first system ..ow can i share the internet which ius coming from eth0 to another system using eth1
View 4 Repliesshare internet connections with clients on the above os
View 2 Replies View RelatedI set up a samba file sharing system but my workgroup asks for a username and password see this-This is the text in /etc/samba/smb.conf:
# smb.conf is the main Samba configuration file. You find a full commented
# version at /usr/share/doc/packages/samba/examples/smb.conf.SUSE if the
# samba-doc package is installed.
[code]...
I used network manager to share internet connection coming to wlan0 with eth1.
I have internet in my PC coming to wlan0 and I want the client I hook to eth1 to have internet too.
It works with network manager but I think it added something I didn't ask for... Apparently the client connecting to eth1 is recieving an IP from a DHCP server outside the range of wlan0 IPs.
How can I configure eth1 to assign an IP that is inside my wlan0 LAN or at least give a static address to eth1 client that's inside my wlan0 LAN and internet keeps functionning.
I've got access to my LAN and the Internet via my wired ethernet connection. I'd like to share that access with my iPod Touch (device shouldn't really matter) via an Ad-hoc wi-fi network.
This tutorial in the docs seems to describe the right setup but is very out of date (7.04). Instead I found this tutorial and followed it to create the Ad-hoc wireless network. I was able to connect my touch to the resulting ad-hoc network without a problem, but I didn't have LAN/Internet access.What's the next step to get the clients on the ad-hoc network out to the Internet?I found this page in the docs that says I'd need to install dnsmasq-base and uninstalling dnsmasq. I checked and dnsmasq-base is already installed but dnsmasq is not. I do have dnsmasq in /usr/sbin but the package description makes it sound like this should come with dnsmasq. Is the page out of date? Will uninstalling dnsmasq cause other problems?
I have a wired lan at home with 2 XP boxes connecting to a router to a DSL modem. I want to network my laptop, running only fedora os, for file sharing, printing and internet access. I will be using the laptop probably exclusively for creating/maintaining a Drupal-based (LAMP) e-commerce site to replace our old one for our small family business.
View 4 Replies View RelatedI have a second network card in my ubuntu desktop that I have sharing my internet connection with a wireless router. I have set the router to a static ip address within the network cards range. But, every time I restart the computer, the network card uses a different ip address. One time it will be 10.42.43.1, the next time it will be 10.42.46.1, ect. This makes me have to hard reset my router every time it does this. How can I set the network card to use the same ip address all the time?
View 6 Replies View RelatedHow do I tell the shared connection that it has a static IP and that I dont want a DHCP on the network?Do I have to set up DHCP on the box with the shared connection, even if that box only runs DHCP for a single IP address being the eth0 that is shared?Or can I tell the shared connection that it has a static IP and still allow network manager to run the shared connection?Or should I specify static IP's for all clients and the shared network manager and install say firestarter on the gateway to run the NAT for the eth0 out to eth1.
View 3 Replies View RelatedI know that this is easy, but I am confused.I have three computers all with a clean install of SUSE 11.2. Two of them use wifi with the internet and the third is wired.I would like to share files between them all of them.When I go to dolphin/network there is nothing there and I don't know how to set it up.
View 1 Replies View RelatedI just installed suse on this computer, and am wanting to allow other computers to store files on it as a file server. I was reading the online manual and in the personal file preferences, it shows an option to enable 'share public files over network'. The problem is I don't see that option when I open up file preferences. All I see is an option to allow sharing using bluetooth, nothing about sharing over the network. When I look in the network I can see the computer running suse, but when I try to connect to it, it says 'unable to mount drive: connection refused by server.'
View 3 Replies View RelatedI have two Suse un-firewalled computers connected via NFS. About a year ago I found instructions for a very SIMPLE way to share a CUPS connected printer using Yast. When I installed 11.4 I lost the instructions. It required no config file editing and took about two minutes. Google searches focus on complicated SMB-Linux connections like those suggested by swerdna.
View 6 Replies View Relatedi'm running suse 11.2 and using a ZTE mf627. thus far i can connect to the internet using usb_switcher/vwdial but i want to share it across a LAN. all the how-to's on connection sharing I've seen use the network manager/network settings, but the device doesn't show up in either
View 2 Replies View RelatedWhat's the best program for filesharing? And could I share from opensuse to w7 starter?
View 4 Replies View RelatedI have an opensuse machine - 11.4, running KDE as my desktop. My wifes computer is a Windows 7 PC.
I have installed SAMBA and have configured it to load at each boot. I have set the domain name to WORKGROUP as this is domain name my wife has on her pc. I have shared the video folder within Dolphin in KDE. I'm uncertain about the meaning of the netbios setting (despite reading Chapter29.Samba) and whether I should adjust this setting. Basically, I'm able to see my wife's computer name within Linux, though within Windows, I'm unable to see my linux network. Is it due to the settings that I currently have on my linux pc. The documentation that I'm reading so far is confusing for me.
I want to know if you can make a share on Samba and if you access the file you need to put a username and password in and can you save that to the server. If you can give me a step by step guide how to do it or give me a link where I can go read up on it.
View 2 Replies View RelatedI have installed OpenSUSE 11.4 on my PC. Want to share my files with Win7 system. So far so good, I can access my files on Linux computer from my Windows PC. My problem starts when I want full access to my files, as you see on image it says directory is Public and Writable but still I can't delete or add files to that directory what did I missed ?
View 9 Replies View RelatedIs there an actual How-To or something like it about sharing data between linux system(s) and MS Windows XP?I do not think there is a golden path but maybe a list of possibilities and their pros and contras would be fine. As I understood there are different ways of sharing data (and so of setting the partitions)
1. Accessing the data of a MS Windows (NTFS) partition from a linux system (contra: possible data loss/data corruption?).
2. Accessing the data of a linux (ext3) partition form a Microsoft system (XP) (contra: possible data loss/data corruption?).
3. Sharing a data partition (FAT ?) (contra: problems with large files).
4. Visualization (contra1: If the main system gets broken, the guest is broken, too?; contra2: not so easy?; contra3: windows male ware in linux?).
I am thinking about reorganizing my hole system of sharing data and of partitions (including my NTFS partition for XP data and FAT partition for data shared with XP and linux).Now I am using mostly a FAT partition for sharing data but this seems to me not the way (for big files and especially because of data security).
I thought of making my /home partition bigger and use a windows program to get excess to ext3/ext4 from MS XP. I also thought of deleting my hole NTFS data partition and use only /home with document-folders etc. for each user / for the linux users and for the Mircosoft users. But this seems not so wise jet from I have read (at least not with an ext4 data partition):
[all variants] ext4 support on Windows XP - Ubuntu Forums
Ext2read - View ext2/3/4 partitions from Windows
I want to share files between my desktop box and my laptop either by my mains-LAN or by ethernet cable and cannot find anything on the forum to point me in the right direction. There is plenty of information to help with the installation of Apache/LAMP and the like. But is this what I need? Will I need to create logon IDs to the desktop to share files (and even the printer?).
View 9 Replies View RelatedHave followed swerdna's guide as in the past and my wife from her win7 computer can see and has read write access to all the shares & can print to the shared printer attached to the Opensuse computer etc. However, when I try to access her Win7 shares from my opensuse computer I am presented with a username / password prompt. Here is my smb.conf
[code]...
have followed swerdna's guide (as mentioned previously) and set 'password protected sharing' to off on the win7 computer.
OpenSuse 11.4 Asus Netbook 1000H Following other members in the forums I have installed Opensuse 11.4 on the Netbook. In the early days Ubuntu Netbook Remix worked well for me. But this has been discarded, and the "one size fits all" Ubuntu had become slow and cumbersome. So..... onto my post. Opensuse is working well. The install went beautifully.
It detected the Wireless Internet and I am able to get on line. I also need to share the Internet connection to a desktop. This is done via a small network switch. Thus far I cannot do this. I tried to use ifup to configure a static ip but this busted my Wireless configuration. I went back to knetwork manager. Then I tried to set up the wired network using knetwork manager and under IPV4 "share" the connection. But this blanks out any possiblity of a static address and substitutes dhcp. My desktop cannot ping the this dhcp address. Ubuntu had this thing called Firestarter? - from memory. This configured the system to sharing the network.
If I do System-Preferences-Personal File Sharing it tells me that I can't enable sharing over the network because "the required packages are not installed on your system". It doesn't tell me WHAT packages I need to install!
View 1 Replies View RelatedI'm trying to set up a wireless AP with Internet sharing. I currently have the AP setup with hostapd and a dhcp server. The clients can connect but there is not Internet sharing. Now my situation is somewhat uniqe in that my internet connection is my teathered android cell phone. The tether app is azilink and i use openvpn to create a virtual networking interface(tun0).
View 4 Replies View RelatedI installed Suse 11.2 on clean HD. I cannot connect to the internet. Seems like Suse didn't install drivers for on board ethernet card. It is a Marvell Yukon 88E8056. I'm new to this and don't know how to install the drivers.
View 3 Replies View RelatedI have SUSE 11.0 set up to act as a router/firewall for my home network to the internet through a cable modem attached to an Ethernet card. When I was laid off several years back, I found information that let me connect my network to an ISP via a standard serial modem. I am considering going to the Sprint U1901 4G USB modem and dropping cable internet. Sprint claims the U1901 is Linux compatible. My thoughts are that using the 4G modem should be similar to the old dialup modem. I had a script that connected to the internet whenever internet traffic was detected. Unfortunately, I did not save notes on what I had done to setup the modem to dial automatically, and I have been unable to locate information that seems good to set this up again. I already know that all I had to do to get routing working was simply replace the internet port in the firewall/routing script with the port for the modem. So I assume that is rather trivial.
Would you please point me to a doc, perhaps SuSE specific, that gives reasonable directions on how to set up a "dial on demand" ISP connection? I assume that the 4G modem will be very similar to my old serial modem so that a dial on demand script will work. I did find a dial on demand howto, however, it did not seem to apply.
In short: browsing the internet with domain names does not work. The long version: I've configured my network with DHCP and ifup. Ping works on my internal net and with servers in the internet. Dig work's too! I get the right IP to the requested domain. When i try to access the internet using firefox or even wget i get an DNS error. For example wget is showing the following error: Resolving heise.de... failed: Name or service not known. wget: unable to resolve host address 'heise.de'
Again dig show me the right IP and if i add the entry to /etc/hosts it work's too! I've even tried it with manually setup of ip address, nameserver and default gateway but with the same result. Switching off the firewall has no effect on this problem, too.
I install from openSUSE-11.3-NET-x86_64.iso. Installation was succesfull, but after install all packet on test internet / update was error. And after log in in installed system internet not work. I use router with DHCP
View 8 Replies View RelatedI'm on opensuse 11.4 (11.3 won't work with my monitor).
My computer gets internet through wireless and I want to share that internet through its ethernet port. So far I've tried using Knetworkmanager to create a network bridge between my wireless and wired connections. I created a new wired connection and shared it using the ip address settings. I was able to get both connections active, but the device hooked up via ethernet had no internet connectivity.
I also tried this command:
echo 1 > /proc/sys/net/ipv4/ip_forward
but another test resulted in the same fashion (no internet on wired). I believe anything I add to /proc should have an immediate effect, correct?
I have a desktop computer running OpenSUSE 11.2 with two network cards installed. I would like to use both cards for connecting to the internet using different networks. The setting would be the following: eth0 is the main (default) card, almost all programs should use this NIC for connecting to the internet. eth1 is used only by a few programs, which have setting for selecting which network interface to use. The two NIC's are connected to different networks, so the IP address of the NIC's, the related subnet masks and gateways are also different.
Saying short, I would like to have the two NIC's as they would be in two separate computers. I can set the IP address and subnet mask of the NIC's. The main problem is that I can only declare one gateway. How can i setup this? I do not use network manager, I configure network cards using yast, but if needed I can of course use ifconfig directly.
I'm having a strange problem with my network connection/DNS. I turn computer the on and it recognizes and connects to wireless or wired but I can't access any Internet resources or my router. If I ping the default gateway, I get no response and I get DNS errors from any network services that run at start up. If I stop and start the network daemon then it all works fine until the next time I turn on my laptop. It does this for both wireless and wired connection.
I've tried to edit the network interface information in YaST but it says that configuration is handled by knetworkmanager and I have no idea where that information is accessed. I should point out that it all worked fine until I tried to connect to open WAP at my school and couldn't so I connected to the wired network. Next morning I had this problem when connecting to my home network. My questions are 1. What could be the cause of this error and 2. where does one configure the network interfaces when using knetworkmanager
I often use an Ethernet cable to connect my computer to another computer for various purposes. But when I do that, I cannot use the internet even though I'm still connected to a WiFi access point. I'm presuming that's because openSUSE is trying to reach the internet through the Ethernet cable, which has precedence over WiFi.Is there a way to enable internet usage via WiFi while I'm connected to another computer over Ethernet?
View 9 Replies View Related