OpenSUSE Network :: Encountered An Error With Pppd On Both 11.2 And 11.3
Dec 23, 2010
I recently encountered an error with pppd on both openSUSE 11.2 and 11.3. I use umtsmon (which uses pppd) to connect to the internet with my 3G device. Yesterday for some reason it just plainly refused to connect to the internet. I have been using the same configuration for almost a year now without any issues. I tried it on 4 different computers running 11.2 and 11.3 and all of them failed. Thinking that it is the hardware I borrowed a windows laptop and tested it on that, only to find that it works flawlessly. On my network server I sometimes use the device as a backup and activate it with "ifup modem0", for some reason this also now fails.
After doing some troubleshooting I managed to extract the following from pppd.
Running it with my user account:
pppd options in effect:
I have no idea why pppd would break all of a sudden but I expect it might have been an update that broke it since I have automated updates on all of my systems.
View 1 Replies
ADVERTISEMENT
Feb 20, 2010
If I connect with a 3g modem or with wireless sometimes the resolving does not work. This happens on opensuse 11.2. nslookup and dig works but nor ping nor ssh nor any other network application does work If I modify the /etc/resolv.conf after connecting to a wireless network for example it does not work even the dns are known And more strange if the resolver works and I modify /etc/resolv.conf with known dns the resolver does not work anymore. BTW: the dns entry from the wireless is 192.168.1.1 and I do not have any idea how the wireless ap is configured... so it could be in this case that dns is not forwared only allowed to use 192.168.1.1 but the other case is a 3g modem which not even the propagated dns entries works in the bad case
View 9 Replies
View Related
Jan 26, 2010
while trying to set up Xen Virtual Nodes we encountered one issue with the network (which is why it is posted here On the DomU the interface is provided by a bonding -bond0- of three NICS. Now the Xen network script a) does not take this bonding b) destroyes even this bonding From a number of posts I assume I have to configure this by hand, correct? Is there an instruction how to do this? Simply create a bridge on top of bond0??
View 1 Replies
View Related
Jul 8, 2010
I previously had an Openswan-based IPsec/L2TP solution that was working marvelously on Ubuntu 8.04 LTS. I upgraded to Ubuntu 10.04 LTS and cannot seem to get it working again.
First, Ubuntu's version of Openswan (2.6.23) does not work with NATted transport mode [1]. Since an L2TP connection is in transport mode, I downloaded Openswan 2.6.27 to /usr/src/, and ran "make programs" and "make install".
This allowed my IPsec and xl2tpd configuration that I previously had to work again like they were supposed to. (Aren't you relieved this isn't an IPsec question?)
Anyway, xl2tpd starts up an instance of pppd for the new incoming connection using /etc/ppp/options.xl2tpd. But for some reason my previous configuration was not working. After hours of searching and tracking things down, I've narrowed it down to the following lines in my options.xl2tpd file:
Code:
require-mschap-v2
plugin winbind.so
ntlm_auth-helper '/usr/bin/ntlm_auth --helper-protocol=ntlm-server-1 --require-membership-of="EXAMPLEDOM\VPN Users"'
[Code].....
View 3 Replies
View Related
Aug 21, 2009
I am trying to use rsync to keep 2 machines in sync. I get the following error sometimes. If I rerun the rsync it usually works.
IO error encountered - skipping file deletion
View 1 Replies
View Related
Feb 27, 2009
I use web server apache use php fastcgi (Centos 5.2, apache 2.2.9 , php 5.2.5 and fcgi-2.2.4 ). I receive error : "The server encountered an internal error or misconfiguration and was unable to complete your request. contact the server administrator, no-reply@zz.vn and inform them of the time the error occurred, and anything you might have done that may have caused the error. I view log :
[code]...
View 1 Replies
View Related
May 4, 2010
my iwlist scan is normal. ethernet connection ok, wirless not working but does seem to receive. wifi radar lists my router ssid. Does this say I have the correct router for my wireless is my question? I am also getting this error message with this system on KDE, LENNY. From KWLAN a wpasupplicant front end.
"you do not have permissions to start pppd or pppd was not found. Dial up networking will not work."
[code]...
View 2 Replies
View Related
Feb 1, 2011
I'm trying to make some pages. For this I try to host them locally. However, when I have an error in my PHP code, the server shows an internal error 500 page and doesn't show on what line and what compile error it encountered. There is no such information in the error log either. What should I do about it, it's not really nice to comment all the lines and then try to uncomment them one by one. I've been googling for a while, but didn't find anything.. I forgot to mention, I;m using Fedora :P, the apache that came with it and mysql and php from the repository...
View 3 Replies
View Related
Aug 22, 2009
While doing 'yum update' an error message was issued during clean up phase:
Code:
Cleanup : elfutils-libelf-0.141-1.fc11.i586 110/180
ERROR: Module uprobes does not exist in /proc/modules
Cleanup : systemtap-0.9.9-2.fc11.i586 111/180
Does this represent some kind of problem or can I just ignore it?
View 3 Replies
View Related
Dec 13, 2010
I got the error: "An unrecoverable processor error has been encountered. The virtual machine will reset now." I have edited the options in installation screen with adding noreplace-paravirt at the end of boot parameters. but still have this error and FC installation does not continue.
View 11 Replies
View Related
Jul 14, 2010
I installed Fedora 12 at school on my external hard drive, using Windows Virtual PC 2007 to run Fedora at school on a dell PC with XP 2000, which works at school!However at home, i am using Windows 2007 os, I install Windows Virtual PC 2007, wasn't successful in running Fedora 12.As soon as Fedora begin to boot, an error message appeared which said,"An unrecoverable processor error has been encountered.The virtual machine will reset now".below the message it gives you only option to reset the virtual machine, however this is a vicious cycle
View 1 Replies
View Related
Jan 8, 2011
I recently had a hard drive on a computer (not to be obvious), and I fried the computer. You may ask "well why did you do that?" well, simply because I had accidentally bumped and switched to 220 volts, rather than keeping it at 115 like a sane individual. Anyway, I got a new computer, swapped the hard drive. When I go to boot into ubuntu though, it gives me the following error:
Code:
Ubuntu is running in low-graphics mode
The following error was encountered. You may need to update your configuration to solve this.
(EE) No devices detected.
I also have XP on this hard drive, and it works almost better than it did on my old one, surprisingly. all i have to do now for it to be labeled as efficient, is to get some RAM. But anyway, what can I do about the error message? I tried booting into recovery, running dpkg from the list of options, and it did a couple of things.
View 3 Replies
View Related
Feb 7, 2011
I am trying to run Fedora 14 from Virtual PC 2007 on Windows XP. Every time I try to boot it, it flashes some code and shows a blue screen with the Fedora logo for a fraction of a second. It goes to an ms-dos type screen with a white background and a single "[" in black. Then I receive an error saying "An unrecoverable processor error has been encountered. The virtual machine will reset now." I have googled many times and have scavenged the Fedora site for a solution, yet I have not found one for Fedora 14.
View 3 Replies
View Related
May 25, 2011
I'm completely new to Fedora. I've tried using both Rhythmbox and Exaile to no avail. I keep getting a message that says "Playback error encountered! Your GStreamer installation is missing a plug-in." I have searched all over countless forums and blogs trying to figure out this issue. I went into add/remove software and searched GStreamer and basically checked everything that appeared to be what I needed, but that still hasn't worked. Insanely annoying not being able to play my music and even more annoying because I never had this issue with Ubuntu.
View 1 Replies
View Related
Aug 8, 2010
When I first got Ubuntu a few weeks ago, and got the older version of Wine from the Software Center, and it could run pretty much any game I wanted. Albeit really slowly. Well, I upgraded to 1.2 using the instructions on the wine website, and now a couple of my low-power games (like Bootfighter Windom XP) run totally perfectly, but a lot of mainstream games like Mirror's Edge and Mass Effect 2 just crash when I attempt to open them, and all they all have the same message where the main .exe file has "encountered a serious error." Here's what the terminal gives me:
Code:
Backtrace:
=>0 0x68286bbe in libc.so.6 (+0x110bbe) (0x033bd9c0)
1 0x693815a1 in winhttp (+0x115a0) (0x033bea20)
2 0x69381aa1 WinHttpQueryDataAvailable+0x60() in winhttp (0x033bea70)
0x68286bbe: fmull 0x488bdc4a(%ecx) .....
View 7 Replies
View Related
Aug 19, 2010
I'm having some trouble installing Ubuntu 10.04. What I am trying to do is completely wipe all things on my computer and install Ubuntu. I have followed the instructions from Ubuntu's homepage on how to download the ISO, and ran their program to put it onto a portable USB device. Through doing all of this, I receive no error messages. Then it tells me to change the BIOS to boot from USB, so I did that. I've successfully accessed the install menu and filled in all the information requested (i.e. computer name, account name, etc.). I select that I want to delete the current partitions and use only Ubuntu. It starts to install, but at 67%, while copying files, I receive an error.
This error is:
The installer encountered an error copying files to the hard disk:
[Errno 5] Input/output error
This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment.
View 9 Replies
View Related
Apr 29, 2011
Code:
Reading package lists... Error!
E: Encountered a section with no Package: header
E: Problem with MergeList /var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_natty-updates_universe_i18n_Translation-en
E: The package lists or status file could not be parsed or opened.
Get this kind of error while trying to update Natty.
View 5 Replies
View Related
May 27, 2011
I'm a first time user of xubuntu or any other linux derivative operating system and I was wondering if I could get some assistance on installing xubuntu 11.04 on my old laptop. When I downloaded the iso and burned it into a DVD+R, I inserted it into the machine and let it ran. It started well and I checked the disc's integrity before continuing with the installation and it passed that. Now, as I enter the installation screen, I select my language then click forward but the installer freezes for a few minutes and later disappears only to be replaced with an error message, "The installer encountered an unrecoverable error. A desktop session will now run so that you may investigate the problem or try installing again." and it does as it says and boots into a demo mode. I try installing again through the "Install Xubuntu.." link on the desktop but it follows the same problem.
My laptop's specifications are as follows:
ACER TRAVELMATE 290
256 RAM (240 usable)
Intel Pentium M processor 1500 MHz 599 MHz
Video card: 64 MB internal Intel 82852/82855 GM/GME Graphics Controller
Sound card: Realtek AC97 Audio
View 2 Replies
View Related
Jun 5, 2011
I have an error message that I do not understand nor know how to resolve:
E: encountered a section with no Package:header
E: Problem with MergeList/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_natty_partner_b inary-i386_Packages
E: The package lists or status file could not be parsed or opened.
E: _cache>open() failed, please report.
I hope this is simple for some of you!!! I do not have a clue what this means, I'm pathetic.
View 3 Replies
View Related
Jan 6, 2010
Personally I have an intel PC which runs Ubuntu 8.04 smoothly. I tried booting the live-cd from an AMD athlon and encounterred the above mentioned message as an error after loading. I went into the bios and disabled the floppy drive as a third booting option as the machine does not have one in it but I still encounter the same problem. I can insert the floppy drive but doubt that would work?
View 1 Replies
View Related
May 19, 2011
i am graduate student and my X colleague gave me this Fortran 77 program to run my result files with. She is no longer reachable. I compiled the following program with gfortran, it compiled well but, when i run it, gave me end of file error. My output file (which is the input file for this program (DFILE1) ) has about 78,000 lines of velocities of atoms (Vx, Vy, Vz with 1000 steps.. an example of some of the atom's velocities in the 1st step is given at the end of this program). I will be highly obliged if any one can help me with this.I run this program on opensuse linux 11.3 version /32 bit/i586
error message:
Code:
At line 124 of file v.autocorrelation.f (unit = 10, file = 'DFILE1')
Fortran runtime error: End of file
Code:
PROGRAM TCORR
COMMON / BLOCK1 / STORX, STORY, STORZ
COMMON / BLOCK2 / VX, VY, VZ
COMMON / BLOCK3 / VACF, ANORM
C *******************************************************************
code....
View 6 Replies
View Related
Jun 27, 2011
i am having following error: /usr/src/dahdi-tools-2.4.1/ppp :this is my current path when i use make here i get below error pppd version not found (in patchlevel.h). Install ppp source/headers and/or ./configure --with-ppp=PATH. exit 1 make: *** [dahdi.so] Error 1
View 1 Replies
View Related
Dec 1, 2010
I am getting error "exec: chat: not found" while trying to run pppd.
View 1 Replies
View Related
Mar 29, 2011
I was trying to convert a flac audio to mp3 using soundconverter & its failing with the error:
Quote:
GStreamer error: Gstreamer encountered a general stream error.
I should note that the flac is a rip of an actual Mono Vinyl disc. Am not exactly sure how that was done but I was interested in converting some those files to ogg & mp3. OGG conversion doesn't give any error.
Below is the result when launching soundconverter from the terminal & trying to convert the flac file(s) to mp3 (i just tried ogg to mp3 & the same error occurs):
Code:
$ soundconverter
SoundConverter 1.4.4
using Gstreamer version: 0.10.28, Python binding version: 0.10.18
using gio
[Code].....
View 6 Replies
View Related
Apr 16, 2010
I'm trying to get a daemon to start automatically using an init bash script - i suppose this is what it is called. This is what I did to 'install' the script.
sudo cp inittestdaemon /etc/init.d/
sudo update-rc.d inittestdaemon defaults 91
sudo chmod 777 /etc/init.d/inittestdaemon
The script didn't work, so I tried running it directly on the terminal and this is the error which i got:
[Code]...
View 3 Replies
View Related
May 1, 2010
I'm installing 10.04 using Wubi, Wubi finishes and asks if I want to reboot, I reboot and select Ubuntu. The installer seems to progress, however later the following pop-up appears
"The installer encountered an unrecoverable error and will now reboot"
View 9 Replies
View Related
Jul 26, 2010
I seldom mess with Wubi because I prefer a true dual-boot but due to a recent reply in the following bug report I thought it might benefit Colin Watson to have a first hand source of the problem:[URL]Then "bcbc" replied in post #273 and shortly after the thread was closed Now, I've had precious little time to do much testing and such lately due to an overdue remodel that was needed due to a kitchen fire over two years ago, and weather related problems have just nailed me big time to-boot, so I'm sorry if I seem more scatter brained than usual, but such is life.
Anyway, I did as "bcbc" suggested but it appears that Verbose Mode is no longer supported in 10.04 Wubi I do not currently have a working camera to take a shot of the options provided if hitting Esc after the initial install but it just drops me to a grub> prompt.I've tried disabling every bit of the Win XP security, defragging, reducing and increasing the default size of the Wubi install, etc, etc, etc!Any Wubi experts out there?I'd like to test for regression regarding those grub2 updates but I can't unless I can install 10.04 Wubi on this test machine Also, I can't currently network more than one computer, so ssh is just not possible. I have no room! The moral of that story is to NEVER live in a home while you're remodeling
View 2 Replies
View Related
Nov 4, 2010
Everytime I try to install, or unistall anything, I get an error:
Errors were encountered while processing: man-db
There are a few different ones, but they all have that.
View 3 Replies
View Related
May 7, 2011
I have Ubuntu 11.04 and whenever I install gnome3, I will get an error during the install. Following are the details.
"sudo apt-get dist-upgrade".
I will always get an error pop-up and a error message in terminal saying
"errors were encountered while processing: /var/cache/apt/archives/gnome-session_3.0.1-0ubuntu~build1_all.deb" &
"E:sub-process /usr/bin/dpkg returned an error code (1)"
And when I reboot, I will get stuck at the ubuntu splash page and ubuntu will not load.
View 2 Replies
View Related
Jun 2, 2011
I have an Asus eee 1000. Was running Ubuntu 10.04 netbook remix quite happily for some months until recently when I had some problems and decided to reinstall. Unfortunately that is when my real problems began. I have tried using various CD.s with Ubuntu 10.04 desktop and Ubuntu 10.04 Netbook remix.
Both give the same error - The installer encountered an error copying files to the hard disk: [Errno 5] Input/output error
This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment.
I tried using an SD card to install - that also gave errors. I tried installing Windows as much as I hate it and, annoyingly, that installed without any problems whatsoever. Then I tried using the Alternate Install disc. That gave me a different error - did everything and apparently installed a "basic" system but failed to install software. Struggled to find an answer to that. How I can get Ubuntu 10.04 back on my netbook. As it stands at the moment I am rapidly coming to the conclusion that I will have to install Windows or buy a new netbook - this seems preposterous!
I have seen that many people have this error and so it seems like some sort of bug. The only clue I had is that I did succeed in installing Ubuntu on my second 32 GB SD (the netbook has two (an 8 GB and a 32 GB). Unfortunately this SD appears much slower than the first so I erased it and went back to trying to get it on the 8 GB as before. Now it won't install on either - gives the same error. I do not believe that both my SD.s can be faulty and so I can only assume that somehow they both need erasing or formatting or something before I can reinstall.
View 1 Replies
View Related
