OpenSUSE Network :: Wvdial Error - No Carrier Trying Again
Nov 23, 2010
I am trying to use a ZTE AC2726 USB EVDO Modem on openSuSE Linux 11.3 to connect to the internet.
I have edited the /etc/wvdial.conf file as follows
[Dialer Defaults]
Modem = /dev/ttyUSB0
Baud = 460800
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2
Init3 =
Area Code =
Phone = # 777
Username =card
Password =mypassword
Ask Password = 0
Dial Command = ATDT
Stupid Mode = 1
Compuserve = 0
Force Address =
Idle Seconds = 300
DialMessage1 =
DialMessage2 =
ISDN = 0
Auto DNS = 1
When I execute the wvdial command on the terminal the following error appears:
joey-suse:~/Desktop # wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2
ATQ0 V1 E1 S0=0 &C1 &D2
OK
--> Modem initialized.
--> Idle Seconds = 300, disabling automatic reconnect.
--> Sending: ATDT# 777
--> Waiting for carrier.
ATDT# 777
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT# 777
--> Waiting for carrier.
ATDT# 777
NO CARRIER
--> No Carrier! Trying again.
View 1 Replies
ADVERTISEMENT
Dec 17, 2010
I installed the intel soft modem in the debian lenny, and system can detect the modem, wvdial can dial the phone number but cannot connect to the internet with this error:
No Carrier
The phone number, user and password all are correct and I can connect to the internet in the windows as I post this post in the windows.
View 1 Replies
View Related
Jul 17, 2011
I have a usb modem(A phone): Huawei Technologies Co., Ltd. E220 HSDPA Modem / E230/E270 HSDPA/HSUPA Modem It is recognized by Yast under modems.But I am getting No carrier detected on wvdial,qinternet and many I have tried with. Here is the output:
[Code]....
View 3 Replies
View Related
Dec 23, 2010
I am using wvdial to connect to a mobile network (I have a usb modem) and it works fine. However, I wanted to automate the connection a bit (currently I am running wvdial every time I want to connect). I was wandering if there is a way to add this network to /etc/network/interfaces (in a truly Debian way) to have it connect on startup and/or whenever I connect my modem.
View 1 Replies
View Related
Jul 29, 2011
Wvdial give me this error
PHP Code:
--> WvDial: Internet dialer version 1.60--> Warning:
section [Dialer Defaults] does not exist in wvdial.conf.
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
View 1 Replies
View Related
Jul 27, 2011
I am facing two issues with CUPS - 1. I have installed cups 1.3.9 over OpenSuse11 x86. Please check below -
cups:/usr/share/cups/banners # cups-config --version
1.3.9
cups:/usr/share/cups/banners # cat /proc/version
Linux version 2.6.27.7-9-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-12-04 18:10:04 +0100
I have added few printers over there and everything is working fine. I can also able to add - delete - modify any printers from "yast2 printer" command. I can also able to browse cups web interface via http://cups:631, but when I am going to manage the printers (start - stop - delete etc), none of the buttons are working in firefox5 not even in IE also. Older version of firefox is giving error as "This address uses a network port which is normally used for purposes other than Web browsing. Firefox has canceled the request for your protection." All other buttons are working properly.
2. LINUX - LINUX Printing - OK
LINUX - WINDOWS Printing - OK
WINDOWS - LINUX Printing - NOT OK
While giving printing from Windows machine (Printer attached on Linux), there is no problem to coonect the printers, but unable to print.
View 3 Replies
View Related
Jan 5, 2011
I install from openSUSE-11.3-NET-x86_64.iso. Installation was succesfull, but after install all packet on test internet / update was error. And after log in in installed system internet not work. I use router with DHCP
View 8 Replies
View Related
Mar 21, 2011
I'm working with OpenSusse 11.2. I installed and activated the NFS server via yast2. I exported the relevant directory via yast2 (NFS server configurastion)
I'm trying to setup my Linux target to boot via NFS. The kernel boots up but fails to mount the file system. When looking on a capture from ethereal it can be found that the NFS server return error when client try to mount the /nfstest directory from this server. The returned error is 13
serverip: 192.168.56.130
targetip: 192.168.20.180
gateway: 192.168.20.101
[Code].....
View 1 Replies
View Related
Feb 11, 2010
I 've tried many ways to configure my Reliance NetConnect with Ubuntu. I 've tried with wvdial, sudo pon, tried through Network Manager, and using wine I installed the .exe driver.
I liked Ubuntu, but I need to configure usb modem..
I 'm using Huawei EC325, Reliance NetConnect USB modem..
When I try using wvdial, I can see some operations performing, its dialing #777, but some prob with the carrier..
View 1 Replies
View Related
Feb 8, 2011
I am planning to switch my carrier to Unix, where & how do I start?
View 3 Replies
View Related
Jun 23, 2011
I 've problem with this usb stick to connect to Internet. I desperately tried for 6 long hours but could not resolve it! I almost tried every possible / meaningful solution but none worked! My system detects the modem but it says NO CARRIER !
Code:
chinmaya@chinmaya:~$ sudo wvdial
--> WvDial: Internet dialer version 1.61
--> Initializing modem.
--> Sending: ATZ
[Code]...
View 9 Replies
View Related
Mar 20, 2010
Installed gapcmon 3.14.6 on openSUSE 11.2 using YAST. Have a Back-UPS XS 1500 (model BX1500LCD) connected via USB cable. gapcmon cannot communicate with UPS. Get NIS network error. Had same problem previously and was able to get it working, but can't remember what I did to get it to work. I have included technical details from a hardware scan showing that the connection between my system and USP is working as well as the contents of apcupsd.conf and screenshots.
View 9 Replies
View Related
Jan 14, 2010
Trying to add some rules to fail2ban list for bind dns. How to enable logging in /etc/named.conf file, that errors will show in /var/log directoy?
View 1 Replies
View Related
Jan 18, 2010
I just noticed the following error after booting my system.
Code:
I cannot find any reference on this on the forum or else on the internet. Is this a major problem or just a notification that can be ingnored.
View 4 Replies
View Related
Aug 9, 2010
I have opensuse 11.3 . i tried to install xampp but i have problems. when i try to extract the downloaded archive file to /opt with the command line:
I have an error message :
Then when i want to start xampp server with:
It didn't work because the file lampp does not exists in /opt/lampp
The command line ls /opt/lampp/ gives
View 2 Replies
View Related
Dec 23, 2010
I recently encountered an error with pppd on both openSUSE 11.2 and 11.3. I use umtsmon (which uses pppd) to connect to the internet with my 3G device. Yesterday for some reason it just plainly refused to connect to the internet. I have been using the same configuration for almost a year now without any issues. I tried it on 4 different computers running 11.2 and 11.3 and all of them failed. Thinking that it is the hardware I borrowed a windows laptop and tested it on that, only to find that it works flawlessly. On my network server I sometimes use the device as a backup and activate it with "ifup modem0", for some reason this also now fails.
After doing some troubleshooting I managed to extract the following from pppd.
Running it with my user account:
pppd options in effect:
I have no idea why pppd would break all of a sudden but I expect it might have been an update that broke it since I have automated updates on all of my systems.
View 1 Replies
View Related
Aug 23, 2011
I mount the share on my Windows server with following command:
Code:
mount -t cifs -o username=Administrator,password='mypassword',rw,dir_mode=0777,file_mode=0777,nobrl,uid=1000,gid=100 //10.8.0.1/users /mnt/
In my 11.3 computer it works well. I opening, copying files like I do in local filesystem. At the same time it's not working well on my 11.4 computer: the share mounts without errors, I see all files, can copy them from server to local computer. But when I'm trying to make copies to server, sometimes I receive messages like "Error writing file ...". Not always, but in the most part of my attempts. find the part of my /var/log/messages file:
Code:
Aug 23 17:35:55 linux-393i kernel: [ 3522.419904] CIFS VFS: Unexpected SMB signature
I use following kernel: 2.6.37.6-0.7-desktop
View 9 Replies
View Related
Nov 14, 2009
I'm extremely new to SuSE Linux. I wanted to move away from Windows and so I decided to reload my Desktop with SuSE linux.I have had no trouble until now. I'm trying to connect to my work VPN connection. From my laptop (which unfortunately is Vista) I'm able to connect without any issues. However, when I tried out the KVPN application on my SuSE linux, it just doesn't work. I get the error:
Authentification has failed.
As a side note, when I type ping google, the packets are received 100% but when I ping my company address, no packets are received. Hope this info is useful.
View 9 Replies
View Related
Dec 19, 2009
I just installed a fresh copy of 11.2 I use networkmanager and the cisco vpn plugin (not the cisco client). I create a vpn profile and connect to it. The icon shows a connection has been established, but I have no network connectivity. In the /var/log/NetworkManager file, I see this
Code:
Dec 19 13:28:08 TonyLaptop nm-dispatcher.action: Script '/etc/NetworkManager/dispatcher.d/netcontrol_services' exited with error status 127.
When I sudo vpnc and connect that way, it works fine, it connects and I can pass traffic.
I am using opensuse 11.2x86
firewall is disabled
Gnome
View 3 Replies
View Related
Jan 19, 2010
I set up the 'Proxy' from Yast and they tested successfully. I can connect to internet, but why am I getting 'ERROR 407 proxy authentication required'?
FYI, my comp is the part of company .NET network with bunch of firewall and security...
View 4 Replies
View Related
Jun 19, 2010
(I'm probably going to have my forum account revoked due to excessive usage ) I'm setting a VPN connection on openSUSE 11.2. Using the networking icon on the tray I add a PPTP connection, set it up but I receive a message 'VPN connection failed'. Googling it up I tried changing a setting called 'refuse-eap' to 'yes' but it doesn't seem to work. Here's the result from the log file:
[code]...
View 1 Replies
View Related
Jul 2, 2010
tail -f /var/log/xrdp-sesman.log
[20100702-09:58:47] [INFO ] shutting down sesman 1
[20100702-09:58:54] [WARN ] [init:45] libscp initialized
[20100702-09:58:54] [CORE ] starting sesman with pid 7000
[code]....
View 4 Replies
View Related
Oct 5, 2010
I recently donwloaded boinc and every time I launch I get this error "cannot connect to core client." I went through the guides and opened port 31416 in external zone, am I doing this right? The guide said to put it in the DMZ, what's the difference?
View 3 Replies
View Related
Nov 1, 2010
I'm having a little problem here. That, or I'm missing the obvious staring me in the face. I have this file server, called toad. I nuked it's system disk, reorganising the partitions and upgrading to openSUSE 11.3 x64. I installed vsftd with "Yast FTP server", and the config looks OK. I even compared it with that of another machine. But when I try to connect, this is what I get:
user@mainmachine:~> ftp
ftp> open toad
Connected to toad.geuens.org.
500 OOPS: could not bind listening IPv6 socket
I'm prettige sure IPv6 is deactivated. The firewall is disabled on both machines. I've looked this over again and again. Can't find it. It's not the connecting machine, I've tried from another.
View 4 Replies
View Related
Mar 15, 2011
I am getting the error Cannot Enable Service SUSEFirewall2_setup when I try to set up the firewall in Yast.
11.4 x86-64
KDE 4.6.00
View 1 Replies
View Related
Dec 23, 2010
When we try to login using KDE we get the following error
"kstartupconfig4 does not exist or fails. The error code is 3. Check"
If we use IceWM GUI login works fine.
View 1 Replies
View Related
Nov 24, 2008
I have a problem with the NTLM proxy we use in school. YAST proxy configuration won't work, it just says authentication error. We have to login with the user in DOMAINuser style and a password, in Firefox it works.
View 6 Replies
View Related
Jan 26, 2010
We recently moved to a new home and I am trying to get my home file/print server set up again. Thanks to swerdna's excellent website, I got my server box (just upgraded from 11.0 to 11.2) running Samba and serving my shares over the network, and my "client" machines can access them without a problem.However, I'm not having much luck setting up CIFS mounts on my Linux desktop. I have my all-purpose user added to the Samba auth list (via smbpasswd), and configured my client as swerdna's howto's specify, and I can access the files just find. However, when I try to mount the shares with this command:
Code:
mount -t cifs -o username=klein,password=klein //192.168.1.70/sharedmedia /home/zak/SharedMedia/
I get the following error:
[code].....
View 2 Replies
View Related
May 4, 2010
Anyone know what this signifies in the Apache logs files:
Code:
[Tue May 04 20:56:06 2010] [error] [client *******] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 20:56:06 2010] [error] [client *********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 21:05:18 2010] [error] [client ********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 21:05:18 2010] [error] [client ********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
View 2 Replies
View Related
May 14, 2010
i am getting the following error at maillog while i try to enable emailing on Zabbix server
tail /var/log/maillog
May 14 10:03:19 localhost sendmail[21522]: o4H63J8U021522: monitor-xxxxx.com [127.0.0.1] did not issue MAIL/EXPN/VRFY/ETRN during connection to MTA
the above message is repeated continously!
View 1 Replies
View Related
