OpenSUSE Network :: Can't Access Network Settings?

Apr 20, 2011

I can't access any of the wired network settings and theres a red square with an X through it. Here are some snap shots. This is really funky.Is this red box with the X suppose to be here?

View 3 Replies


ADVERTISEMENT

OpenSUSE Network :: Two Network Cards With Different Settings For Internet Access

Feb 9, 2010

I have a desktop computer running OpenSUSE 11.2 with two network cards installed. I would like to use both cards for connecting to the internet using different networks. The setting would be the following: eth0 is the main (default) card, almost all programs should use this NIC for connecting to the internet. eth1 is used only by a few programs, which have setting for selecting which network interface to use. The two NIC's are connected to different networks, so the IP address of the NIC's, the related subnet masks and gateways are also different.

Saying short, I would like to have the two NIC's as they would be in two separate computers. I can set the IP address and subnet mask of the NIC's. The main problem is that I can only declare one gateway. How can i setup this? I do not use network manager, I configure network cards using yast, but if needed I can of course use ifconfig directly.

View 9 Replies View Related

OpenSUSE Network :: No Network Connection After Firwall Settings Changed / Get It To Work?

Nov 17, 2010

I deleted the firewall files "K09SuSEfirewall2_init", "K01SuSEfirewall2_setup", "S11SuSEfirewall2_setup" and "S01SuSEfirewall2_init" from "/etc/rc.d/rc5.d" in order to disable the firewall when rebooting.

As a consequence all network services are not working. I can't connect to any other machine nor to the internet.

I rebuilt the symbolic files based on the ones for runlevel 3, but still no network services are available.

Any suggestions how to make it work again? I'm using Suse 11.3.

View 9 Replies View Related

OpenSUSE Network :: Unable To Ping The Default Gateway When Using Custom Settings - Unreachable Network

Jul 17, 2011

I installed openSUSE on one of my work system. The network port wasn't working when I was installing, but works fine now (checked in Windows). But for some reason, I am not able to configure the network. I used both Dynamic and Static IPs (both work fine in Windows) but still no go. I am using Yast Control Center for this purpose. I can't even ping the default gateway when I am using custom settings. When I use dynamic settings, it says Unreachable Network.

View 7 Replies View Related

OpenSUSE Network :: Can't Get An IP Address Yast2 And Network Settings Displays?

Jan 31, 2010

I've updated a desktop from 11.1 to 11.2 with the NET CD. After completion everything worked fine, though I have some issues with the NIC. been looking on the net and the provided solutions haven't been able to resolve the matter. After reboot I don't get an IP address, I go into Yast2 and network settings displays:

I have to delete the unknown device everytime after a reboot in order to get a new IP address. After that all works as it is suppsed to. I've been looking into the /etc/udev/rules.d/70-persistent-net.rules and deleted all that was in there,

View 6 Replies View Related

OpenSUSE Network :: Samba Security Update / Lost Access To Network

Mar 25, 2010

Installed a security update for samba tonight via Opensuse updater.Now, when trying to access my home network an authentication box pops up (never used to)Asks me to enter authentication for my home network.I enter my username and password and hit enter. After a few seconds the authentication box pops up again askingfor the same indicating I have entered the wrong username / password combination (which I know I have not).

View 9 Replies View Related

OpenSUSE Network :: Network / DNS - Can't Access Any Internet Resources Or Router

Jul 30, 2010

I'm having a strange problem with my network connection/DNS. I turn computer the on and it recognizes and connects to wireless or wired but I can't access any Internet resources or my router. If I ping the default gateway, I get no response and I get DNS errors from any network services that run at start up. If I stop and start the network daemon then it all works fine until the next time I turn on my laptop. It does this for both wireless and wired connection.

I've tried to edit the network interface information in YaST but it says that configuration is handled by knetworkmanager and I have no idea where that information is accessed. I should point out that it all worked fine until I tried to connect to open WAP at my school and couldn't so I connected to the wired network. Next morning I had this problem when connecting to my home network. My questions are 1. What could be the cause of this error and 2. where does one configure the network interfaces when using knetworkmanager

View 4 Replies View Related

OpenSUSE Network :: Share Files Across The Network Or Access The Printer?

Feb 22, 2011

i have 3 comps(running suse 11.3) and a laptop(running vista sp2). i have installed samba on all suse comps. i have a printer attached to one of the comps and it has been shared also the internet connection on that comp has been shared. all the computers are connected using lan cables through an ethernet switch. i also have a wireless router which is connected to the ethernet switch.

I am able to view all the comps on the network except the laptop running vista. all the desktops are visible on the network and are able to print and share files on the network and also connect to the internet. the laptop running vista can connect to the internet but its not visible on the network and nor can it share files across the network or access the printer.

View 1 Replies View Related

OpenSUSE Network :: SUSE 11.3 No Network Access With Static IP

Aug 20, 2010

New SUSE 11.3 install connects to network/internet etc OK with DHCP-assigned IP address. When I switch to static IP, I can no longer ping internal network, or anything else. This works OK with SUSE 11.2 on same hardware and (as far as I can see) same setup. Some diagnostics are shown below.

Firewall
Disabling the firewall makes no difference.

Not using a network manager (can't see how to assign fixed address if I do - all greyed out).

ifup eth0:
eth0 device: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext'
(not sure why the warning - eth0 is assigned to external in the firewall setup).

[code]....

View 9 Replies View Related

OpenSUSE Network :: Want To Change DNS Settings

Feb 26, 2010

I want to change DNS settings. How do I make it from yast?

View 1 Replies View Related

OpenSUSE Network :: Manually Changing DNS Settings?

Jan 8, 2011

once upon a time i manually entered my ISP's DNS servers in /etc/resolv.conf Now i have changed ISP, my old DNS setting are still present even though i have edited my resolv.conf file to my new ISP's DNS servers. Internet still works fine, i just want to use my new ISP's DNS as my old ISP will be closing its doors very soon. Am i doing something wrong, or better put.forgot to edit another file..? I did do this a while ago, so i apologise in advance for my incompetence. I'm stilling running 11.1 / Router has DHCP configured. my resolv.conf file is below

Code:
cat /etc/resolv.conf
### /etc/resolv.conf file autogenerated by netconfig!
#
# Before you change this file manually, consider to define the
# static DNS configuration using the following variables in the
# /etc/sysconfig/network/config file:
# NETCONFIG_DNS_STATIC_SEARCHLIST

[Code]...

View 9 Replies View Related

OpenSUSE Network :: 11.4 Subversion Proxy Settings ?

Sep 16, 2011

I installed openSuse 11.4 (KDE). It was excellent - everything was working great except for Subversion which use to work fine on 11.3 (command line is broken on 11.4, Eclipse/Subclipse works fine on both).

Subversion kept going to the proxy server instead of going directly to our internal Subversion server. I tried (1.) setting the proxy settings in Yast with excluding for our Subversion server, (2.) tried adding the usual settings in ~/.subversion/servers (which worked fine in 11.3). I could not check out on the command line from the local server, I can check out from external servers, eg: Google.

(I installed from the live CD download. I think this is using something some plasma widget thing for the network management.) Why is Subversion not using the usual ~/.subversion/servers file for its settings in 11.4 (KDE)? What is it using and how can I make it not use the proxy server? (Someone else mentioned his Subversion only started working after he used some Chrome plug-in to change the proxy settings but had no idea why?)

View 1 Replies View Related

OpenSUSE Network :: 11.3 Amd64 - Having Internet Access But Cannot Access Repos - IPV6?

Aug 26, 2010

I installed 11.3amd64 as a VM under Vista/VMWare Player - all worked fine. I have now installed it as a physical system. It nstalled cleanly BUT during first boot it could not access the repos. With each repo it gave the message

- download (curl) error for (repo)
- error code connection failed
- error message could not resolve host (repo)

This was followed by a message box containing

- UI syntax error
- no widget with ID 'contents

Firefox could not access the internet (cannot find server) until I disabled IPV6 (I used about:config), now it works fine. I think the repos problem is because of IPV6 - I usually have trouble with IPV6. I tried disabling IPV6 with the following (How To Disable ipv6 on SuSE Linux | Linux Poison)

[code]......

View 8 Replies View Related

OpenSUSE Network :: Cannot Write PAM Settings (abug Or Configuration)?

Feb 13, 2010

I'm using openSUSE 11.2 (GNOME), When I go to yast and if I try configuring Fingerprint Reader or Windows domain membership I get the following error

Code:
Cannot write PAM settings
I want to understand whether its a bug or something related to configuration. When I

[code]...

View 2 Replies View Related

OpenSUSE Network :: Configure Proxy Settings For Browsers?

Aug 28, 2010

If I configure my OpenSuSE 11.2 system to use a proxy server in the YaST Proxy module, do I still need to configure my browser (i.e Firefox) to use these proxy settings, or is it done automatically under the covers?

View 1 Replies View Related

OpenSUSE Network :: Cannot Connect With Skype - Don't Change Settings?

Dec 22, 2010

If you cannot connect with Skype, don't change your settings. The problem comes from Skype. Google for Skype outage.

View 4 Replies View Related

OpenSUSE Network :: Firewall Settings - Configure - Interface Isn't Assigned To Any Zone?

Apr 20, 2010

I have a work desktop plugged into the work network. As I opened my firewall settings I noticed that it is turned off. My question is how should I configure it? I saw that the interface isn't assigned to any zone... I should assign to internal zone and open some port that I need in order to work? There are some guidelines for configuring the firewall?

View 2 Replies View Related

OpenSUSE Network :: DNS Settings And The Internet Connected, But Without The .exe Program It Just Disconnects After 10 Minutes?

Sep 13, 2010

i just installed open suse 11.3 after using linux mint 7(based on ubuntu 9.04).i am currently using two internet connections at home, the first is a vodafone mobile modem, which is workind excellent, and the other is a LAN network, that on windows uses a *.exe program to run. i managed to make all the IP, NETMASK, DNS settings and the internet connected, but without the .exe program it just disconnects after 10 minutes.this is the same thing that happens with the connections on windows if i start the computer and not run the "net.exe" program, but if that program is running the internet connections works just fine. i tried using wine to run net.exe, but it just gives an error message.

View 5 Replies View Related

OpenSUSE Wireless :: Network Settings And Usb-wlan-card Didn't Work

May 8, 2010

i installed suse (KDE) on my old notebook and now I'm trying to get the wlan to connect to our router and can't figure out how to get it to work. My card seems to work, the network manager even finds the router, but i just cant get a connection. I followed the steps of the "Getting Your Wireless to Work" thread and these are the results:

[Code]....

- i messed around a bit with the network settings and might have cluelessly broken something (or broken it more)

- i tried a usb-wlan-card as an alternative, which didn't work either, but could possibly have messed things up even more.

View 7 Replies View Related

Networking :: OpenSuSE / Yast / Network Settings: Gateway Eth0 Through Wlan1?

Dec 16, 2010

I have a laptop running OpenSuSE 11.2. I use the Yast menu to set up network settings via "traditional" ifconfig setup (not NetworkManager), because I found NM unusable in prior releases when doing network gymnastics such as router re-flashing, LAN reconfiguration, etc. where I needed control of the IP address, netmask, DHCP, tftp, etc. My laptop works fine with Yast "traditional" ifconfig configuration for eth0 connected to router to Internet. Works fine with Yast ifconfig configuration for USB WiFi as wlan1 to WiFi router to Internet. Also works fine for virtual machines on vmnets NAT-ed to the Internet. Works fine as long as there is only one network connection, that is.

Now, I have a second laptop. I want to network laptop #2 eth0 to laptop #1 eth0 for file transfer and/or Internet access WHILE laptop #1 is is linked to the Internet through wlan1. Unfortunately, I have not figured out how to get Yast/Network Configuration to do that. I have not been able to get Yast/Network Configuration to see both wlan1 and eth0 at the same time--when the Yast utility finishes, I do >ifconfig and >route, and I find that I have lost either eth0 or wlan1. Thus, when I do direct-connect file transfers, I loose the WiFi Internet connection on both machines.

I suspect that it might have something to do with Yast/Network Configuration utility not being able to handle two network interfaces on the host with different IP addresses. how to properly put an OpenSuSE machine on two networks simultaneously? And then how to turn on IP forwarding so that I can use laptop #1's WiFi as an Internet gateway for laptop #2?

View 1 Replies View Related

General :: Networking - Network Card - Connected To Network - Given Access Point - No Connection?

Apr 3, 2010

I installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?

View 2 Replies View Related

Ubuntu Servers :: Two Network Cards / Can't Access Internal Network

Feb 25, 2011

I've installed Ubuntu Server 10.10 with two network cards. One for external, and one internal.My problem is that as soon as i activate eth1 (external), i can't access the server from the internal network (eth0)

With these settings i can't reach the internal network from inside.If i disable the gateway on eth1 and enable the gateway on eth0, it works.

View 6 Replies View Related

OpenSUSE Network :: Can't Find Network Hard Driver On Network?

Oct 31, 2010

On Linux Mint (Gnome) i used to go to Network drive. that is on the right hand side of Nautilus there is a short cut for Network. in there i could see my network hard drive and other laptops connected to the network, and i could access my files. but on OpenSuse, when i open the network folder, nothing comes up. may be it needs some sort of configuration.

View 2 Replies View Related

OpenSUSE Network :: Use Ssh Key To Access The PC?

Jun 12, 2010

I halted my PC with the command ssh PC "su - -c halt", I use ssh key to access the PC so it ask for the root password, but echo it on the shell

[vampird@Sharwyn]:~$ ssh shinobu "su - -c halt"
Password: ROOTPASSWD
[vampird@Sharwyn]:~$
- --
VampirD

[Code].....

View 3 Replies View Related

OpenSUSE Network :: OS 11.2: Cannot Now Access Internet

Feb 4, 2010

Is there a network trouble shooting guide for OS 11.2 that I could follow? I've shot myself in the foot so I should try to fix it.

I changed the DNS server addresses and the number of IP addresses on my router. I then set my Linux system to use static IP addressing and edited the network settings for my network adapter accordingly. I can now no longer get to any web-site.

By contrast, I also updated 1 of my Windows computers in a similar way; it continues to work without problem.

View 4 Replies View Related

OpenSUSE Network :: No Interenet Access 11.2?

Feb 17, 2010

I am trying to get internet connection on Open Suse 11.2 through my wireless connection. I can connect to my network but there is no internet connection. The internet connection does work with other Linux distros and with Windows 7 laptop and Windows XP machines. I tried turning off the firewall but still no connection. What is even stranger is I can ping Google but in Firefox I cannot go to Google.

View 9 Replies View Related

OpenSUSE Network :: No Internet Access 11.2

Feb 17, 2010

I am trying to get internet connection on Open Suse 11.2 through my wireless connection. I can connect to my network but there is no internet connection. The internet connection does work with other Linux distros and with Windows 7 laptop and Windows XP machines. I tried turning off the firewall but still no connection. What is even stranger is I can ping Google but in Firefox I cannot go to Google.

View 1 Replies View Related

OpenSUSE Network :: Cannot Access A Smb Share By Name

Apr 27, 2010

I have some problems accessing a smb share by name. Few day ago I was able to access the share by name but seems that today I cannot access anymore. I tried to restart the computer .. but nothing happened. Notice that the dns server is responding and is working correctly.

How can I debug this problem. It's annoying because I don't know all the IP addresses of our internal servers.

View 9 Replies View Related

OpenSUSE Network :: Can't Get Internet Access?

Dec 4, 2010

I'm kinda new to this, and usually i get help from a computor technician at school. BUT sins its Saturday, i cant get any help, and i realy need it. Well my problem is that i cant get any internet access using eth0 at my computer. I dont know what i have done wrong, if i have done anything wrong, it just reinstalled. ANd i dont know how to config it.

View 3 Replies View Related

OpenSUSE Network :: Installed 11.3 32-bit And Cannot Access The Web?

Dec 12, 2010

I am reasonably literate, but grew up with DOS and Windows. I tried ubuntu before and found it ok but never persevered.

I have just installed 11.3 32-bit and I cannot access the web. I first tried using a usb wireless (Belkin F5D7050 - Ver. 3) it seems to be recognised and functioning but no web access. I can ping that's all. Can't access internet repositories either.

I then tried a wired connection. Again it seems to be recognised and I can ping successfully but no web access or repositories.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved