OpenSUSE Network :: Access To NX Server From Anywhere In World
Jan 5, 2010
I have run into a problem using FreeNX in combination with public key authentication. I have Googled myself silly, but I can't find the exact answer to my problem. I am hoping that someone here will know the answer. First, let me tell you what I am trying to accomplish:
- I don't want my ssh server exposed to the Internet with password logins enabled. I only want public key authentication.
- I want to have access to NX server from anywhere in the world.
- I want NX to use a custom keypair, not the default supplied by FreeNX.
My environment:
openSUSE 11.2 (client and server)
KDE 4.3.4 (client and server)
FreeNX-0.7.2-26.5.i586 (server)
openssh-5.2p1-9.1.i586 (client and server)
NX Client for Linux 3.4.0-5 from NoMachine (client)
qtNX Client qtnx-0.0.1SVNr281-215.1.i586 (client)
The login problem persists, whether I am connected to the same network or to another network. Since ssh logins work, I don't think a firewall is the culprit. What do I have working so far: - The ssh server on the remote host only accepts public key authentication and I can login from the client without problems. So far so good. - FreeNX is installed on the remote host, using a custom keypair.
Authentication with this key works. I can login from the client with the nx user and the public key.
[code]...
View 3 Replies
ADVERTISEMENT
Jul 29, 2009
I am having trouble getting my FC10 with tomcat visible to the outside world. first off i am somewhat new to linux. I am running vmware workstation to host my linux web server. i have my VMWare setup to use my second NIC solely. it is bridged and the tcp/ip is disable from the host. i can ping the ip address but cant access tomcat on port 8080 from the outside. i can hit it fine from inside fedora. i have configured my router (wrt54gs with DD-WRT firmware) for port forwarding. so basically i think that the problem is somewhere in between the host and the vmware configuring allowing the port to be forwarded through.
View 2 Replies
View Related
Mar 11, 2010
I can't seem to set this older server right to deny outside access while I build a website on it. What I am trying to accomplish is deny anyone outside of my network access to the website, but replace the 403 error with a temp page letting them know it is coming soon. I have googled for hours and everything I have tried just denies me as well. Seems to be all or nothing.
My last attempt was:
Code:
<VirtualHost *:80>
ServerName www.mydomain.com
ServerAlias mydomain.com
ServerAdmin me@mydomain.com
DocumentRoot /home/me/www/site
ErrorDocument 403 /temp.htm
<Directory />
Options FollowSymLinks -Indexes Multiviews
AllowOverride None
Order Deny,Allow
Allow from 192.168.0.*
Deny from all
</Directory>
</VirtualHost>
View 11 Replies
View Related
Aug 7, 2011
I am just trying to get SSH working between 2 local machines on OpensSuse 11.4 boxes. I have the SSHD daemon running, the firewall is configured to allow SSH to pass, and I am using SSH's password authentication. However, my machines cannot see each other. Anytime I try to SSH, I get "Could not resolve hostname<hostname>: Name or service not known."
Of course, that leads me to believe I need an entry in my /etc/hosts file. However, I use DHCP, and therefore have a dynamic IP address. Therefore, my hosts names will only be good until the next IP renewal. How in the world do I configure SSH with a DHCP assigned address?
View 4 Replies
View Related
Apr 6, 2010
I want to deny access to my server by PC's from other sub LAN on my company, so I will add the lines ALL: xxx.xx.xx. to hosts.allow and ALL: ALL to hosts.deny?
VampirD
Microsoft Windows is like air conditioning
Stops working when you open a window.
-----BEGIN PGP SIGNATURE-----
[Code].....
View 3 Replies
View Related
Jan 19, 2010
i work in an office with individual p/c's (all with windows xp) connected to a windows server. i have installed opensuse 11.2 on my work's p/c (as a dual boot) but have no idea what to do so that i can access files on the windows server. can some kind person point me in the right direction.
View 3 Replies
View Related
May 31, 2011
I have a server machine that is running SUSE Linux Enterprise Server 11. I set up a mysql server there. Now I want to access this mysql server from my laptop. I used the following command,
> mysql -h 12.246.5.70 -u davidehs -p
I found if the firewall on the server machine is running, I can not connect the mysql server from my laptop. If I stop the firewall first, and the do the connection, I can access the mysql. how to keep the firewall running and allow the remote mysql incoming requests?
View 4 Replies
View Related
Jan 28, 2011
I have a server machine that is running SUSE Linux Enterprise Server 11. I set up a mysql server there. Now I want to access this mysql server from my laptop. I used the following command,
> mysql -h 12.246.5.70 -u davidehs -p
I found if the firewall on the server machine is running, I can not connect the mysql server from my laptop. If I stop the firewall first, and the do the connection, I can access the mysql. Do you guys have any idea how to keep the firewall running and allow the remote mysql incoming requests?
View 11 Replies
View Related
May 23, 2010
How do you configure the firewall to allow external web access (it's a LAMP server) and internal access for samba shares ?
View 6 Replies
View Related
Sep 7, 2010
I'm trying to set my openSUSE desktop up to use the printers on my office network via Samba. I managed to get it working in 11.2 but 11.3 is giving me some trouble.I am able to access the printers and use them but I have to enter my network credentials each time I print. In 11.2 I was able to "save" my username/password and was not required to do this. Are there any Samba packages I need to add in addition to the basic ones? There seems to be a lack of documentation on this particular subject, most is concerning Windows clients printing on Linux print servers.
View 2 Replies
View Related
Aug 26, 2010
I installed 11.3amd64 as a VM under Vista/VMWare Player - all worked fine. I have now installed it as a physical system. It nstalled cleanly BUT during first boot it could not access the repos. With each repo it gave the message
- download (curl) error for (repo)
- error code connection failed
- error message could not resolve host (repo)
This was followed by a message box containing
- UI syntax error
- no widget with ID 'contents
Firefox could not access the internet (cannot find server) until I disabled IPV6 (I used about:config), now it works fine. I think the repos problem is because of IPV6 - I usually have trouble with IPV6. I tried disabling IPV6 with the following (How To Disable ipv6 on SuSE Linux | Linux Poison)
[code]......
View 8 Replies
View Related
Mar 16, 2010
I encountered a problem when I am trying to access my phpmyadmin the error came up: Wrong permissions on configuration file, should not be world writable!
View 6 Replies
View Related
May 15, 2010
I installed Fedora 12 from the Live CD and all is going well. Using most of the defaults, including Gnome.I can't see my WD MyBook World on the network. It came with software for Mac and Win, but for Linux, they just say contact your Linux Provider.
View 2 Replies
View Related
Mar 25, 2010
Installed a security update for samba tonight via Opensuse updater.Now, when trying to access my home network an authentication box pops up (never used to)Asks me to enter authentication for my home network.I enter my username and password and hit enter. After a few seconds the authentication box pops up again askingfor the same indicating I have entered the wrong username / password combination (which I know I have not).
View 9 Replies
View Related
Feb 9, 2010
I have a desktop computer running OpenSUSE 11.2 with two network cards installed. I would like to use both cards for connecting to the internet using different networks. The setting would be the following: eth0 is the main (default) card, almost all programs should use this NIC for connecting to the internet. eth1 is used only by a few programs, which have setting for selecting which network interface to use. The two NIC's are connected to different networks, so the IP address of the NIC's, the related subnet masks and gateways are also different.
Saying short, I would like to have the two NIC's as they would be in two separate computers. I can set the IP address and subnet mask of the NIC's. The main problem is that I can only declare one gateway. How can i setup this? I do not use network manager, I configure network cards using yast, but if needed I can of course use ifconfig directly.
View 9 Replies
View Related
Jul 30, 2010
I'm having a strange problem with my network connection/DNS. I turn computer the on and it recognizes and connects to wireless or wired but I can't access any Internet resources or my router. If I ping the default gateway, I get no response and I get DNS errors from any network services that run at start up. If I stop and start the network daemon then it all works fine until the next time I turn on my laptop. It does this for both wireless and wired connection.
I've tried to edit the network interface information in YaST but it says that configuration is handled by knetworkmanager and I have no idea where that information is accessed. I should point out that it all worked fine until I tried to connect to open WAP at my school and couldn't so I connected to the wired network. Next morning I had this problem when connecting to my home network. My questions are 1. What could be the cause of this error and 2. where does one configure the network interfaces when using knetworkmanager
View 4 Replies
View Related
Feb 22, 2011
i have 3 comps(running suse 11.3) and a laptop(running vista sp2). i have installed samba on all suse comps. i have a printer attached to one of the comps and it has been shared also the internet connection on that comp has been shared. all the computers are connected using lan cables through an ethernet switch. i also have a wireless router which is connected to the ethernet switch.
I am able to view all the comps on the network except the laptop running vista. all the desktops are visible on the network and are able to print and share files on the network and also connect to the internet. the laptop running vista can connect to the internet but its not visible on the network and nor can it share files across the network or access the printer.
View 1 Replies
View Related
Mar 30, 2011
So my World Book Network Drive stopped working all of a sudden and I decided to remove it from the enclosure and plug it in via USB. I can see it in Disk Utility, I took a snapshot of it and attached it here. Normally when I plug a hard disk into ubuntu you can see it in places, not the case with this one. I would like to try and retrieve the data from it?
View 1 Replies
View Related
Aug 20, 2010
New SUSE 11.3 install connects to network/internet etc OK with DHCP-assigned IP address. When I switch to static IP, I can no longer ping internal network, or anything else. This works OK with SUSE 11.2 on same hardware and (as far as I can see) same setup. Some diagnostics are shown below.
Firewall
Disabling the firewall makes no difference.
Not using a network manager (can't see how to assign fixed address if I do - all greyed out).
ifup eth0:
eth0 device: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext'
(not sure why the warning - eth0 is assigned to external in the firewall setup).
[code]....
View 9 Replies
View Related
Aug 7, 2010
I bought a WD My Book World Network Hard drive and are trying to connect it. I am using Suse 11.2 and have it connect wired through a Netgear WGR614 router.I believe I can use Samba?It is working under Windows and it connected as network drive.
View 2 Replies
View Related
Apr 20, 2011
I can't access any of the wired network settings and theres a red square with an X through it. Here are some snap shots. This is really funky.Is this red box with the X suppose to be here?
View 3 Replies
View Related
Jul 4, 2010
I have successfully installed "LAMP" and can get to my web server by typing 10.0.2.15. How can I make it so that when I type in my domain name it brings up my web server?
View 1 Replies
View Related
Sep 17, 2010
Got a few servers runnning and they all connect fine to the net. Each are running with a static IP provided by my ISP. But I have one server were I re-installed Debian Lenny - or tried to. At the stage were it wants to connect to a mirror it cannot due to network problems. I tried a new install leaving it behind a router. This solved the problem and it connected. Tried once more directly connected to a static IP and same problem happened - it got to the point with the mirror. Tried changing the settings after the installation through the router. This is what I get from ifconfig :
[Code]...
If I ping it from one of my other servers it shows as OK and can also ping my other servers from the server in question, but if I ping google.com it times out (fails). The IP 92.62.196.77 is in the range that I can use. Checked that with my ISP. Just to make sure I tried disconnecting one of the servers that I have working and changed the server in question settings and still it came out with the same problem.
View 6 Replies
View Related
May 10, 2010
My mail server stop receiving mail from the outside world. I need to ask you about the required logs, that I need to perform.
My systems is:
Code:
Linux Centos 5.4
Postfix
Courier-IMAP
View 1 Replies
View Related
Feb 12, 2010
coz my server blouked ip so i need to open to get all ips in world
View 4 Replies
View Related
May 7, 2010
i can't receive outside emails on a postfix server. i was able to get it to send emails with help in this thread. i can telnet into it via localhost, but not via domain name.
View 8 Replies
View Related
Jan 21, 2011
My website, IsleDiscount.com, is hosted on a virtual server with pair.com. Pair.com offers only one SFTP account on regular shared server and to set up mutltiple SFTP accounts, Pair.com moved me to a virtual server (VQS1), which I believe is not a shared server solution, but Pair representatives were able to create multiple SFTP accounts on this VQS server.
However, when I asked the representative to restrict access of this additional SFTP accounts to a sub-folder, I got the following warning email: confirm you understand this will make your entire web directory world-writeable. This will increase the chances of a security attack. If you do understand this, you can go ahead and execute the command yourself. The command below will accomplish both commands in one.
[Code]...
View 1 Replies
View Related
Apr 17, 2010
KDE world clock does not work I mean when I put it as widget it apper very small I can not see any thing on it and I can not open it to the desktop by double click as I use to do in KDE 3
View 1 Replies
View Related
Apr 10, 2009
I went away from home for a few days, ... Now I am back at home and noticed, that my server is going out with 100% available bandwidth. The server is mainly Http / Ftp / Mail server, so I stopped all services, to see which one it is. ervices stopped, still 100Mbps go out like ants in the flood.
I updated the system, made a backup, installed IPtraf. It seems that I have something 'installed' and my server is running something to attack User computers. It seems to try to find something on random IP's random ports. I am a little bit confused now. As long as my sites are running, I'm ~OK~ but sooner or later I would like to have my bandwidth back. How could I try to hunt down which service/app/process got hacked?
It seems that the monetary system of our society got now more enemy's than friends. Capitalism seems to reach it's end. But my server is serving also ART! Sooner or later we will need to pay copyright even for our thoughts. I was reading today, that the French president wants to punish file sharing as his wife made 3 albums, and wants to get some money ..
View 12 Replies
View Related
Feb 9, 2010
i built a new basic squid proxy server. so when i check my ip from internet various website. it shows my local ip address.
1) how to know squid proxy mode working in which mode, like tranparent rever or web proxy etc
2) how to hide all local ip from outside world, let our isp proxy global show everywhere by which traffic go out
View 1 Replies
View Related
