I set up the 'Proxy' from Yast and they tested successfully. I can connect to internet, but why am I getting 'ERROR 407 proxy authentication required'?
FYI, my comp is the part of company .NET network with bunch of firewall and security...
i have just installed Red Hat linux 9 workstation ,i have configured the lan ip and successfully ping to other pcs on network ..but problem is internet is not working , i have already set the proxy setting, i have windows environment and running isa server 2006 proxy server ,when i trying to browse any site , isa eroor page occur "error code :407 proxy authentication required" Linus machine couldnot prompt the user credentiall.
View 2 Replies View RelatedI try to download the Tomcat from my LINUX machine with command:
Code:
wget -d -v http://archive.apache.org/dist/tomcat/tomcat-5/v5.5.23/bin/apache-tomcat-5.5.23.zip
I got error as follow:
Code:
[root@s003ap23-test opt]# wget -d -v http://archive.apache.org/dist/tomcat/tomcat-5/v5.5.23/bin/apache-tomcat-5.5.23.zip
Setting --verbose (verbose) to 1
[Code]...
I have a problem with the NTLM proxy we use in school. YAST proxy configuration won't work, it just says authentication error. We have to login with the user in DOMAINuser style and a password, in Firefox it works.
View 6 Replies View Relatedwhen i use the terminal, and i run "sudo apt-get update", there is a notification which says, "407 proxy authentication required". i use the internet of our school which requires its users to log into its proxy server so that the user can have access to the internet. the problem is i cannot run update or install commands through the terminal, though i can connect to the internet through firefox.
View 1 Replies View RelatedI would like to use a wireless network from Ubuntu. In the network drop-down menu I select a network (this is a University network I have an account there). Then I get a windows with the following fields:
Wireless Security: [WPA&WPA2
Enterprise] Authentication:
[Tunneled TLS] Anonymous Identity:
[] CA Certificate: [(None)]
Inner Authentication: [some
letters] User Name: []
Password: []
I put there my user name and password and do not change default value and leave "Anonymous Identity"blank.
As a result of that I get "Authentication required by wireless network". How can I solve this problem?
I think it is important to notice that our system administrator tried to find some files (which are probably needed to be used as "CA Certificate"). He said that he does not know where this file is located on Ubuntu (he support only Windows). So, probably this is direction I need to go. I need to find this file. But may be I am wrong. May be something else needs to be done.
If the wifi network gets disconnected why is the wireless authentication key needed again and again...cant ubuntu store and retrieve it...
View 9 Replies View RelatedAfter having problems with lxde crashing while running Jessie, and re-installing Wheezy, I am not able to mount my WinXP drive. In the past I was able to run pcmanfm and mount the drive from there. It would ask for my root password and then would mount the drive. Now, however, when I click on the drive icon it gives me an error message saying authentication required.
One thing is that when I installed Wheezy I had the WinXP drive disconnected so as to not inadvertently install Wheezy on the wrong drive (I have two identical drives). After installing I connected the WinXP drive and then did a grub update. I can boot either drive, as expected, but I can not mount the WinXP drive from pcmanfm. Do I need to change the Policykit?
When my router switches off... the wifi signals go off... then why the hell ubuntu keeps on connecting to that very wifi like hell and when doesnt connect shows the prompt to manually connect... with the wifi key already filled in... whats the use of saving the key when it has to ask the question from me either to connect or not?? and if its isnt available... just wait when its available.. and for the prompt,i have only option to cancel(because wifi isnt available at that moment if i select connect it again tries to connect like hell..which it cant) and if i cancel it wont auto-connect when wifi does get available! what the heck?
Windows has this done the right way... when the wifi isnt available.. it dissconnects silently.. and when it becomes available connects silently.. why isnt this been done this way in ubuntu??
Ive attached an image..one can see in the image that it says "authentication required by wireless network" when there isnt any.. as router has gone down!
And the second thing i want to report is that there is no way to report this bug from ubuntu... the launchpad.net talks of going through bug reporting process which is done against a definite package... now how does a user know which package would be causing this error?? there should be a more clear process of reporting such bugs to ubuntu team... which a common man using ubuntu( ubuntu says its most user friendly of all distros right?) can report..
I'm extremely new to SuSE Linux. I wanted to move away from Windows and so I decided to reload my Desktop with SuSE linux.I have had no trouble until now. I'm trying to connect to my work VPN connection. From my laptop (which unfortunately is Vista) I'm able to connect without any issues. However, when I tried out the KVPN application on my SuSE linux, it just doesn't work. I get the error:
Authentification has failed.
As a side note, when I type ping google, the packets are received 100% but when I ping my company address, no packets are received. Hope this info is useful.
I put a cd or dvd in and i get this error message "Unable to mount ..... Authentication is required" What's going on? i used to be able to do this no problems
View 1 Replies View RelatedHow do you get SSH to use a socks proxy? I have tried:
Code:
ssh -o "connect -5 -S socks_proxy:1080 %h %p" host_server 22
I have tried to use socksify but I am not sure how to setup the client.
I have a network and am using squid proxy with authentication I want to create another subnet without authentication.
View 1 Replies View RelatedWhen I try to add a printer using this web interface.I get stopped at authentication required.I put the root login and pass but
401 Unauthorized.Enter your username and password or the root username and password to access this page. If you are using Kerberos authentication, make sure you have a valid Kerberos ticket.
I downloaded openSUSE-11.4-KDE-LiveCD-i686.iso from software.opensuse.org: Download openSUSE 11.4 yesterday.It's a liveCD,not a DVD. Then I used a dd command to make a live USB by the instruction from this page:SDB:Live USB Then I shut down the computer,and boot from the usb. I went to the yast--DSL to make a new adsl connection.But after I configured everything,yast told me one package needed.The package's name is "linux-atm-lib". I haven't connected to internet.How could I do to install a package and make a connection?
Now I am downloading a DVD.Does a DVD include the package called "linux-atm-lib"?
I get this error when I try and mount a WD Passport external hard drive. Has anyone run into this before?
View 14 Replies View RelatedI have had some help with root password su and sudo su, but I can not find the correct password to install or remove programs. I keep getting the same message ' Authenticate' Authentication is required to install software packages. An application is attempting to perform an action that requires privileges.Authentication is required to perform this action.Then it asks for a password, I've tried enter, seacats, knoppix, user, and my root password. None of these work I seem to be a second user and not the owner.
My Linux language is very low, but I am learning, right now in order to find or try to install software I go through the startup menu> preferences> software center. Is there another way to find and install software that doesn't require and authentication password? If so where do I find out the steps to do this? Hands on is always the best teacher.
I am trying desperatly to install boxee onto my pc Boxee - Watch Movies, TV Shows and clips from the Internet on your TV.without success.I have downloaded the source code from the site and have ran
./bootstrap
./configure
The ./configure last few lines =
checking for boost/shared_ptr.hpp... yes
checking for main in -lGL... no
configure: error: Could not find a required library. Please see the README for your platform.
I'm not sure what this lGL is referring to. The readme states that I need the below to run the configure, though that doesn't say lGL either?
Build-Depends: debhelper (>= 7.0.50), quilt, python-support, cmake,
autotools-dev, autoconf, automake, unzip, libboost-dev,
libgl1-mesa-dev | libgl-dev, libglu-dev, libglew-dev, libmad0-dev, libjpeg-dev,
libsamplerate-dev, libogg-dev, libvorbis-dev, libfreetype6-dev,
libfontconfig-dev, libbz2-dev, libfribidi-dev, libsqlite3-dev,
code....
I have gone through a good number of distros all the way back to Slackware but I'm struggling to get my brain moving in the right direction again. I am working to enable sendmail and, from what I've read, it appears that newer version of sendmail are installed with milter but I can't seem to locate this. I am running v11.4 so I'm wondering if this is just not the case? I don't have a problem reconfiguring/recompiling the sendmail conf files but would rather not if it's not required. For the record my ultimate goal is to have the spamassassin and clamav milter's installed and using the home server as our primary email.
View 7 Replies View RelatedI have created a CA on my server then created a server certificate under that then exported it as a common server certificate.I have then gone to my LDAP server and enabled TLS and told it to use the common server certificate.Now on my client I have enabled LDAP TLS/SSL and it's asking me to download a certificate ... from where ? Do I export the certificate to a file and put it on a web server.If so what format as the export offers loads.
View 1 Replies View RelatedI've just installed OpenSuse 11.2 64-bit and, on the whole, I'm pretty happy with it. I'm connected to the network and I am posting this from my new system. However I cannot get any software updates or install new packages
I'm behind a (non-authenticated) proxy and, obviously, Firefox has no problem.
If I use Online Updater I just get error messages like this:
PackageKit Error repo-not-available: Failed to download ./repodata/primary.xml.gz from Index of /update/11.2
(but the site is available in Firefox).
I have tried manual updates through Yast (after setting the proxy) and get pretty much the same thing.
So far I have set the proxy in:
Firefox
/etc/sysconfig/proxy
/etc/PackageKit/PackageKit.conf
Computer -> Yast -> Network Services -> Proxy (That has a test function which confirms it is working).
Applications -> System Settings -> Network Settings (This tells me that the network settings are controlled by NetworkManager and can't be modified by Yast).
[Code].....
I set HTTP proxy: http://10.*.*.*:6666/ choose Use the same proxy for all protocols fill my user name and password An error occurred when testing:
* Port number too large: ****** (password number)
curl: (3) Port number too large: ****** (password number)
* About to connect() to proxy 10.*.*.* port 6666 (#0)
* Trying 10.*.*.*... % Total % Received % Xferd Average Speed Time Time Time Current
[code]....
I'm trying in the company where I work to persuade my co-partners to move slowly into the world of linux, but because everything are set up on Windows is quite difficult. Though I can install at least in one PC openSuse or Ubuntu (I prefer openSuse), but the problem is that I have to find a way to make the authentication to a Windows Domain, which is running Windows Server 2003.
How is this possible? Is this procedure painless or I have to read a lot of staffs in order to make it work? I would be obliged if you could give me some steps on how to do it. I can't stand windows any more
I'm using openSUSE 11.1 and would like to authenticate vsftp users against a mysql database. The newest version of pam-mysql I can find is from 2005. I'm concerned about using something from what appears to be a dead project. Is there an alternative? I'm trying to come up with a solution where I can manage FTP users from an application running from Windows desktops.
View 1 Replies View RelatedOn this moment i configure a testenvironment with 1 Microsoft active directory server and 1 Opensuse 11 samba filesharing server. But i have a issue. The samba server is add to the domain and the servers can communicate with eachother. I can login to the domain on the samba server and the LDAP settings tab on yast2 samba configuration tool tell me that samba and the MS LDAP server can communicate with eachother. I can see the shares on the samba server but i can't autenticate myself. When i whant to logon than see i always "domain: domainname.local" and "access denied". My question is now how can i give the MS administrator account rights to view the shares and configure the rights for the other users.Samba config file
PHP Code:
[global]
workgroup = WIN-FVJBNQIJE9O@WOENSDRECHT.LOCAL
[code]....
I need to have Opensuse 11.2 use my proxy server here in the office and it is by hostname/ip:8080 only not HTTP. The problem is using Yast2 I don't have the option of using the proxy that way it wants http. I've been using opensuse on and off since 9 (great flavor BTW my favorite) Easy as you need it to be and just as complicated as you want it to be, a perfect mix.
View 8 Replies View RelatedI have installed openusese 11.2 since about 2 months ago. Everything running well. But since the network admin deploy proxy server, I couldn't get update than.[URL]this problem, was that related to proxy settings?Or did I miss something else?
The proxy I set is not being used or recognized by some apps. For instance dropbox would be able to detect the proxy settings i set using yast>network>proxy while firefox would not recognize it. In firefox i tried using the automatic proxy and using the system proxy. Either of the two won't detect it. However, when I manually set it in firefox's preference it would work. For empathy the proxy is not recognized as well. In addition, can I set the proxy in the empathy app itself? I could not locate it. Also the online updates and repository checks recognizes the proxy I set up.
By the way I am using GNOME 3 as my DE. I would also like to share that when I use the network settings > proxy of gnome 3 none of the apps recognize the proxy.
I work behind an ISA proxy. I have to authenticat with domainuser. When defining proxy settings with yast, I cannot put "domainuser" in the URL, so I add it in text mode in /etc/sysconfig/proxy for all protocols. Example: [URL] Then I have to logout/login in order yast to work.
BUT:
- I cannot add communauty repositories.
- zypper fails
In order to make zypper and adding repositories to work, I have to suppress one of the two back-slash like:
[Code]..
I installed openSuse 11.4 (KDE). It was excellent - everything was working great except for Subversion which use to work fine on 11.3 (command line is broken on 11.4, Eclipse/Subclipse works fine on both).
Subversion kept going to the proxy server instead of going directly to our internal Subversion server. I tried (1.) setting the proxy settings in Yast with excluding for our Subversion server, (2.) tried adding the usual settings in ~/.subversion/servers (which worked fine in 11.3). I could not check out on the command line from the local server, I can check out from external servers, eg: Google.
(I installed from the live CD download. I think this is using something some plasma widget thing for the network management.) Why is Subversion not using the usual ~/.subversion/servers file for its settings in 11.4 (KDE)? What is it using and how can I make it not use the proxy server? (Someone else mentioned his Subversion only started working after he used some Chrome plug-in to change the proxy settings but had no idea why?)