I just noticed the following error after booting my system.
Code:
I cannot find any reference on this on the forum or else on the internet. Is this a major problem or just a notification that can be ingnored.
My home computer has 11.3 and SuSEfirewall enabled. It connects to the net over the wireless and SuSEfirewall has this connection in the external zone.
I can successfully ssh into this computer from remote (the work computer) but none of the ssh port-forwarded connections work. I'm trying to tunnel VNC over ssh. I also tried setting http on the home computer to serve pages on a high-numbered port (8090) and tunnelling that but it also didn't work - proving that it's not a VNC problem.
Here are the relevant messages from the firewall logs on the home machine:
Code:
I don't understand why this isn't working now, I had the same setup on 11.2 and it worked fine.
The 95.91.92.92 is the public IP address of my home router, I don't understand why a connection would appear to be coming from there when I use ssh-tunnelling?
I have a remote network that I manage consisting of a DLink DFL-210 firewall/router, and behind that a Dell server running openSUSE 11.2 and a collection of Windows XP/Vista/7 computers.
The Linux box is running OpenVPN as a server (that is how I connect to this network) and a client (it connects to a second server - running XP - at a different location).
The DLink router is the DHCP server and provides addresses on the 192.168.51.0/24 network. The OpenVPN server provides the 10.8.51.0/24 address range.
The remote network that the Linux box connects to is 192.168.54.0/24 via the OpenVPN network 10.8.54.0/24.
I have added routes to the DLink router to route all traffic to the 10.8.51.0/24 and 192.168.54.0/24 networks to the Linux box.
With SUSEFirewall turned off, after I have connected via OpenVPN from my remote computer I can ping all active 192.168.51.0/24 addresses. Other computers on the 192.168.51.0/24 network can ping computers on the 192.168.54.0/24 network. But if I turn on SUSEFirewall, neither of these work. However, I can ping 10.8.54.1 from any computer on the 192.168.51.0/24 network.
How can I set up SUSEFirewall to allow these networks to communicate with eachother?
I have trouble with opensuse susefirewall 2 and my own rules. since i have installed a suspicious download manager, i detect outgoing traffic in the monitor and i want to block ougoing traffic except some apps like firefox, jinchess ...
1) I had to modify FW_CUSTOMRULES="" with FW_CUSTOMRULES="/etc/sysconfig/scripts/SuSEfirewall2-custom" in /etc/sysconfig/SuSefirewall2
2) I had to add my own rules in /etc/sysconfig/scripts/SuSEfirewall2-custom in the appropriate hook
3) I don't know if rules are good.. they seem to work because for example jinchess can't access his server with the DROP rule until i add the ACCEPT rule BUT in fact the download manager still access internet and amarok too when it searches for songs lyrics ! i have discovered it's because the others apps use port 80
I give here the file /etc/sysconfig/scripts/SuSEfirewall2-custom
How to to make firefox use another specified port ? i wanted to use privoxy with tor but it doesn't work .. is there input/output controler on linux (something like zonealarm on XP) ? the trouble is that all outgoing traffic is permitted by default!
Recently after upgrading my kernel (via /repositories/Base:/Kernel/standard) I have had issues with the network not starting properly on bootup. The kernel is 100% SUSE-patched and behaves perfectly outside of that one issue. To get the network to "start" (DHCP issued, eth0 brought up) I have to 'rcnetwork start' in a shell. I've checked to make sure my config is right in both ifcfg-eth0 and 'config' for /etc/sysconfig/network, but nothing affects the outcome.
How do I get the boot scripts to bring up eth0 and issue a DHCP on startup?
Here's the output of 'rcnetwork start -o debug fake':
Code:
I have an openSUSE 11.1 and I noticed that after installing a couple of things on it the sshd is not starting anymore on reboot. how can I debug this problem. Is there a log file so that I can see what was the problem? If I want to use ssh I have to start it from yast every time the computer restarts.
View 7 Replies View RelatedApache is set to start on runlevel 2, 3 and 5, just like MySQL. For some obscure reason this always fails. I tried resetting the runlevels, but this did not help and I always have to start apache manually after reboot.
How can I analyze this problem? In the Apache logs I don't find the cause. Is there an other log I can check?
Running 11.4 x64, I've tried everything I can think of (which is not saying a lot) but I can't get sshd started on boot. Running /etc/init.d/sshd starts the service manually with no problem but I really need it started on boot.
I can't find anything different when comparing this instance with other similar instances where sshd does start but this instance is an update from 11.3 where sshd was not enabled and the others are all clean installs where sshd was enabled during installation, if that makes any difference.
I had installed openSuSE 11.0 and then installed XEN using 'Install hypervisor and Tools' which is present in Computer -> YaST -> Virtualization.
After that I rebooted the machine in XEN mode[Dom 0]. There I installed a Virtual machine[Dom U] with OpenSuSE 11.0 Operating system using the option 'Create Virtual machine'which is present in Computer -> YaST -> Virtualization.
VM[Virtual Machine] got installed successfully and started running in TightVNC. I shutdown the VM and restarted it and it started running successfully.
After that I shutdown XEN[Dom 0] and restarted the machine in XEN mode again to run Virtual machine[Dom U]. But this time I got the below error when I selected the 'Run' option in installed VM.
Traceback (most recent call last):
I get this error when I start gvim:
Code:
I have Onboard Realtek ethernet card (eth0) it worked fine but suddenly it stopped working when i see in yast it shows hwinfo not found. when i use hwinfo --netcard it gives realtek card name thats all. I went to yast >lan> edit> hardware and tried to add r8169 module but it was not accepting. previously created ifcfg-eth0 file is available but its not getting up.when i say ifup eth0 it say interface not found. the same messg is also available in /var/log/boot.msg.
View 4 Replies View RelatedRunning openSuse 11.2-64 on a DualCore / 2Gb machine.I have 3 nfs shares described in my /etc/fstabAll three were mounted at boot time when I was connecting to the network through the wired interface (eth0).I need to use the wireless interface, and even if that interface is up and running well (I use ifup), the nfs client doesn't start... if just after boot I do a mount -a or simply a nfs start, everything comes up and runs well.This machine will not be used by myself, and the users cannot just jump into a command line and type nfs start or even mount -a (they would need su privileges...)I have disabled the eth0, killed the eth0 config (with yast) edited /etc/sysconfig/nfs and setted the NFS_START_SERVICE to yes to force the gssd and idmapd to always start even if there was no nfs entry in fstab, but nothing changed.
View 7 Replies View Relatedkde knetworkmanager is not starting on startup.i am starting this manually every time on login to connect to network..how to make it start automatically?
View 9 Replies View RelatedThe program I want to use: ProppFrexx Tagger or ProppFrexx Meta Data Editor, can be found here: ProppFrexx ONAIR - The Playout and Broadcast Automation Solution I need this to tag WAV files with RIFF INFO Tags.The Sony PSP can read RIFF Tags! so yeah, that's the reason I need this program. here the complete error message
Code:
exception inside UnhandledException handler: USER32.dll
I don't have Windows anymore, and I never going to use Windows again I hope there is a fix for that
I have written a simple perl program to add a command to iptables. Here is my code :
Code:
#! /usr/bin/perl
print "Content-type: text/html
";
system("iptables -A FORWARD -s 192.168.0.2 -j DROP");
I put this file in cgi-bin folder of Apache server. Here is my problem : when I run this file with shell as root user it makes change to iptables, but when I use my browser to run this file, it doesn't make any change. I'm sure this is because Apache doesn't have permission to manipulate iptables. How can I start Apache as a user with root privileges ?
When I boot I get this error:
Starting CRON daemondone
Starting smartd done
Starting VirtualBox kernel moduledone
[code]....
I usually run my updates every Friday, my last good update was 4-Mar-2011. I could not update this week and got an error -"PackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium http://download.opensuse.org/repositories/openSUSE:/Tumbleweed:/Raw/openSUSE_Tumbleweed_standard/'"I get a similar error message when starting Yast Software Management.Is this related to the 11.4 release? I'm waiting for fewer bugs before I upgrade to 11.4, so I'd like to be able to keep current with 11.3.
View 3 Replies View RelatedMy ISP offers the service of native IPv6. So my ADSL router provides me with a local and global IPv6 address. However after a reboot it takes minutes to finally see the global address when using "ifconfog eth0". During that time I can't do a ping6 to an external server, which seems logical. So I waited several minutes, but no global address. After that I started a KDE session, went back to the console(<Ctrl>+<Alt>+F1) and now the global address was there. Is this normal behavior or should I file bug report?
View 6 Replies View RelatedI was about to do upgrade from 11.3 to 11.4.I was following the guide I found in opensuse's website. I was to the point where I had to disable all 11.3 repositories and add the 11.4 at that point I forgot to change my nvidia repository ( I have a g210m graphic card).
thus after the upgrade the X could not start at all. I think this was because Yast could not find the nvidia driver.
Using text mode YaSt2 I added the nvidia driver but after restart I can not see and X running. I receive an error message that the current kernel can not be loaded!!!
I also checked in command line if there is something like Sax2.. but I couldnot find anything.
I am facing two issues with CUPS - 1. I have installed cups 1.3.9 over OpenSuse11 x86. Please check below -
cups:/usr/share/cups/banners # cups-config --version
1.3.9
cups:/usr/share/cups/banners # cat /proc/version
Linux version 2.6.27.7-9-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-12-04 18:10:04 +0100
I have added few printers over there and everything is working fine. I can also able to add - delete - modify any printers from "yast2 printer" command. I can also able to browse cups web interface via http://cups:631, but when I am going to manage the printers (start - stop - delete etc), none of the buttons are working in firefox5 not even in IE also. Older version of firefox is giving error as "This address uses a network port which is normally used for purposes other than Web browsing. Firefox has canceled the request for your protection." All other buttons are working properly.
2. LINUX - LINUX Printing - OK
LINUX - WINDOWS Printing - OK
WINDOWS - LINUX Printing - NOT OK
While giving printing from Windows machine (Printer attached on Linux), there is no problem to coonect the printers, but unable to print.
I install from openSUSE-11.3-NET-x86_64.iso. Installation was succesfull, but after install all packet on test internet / update was error. And after log in in installed system internet not work. I use router with DHCP
View 8 Replies View RelatedI'm working with OpenSusse 11.2. I installed and activated the NFS server via yast2. I exported the relevant directory via yast2 (NFS server configurastion)
I'm trying to setup my Linux target to boot via NFS. The kernel boots up but fails to mount the file system. When looking on a capture from ethereal it can be found that the NFS server return error when client try to mount the /nfstest directory from this server. The returned error is 13
serverip: 192.168.56.130
targetip: 192.168.20.180
gateway: 192.168.20.101
[Code].....
I just installed the LAMP server on my system then rebooted, expecting the daemons HTTPD, MYSQLD, FTPD, etc. to start. When they didn't, I didn't panic I just attempted to run "sudo service start httpd". Surprise, suprise - "command not found". how do I start these daemons?
View 9 Replies View RelatedI installed OS11.4 on my old laptop, Compaq Armada E500., 512MB RAM, ATI Rage Mobility. During installation I chose "minimal server" and added some development packages, lxde and a little more. I chose to start in runlevel 3 which is full networking without X. Still, when computer is booted it tries to start Xorg which doesn't work because of some problem w driver. The start-up seems to stop there, it never loads completely - seems most things in runlevel 3 are not started (see below) I can manually login on laptop and fix it - but never permanently, same thing again after reboot.
I have checked /etc/inittab & yast - both states default runlevel is 3. I have checked services to be started both directly, browsing directory /etc/rc.d/rc3.d/, and with YaST, it is very clear X should not load during boot. But, as said, it does.. I don't really care about the driver problem right now, I can fix that later when I have more time. So how do I stop X from getting started automatically?
More info, if needed: The installation also stopped with message on tty1 "Starting YaST2" and tty8 showing errors with graphics driver (mach64). The system seemed to be installed though, so I simply rebooted (issuing "reboot" from tty2).
[Code]....
I'm not completely sure where it stops, network is configured but keyboard is wrong and mysql & everything after is not started, so somewhere between S02network and S06kbd. I'm going to use it as a server for testing purposes so no X is actually needed - however I do want to have X & lxde installed just in case, my Internet connection at home is terribly slow so I need most things I might need in the future installed today.
I tried removing it and installing again but I still get the same code in the terminal:
[Code]....
I have mounted an NFS share with ISO images on my kvm Server. If i connect such a iso to a VM (using virt-manager) for installing a operating system i get the following error on startup: Error starting domain: internal error Process exited while reading console log output: char device redirected to /dev/pts/1 qemu: could not open disk image /mnt/iso/public/Linux/Distributions/Debian/debian-504-amd64-netinst.iso: Permission denied
The problem is definitly that kvm (or qemu or libvirt-bin, i don't know) tries to set permissions (rwx owner for libvirt-qemu, --- for kvm group, --- for other) on the file, although it has read permissions. Is it possible to change this behavior?
Installed gapcmon 3.14.6 on openSUSE 11.2 using YAST. Have a Back-UPS XS 1500 (model BX1500LCD) connected via USB cable. gapcmon cannot communicate with UPS. Get NIS network error. Had same problem previously and was able to get it working, but can't remember what I did to get it to work. I have included technical details from a hardware scan showing that the connection between my system and USP is working as well as the contents of apcupsd.conf and screenshots.
View 9 Replies View RelatedTrying to add some rules to fail2ban list for bind dns. How to enable logging in /etc/named.conf file, that errors will show in /var/log directoy?
View 1 Replies View RelatedI have opensuse 11.3 . i tried to install xampp but i have problems. when i try to extract the downloaded archive file to /opt with the command line:
I have an error message :
Then when i want to start xampp server with:
It didn't work because the file lampp does not exists in /opt/lampp
The command line ls /opt/lampp/ gives
I am trying to use a ZTE AC2726 USB EVDO Modem on openSuSE Linux 11.3 to connect to the internet.
I have edited the /etc/wvdial.conf file as follows
[Dialer Defaults]
Modem = /dev/ttyUSB0
Baud = 460800
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2
Init3 =
Area Code =
Phone = # 777
Username =card
Password =mypassword
Ask Password = 0
Dial Command = ATDT
Stupid Mode = 1
Compuserve = 0
Force Address =
Idle Seconds = 300
DialMessage1 =
DialMessage2 =
ISDN = 0
Auto DNS = 1
When I execute the wvdial command on the terminal the following error appears:
joey-suse:~/Desktop # wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2
ATQ0 V1 E1 S0=0 &C1 &D2
OK
--> Modem initialized.
--> Idle Seconds = 300, disabling automatic reconnect.
--> Sending: ATDT# 777
--> Waiting for carrier.
ATDT# 777
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT# 777
--> Waiting for carrier.
ATDT# 777
NO CARRIER
--> No Carrier! Trying again.