OpenSUSE Network :: Linksys Wireless WMP600N - Error Suse 11.2 - System Freezes
Feb 13, 2010
I bought the wireless PCI network card WMP600N from Linksys. I tried to connect with my router, but no success. The correct driver is installed(RT2800), the necessary package WPA_supplement is also installed. My providers settings are WPA-PSK with a shared key. Key encryption is TKIP. I can't choose TKIP in the Yast network menu. so i chose passphrase.
the weird thing is that the wifimanager says WEP is on but it's not, at least not in my router and i did not setup WEP to. see picture 6. i had to use manual boot "ifup wlan0" because when i use boot at startup the whole systeem freezes. anyway, when i use ifup wlan0 as root in the konsole, the system also freezes. i have explained it clearly, please take a look a the pictures.
step1
step2
step3
step4 After pressing enter the system freezes.
View 9 Replies
ADVERTISEMENT
Jan 24, 2011
I'm having some trouble connecting to the wireless network here at home. The PC has a Linksys WMP600N wireless network card, which works fine under several versions of Windows. In Opensuse however, I cannot get it to find the network. Even though my laptop is right next to it, which has perfect connection to the network. The router is a Linksys WRT610N.
I've tried running iwconfig and iwlist scan in the terminal, but the scan returns no results and iwconfig indicates it does not have a connection to a network. I've turned off IPv6 as I read this can sometimes cause issues. I've also tried issuing the computer a static IP address, figuring the DHCP might be causing problems, but all to no avail.
View 9 Replies
View Related
Jun 20, 2010
I'm try to setup a wireless network with my linksys wireless router and my HP laptop dual booting Vista & Suse 11.2. I have the vista networked, just fine. Where I can share files and the printer connected to my desktop. But I want to be able to use Suse in the same way, full time and to stray away from Vista. My wife and kids like easy. So I'm trying to transform them and show them something new.
View 9 Replies
View Related
Apr 27, 2009
I'm trying to install a Linksys WUSB600n dual-band USB wireless-N adapter onto a desktop system with opensuse 11.1 installed; this system will be migrating to a back porch with no cabling access, hence the wireless solution. Everything works fine under Windows XP, but on Linux, not so much. Hardware info is as follows; there is no "Wireless LAN" entry, but there is a USB entry:
99: udi = '/org/freedesktop/Hal/devices/usb_device_1737_71_noserial'
info.subsystem = 'usb_device'
usb_device.vendor = 'Linksys'
usb_device.bus_number = 1 (0x1)
linux.subsystem = 'usb'
usb_device.product = 'Dual-Band Wireless-N USB Network Adapter'
info.product = 'Dual-Band Wireless-N USB Network Adapter'
[Code]........
View 9 Replies
View Related
Dec 4, 2009
How to get the Linksys: Wireless-N PCI Adapter with Dual-Band (WMP600N) working under FC10 with WEP encryption and linking up to a 54Mb/s Network. Hardware : D945GCLF2 with Intel atom330, 2G memory. As I got to this in a roundabout way, I would recommend that you follow the following steps and see if somewhere along the line your wireless starts working.
1: Get the latest driver from Ralink: [URL] In my case 2009_0918_RT2860_Linux_STA_v2.2.0.0.tar.bz2 (the line starting with RT2860PCI) Unpack, read the README_STA file and follow the instructions. Do: make && make install After this I could only get a wireless connection by doing:
[Code]....
View 1 Replies
View Related
Feb 13, 2011
I tried out ubuntu and I was beyond impressed with this OS. I decided it was time to do a complete migration to ubuntu. I installed Ubuntu 10.10 on my HP laptop and everything went great. It detected all the drivers and my laptop is working in tip top shape. I decided to install ubuntu on a custom PC I recently bought (used for Java development), and that is when I started to run into problems. These are the specs on my custom pc:
[Code].....
I am using Ubuntu 10.10 64-bit edition on the system. First problem I am having is there is no audio on my system. For this card I'm using an HDMI cable to connect it to my screen. I installed the NVIDIA proprietary drivers and there was no audio. I reverted back to drivers I found on the NVIDIA website and still there is no audio. Second problem I am having is attributed to the wifi card I am using (I think). I keep getting this message on boot after post (and on the terminal after I switch off the X server by stopping gdm):
[Code].....
However, after the system boots I can connect to the internet.
View 1 Replies
View Related
Jan 17, 2010
/sbin/lspci reports this: 01:00.0 Network controller: RaLink RT2800 802.11n PCI iwconfig reports nothing Network manager doesn't see it. The card works when I run it from Win 7. I tried rt2800 and rt2860. no results I am fairly new to Linux and I don't know all of the command line functions, How to get my wireless PCI card detected. After I installed the rt2860 driver, I didn't reboot. After rebooting, the card lit up and now I am functional. Woo Hoo.
View 1 Replies
View Related
Oct 28, 2010
i have just installed 10.10 under wubi, first time trying to use this network card under ubuntu. works fine on XP where it connects with good signal strength to a zyxel p-600 b/g router (my 3 other machines also connect fine to this router)
i am using WPA2, it takes 30secs to 1min to connect in the first place, then runs slowly and with intermittent disconnects, reports good signal strength in network manager.
i have been fortunate enough to have 3 machines that run ubuntu flawlessly out of the box..
View 1 Replies
View Related
Aug 9, 2011
I have installed Suse 11.4 from the Gnome liveCD, and I "can" access my home network when it is unsecured, however, I can't access it when WEP is turned on. Now, I know that WEP is insecure but there are devices on the network that only supports WEP so the router settings can't be changed. Also just for testing purposes i have tried the WPA2 encryption method to no avail (dmesg reports that the connection timed out). The only encryption method that looks promising is the open-wep encryption. When trying to connect to the network (with open-wep turned on) I have performed a bit of checking to see what is going on, now I don't know much about in-depth linux and stuff but, below are the outputs from lsusb, dmesg, iwconfig, and ifconfig.
lsusb
Code:
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 077b:2219 Linksys WUSB11 V2.6 802.11b Adapter
dmesg
[Code]....
View 9 Replies
View Related
May 24, 2009
I'm new to openSUSE and as a matter of fact, to linux too. I've got a Linksys WUSB600N wireless adapter which used to work fine with some live versions of linux that I was testing out before moving onto suse... Each time, upon booting using live CDs, I used to copy the driver I had downloaded from:
SpeedShare - Download rt2870-kernel-2.6.24-nemesis.tar.bz2
Then 'make' and get into the driver's os/linux directory to load the driver using 'insmod rt2870sta.ko' Now, upon doing a 'make' and 'make install', followed by the 'insmod rt2870sta.ko', I get the error saying:
insmod: error inserting 'rt2870sta.ko': -1 Invalid module format
I tried doing 'modprobe -rv rt2870sta' and didn't get any error messages. But while doing 'modprobe -v', this error shows up: insmod /lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko
FATAL: Error inserting rt2870sta (/lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko): Invalid module format
View 7 Replies
View Related
Mar 21, 2011
I'm running OpenSuse 11.4 with kernel (2.6.37.1-1.2-desktop i686) and KDE 4.6.00 "release 6".When I first installed the system the KNetworkManager found my wireless network. After entering my details it suddenly couldn't find it any more and hasn't found it since (even after re-install). My network is definitely working. I did try and set it up with ifup but it still couldn't find any network. Unfortunately I don't know anything about networks even less about wireless ones. Many thanks in advance.
View 9 Replies
View Related
Oct 5, 2010
I don't know how to change the dns to the dns of Google 8.8.8.8 as primary and 8.8.4.4 as secondary
in version 11
there is icon marked as update dns service via dhcp after u unmark it u can put it manual
in 11.3 there is no icon
+ there is no separate icon for the dns configuration in the network service category
so how can i change the dns?
View 9 Replies
View Related
Jan 18, 2010
I just installed SUSE in a VMware to test it out. A problem i've had with VMware before was getting the wireless to work. I was wondering if anyone knows a way to get the wireless to work over the VMware and in SUSE. I know this may not particularly be a SUSE question but all I saw in the VMware forums was one response that said it was not possible.
View 1 Replies
View Related
Dec 21, 2010
anyone knows how to sure files between two suse's connected to ad hoc wireless linux
View 3 Replies
View Related
Apr 12, 2011
I installed OpenSUSE11.4 yesterday.The dual boot option works.The wireless works in win 7 but I cannot get it enabled in SUSE.Is there a reason why the keyboard keys will not work to enable the wireless.I have an acer laptop.
View 3 Replies
View Related
Dec 27, 2009
i have installed openSUSE 11.2 on a dell dimension 2400. My Ethernet card wasn't working, so i am using a wireless interface, but it doesn't work either. It worked on a dell dimension 4400, but when it gets to the activate network my system freezes. Should i re-install my system, or should i post this under the hardware category.
View 9 Replies
View Related
Mar 9, 2010
In openSuse I can connect to a wireless network. It says that it is connected, and I can open the router page (http://192.168.1.1/basic.html). But I cannot load any other pages. Nothing else recognizes internet either; I tried using konqueror, YAST and wget with the command line, and none of them could load anything. It is not a router problem or a wireless card problem because both Ubuntu and Kubuntu can connect, from the same computer. I know this is odd because in the only other thread I could find with this issue, it was a different distro and installing openSuse seemed to fix it.
Hardware:
Computer: Yakumo Notebook model 331
Network Card: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)
View 5 Replies
View Related
Feb 26, 2011
I am currently facing a problem with rsync (or maybe ssh, I don't know yet). I have daily backups that are done via cron using rsync from my computer (client) to a NAS. And systematically during these backups my computer completely freezes (no remote login possible, nothing), so I have to hard reboot. As you might imagine, I cannot do this every day. In /var/log/messages there is just a line like that :
Feb 26 17:23:53 eggplant rsyslogd: -- MARK --
right before the hang. The rsync worked well before and I don't really know what changed in my system config. In /var/log/rsyncd.log I sometimes (but not every time) I get :
2011/02/26 16:39:19 [13229] rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at rsync.c(543) [Receiver=3.0.7]
I aldready update the default rsync from opensuse 11.3 to 3.0.7.7, but it does not help. How can I at least know what is going wrong? I am trying to track down the problem but don't know how to start. Last also a log of the rsync command (client) running ssh in verbose using the command "rsync -av --delete --timeout=180 -e "ssh -v -p xxxxxx -i /root/.ssh/rsync-key_eggplant" /mds root@xxxxxxxx:/volume1/autoBackup/eggplant":
OpenSSH_5.4p1, OpenSSL 1.0.0 29 Mar 2010
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
[code]....
View 9 Replies
View Related
Jun 10, 2011
Recently, I decided to migrate from SuSE 11.2 to 11.4. My 11.2 installation was working fine with two VLANs and several VMs. I went the route of installing 11.4 from scratch rather than upgrading 11.2.
The installation went smoothly. Afterwards, I ran Yast and changed eth0 to a bonding interface. Then I added two VLANs that used the bonding interface. When I restarted the computer, I saw the following on the console: "Waiting for mandatory devices vlan3005 __NSC__". Then after a 30 second countdown:
"vlan3005 no interface found". The solution to that problem was to add "ETHERDEVICE='eth0'" to /etc/sysconfig/network/ifcfg-eth0.3005". Upon restarting the computer, I could see that DHCP started this time but didn't get an IP address and continued in the background while the rest of the console messages scrolled by. At the point where X kicks in and I should have gotten a GUI login window, the screen goes dark. I cannot get to a console (CTRL-ALT-F1 or F2) or any other GUI login window (CTRL-ALT-F7 F8 or F9).
The computer was completely unresponsive. I could not ssh in to it from another host nor could I ping it. I let it sit for a few minutes but nothing ever appeared on the console. There were no blinking lights on the keyboard. I had to power the computer off. I turned off VLAN trunking on the switch port and the computer booted up fine, without network access, of course. I checked the logs but could find no clues as to what happened. I suspect a kernel problem. However, before I proceed further, I thought I would post my problem here and see if anyone has had a similar problem and perhaps a solution.
View 4 Replies
View Related
Nov 27, 2009
ive got a Ubuntu v9 and i wanna get my internet to work on it, ive looked all over the place but i cant find a driver for:
linksys wireless-G USB network adaptor
model number:WUSB54G version: 4
View 4 Replies
View Related
Jun 20, 2009
I'm having trouble getting my wifi devices to work on my 128bit WEP network. I have a new Thinkpad T400, with an internal Intel PRO/Wireless 5100 AGN. I also have some cardbus cards: a Lucent ORiNOCO Gold, a Linksys Wireless-G, and a TRENDnet TEW-421PC. I have them set up as interfaces eth2, eth1, and eth3. (The TRENDnet isn't recognised as a network card at all, so no interface for it.) I have installed the latest firmware for the Linksys card.
The /etc/sysconfig/network-scripts/ifcfg-* files are virtually identical for all of them, differing only in the HWADDR and DEVICE lines. So here's the behaviour:
1. The Lucent card comes up just fine.
2. The internal 5100AGN and the Linksys cards won't come up, and watching with iwconfig shows that they're either associated with my AP OR they've got an encryption key set -- but not both.
3. When trying to bring up the 5100AGN, I get the following messages:
iwlagn: index 0 not used in uCode key table
iwlagn: index 3 not used in uCode key table
/var/log/messages shows DHCPDISCOVER requests being sent, but they're bound to fail since the association with the AP with WEP isn't being completed. And yes, the ifcfg-* files really *are* identical except for the DEVICE and HWADDR lines. The /etc/udev/rules.d/70-persistent-net.rules file correctly maps the interfaces to the MAC addresses. So why does my antique ORiNOCO card work and thew newer ones fail? How can I track down what's being done wrong/not being done?
View 4 Replies
View Related
Jul 12, 2011
The usb device scans in Windows with a driver but i can't find a linux driver so i installed ndiswrapper.
ifconfig does not list the wlan0 device. iwconfig lists wlan0 YaST2 doesn't find any networks. Ethernet works just fine.
View 7 Replies
View Related
Jan 30, 2010
I read through the sticky of wireless card not working, and I followed through with the steps, with the exception of looking for firmware, because I'm certain it has it, being that the card works when I'm running Windows, and overall the system recognizes the device.
The only difference is, I notice that the activity light on the card itself does not turn on when running openSUSE. It recognizes the card, it even detects the network, but when I enter the WEP key and finish, it does nothing afterwards. Still no internet.
Card: Linksys WMP54G v4.1
View 5 Replies
View Related
Mar 13, 2010
I have a Linksys WPC300N v1 "Wireless-N Notebook Adapter" which uses the Broadcom 4329 chipset. Is there a way to troubleshoot and configure this card to use wl, b43, ssb? Preferrably via CLI. I have a couple years of CLI experience in Debian/derivatives (but only in my spare time ).
I have this card recognized and running adequately in Debian (and derivatives) using the 'wl' driver (sometimes supplied by debian.org, other times by broadcom.com). The one hint at a solution for this particular card/chipset I have found searching the OpenSUSE (SuSE for short?) forum points me to using ndiswrapper, which I've never used nor care to if it requires wine. I'm trying to ultimately connect to a b/g/n WPA-1 TKIP wlan.
lspci -v:
03:00.0 Network controller: Broadcom Corporation BCM43XG (rev 01)
Subsystem: Linksys Device 0058
Flags: fast devsel, IRQ 11
Memory at f4000000 (32-bit, non-prefetchable) [disabled] [size=16K]
lsmod | grep 'ssb' returns nothing (neither do 'b43' or 'wl') but 'pcmcia' returns:
pcmcia_core 41748 3 pcmcia,yenta_socket,rsrc_nonstatic
When configuring this card in Debian, I first plugged in the card which resulted in some hard disk activity but the LED was not lit. After installing the driver, the LED came on but no network. After configuring the network, it works 'adequately' (no roaming mode) using the wpa_supplicant package and is readily identified during init.
This is not mission critical by any means so I'm not in a hurry and willing to try almost anything. However, this is an old laptop so I'm even somewhat surprised that KDE4 is running as well as it is (KDE 3.5.10 runs quite well, which is more than I can say for the latest Gnome DE; xfce "screams" relatively). Dell Latitude C-610 PIII-M 1.2 GHz 512 KB cache 512 MB RAM (YaST2 reports this as a C-640 but this does not agree with the BIOS splash). The display is an ATI Radeon LY using the 'radeon' server (default). I don't do compositing here. ;-)
View 9 Replies
View Related
May 15, 2010
I have installed Fedora 12 OS which is using kernel 2.6.32.11-99.fc12.x86_64. I am using a Linksys WMP600N Wireless-N PCI Adapter with Dual Band card which has a Ralink chipset. I have installed the latest rt2860 driver which uses the 2.6.32.11-99.fc12.x86_64 kernel. If there is any other pieces of information that is need I can provide it.
Problem: I can use either the Ethernet connection which is built into my ABIT mother board or my PCI wireless card. My Ethernet connection works perfectly however; my wireless card comes up attaches to my wireless router; that's it. There is a strong signal, the WPA2 security password works correctly. I am able to ping my loop-back address and my DHCP IP address for my wireless card but I can not ping the router or anything outside of my box.
If I let the ping program run for a while and allow it to try to ping the router, after a period of time ~5minutes or so I will get several hits and then stop. The firewall does not change from my Ethernet connection to my wireless connection. The Wireless connection is a trusted interface in my firewall specifications. Questions/Thoughts:
Can I use the same OS provided routing table for my Ethernet connection for my wireless connection? Would the OS know which port to use by switching to a wireless connection (after reboot)? Do I need to somehow switch or bridge the port? Is the wpa_supplicant playing with my connection and opening it up and then shutting it down? Below are some netstat data: routing, interface table, statistics, and dmesg on the kernel driver rt2860.
[Code]....
View 1 Replies
View Related
Aug 8, 2010
I got the WMP300N installed by using ndiswrapper, but in Network Settings in YaST, I enter in all the info, and it will not connect. I set the Module Name as ndiswrapper, but it still won't connect. I blacklisted bcm43xx as some guide told me to. Could that be the problem?
View 2 Replies
View Related
Jun 19, 2010
I installed the Linksys WMP600N dual band card on my OpenSuSE 11.2 box using the SuSE supplied rt2860 driver. With the 2.4GHz channels this works out of the box. However, I am unable to access the 5GHz channels. iwlist says:
Leatherstocking:/home/bergue # iwlist wlan0 channel
wlan0 13 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Channel 12 : 2.467 GHz
Channel 13 : 2.472 GHz
Current Frequency:2.432 GHz (Channel 5)
Setting a 5GH channel with iwconfig doesn't work. iwpriv doesn't work either:
iwpriv wlan0 set WirelessMode=6
wlan0 no private ioctls.
Changing any settings in /etc/Wireless/RT2860STA/RT2860STA.dat doesn't seem to have any effect at all. The driver supplied by SuSE is of version 1.8. On the Ralink website a newer driver of version 2.3 is available; but so far I didn't manage to install it because I am not a C expert. However, the 5GHz channels should be accessible by the older 1.8 version driver. Somehow I suspect that in the SuSE distribution some dynamic parameters are hardcoded and therefore the whole thing fails.
View 3 Replies
View Related
Jan 18, 2011
After much tiddling'n'fiddling I finally got my new Linksys WUSB600N v2 working. Contrary to many posts, mine did NOT work with either the standard rt2870sta module, nor the updated version from the driver:wireless repo. Also the rt2870 version from the ralink website didn' t work. After a days worth of Googling I came across this post. The bottom line?
1. Download rt3572 from the Ralink website.
2. Add {USB_DEVICE(0x1737,0x0079)}, /* WUSB600N v2 */ to common/rtusb_dev_id.c
3. Follow README_STA
I did not install firmware packages. And be sure the rt2800sta module doesn' t get loaded. (you could just remove it, I suppose.)
View 9 Replies
View Related
Jul 11, 2011
I installed Suse 11.3 and it freezes randomly. No mouse control, keyboard. Sometimes the screen renders just the part of it, mostly top part of the screen and then freezes. I've gone through the /var/log/messages and I found this last line prior to restart (not sure if this is relevant) linux-fcvk kernel: [185.318403] [drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 1
View 5 Replies
View Related
Jun 8, 2010
my cisco wireless card model # wmp600n. Fedora doesn't even recognize that its there and i haven't been able to find any linux drivers for it, tried installing the driver using wine but still isnt working for me...
View 2 Replies
View Related
