Fedora :: Linksys:WL-N PCI With Dual-B.(WMP600N) Under FC10?
Dec 4, 2009
How to get the Linksys: Wireless-N PCI Adapter with Dual-Band (WMP600N) working under FC10 with WEP encryption and linking up to a 54Mb/s Network. Hardware : D945GCLF2 with Intel atom330, 2G memory. As I got to this in a roundabout way, I would recommend that you follow the following steps and see if somewhere along the line your wireless starts working.
1: Get the latest driver from Ralink: [URL] In my case 2009_0918_RT2860_Linux_STA_v2.2.0.0.tar.bz2 (the line starting with RT2860PCI) Unpack, read the README_STA file and follow the instructions. Do: make && make install After this I could only get a wireless connection by doing:
[Code]....
View 1 Replies
ADVERTISEMENT
Jan 17, 2010
/sbin/lspci reports this: 01:00.0 Network controller: RaLink RT2800 802.11n PCI iwconfig reports nothing Network manager doesn't see it. The card works when I run it from Win 7. I tried rt2800 and rt2860. no results I am fairly new to Linux and I don't know all of the command line functions, How to get my wireless PCI card detected. After I installed the rt2860 driver, I didn't reboot. After rebooting, the card lit up and now I am functional. Woo Hoo.
View 1 Replies
View Related
Feb 13, 2011
I tried out ubuntu and I was beyond impressed with this OS. I decided it was time to do a complete migration to ubuntu. I installed Ubuntu 10.10 on my HP laptop and everything went great. It detected all the drivers and my laptop is working in tip top shape. I decided to install ubuntu on a custom PC I recently bought (used for Java development), and that is when I started to run into problems. These are the specs on my custom pc:
[Code].....
I am using Ubuntu 10.10 64-bit edition on the system. First problem I am having is there is no audio on my system. For this card I'm using an HDMI cable to connect it to my screen. I installed the NVIDIA proprietary drivers and there was no audio. I reverted back to drivers I found on the NVIDIA website and still there is no audio. Second problem I am having is attributed to the wifi card I am using (I think). I keep getting this message on boot after post (and on the terminal after I switch off the X server by stopping gdm):
[Code].....
However, after the system boots I can connect to the internet.
View 1 Replies
View Related
Oct 28, 2010
i have just installed 10.10 under wubi, first time trying to use this network card under ubuntu. works fine on XP where it connects with good signal strength to a zyxel p-600 b/g router (my 3 other machines also connect fine to this router)
i am using WPA2, it takes 30secs to 1min to connect in the first place, then runs slowly and with intermittent disconnects, reports good signal strength in network manager.
i have been fortunate enough to have 3 machines that run ubuntu flawlessly out of the box..
View 1 Replies
View Related
Feb 13, 2010
I bought the wireless PCI network card WMP600N from Linksys. I tried to connect with my router, but no success. The correct driver is installed(RT2800), the necessary package WPA_supplement is also installed. My providers settings are WPA-PSK with a shared key. Key encryption is TKIP. I can't choose TKIP in the Yast network menu. so i chose passphrase.
the weird thing is that the wifimanager says WEP is on but it's not, at least not in my router and i did not setup WEP to. see picture 6. i had to use manual boot "ifup wlan0" because when i use boot at startup the whole systeem freezes. anyway, when i use ifup wlan0 as root in the konsole, the system also freezes. i have explained it clearly, please take a look a the pictures.
step1
step2
step3
step4 After pressing enter the system freezes.
View 9 Replies
View Related
Jun 20, 2009
I'm having trouble getting my wifi devices to work on my 128bit WEP network. I have a new Thinkpad T400, with an internal Intel PRO/Wireless 5100 AGN. I also have some cardbus cards: a Lucent ORiNOCO Gold, a Linksys Wireless-G, and a TRENDnet TEW-421PC. I have them set up as interfaces eth2, eth1, and eth3. (The TRENDnet isn't recognised as a network card at all, so no interface for it.) I have installed the latest firmware for the Linksys card.
The /etc/sysconfig/network-scripts/ifcfg-* files are virtually identical for all of them, differing only in the HWADDR and DEVICE lines. So here's the behaviour:
1. The Lucent card comes up just fine.
2. The internal 5100AGN and the Linksys cards won't come up, and watching with iwconfig shows that they're either associated with my AP OR they've got an encryption key set -- but not both.
3. When trying to bring up the 5100AGN, I get the following messages:
iwlagn: index 0 not used in uCode key table
iwlagn: index 3 not used in uCode key table
/var/log/messages shows DHCPDISCOVER requests being sent, but they're bound to fail since the association with the AP with WEP isn't being completed. And yes, the ifcfg-* files really *are* identical except for the DEVICE and HWADDR lines. The /etc/udev/rules.d/70-persistent-net.rules file correctly maps the interfaces to the MAC addresses. So why does my antique ORiNOCO card work and thew newer ones fail? How can I track down what's being done wrong/not being done?
View 4 Replies
View Related
Jan 24, 2011
I'm having some trouble connecting to the wireless network here at home. The PC has a Linksys WMP600N wireless network card, which works fine under several versions of Windows. In Opensuse however, I cannot get it to find the network. Even though my laptop is right next to it, which has perfect connection to the network. The router is a Linksys WRT610N.
I've tried running iwconfig and iwlist scan in the terminal, but the scan returns no results and iwconfig indicates it does not have a connection to a network. I've turned off IPv6 as I read this can sometimes cause issues. I've also tried issuing the computer a static IP address, figuring the DHCP might be causing problems, but all to no avail.
View 9 Replies
View Related
Mar 3, 2009
I installed fedora on my second hdd, the other one had xp before fedora, now in grub it shows xp as other and wont boot into it, just hangs there. SDC is an external drive and sdb is the xp drive as you can tell by the filesystem.
Disk /dev/sda: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x836db2c4 .....
View 1 Replies
View Related
Jan 25, 2009
I did a fresh install of Fedora Core 10 32bit on my Caompaq Presario AMD 64 laptop which originally only had Vista ultimate 64bit. When I go in to grub and choose windows I get a screen that says:
Windows failed to start...
File: windowssystem32winload.exe
Status: 0xc0000225
Info: The selected entry could not be loaded because the application is missing or corrupt.
View 9 Replies
View Related
Jun 1, 2009
I upgraded to FC10 from FC8 and my Gnome-panel no longer spans both screens in my dual monitor configuration. This worked fine in FC8, and I can't seem to figure out how to make this config work in FC10.
I've tried Xinerama and Twinview, and various configurations in xorg.conf, and cannot seem to make it happen.
How to make both my panels (top and bottom) go across both screens?
View 2 Replies
View Related
May 15, 2010
I have installed Fedora 12 OS which is using kernel 2.6.32.11-99.fc12.x86_64. I am using a Linksys WMP600N Wireless-N PCI Adapter with Dual Band card which has a Ralink chipset. I have installed the latest rt2860 driver which uses the 2.6.32.11-99.fc12.x86_64 kernel. If there is any other pieces of information that is need I can provide it.
Problem: I can use either the Ethernet connection which is built into my ABIT mother board or my PCI wireless card. My Ethernet connection works perfectly however; my wireless card comes up attaches to my wireless router; that's it. There is a strong signal, the WPA2 security password works correctly. I am able to ping my loop-back address and my DHCP IP address for my wireless card but I can not ping the router or anything outside of my box.
If I let the ping program run for a while and allow it to try to ping the router, after a period of time ~5minutes or so I will get several hits and then stop. The firewall does not change from my Ethernet connection to my wireless connection. The Wireless connection is a trusted interface in my firewall specifications. Questions/Thoughts:
Can I use the same OS provided routing table for my Ethernet connection for my wireless connection? Would the OS know which port to use by switching to a wireless connection (after reboot)? Do I need to somehow switch or bridge the port? Is the wpa_supplicant playing with my connection and opening it up and then shutting it down? Below are some netstat data: routing, interface table, statistics, and dmesg on the kernel driver rt2860.
[Code]....
View 1 Replies
View Related
Jun 8, 2010
my cisco wireless card model # wmp600n. Fedora doesn't even recognize that its there and i haven't been able to find any linux drivers for it, tried installing the driver using wine but still isnt working for me...
View 2 Replies
View Related
Jul 30, 2010
I'm not a new user to ubuntu but I'm stuck with a driver issue on a wireless adapter upgrade for ubuntu 10.04 lucid lynx. I'm running an acer aspire am1201-e1622a with amd athlon x2 64 bit processor, however i'm only running the 32 bit version of lucid lynx. The following are a few outputs of some commands that might assist in finding the proper driver. Before though i will tell you what i have done.
I have installed a few different drivers from windows wireless driver installer such as the xp and vista 32 and 64 bit versions with no success in the computer actually recognizing that i have a wireless adapter installed. The windows wireless driver installer said that hardware was present but i was unable to scan for networks or even see that i had a choice to do that. This meaning that it didn't show i had wireless capabilities in my network manager. i tested this with gnome network manager which is the default manager for 10.04 and also with wicd with no success.
Following these tests i attempted to install a driver from source following the instructions on another forum. This allowed me to manually turn on the wireless adapter but i was still unable to find any networks. This meaning that wicd was able to see that i had a wireless adapter installed but it for some reason was unable to see any wireless networks around. I'm 100% sure my router is in range and that it is configured correctly. I have 5 other computers connect to this router along with some of them being ubuntu.
[Code]....
View 2 Replies
View Related
Jun 20, 2010
I'm try to setup a wireless network with my linksys wireless router and my HP laptop dual booting Vista & Suse 11.2. I have the vista networked, just fine. Where I can share files and the printer connected to my desktop. But I want to be able to use Suse in the same way, full time and to stray away from Vista. My wife and kids like easy. So I'm trying to transform them and show them something new.
View 9 Replies
View Related
Apr 27, 2009
I'm trying to install a Linksys WUSB600n dual-band USB wireless-N adapter onto a desktop system with opensuse 11.1 installed; this system will be migrating to a back porch with no cabling access, hence the wireless solution. Everything works fine under Windows XP, but on Linux, not so much. Hardware info is as follows; there is no "Wireless LAN" entry, but there is a USB entry:
99: udi = '/org/freedesktop/Hal/devices/usb_device_1737_71_noserial'
info.subsystem = 'usb_device'
usb_device.vendor = 'Linksys'
usb_device.bus_number = 1 (0x1)
linux.subsystem = 'usb'
usb_device.product = 'Dual-Band Wireless-N USB Network Adapter'
info.product = 'Dual-Band Wireless-N USB Network Adapter'
[Code]........
View 9 Replies
View Related
Dec 10, 2009
How do I update from FC10 to Fedora 12 from the command line.
View 2 Replies
View Related
Jan 6, 2009
When trying to launch firefox after upgrading to FC10, I get:Couldn't load XPCOM
View 4 Replies
View Related
Mar 26, 2009
just as the title states i need to upgrade my os from fc4 to fc10 first let me say i have no physical access to the box. all i have is root ssh access to it. So i need to know the best way of upgrading that will be safe. before i do the upgrade the server will be backed up so i will not loose any files. if the upgrade fails the data center will reload the os with what i need on it. but i would rather not have to format.
View 6 Replies
View Related
Jun 13, 2009
After upgrading to F11 I have had a few problems with some applications most like miro I was able to fix by using yum remove and then reinstalling. It appears that after updating some applications have stayed with the fc10 versions despite fc11 versions being available.
yum list | grep fc10 | grep installed
anthy.i386 9100h-4.fc10 installed
compat-db45.i386 4.5.20-5.fc10 installed
cronie.i386 1.2-8.fc10 installed
[code]...
View 14 Replies
View Related
Aug 6, 2009
I did the yum preupgrade install, all went well, did preupgrade -gui ; did everything fine, then i got the REBOOT now to start updating, clicked and i have just
View 5 Replies
View Related
Oct 12, 2009
I recently update FC10 to FC11 and Yum has stopped working. Also, "Add/Remove Software" has no packages listed. And, I have no Software repositories listed. When I try to run Yum I get the following:
There was a problem importing one of the Python modules required to run yum. The error leading to this problem was:
[Code]...
View 1 Replies
View Related
Feb 4, 2010
I'm about ready to give up! The modem is a USR5610C it has an rpm file. I guess I'll also need to know if I'm starting it correctly, by restarting the machine.
View 1 Replies
View Related
Feb 4, 2010
how do install mplayer on fc10?
View 7 Replies
View Related
May 5, 2010
Is anyone having problems since they updated? My card was working fine before I updated. Now it detects all the networks, including mine. However, when it tries to connect it sits there for ~2 minutes, then says it's disconnected. I've checked my security settings and they are fine.
View 2 Replies
View Related
Jan 27, 2009
I want to backup my apache website using tar. I want to make sure all the permissions and such stay the same so that if I restore a website, it's ready to go exactly as it had been.I am using the following command and would like to know if there is anything else I should neeed to do?
tar --xattrs cvzf backup.tgz /path-to-webserver-files
Now my other question is since tar doesn't store absolute paths, when I run the restore I have to be in the root directory? In another words if I run the command in a user directory will tar do something retarded like encode the paths as ../path-to-webserver or will it just be path-to-webserver so that when I run the restore from the / folder it will automatically go into the right place?
View 4 Replies
View Related
Feb 4, 2009
So my server running FC4 died last night and I decided to go ahead with the long-awaited upgrade to FC10 while I was rebuilding my server. I use my server for a number of things including, but not limited to: router, firewall, web server, mail server... I have a typical configuration process that I have followed since before fedora, and it has worked well for me up through FC4, but my usual config process doesn't work on FC10.
First of all, I don't want SELinux running, I didn't see an option to not install it during the FC10 setup, so how to I properly disable or uninstall it afterwards? Second, I was unable to even configure the server to route traffic from my internal network to the web, here's the process I usually go through for this:
[Code]...
I don't have a static IP from my ISP, so I'm not quite sure how to add the default route. I think I need to do something like "route add default gw xxx.xxx.xxx.xxx eth1" where eth1 is my external NIC, correct?
What else do I need to do to route traffic? I noticed that I wasn't even able to ping my server from the internal network even though they are on the same subnet, my server's internal NIC has an address of 192.168.7.1 and my computer on the network has an address of 192.168.7.2. If I can get this going to I have internet access again at the very least, I can move forward with the web server, email, etc.
View 8 Replies
View Related
Feb 6, 2009
I'm currently running FC9 and I have no problem with my network connection. Now I just installed FC10 on another partition too try it out, but I don't seem to get it work. I disabled the NetworkManager (like in FC9) and enabled the Network. I'm using static IP, when in go in Network Configuration/Ethernet Device/General, the subnet mask is always taking the address of the Default gateway address when I press OK.
my subnet mask is 255.255.255.0, and my gateway is 192.168.1.1, but after I press ok they both go back to 192.168.1.1
View 3 Replies
View Related
Mar 21, 2009
I and my friend use FC10 on our laptops. We want to share our data by creating a wired network between our machines because a wireless router is something what our pockets can't afford. What should I do for it? What type of wires and stuffs do I need? I Googled for some link for doing so in FC10 but couldn't find.
View 6 Replies
View Related
Mar 30, 2009
I was forced to reinstall fc10 a couple of days back and from them the bootingup is really slow(takes more then 1 minute to show login screen). before the reinstall, it was quite fast. i dont know what went wrong.
[Code]....
View 2 Replies
View Related
Apr 16, 2009
I recently setup a file sharing server with FC10 running Samba...
I got it running perfectly and it ran great for a few weeks. I was working on the machine today and tried to reboot it and noticed that it was stuck on FC10's new boot screen. I pressed the esc key and saw that the boot process was stuck on the smb service...
I don't get any errors and the machine doesn't freeze up or anything, it just hangs on the smb service and won't continue with the boot...
Is there anyway that I can get the system to skip the smb service so that I can get into the system? I don't know what's changed or what's causing this sudden hang in the system at boot.
I tried the ubuntu live CD to attempt to go in and edit the /etc/rc5.d scripts to try and skip the smb service start but I am not sure where to look for it...
View 4 Replies
View Related
