OpenSUSE Multimedia :: Tring To Build QtGstreamer And Kamoso?
Feb 8, 2011
I was trying to install Kamosa (a KDE Webcam App) from
Code:
https://projects.kde.org/projects/pl...a/kamosoKamaso
but it requires QtGstreamer (bindings to Gstreamer with a more Qt-ish syntax) from
Code:
freedesktop.org]freedesktop.org git repository browser
I am stuck trying to build QtGstreamer and get this message:
Code:
CMake Error: The following variables are used in this project, but they are set to NOTFOUND.
Please set them or make sure they are set and tested correctly in the CMake files:
GSTREAMER_APP_LIBRARY (ADVANCED)
[Code]...
View 5 Replies
ADVERTISEMENT
Jun 19, 2010
this string of commands pops up when i try to boot up linux in any mode.fsck from util-linux-ng 2.16/dev/sda5:clean, 207703/1966080 files, 1500210/7859793 blocks (check in 2 mounts)i have no idea about computer stuff so
View 2 Replies
View Related
Aug 19, 2010
after about 30 min of trying to get the cinepaint-0.22-1.tar.gz to build on 11.3 64 bit i figured i would do some searching took about 15 min but new suse users won't have to figure out the posting in the suse forum archive ( 2007) Up-to-date Rpm For Cinepaint?
there IS a cinepaint for 11.3
add the repo
Index of /repositories/home:/bekun/openSUSE_11.3
into yast / Software Repositories
View 5 Replies
View Related
Feb 20, 2010
I'm in love with my Opensuse 11.2. Love my KDE 4.4. The only thing I miss from my Ubuntu installation, is the ability to use Boxee. I would be more than willing to compile Boxee from source. I only have 2 problems with that:
1) I don't know where I can find all the build-deps or what they are for that matter to build Boxee.
2) I'm running on a Netbook. Yes, my measly Intel Atom is no fun for compiling and building.
What are my options/what can I do to get Boxee up and running on 11.2? I've tried searching on build service for an RPM, but I think due to legal restrictions, Boxee can't be on there.
View 9 Replies
View Related
Feb 16, 2011
looking for LIBEVENT... configure: error: Package requirements (libevent >= 2.0.10) were not met: In order to build transmission 2.21.I need libeventnew version of transmission,I need to build libevent-dev >= 2.0.10 and installed first.But I can't get any information about building development files for libevent.
View 1 Replies
View Related
Apr 19, 2011
Ant was installed in yast2 but will not run since build.xml was never created. How can this be fixed? I would like to run AudioTool.
View 5 Replies
View Related
Oct 1, 2010
I am trying to build a multiseat linux system(Build a Six-headed, Six-user Linux System LG #124). I am posting some outputs output of lspci | grep VGA
Code:
00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
02:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 8400 GS] (rev a1)
ls /dev/input/mouse*
Code:
/dev/input/mouse0 /dev/input/mouse1 /dev/input/mouse2
more /proc/bus/input/devices
[Code]...
I am having trouble in configuring xorg.conf. I am running Suse 11.3 desktop on my PC. Also, I have one onboard nvidia graphics 6150SE and I have put one nvidia 8400GS 512Mb in the 16X PCIe slot for the additional seat...
So kindly tell me what should I do now or what things are missing ?? For any further info abt my PC plz tell me to post outputs(specify the commands for the same..)
View 11 Replies
View Related
Jul 28, 2010
I have been using 'radeon' driver in 11.3 for a few days and its working great for my desktop. But then I decided to try the new 10.7 ATI driver and followed the sequence here. Everything went alright, until I get at "Loading the new build module"
[code]...
So I just reboot and now, X is gone, and I'm in runlevel 3. What is wrong here?
View 2 Replies
View Related
Oct 29, 2010
I've downloaded vlc 1.1.4.1.tar.bz2 from the internet, as I have problem using the 'sudo apt-get' command which is due to the fact that my USB Internet Modem provider didnt cared to make it compatible with Linux. I presently connect to internet using Nokia PC Suite [available only in Windows, as you all may know] to browse the net. Currently I've a dual-boot with Ubuntu 10.04 and Windows 7.
I tried building it by following the instructions in the INSTALL file, but it wont just work!
View 8 Replies
View Related
Feb 4, 2011
I need to build openSuSE with the bare essentials + X. I want no-fluff + KDE 3.5-Desktop (no extras).
Is there a way to do this manually ? Any other options ? Widdling away at RPMs just got me a broken VM so I'll skip trying that again.
View 1 Replies
View Related
Sep 24, 2009
as I'm advancing in building some nice rpm I finally wanted to install on of my gems also the build was successful the actual install fails with missing dependencies.
Code:
$ rpm --root /home/sascha/rpmbuild/ -i ./RPMS/x86_64/memcached-1.4.1-2.x86_64.rpm
error: Failed dependencies:
libc.so.6()(64bit) is needed by memcached-1.4.1-2.x86_64
libc.so.6(GLIBC_2.2.5)(64bit) is needed by memcached-1.4.1-2.x86_64
[code]....
View 1 Replies
View Related
Jul 23, 2010
I'm trying to build a system that uses jack2. So far as I can see, the jack version in Lenny repos is jack, rather than jack2. The jack website implies there is a .deb for jack2, but doesn't reveal how to access it. What should my next move be?
View 2 Replies
View Related
Mar 5, 2010
I want to install "mad"(gstreamer mm3 plugin), it comes in gst-plugin-ugly but when i do ./configure it show mad in list of plugins that will not be build I also intalled libmad.
how can i build mad in gst-plugin-ugly
View 1 Replies
View Related
May 19, 2010
So I'm sitting on some components from my old pc build and am looking to stream over my tv once again. My decision rests on do I build the box, run Boxee and/or Windows Media Platform to keep the box with my TV or do I buy the 35ft RCA video cable and dvi composite out adapter for my video card and go that route? All my music and media is stored on a external backup drive so the box I build would not have access to the media unless I could create a wireless network but I do not know how to do this with Ubuntu. Anyone willing to hold my hand and help me walk through this to get a decision made?
View 2 Replies
View Related
Feb 11, 2011
I have an init script running as a special build user which performs an automated build that fails with (Too many open files).I updated /etc/security/limits to allow the special user more open files, but that didn't work - the init script still isn't allowed more open files.Here's a demonstration of the problem;
Code:
$ su - sbsbuild -c "ulimit -n"
Password:
[code]....
View 1 Replies
View Related
Sep 16, 2010
Trying to install SW 13.1 (on DVD) on the following system: M/B Intel: DX38BT Processor Intel Core 2 Quad Q6700 - 2.66GHz, 8MB Cache, 1066MHz FSB, Socket 775 Memory Corsair Dual Channel 8192MB PC10600 DDR3 1333MHz Memory (4x2048MB) Graphics Diamond Radeon HD 3850 Video Card - Viper, 512MB GDDR3, PCI Express 2.0 P/S Ultra 1000W
My goal is to install the i386 build on one partition and the 64-bit build on another. I have been away from Linux for a while and am sick to death of Win7, want to come home. :-}
Booted on i386 side of DVD, system freezes after a couple of lines that start with ATA2. Does not respond to 3 finger salute, ctrl-c, nothing. Have to press reset. I have tried both huge.s and hugesmp.s kernels
Booted on 64-bit side, comes up fine. I performed the install, selected for automatic lilo install. Lilo install hung but I was able to reboot. I booted off the 64-bit side again, entered the following: huge.s root=/dev/sde3 rdinit= ro It booted fully to the login prompt but the keyboard does not work, no input.
View 2 Replies
View Related
May 19, 2011
when I try to install pattern Gnome 3: nothing provides libcheese-gtk 19 needed by pattern:GNOME 3-.noarch:This library does not appear on the openSUSE build service either.It would appear that the pattern is present in Yast but impossible to install.
View 4 Replies
View Related
Apr 7, 2010
I want to try encoding some videos with Dirac. I was told on another site that I have to build mencoder with Schroedinger support if I want to do this with OGMRip. I have installed the libschroedinger package installed. How do I buld it with mencoder?
I am using Ubuntu 10.04.
View 1 Replies
View Related
Aug 27, 2010
I am trying to build a media center for music for me and my roommates to use. Basically I want to build a system just for playing music. Idealy (dare i mention itunes in here) I would love a computer just just booted into itunes(orsomething like it (or better) that just was for playing music.
I plan on buying a computer, like a tiny desktop (i dont want to take up a lot of room) with a huge hard drive just for holding music, and needs usb drives/cd drive for loading music onto it (or just a usb drive). Then get a small screen, not huge with a remote that does not run on wife. Also would like a keyboard on the remote if possible.
Anywho whats a good media center, and can I boot just straight into the media center? I would like support for; browse by artist, album and just song name. Also I would like to be able to make playlist within it, and it needs to be able to support a massive amount of songs.
desktop computers to use for this project and remotes that I could use? Also how would you suggest the best way to go about doing this? I would love if it booted straight into the media player. Internet is not a huge deal to me, might connect to internet once just to grab album artwork. So a media player that auto fetches artwork too would also be nice.
View 2 Replies
View Related
Apr 7, 2010
Did not find much here regarding building Gnome 2.30 from source. I'm using jhbuild to build the gnome 2.30 desktop. I have everything, to my knowledge, installed to build gnome. I get an error when trying to build the libIDL library. Anyone have any clue as to what I need installed or changed in the configuration file to build libIDL?
View 1 Replies
View Related
Feb 26, 2011
before i get a lot of annoyed responses, I did check the forum and found a couple older previous threads on this topic, but they don't seem to really explain any real solutions to the problem im having.Here's the story- I was looking around for instructions and found this "howto guide" on installing nvidia display driver [URL]I went through the steps he listed:
downloaded the driver packages, install the dependencies from the shell, and then i pressed CTRL+ALT+F2 to get out of X and into text mode. I stopped my gdm with the command: sudo /etc/init.d/gdm stopand then i tried to install the driver using: sudo sh (on my NVIDIA driver- his version was a bit outdated compared to the one I downloaded)But here is where the problem starts, as I go through the installation process and click yes, i reach the "progress bar" then the screen says "unable to build the NVIDIA kernel module". and then it just exits. What is going on here? Am I missing some other package or file?
View 1 Replies
View Related
May 1, 2011
This is the result of reading lots of advice on this forum and elsewhere--thought I'd put it into one post for people's convenience. Picked up the latest tarball at [URL]... Unpacked the tarball with tar -zxvf nameofball.tar.
Loaded the following packages that it depended on: sudo apt-get install build-essential libtagc0-dev gperf libunistring-dev pkg-config zlib1g-dev libconfuse-dev libavahi-client-dev libsqlite3-dev libavcodec-dev libavformat-dev libswscale-dev libmxml-dev libevent-dev libavl-dev libantlr3c-dev libgcrypt11-dev libflac-dev libogg-dev libtagc0-dev libasound2-dev .
Ran ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --enable-flac --enable-musepack. Fix any errors that show up by tracking down a dependency that I hadn't listed above. Keep on running until it has no errors. Then make; sudo make install. I had installed checkinstall, so I ran make; sudo checkinstall -D instead.
Then to set up the system:
Code:
#make an init.d script (the script I used is at the end of this post)
sudo -e /etc/init.d/forked-daapd
sudo chmod +x /etc/init.d/forked-daapd
sudo update-rc.d forked-daapd defaults
[Code]...
View 6 Replies
View Related
Jul 23, 2011
What is the minimum price I can expect to spend to build a Mythbuntu computer from scratch, and are there any good guides out there explaining how to do it?
View 1 Replies
View Related
Dec 31, 2008
I've been building Celestia KDE for a long time. I built it on Suse 9.2, 9.3, 10.0, 10.2. Now that I installed 11.1, I can't build the kde version anymore. When it starts to build the kde gui, it looks at QT4 headers in /usr/include and fails. I noticed that Celestia 1.5.1 is available in Suse 11.1. How was this application built?
View 5 Replies
View Related
Feb 13, 2011
I'm new to Linux, and want to build a system for openSuse 11.3 on Friday.I plan to buy everything then.I'm using Ubuntu now on my laptop.My question is what do you think of the P4 prescott e series 800 mhz FSB as a processor for openSuse.Offer other processors if they will do a good job.
View 1 Replies
View Related
Jul 29, 2010
I was having some trouble trying to get video editing directly with Theora OGVs on Ubuntu 10.04. To be honest, the default Lucid video editor Pitivi (which is a front-end for gstreamer) actually works fine with ogv - but you cannot do video overlays (compositing) in Pitivi. So I looked at Cinelerra, LiVES, OpenShot and Kdenlive as editors that may offer overlays/compositing. They can all be sudo apt-get install-ed, but none of them wanted to run properly with ogvs - especially the ogv video preview didn't work. Looking for a solution, the following bugs came up:
Bug #574457 in mlt (Ubuntu): �melt displays and renders garbage while playing .ogv in ubuntu 10.04�
Bug #535018 in openshot (Ubuntu): �Openshot cannot playback ogg video�
Bug #566781 in OpenShot Video Editor: �Imported Ogg Theora file shows corrupted video in OpenShot 1.1.3�
[code].....
However, since it doesn't seem a bugfix will be released for Lucid - that pretty much means only one thing, if we want video editing of ogv in Lucid: build from source. If we build all dependencies for Theora ogv video from the latest source: melt
ffmpeg
vorbis
theora
ogg
then, in principle, working with ogv in Openshot and/or Kdenlive should (and does) work - if these video editors are directed to use these new binaries (built from source). Note that Openshot is basically a python frontend for melt, and it does not need compiling as such (though some precautions should be taken, see below) - so once the above sources are built, a test with Openshot can be done. I used for building these sources is HOWTO: Install and use the latest FFmpeg and x264 - Ubuntu Forums This HOWTO uses checkinstall in order to generate .deb packages from source, which are then installed into the running OS, to allow for satisfying of dependencies. I'd like to keep my system 'vanilla' clean, and experiment with sources outside of my system (i.e. as in a "portable installation") - and this post outlines that approach.
Basically, we download the sources, and build them in order of dependency - and since ogg/vorbis/theora source already uses it, we can use pkg-config to configure some other source dependencies as well: by writing *-uninstalled.pc files in respective source directories; and then adding these directories to the PKG_CONFIG_PATH environment variable. However, some manual changes to source files will be needed too. Finally, for each source package, we will run only 'make', but not 'make install' - and then in the end, we will collect all binaries (libraries and executables) in a single folder; and add a couple of scripts, that will setup an environment referring to these binaries, so that Openshot/Kdenlive (when called from this environment) may work correctly with ogv. The full list of sources built using this approach are: ogg
vorbis
theora
[code]....
Both x264, and libvpx (for VP8/WebM), have been added as recommended in the HOWTO; while Ogg Video Tools are added mostly for the (relatively new) tool oggTranscode. The approach to building these sources is given below, in the form of a commented bash script - since its quite big, it is included in the reply to this post.
References: Xiph.org: Subversion Access
oggvideotools/trunk/README
Compiled libogg but libvorbis can't find libogg during ./configure - Linux Forums
[cod]....
View 2 Replies
View Related
Jul 4, 2009
When I build the kernel 2.6.30 source, the rpm package is very big and needed or root filesystem 800-900 Mb. I use "make rpm" as described in Configure, Build and Install a Custom Linux Kernel - openSUSE.
View 7 Replies
View Related
May 14, 2010
I wanted to build a whiteboard, but im not sure if the programs will work on my setting: 11.2 with gnome. I have seen the linux-files, but it says ubuntu, does it matter?
View 2 Replies
View Related
Apr 12, 2010
How to build the live DVD with win32? Can I use makeSUSEdvd?
View 5 Replies
View Related
Jan 25, 2009
On my opensuse 11.1 system. I used my tp-link tl-wn321g usb wireless adapter to access the internet. It runs on rt2501 chipset and I used the serial monkey rt73 driver from here.
[URL]
What I did was I installed the kernel-headers, kernel source, gcc and make. And then I cd to the module directory and did
Code:
make
make install
modprobe rt73
[Code].....
I installed "ralink-firmware-1.1-1.5.noarch.rpm" from Software.openSUSE.org. I tried "make" again, but still the same error return.
View 3 Replies
View Related
