OpenSUSE Network :: FCoE (Fibre Channel Over Ethernet) Installation

Jul 27, 2010

I'm new to this environment. I'm currently using OpenSuse 11.2 freshly installed. I'm attempting to install FCoE as a target on one box and an initiator on another. I've gone to the Open-FCoE.org site and got the tar file open-fcoe-2.6.34.tar.gz and attempted to install it, but there appear to be missing dependencies, such as libhbalinux. However, the more I seem to install, the more there are unresolved dependancies. I've followed the Open_FCoE Target and Iniator Quick Starts, but I'm running into many missing souce dependencies. What exactly I need in the way of packages, files, etc and how to install them? Is there any documentation of how to install FCoE from scratch?

View 2 Replies


ADVERTISEMENT

General :: Fibre Channel - QLogic Corp - QLA2300

Apr 10, 2011

My system is an Altix3000 running: (Linux sgialtix 2.4.21-sgi304r1 #1 SMP Sat Jan 29 22:43:29 PST 2005 ia64 ia64 ia64 GNU/Linux) (redhat-release=redhat-release-3AS-8.3). Which command do I use to list World Wide Name information of the QLA2300 HBA? I tried /proc/scsi and /proc/xscsi but I found nothing there.

View 2 Replies View Related

Red Hat :: Disable One Of The TWO Fibre Channel HBA Adapter On Redaht 5.3 Server?

Feb 10, 2011

A single LUN is attached to my server with rhel5.3. The server has two Fibre channel adapters. I need to turn off one of the FC interface manuly. Which command should i use to turnoff(disable) the adapter. The settinga are the following:

#multipath -ll
test-lun (36005076801900139b800000000000150) dm-14 IBM,2145
[size=10G][features=1 queue_if_no_path][hwhandler=0][rw]
\_ round-robin 0 [prio=100][enabled]
\_ 2:0:11:3 sdc 8:32 [active][ready]
\_ 4:0:13:3 sdi 8:128 [active][ready]
\_ round-robin 0 [prio=20][enabled]
\_ 2:0:12:3 sde 8:64 [active][ready]
\_ 4:0:12:3 sdg 8:96 [active][ready]
[Code]......

View 2 Replies View Related

CentOS 5 Hardware :: Fibre Channel Port Type Configuration?

Jul 31, 2010

SAN admin needs me to change the host port_type from an NLPort to an FPort,is[/sys /class /fc_host/host1/port_type] however i can not find anywhere to change this.the driver in question is Fusion MPT.

View 2 Replies View Related

Debian Hardware :: Fibre-Channel RAID Not Showing, Wrong Setup?

Jun 8, 2011

I've been running Debian for a while, and now have the chance to do some enterprise-level experimentation. I stumbled across a very cheap EMC Clariion CX300 fibre RAID unit on eBay with 10 disks (£90!), so I snapped it up with a fibre HBA. It's not a SAN, technically a DAS in its current configuration. I'd like to know how hard it is to set up one of these as an actual disk device in Debian.I tried installing the HBA (an Agilent Tachyon XL2 PCI-X card, 32 and 64-bit modes) in my current 'live' server (a Celeron 1.2GHz-based machine), but while Debian detected it as a FC controller card, mapping the LUNs within Navisphere on the CX to the host caused nothing (obvious) to show up in the OS. From what I've read about setting up SANs (not DASs, there seems to be precious little info on setting up these), there's firmware involved with the card, and there are no references to getting a Tachyon running under Linux.

I also snagged a good deal on a PowerEdge 1850 server, but as it's the PCI-Express version, the Tachyon won't fit, so I'm considering buying a PCI-E HBA. I found a QLogic QLE2460 for a good price, but I'm hesitant to buy it, in case I still can't get Debian to see the disks. I'd most like to have the device connected to the PowerEdge instead of the Celeron machine. Have I missed a step in the configuration, or is there anything I can do to test if the system is working as it should be? The units we use at work are much simpler: set the RAIDs up, map the host LUNs and the disk shows up in Windows. I'm also sure I've set everything up correctly on the CX, as the same LUN is available to Windows. Just need to get Debian to see something on the end of the HBA!System Specs:Live Server: Celeron 1.2GHz, 512MB RAM, Intel D815EEA2 board, SATA soft-RAID hard drives, PCI Gb Ethernet and USB2.0, Agilent Tachyon XL2 PCI-X FC HBA, Debian 6.0.1PowerEdge 1850: 2x 3.2GHz Xeons, 6GB RAM, SCSI RAID disks, PCI-E riser, planned QLogic QLE2460 PCI-E HBARAID Unit: EMC Clariion CX300, 10x 146GB FC disks, 2Gbps Fibre-channel interfaceThe PowerEdge is the planned replacement for the Celeron machine, which started life as my experimentation box and became my personal live server. Storage is holding it back, so I'd love to add a further five disks to the CX and have nearly 2TB of RAID-protected storage.

View 1 Replies View Related

SUSE / Novell :: Fails To Boot From QLogic Fibre Channel Card - No Root Device Found

Oct 31, 2010

We have a SuSE/SLES 9 server that boots from a fibre channel card, using volumes from a NetApp filer.

We previously had the server booting from the LUNs on the filer, but after some tinkering around with the fibre channel BIOS, we have the situation where the LUNS seem to be mounted, the OS boots, starts to initialise everything but then stalls, saying:

We have tried loads of combinations of settings in the BIOS and fibre channel BIOS without any success or any idea what may have caused the error.

View 4 Replies View Related

Hardware :: Replace Fibre Channel Switch In CentOS5.3 (cluster) For Regular Switch / Hub?

Jul 28, 2009

Can the fibre channel switch in the centOS5.3 cluster edition be switched for a regular router or hub?
If so how would one do this? If not why does the switch have to be fibre channel?

View 1 Replies View Related

Ubuntu :: Get A Dell M610 Running 9.1 64bit To Talk To A Dell EMC Fibre Channel Array

Jan 22, 2010

I find myself in unfamiliar territory. I am attempting to get a Dell M610 (in an M100e) running Ubuntu 9.1 64bit to talk to a Dell EMC Fibre Channel Array. The Dell has an Emulex card in it and it appears that the driver is loaded OK. What I am not sure on is what to do next! I have the SAN end configured but how do I get my LUN mounted on Ubuntu ?

View 1 Replies View Related

OpenSUSE Network :: Rdpx11 Channel Not Present?

Mar 3, 2009

when I try logging on to my OpenSuse 11.1 Server.I get this error:rdpx11 channel not present

View 4 Replies View Related

OpenSUSE Network :: Create Network Bridge / Device Hooked Up Via Ethernet Had No Internet Connectivity?

Feb 25, 2011

I'm on opensuse 11.4 (11.3 won't work with my monitor).

My computer gets internet through wireless and I want to share that internet through its ethernet port. So far I've tried using Knetworkmanager to create a network bridge between my wireless and wired connections. I created a new wired connection and shared it using the ip address settings. I was able to get both connections active, but the device hooked up via ethernet had no internet connectivity.

I also tried this command:
echo 1 > /proc/sys/net/ipv4/ip_forward

but another test resulted in the same fashion (no internet on wired). I believe anything I add to /proc should have an immediate effect, correct?

View 9 Replies View Related

OpenSUSE Network :: Keep WiFi Internet While A PC-to-PC Ethernet Network Is Active?

Jan 31, 2011

I often use an Ethernet cable to connect my computer to another computer for various purposes. But when I do that, I cannot use the internet even though I'm still connected to a WiFi access point. I'm presuming that's because openSUSE is trying to reach the internet through the Ethernet cable, which has precedence over WiFi.Is there a way to enable internet usage via WiFi while I'm connected to another computer over Ethernet?

View 9 Replies View Related

OpenSUSE Network :: Ethernet Not Found?

Jul 5, 2010

I have just switched over from Ubuntu. My PC with Ubuntu connected to the ethernet fine, but now the internet is not found at all. Can someone tell me what sort of things I need to do to get my internet up?

View 2 Replies View Related

OpenSUSE Network :: Ethernet Connection Not Working?

Mar 6, 2010

I was trying to activate my wireless connection .... in turn did something that triggered eth0 no-carrier when "ifstatus eth0"

View 2 Replies View Related

OpenSUSE Network :: Can't Setup Ethernet Connection

Jul 24, 2010

Today I switched from Ubuntu to OpenSuse. But I can't setup my Ethernet connection.I have 2 PCs connected with a crossover cable, one with Ubuntu, the other with OpenSuse 11.3. Lights are on in both NICs.

View 9 Replies View Related

OpenSUSE Network :: Ethernet Is Not Working - Need Configuration

Aug 12, 2010

I am using Sony vaio E series laptop. Previously, I was using my E63 nokia phone as modem for internet connection and i have installed K-internet in my Opensuse OS, and configured wvdial.conf as follows:

[Dialer Defaults]
Init1=ATZ
Init2=ATQ V1 E1 S0=0 &C1 &D2 + FCLASS=0
Init3=AT + CGDCONT=1, "IP","bsnlnet","",0,0
Baud=4608000
Modem Type= Analog Modem
[Code]....

But now, I have Reliance Brodband Connection through LAN. when I am Pluggin in my LAN cable in my laptop YAST Network Configuration Showing Marvell Ethrtnrt is not Configured, When i am going to configured that part it's showning me no Enther net present or Configured By ny Hardware Is detecting ethernet. So, I have concluded that it might be the problem with my wvdial.conf. Also, additional information are as follows:- S- Open suse 64bit, Version- 11.2, cause I cannot Connect to my Internet now? What should I do to have this Problem Fixed?

View 3 Replies View Related

OpenSUSE Network :: Can't Set Up Ethernet Connection With Windows XP

Jan 26, 2011

I've connected my openSUSE laptop with a Windows XP computer using an Ethernet cable that supports two-way traffic.

LAN settings on Windows XP
IP address: 192.168.5.1
Netmask: 255.255.255.0
Gateway and first DNS server: 192.168.5.2
LAN settings on openSUSE

View 6 Replies View Related

OpenSUSE Network :: Using WiFi And Ethernet Connections

Feb 5, 2011

I've been searching for a couple of hours and have not found any threads that solve my situation... hope I'm not repeating something here.

Setup: Notebook with openSUSE 11.2 using KDE 4. Using Network Manager to manage network connection (although I've tried configuring this using ifup as well with no luck).

I need to be able to connect to client networks via a network cable (Ethernet) and connect to the internet via my MiFi 2200 Mobile WiFi. Both cards/connections are active with the following:

I have no problem mounting drives from the client's network. But, can not reach the internet. If I disconnect the ethernet cable, the browser will immediately connect to the internet and load web pages.

I'm assuming the ethernet connection is taking precedence over the wireless connection?

I can't imagine that there is not a way to set this up. If Windows can do it, I'm sure openSUSE can!

View 9 Replies View Related

OpenSUSE Network :: Ethernet Not Working After Upgrade To 11.4?

Jun 12, 2011

system:
destop
openSUSE 11.4 KDE
single wired network connection
running as a headless server
upgrade from 11.1

Problem: I had a bunch network services running under 11.1 with KDE. Now after upgrade to 11.4 full network functionality is broken. I was using ifup but now is broken. Between ifup and NetworkManager I can demonstrate the full required range of functionality but not all at the same time (the union of functionality of each provides the full required functionality, but not individually). WOL does work in all cases.

With 'ifup', it seems that everything is 'working' as before, but services are broken when accessed from outside. eth0 up and fuctioning with statically assigned IP. Outgoing connections seem to work - I can browse the web. But trying to access services from outside is broken. VNC is rejected. Connecting to SMB shares reports login error. TFTP doesn't respond. SSH connection is rejected.

Although sometimes it will get in a state that everything except VNC works (connects but then is dropped upon login with "Error while waiting for server message") but I can't consistently reproduce this state other than it seems to happen after some extended period of time.

I have verified the firewall is off and apparmour is off.

On the other hand, everything works with 'NetManager' (both KDE and Plasmoid) with no other changes. The problem here is that it does not seem possible to set a static IP address - eth0 doesn't show up in the list of wired interfaces to be able to select and edit. That's problem 1 - I need a static IP. (I suppose I could reserve an address at the DHCP server, but a static IP works 100% to get the right address). The other problem is that neither NetManager starts at boot and only start _after_ login at the console - that won't work as I never log in at the console. (I suppose I could set it up to login automatically into a console or something but I would rather not)

View 9 Replies View Related

OpenSUSE Network :: Can't Detect BCM5751M Ethernet Card In IBM T43

Jun 21, 2009

I installed the OpenSUSE 11 on my IBM T43 laptop. After installation finish I found the Yast can't detect the integrated ethernet cardBroadcomCorporationNetXtremeBCM5751MGigabitEthernet PCI Express(rev 11).

View 5 Replies View Related

OpenSUSE Network :: Enable Ethernet At Startup With NetworkManager?

Jan 6, 2010

How can I enable the network with Networkmanager WIHTOUT logging in in OpenSuse 11.2?
If I define a connection for ethernet the System connection is greyed out. I want to use Networkmanager because I have also wireless connections...

View 9 Replies View Related

OpenSUSE Network :: Internet By WiFi While Using Ethernet Cable ?

Jul 27, 2010

My WiFi can connect to internet without any problem, until I plug my ethernet cable ...then I lose internet.

So the question is : how do I configure my ip/dns and stuff to still have internet when I'm plugged by cable at the same time! it was working on windows ;-)

View 3 Replies View Related

OpenSUSE Network :: No Ethernet Device After Installing Updates?

May 26, 2011

I'm currently using SuSE 11.4 and after running the full online updates and restarting the machine as YAST suggested, I no longer have eth0/eth1 available.

I'm clueless about what to do since I'm kinda new to Linux and at the moment, I'm trying out all the distros before making a full commitment to anyone. So far, Ubuntu has been trouble-free from day one, but I'm willing to give this distro (opensuse) some slack.

View 9 Replies View Related

OpenSUSE Network :: Ethernet Card Missing After Upgrade?

Jul 1, 2011

I have a strange problem. An old PC is my home server. On the PC I had in the long past 2 NICs. For the last year or so, I had only one NIC installed, a Compex with 8139too module which run just fine. After the upgrade to 11.4, 32bit of course, with zypper dup, I saw that I had no internet and no network connection to the server. So, I logged on the server and found that rcnetwork could not start the eth0 and eth3(!). OK, a mistake I thought. Enter Yast and solve it. Unfortunately, yast reports 2 cards! I removed all of them, rebooted but nothing. lspci reports 2 cards, while I have NONE installed on the motherboard!hwinfo --netcard the same! yast the same! So, the OS "knows" that I have 2 NICs, while I definitely have none!

Checked if /etc/udev/rules.d/70- had any left data from the past, but the file was empty. Checked the /etc/sysconfig/network/scripts nothing again.In principle, the openSUSE 11.4 believes that I have 2 cards (and with wrong MACs, obviously) and I cannot make it rescan the PCI bus to find that I have nothing! I am sure that some garbages are left somewhere but I don't know where to look at. it is very critical to have that server but on-line and in my LAN.

View 9 Replies View Related

OpenSUSE Network :: 11.3 - No Ethernet After Sleep (Suspend To RAM) - Cannot Allocate Memory

Oct 17, 2010

After updating to openSUSE 11.3, and restarting my computer, I placed my computer in sleep(suspend to RAM) mode, and I lost my internet connectivity. I noticed that my computer was only connected through ethernet. After entering "dhclient eth0" in a terminal, I received the following output.

Code:

RTNETLINK answers: Cannot allocate memory

This is the first time that I have had issues with connecting to the Internet using Ethernet.

View 6 Replies View Related

OpenSUSE Network :: Dynex Ethernet Card Not Working Correctly?

Nov 27, 2010

I have a hp zd 7000, i really like this laptop, the onboard ethernet will not work at all. i purchased a dynex wired ethernet pcmcia card to get on the internet with. i have had no luck getting on the internet with it it will light up so i am getting power but no transmitting light works at all i have three net work cards listed in the system. one is the wireless. and the other two are the wired eth0 is the onboard and eth2 is the dynex what can i do next to determine the problem i do not use the wireless at all.

View 1 Replies View Related

OpenSUSE Network :: Computer With Two Ethernet Ports Share Internet?

Apr 9, 2011

I have a Opensuse 11.4 workstation that has two ethernet ports and I was wondering if there is the chance to use the other ethernet port as a switch to a Mac/PC?

View 2 Replies View Related

OpenSUSE Install :: 10.3 Network - Configure Ethernet Connection Or Wireless Card

Oct 2, 2010

I installed 10.3 (after buying it a couple of years ago and letting sit on the shelf) and can't get it to configure my ethernet connection or my wireless card. Yast doesn't include a list of available cards, and the error I get in installation-network setup is that the kernel isn't present. The machine I'm installing this on is a Lenovo, in which there isn't a discrete ethernet card (it's in the motherboard), but my wireless card (a Cisco LINKSYS 802.11G) is a discrete card. Because I'm divorcing Microsoft for a number of valid reasons, I don't have Windows available on that box.

View 4 Replies View Related

OpenSUSE Network :: Ethernet Card Wasn't Working - System Freezes

Dec 27, 2009

i have installed openSUSE 11.2 on a dell dimension 2400. My Ethernet card wasn't working, so i am using a wireless interface, but it doesn't work either. It worked on a dell dimension 4400, but when it gets to the activate network my system freezes. Should i re-install my system, or should i post this under the hardware category.

View 9 Replies View Related

OpenSUSE Network :: Mounting An Ext3 Partition That's On Another Computer Connected Via Ethernet?

Apr 8, 2010

What must be done to mount an ext3 partition that's on another computer which is connected via utp crossover cable? I can't seem to figure this one out, though I've read somewhere that it can be done, and I'd like to know how.

View 2 Replies View Related

OpenSUSE Network :: KNetwork Manager And Ethernet Port Disabled - Can't Connect

Oct 28, 2010

I did a fresh install of OpenSuSE 11.3 KDE 64-bit on my new laptop. Worked like a charm. But I brought it with me to work without connecting it to a wi-fi and now the network manager doesn't want to start when I'm back in range of my home connection. Also, whenever I try to launch KNetworkManager, it won't load up a window and I still can't connect. This is even disabling the Ethernet port also.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved