OpenSUSE Network :: 11.3 - No Ethernet After Sleep (Suspend To RAM) - Cannot Allocate Memory
Oct 17, 2010
After updating to openSUSE 11.3, and restarting my computer, I placed my computer in sleep(suspend to RAM) mode, and I lost my internet connectivity. I noticed that my computer was only connected through ethernet. After entering "dhclient eth0" in a terminal, I received the following output.
Code:
RTNETLINK answers: Cannot allocate memory
This is the first time that I have had issues with connecting to the Internet using Ethernet.
View 6 Replies
ADVERTISEMENT
Apr 17, 2011
I have openSUSE 11.4 KDE (upgraded to Tumbleweed but that's not relevant here). The computer is a Dell Optiplex. My sleep (suspend to ram) and wake (restore from ram) work very well. The box can multiboot to windows 7 as well as to Linux.
In Linux, the restore process is triggered by pressing the power button on the front of the case. No other action will bring it awake.
In windows, the restore process is triggered by the power button but also by moving the mouse or touching the Escape key, spacebar etc.
Here's the question: how do I get the computer to wake in Linux by activating a key (or mouse, whatever) instead of just the power button (which is under the desk and hard to get to)?
View 9 Replies
View Related
Jun 9, 2011
I just switched over to openSUSE about a week ago from Ubuntu and I just purchased an Asus N13 PCI-E wireless network adapter which uses an RALink 2860 chipset. I plugged it in and openSUSE was able to detect it and everything but when I went to go configure it using YaST, it wouldn't be able to scan for networks.
So, I reinstalled my old adapter, downloaded the latest source from RALink and compiled the drivers. When I tried to use insmod on the new .ko that was compiled, I got the "Could not allocate memory" error.
If you need dmsg logs or anything else, I can reinstall the card and get those.
View 4 Replies
View Related
Jan 20, 2010
On my windows console, i have installed sun virtualbox. I only have 768MB ram and so i downloaded a trial version of eboostr. I thought it would work, but when i tried an install of 11.2, also, i tried a debian install, it did the same thing, it froze up in the middle of the install with the error Code: unable to allocate and lock memory. I guess that eboostr doesn't work, but is there a way to use a flash drive as ram in virtual box?
View 5 Replies
View Related
May 26, 2010
Firstly, wol works fine from shutdown and hibernate; it's just suspend which doesn't work.
I've got 2 types of workstations, all running 11.1. They both have this kernel:
2.6.27.45-0.1-default #1 SMP 2010-02-22 16:49:47 +0100 x86_64 x86_64 x86_64 GNU/Linux
Type 1 is a dell optiplex 745, bios version 2.4.1. Here's the relevant bit from lspci:
03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5754 Gigabit Ethernet PCI Express (rev 02)
Kernel driver in use: tg3
Kernel modules: tg3
[Code]....
The fact that it's happening across two different machines makes me wonder if it is some OS setting I've missed, but then maybe neither card/driver supports it from suspend.
I'd really like to get them waking from suspend because training users to use suspend rather than hibernate would be a pain. Also, being able to configure such that it only wakes from suspend and not hibernate/shutdown, as implied in the bios, would allow me to wake machines up for backups etc only when the users are here, rather than on holiday/seconded to another department etc.
View 1 Replies
View Related
Apr 19, 2010
I get this error when I run "sudo apt-get install python-software-properties"
Preconfiguring packages ...
dpkg: unrecoverable fatal error, aborting:
fork failed: Cannot allocate memory
E: Sub-process /usr/bin/dpkg returned an error code (2)
I'm trying to install deluge via ssh and my vps has 512mb ram and is only using 11% of it prior to running the code.
View 2 Replies
View Related
May 16, 2010
i just recently installed ubuntu 10.04 onto my laptop. its running as a dual boot. i only allocated about 10gb of memory and have already run out. is it possible to allocate more memory afterwards
and another bug that i am having is my shift key is not functioning properly. if anyone happens to know this issue too. so i can't do exclamations of periods, capitalizations, etc... how would you remap your keyboard
View 7 Replies
View Related
Feb 22, 2011
I have mounter ubuntu karmic 9.10 on a XP sp3 using vmware,i wanted to move some files through share.everything went well for 2 hours then i keep getting Cannot allocate memory.
View 2 Replies
View Related
May 4, 2011
I'm running a quite complex model, and it's taking me around a week to complete the run, and one of my colleagues says that he can run it in one-two days. After looking to several forums to know how does it work, I've seen how the memory is used (using the command ps -A --sort -rss -o comm,pme), and the model run just takes 0,3% of the memory. I bought a 4 cores and 8gb of RAM laptop to be able to run the model fast, but I don't know how to allocate the use of the memory to concentrate it in developing that task. Is that possible?
View 2 Replies
View Related
May 3, 2011
when I try to execute busybox on Redhat Linux 4 I am getting the following error. Any idea why ?
View 1 Replies
View Related
Nov 24, 2010
I am running BWA (burrow-wheeler alignment) and, keep getting an error that there isn't enough memory allocated. How do I change the memory allocation? I'm working on a good quality desktop only a little over a year old, so having the memory shouldn't be the problem.
View 9 Replies
View Related
Jun 20, 2011
On SunOS 10 get an error when starting a large Java process with over 2Gb memory.
View 4 Replies
View Related
Oct 6, 2010
Can anyone tell me is there a way to add more than 2GB memory application in a 32 bit server? I found on many threads that it is not possible to set memory limit of a particular application to more than 2GB. I am using Fedora release 8 and trying to add more than 2GB memory to tomcat. If I modify the variable CATALINA_OPTS in /opt/bobcat/bin/catalina.sh (Startup script of tomcat) and add a value greater than 2GB for memory, tomcat wont start.Is there any work around / Kernel Patches available? Suggestions??
View 10 Replies
View Related
Oct 24, 2010
This is a clean install of Debian Lenny, using KDE3.5.10 desktopHave followed these instructions:http://wiki.debian.org/ATIProprietary
Using kernel 2.6.26-2-686, I think the fglrx module has been built correctly.
orac:~# modinfo fglrx
filename: /lib/modules/2.6.26-2-686/nonfree/fglrx/fglrx.ko
[code]....
View 2 Replies
View Related
Jan 3, 2011
I went to an interview last week and there was this guy who asked a simple question that i have been trying to solve for a couple of days. I tried google but i just cant get the search keywords right. The result were just useless. Well, the question is : "How can we allocate a limited memory to a process before we start its execution" well, the question is related to an X11 system so may be some flags must be set to limit its memory.
View 9 Replies
View Related
May 7, 2011
I am developing a code where I need to store the planes of an object in a tree & also i need to store it in a list for further processing ... when I try to allocate using malloc the memory allocation when i checked this in internet , I came to know that it may because the memory that I am trying to allocate may be more than the size_t variable.
View 9 Replies
View Related
Feb 6, 2011
While Apache is off, then everything is OK, but if I start apache server after some time I get messages "Unable to fork: Cannot allocate memory" when trying to do some commands with ssh(dir,rm,top and so on).
P.S. There is free RAM when I get that message.
View 2 Replies
View Related
Jan 21, 2011
My mail server stopped working this weekend, when I got in today I restarted and all the emails came through. The panic_log shows: daemon: accept process fork failed: Cannot allocate memory several times over the course of a few minutes. Can anyone give me advice on troubleshooting this one?
View 1 Replies
View Related
Jul 2, 2011
I am writing a function(in C language in Linux) to initialize an array of a structure from a mysql table by calling a function by reference but I have a problem with call this function by reference . this is my program:PHP Code:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
[code]...
View 4 Replies
View Related
Jan 7, 2010
I have a vector that I do not want to call new on during operation so I use the Capacity Feature to allocate all memory at beginning of program
Code:
struct chartype
{
public:
unsigned char value[MAXCHARTYPE_SIZE];
};
[Code].....
View 2 Replies
View Related
Mar 15, 2010
kubuntu 9.10, KDE 4.4.1, Nvidia driver 195
jeff@jeff-lappy:~$ sudo hibernate hibernate:Warning: Tuxonice binary signature file not found. Some modules failed to unload: nvidia hibernate: Aborting suspend due to errors in ModulesUnloadBlacklist (use --force to override).
I even installed this tuxonice thing but to no avail...
View 2 Replies
View Related
Apr 11, 2011
I have a HP laptop with an internal tv-tuner card, which i use once in a while, because i don't have a tv. The problem is, that the kernel module i installed to make this piece of hardware work, for some reason makes my laptop unable to sleep. So if i want to suspend my pc, i have to first unload the module, using
[code]...
View 10 Replies
View Related
Mar 11, 2011
Is it possible to disable hibernate, sleep and suspend in Ubuntu 10.10? I have found none of these to work properly on my PC.
View 3 Replies
View Related
Apr 3, 2010
I have been working on this problem for a few month. By messing with windows registry and local security policies I was able to remotely shut down windows from Linux by issuing:
Code:
net rpc SHUTDOWN -C "comments" -f -I xxx.xxx.xxx.xxx -U username%password
But now I am wondering how to force windows into sleep or suspend remotely from Linux.
It seems that there is no "net rpc SUSPEND" or "net rpc STANDBY" option available.
how to perform such remote operation?
View 2 Replies
View Related
Aug 10, 2010
My webcam LED turns on whenever my Asus P50IJ laptop wakes up from sleep or suspend, and subsequently will not turn off. I can't tell if my webcam is actually activated or not, and furthermore the light beams right into my eyes and makes my lappy not so usable.
If someone knows why this might be happening or could possibly help me fix it that would be very much appreciated. I'm really trying hard to stick with Linux, but little things like this are making it difficult. I'm kind of a noob, but I'm trying so please be nice.
View 9 Replies
View Related
Aug 26, 2010
I've tried ubuntu, kubuntu, fedora and linux mint. all 64 bit versions. I've also tried to suspend through applications like acpitool. But nothing works. When I click on Suspend, the screen goes blank but the computer is still running. The wireless network adaptor gets disabled for a second and then comes back on. All I have to do is press a key and I get the unlock screen prompt. Basically, suspend works like 'Lock Screen'. I have a HP Pavillion laptop. Core 2 Duo @ 2 GHz and 4 GB RAM.
View 12 Replies
View Related
Feb 25, 2011
I'm on opensuse 11.4 (11.3 won't work with my monitor).
My computer gets internet through wireless and I want to share that internet through its ethernet port. So far I've tried using Knetworkmanager to create a network bridge between my wireless and wired connections. I created a new wired connection and shared it using the ip address settings. I was able to get both connections active, but the device hooked up via ethernet had no internet connectivity.
I also tried this command:
echo 1 > /proc/sys/net/ipv4/ip_forward
but another test resulted in the same fashion (no internet on wired). I believe anything I add to /proc should have an immediate effect, correct?
View 9 Replies
View Related
Jan 31, 2011
I often use an Ethernet cable to connect my computer to another computer for various purposes. But when I do that, I cannot use the internet even though I'm still connected to a WiFi access point. I'm presuming that's because openSUSE is trying to reach the internet through the Ethernet cable, which has precedence over WiFi.Is there a way to enable internet usage via WiFi while I'm connected to another computer over Ethernet?
View 9 Replies
View Related
Aug 18, 2009
-bash-3.2# tar -xzvf lzo-2.03.tar.gz
gzip: stdout: Cannot allocate memory
lzo-2.03/
lzo-2.03/src/
[code]....
This is on a VPS with 256mb memory. vmstat and /prov/meminfo both show that over 200mb is free.
View 1 Replies
View Related
Mar 13, 2011
The good news: 11.4 seems to have much better support for my radeon graphics driver which makes many of my workarounds for 11.3 unnecessary
The bad news: whereas previously for 11.2, 11.3 using traditional ifup meant that I could easily restore internet (either wlan0 or eth0) with ifdown/ifup now this seems to have no effect. I haven't investigated further yet since without internet on hibernate or suspend 11.4 is not my grub of choice at the moment
There seem to be quite a few glitches with the 'stable' release of 11.4 but this seems to be the main problem for me. (Minimizing the beta 4 Firefox windows closing them is another...)
View 4 Replies
View Related
