when I try to install pattern Gnome 3: nothing provides libcheese-gtk 19 needed by pattern:GNOME 3-.noarch:This library does not appear on the openSUSE build service either.It would appear that the pattern is present in Yast but impossible to install.
View 4 RepliesI'm in the process of making my own build using SUSE Studio build service. I was hoping if someone would kindly tell me about kernel-firmware, what it does and if it is absolutely necessary because I noticed that it is not selected for you by default. Any other useful firmware that I may need. I have already included the b43-firmware, ar9170-firmware, bluez-firmware, and ivtv-firmware in my build based on openSUSE 11.4.
View 4 Replies View RelatedI'm in love with my Opensuse 11.2. Love my KDE 4.4. The only thing I miss from my Ubuntu installation, is the ability to use Boxee. I would be more than willing to compile Boxee from source. I only have 2 problems with that:
1) I don't know where I can find all the build-deps or what they are for that matter to build Boxee.
2) I'm running on a Netbook. Yes, my measly Intel Atom is no fun for compiling and building.
What are my options/what can I do to get Boxee up and running on 11.2? I've tried searching on build service for an RPM, but I think due to legal restrictions, Boxee can't be on there.
looking for LIBEVENT... configure: error: Package requirements (libevent >= 2.0.10) were not met: In order to build transmission 2.21.I need libeventnew version of transmission,I need to build libevent-dev >= 2.0.10 and installed first.But I can't get any information about building development files for libevent.
View 1 Replies View RelatedAnt was installed in yast2 but will not run since build.xml was never created. How can this be fixed? I would like to run AudioTool.
View 5 Replies View RelatedI need to build openSuSE with the bare essentials + X. I want no-fluff + KDE 3.5-Desktop (no extras).
Is there a way to do this manually ? Any other options ? Widdling away at RPMs just got me a broken VM so I'll skip trying that again.
I am trying to build a multiseat linux system(Build a Six-headed, Six-user Linux System LG #124). I am posting some outputs output of lspci | grep VGA
Code:
00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
02:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 8400 GS] (rev a1)
ls /dev/input/mouse*
Code:
/dev/input/mouse0 /dev/input/mouse1 /dev/input/mouse2
more /proc/bus/input/devices
[Code]...
I am having trouble in configuring xorg.conf. I am running Suse 11.3 desktop on my PC. Also, I have one onboard nvidia graphics 6150SE and I have put one nvidia 8400GS 512Mb in the 16X PCIe slot for the additional seat...
So kindly tell me what should I do now or what things are missing ?? For any further info abt my PC plz tell me to post outputs(specify the commands for the same..)
The desktop search has stopped working in Gnome.I get a message that says 'Search Service not running' with a button that says 'Start Search Service'.When I click the button nothing happens
View 1 Replies View RelatedI'm trying to use buildroot to cross compile some libraries for me. To do so I've set up build root to point to my working tool chain in the menuconfig.All seems fine however when I try to make (buildroot) I get the following error
rm -rf /root/buildroot-2010.05/output/build/buildroot-config
mkdir -p /root/buildroot-2010.05/output/build
cp -dpRf package/config/buildroot-config /root/buildroot-2010.05/output/build/buildroot-config
Checking external toolchain settings
Incorrect selection of the C library
make: *** [/root/buildroot-2010.05/output/stamps/ext-toolchain-installed] Error 255
I know it's pointing to the correct files and gcc as any wrong paths are reported in make menuconfig.
I want to build a package from source using src2pkg, but I don't know how to avoid library miss match. Suppose I have Firefox 3.5.2 on Slackware 13.0 64 and I want to upgrade it to 3.6.2. Last time when I venturesomely installed Firefox-3.6.2-current into my Slackware 13.0, I got library miss match. Thus, instead of upgrading the whole packages to current (which is impractical and cumbersome), I want to build 3.6.2 from source. How can I do this? Is there any guideline how to use src2pkg? Or should I rather use makepkg? Do I need to create a Makefile?
View 7 Replies View RelatedI am able to build a shared library under solaris with
/usr/local/bin/g++ -G -o output.so file1.o file2.o file3.o.
How do I build the shared library under linux using the same files?
I have tried to use the same command /usr/local/bin/g++ -g -o but I got some undefined references, even if those references are defined in one of the object files.
I'm tring to run AMDOverdriveCtrl, since they don't have an RPM file for Fedora i tried to compile from source i followed the instruction in the readme files run the make command
Code:
% make
g++ -mwindows -s -pthread -lwx_gtk2u_richtext-2.8 -lwx_gtk2u_aui-2.8 -lwx_gtk2u_xrc-2.8 -lwx_gtk2u_qa-2.8 -lwx_gtk2u_html-2.8 -lwx_gtk2u_adv-2.8 -lwx_gtk2u_core-2.8 -lwx_baseu_xml-2.8 -lwx_baseu_net-2.8 -lwx_baseu-2.8 -ldl -o./Release/AMDOverdriveCtrl ./src/CFanSpeedPanel.o ./src/COvdrSettingsPanel.o ./src/CFanControlPanel.o ./src/CColorTempPanel.o ./src/BezierMath.o ./src/Color.o
[code]....
and tried to run the application, and i get this error message
Code:
$ AMDOverdriveCtrl
Fatal Error: Mismatch between the program and library build versions detected.
The library used 2.8 (no debug,Unicode,compiler with C++ ABI 1002,wx containers,compatible with 2.4,compatible with 2.6), and your program used 2.8 (no debug,Unicode,compiler with C++ ABI 1002,wx containers,compatible with 2.6).
I've just updated my system from SuSE 11.2 to 11.4 (I'm using KDE desktop environment) I like to install SeaMonkey myself. I use the installer from the Mozilla site. When I try to run SeaMonkey, this is what happens:
Code:
./seamonkey-bin: error while loading shared libraries: libdbus-glib-1.so.2: cannot open shared object file: No such file or directory
Where do I get the missing library? I've tried searching for it on the rpmpbone site RPM Search and even they couldn't find it.
I just installed KOffice, and all components listed with it under Office-Suite, using YaST's Add/Remove Software and I receive this error whenever I try running KWord The plugin 'kwordpart' uses an incompatible kde library (4.71 (4.71)).
KWord then does not run. Does anyone know what might be causing this?
I use Audacity quite a lot for conversion of a voice recorder, to convert WMA to FLACWhen I used it Mar 24 it worked, when used it Mar 26 it didn't.I used the locate pointed it to libavcodec.so.52 like it had there & it tells me it can't find it! At first I thought it was an update I'd done from the Packman reposonly when I went to Yast to revert only the most recent update was in there, no prior versions. Yet I Know that ffmpeg was among the updates it was blue when I did it then.Other distro's don't have this problem only Suse who or where or what should I do so that Audacity works in Suse again?
View 6 Replies View RelatedOn Opensuse 11.4 64bit, on a Dell E6410 notebook. Installed the 32bit dependencies from SDB: Skype (SDB:Skype - openSUSE ) i.e. su -c 'zypper install libasound2-32bit xorg-x11-libXv-32bit xorg-x11-libs-32bit libqt4-x11-32bit libpng12-0-32bit' Then installed the latest version (2.2.0.25 from Skype website for openSuse 11+
And when launching skype in a terminal window I get "Fatal: Cannot mix incompatible Qt library (version 0x40702) with this library (version 0x40701) Aborted" And this corresponds tot requireing an older QT library for Skype than is the current version from openSuse 11.4 How do I fix this?? I've already pursued all other solutions I could find.
It is a digital simulation program that works with QUCS which is anelectrical circuit simulator.I can compile it and install it using the normal:
./configure
make
sudo make install
[code]....
I was looking to install the message passing library MPICH2. In yast with my repos, only mpich 1 comes up. I tried looking for unofficla repos that had it,a nd in fact google threw up a user called Rotkraut's repor directory, but thought he google search engine could see it, I couldn't. So I went over to the mpich website and saw that several rpms were available for different version of fedora. Is it useful to try those? And if so, which version? Fedora 10? Fedora 11? Fedora 12?
View 2 Replies View RelatedI'm using Amarok 2.3.2 on openSUSE 11.3 with KDE 4.4.4r3. How can I enable DAAP sharing of my Music library so that I'm able to access it in Rhythmbox from my Linux Mint 9 desktop?
View 1 Replies View RelatedThat was released in October 2008, superseded in March 2009, and the current release is 1.4.3. It also doesn't work together with Python, but that's a more esoteric issue. Both of them are too clever by half, and the combination breaks the library loading mechanism. That's an old issue, with an old fix - though I haven't yet checked my rebuild, so there may be more than one problem.
View 1 Replies View RelatedThis is the error I receive when I try to install a library. I really do not know If I could do something to skip this error message.As you might see below. I receive the following error message Error in dyn.load(file, DLLpath = DLLpath, ...):unable to load shared library '/home/apa/R/x86_64-unknown-linux-gnu-library2.11/RandomFields/libs/RandomFields.so': /usr/lib64/R/lib/libRlapack.so: undefined symbol: _gfortran_concat_string
This is the full error log
Bash | [CODE]* installing *source* - Anonymous - d4DH09Wx - Pastebin.com
I am trying desperatly to install boxee onto my pc Boxee - Watch Movies, TV Shows and clips from the Internet on your TV.without success.I have downloaded the source code from the site and have ran
./bootstrap
./configure
The ./configure last few lines =
checking for boost/shared_ptr.hpp... yes
checking for main in -lGL... no
configure: error: Could not find a required library. Please see the README for your platform.
I'm not sure what this lGL is referring to. The readme states that I need the below to run the configure, though that doesn't say lGL either?
Build-Depends: debhelper (>= 7.0.50), quilt, python-support, cmake,
autotools-dev, autoconf, automake, unzip, libboost-dev,
libgl1-mesa-dev | libgl-dev, libglu-dev, libglew-dev, libmad0-dev, libjpeg-dev,
libsamplerate-dev, libogg-dev, libvorbis-dev, libfreetype6-dev,
libfontconfig-dev, libbz2-dev, libfribidi-dev, libsqlite3-dev,
code....
Just installed OpenSUSE 11.3 64-bit. I have a program that uses libjpeg, so I installed libjpeg and the dev modules. It has both version 6 and 8 installed. When I run my prog and try to access the lib I get this error: Wrong JPEG library version: library is 80, caller expects 62 This seems a common problem elsewhere. Anyone know how to fix it in 11.3 ?
View 1 Replies View RelatedI've been building Celestia KDE for a long time. I built it on Suse 9.2, 9.3, 10.0, 10.2. Now that I installed 11.1, I can't build the kde version anymore. When it starts to build the kde gui, it looks at QT4 headers in /usr/include and fails. I noticed that Celestia 1.5.1 is available in Suse 11.1. How was this application built?
View 5 Replies View RelatedI'm new to Linux, and want to build a system for openSuse 11.3 on Friday.I plan to buy everything then.I'm using Ubuntu now on my laptop.My question is what do you think of the P4 prescott e series 800 mhz FSB as a processor for openSuse.Offer other processors if they will do a good job.
View 1 Replies View RelatedI have a box Suse 11.1 with a service that (I dont know why) every day stop at the same time. Im finding why it come to a halt but in the meantime I would like restart it automatically.As root I insert in crontab the line:25 16 * * * /etc/init.d/service startBut it don works
If I launch manually /etc/init.d/service start (or stop) it works
When would the zypper service be dead for openSUSE 11.2?
View 2 Replies View RelatedI just installed Tomcat 7.0 on openSuse 11.3 by mean:
Code:
tar -zxvf apache-tomcat-7.0.6.tar.gz
And I can to start it manually. But I need to start it automatically as "system service" in some runlevels.
install Tomcat 7.0 as system service?
I run Amarok 2.4.3 from KDR 4.7. I noticed that Last.fm is not listed among the services.Nor is the usual "Like" icon displayed in the middle pane. And Amarok doesn't scrobble. I have liblastfm0 installed and I installed liblastfm (no "0") from KDR yesterday, but that didn't help. So these should all be from the same repo (can't check right now as package kit is doing updates). Any clue what I have to do to get the service back? I use openSUSE 11.4 and KDE 4.7 from the Release repo.
View 5 Replies View RelatedAs most do now my local library has a decent catalog of audiobooks, which I would like to be able to listen to on my iPod. These books can be downloaded only by using Overdrive Media Console (which is available only for Windows and Mac, and also requires Windows Media Player to work!) and iTunes if you want to transfer to an iPod.
I've searched around for Linux friendly solutions. They fall into two categories, try Wine/virtual machine/dual boot to run the required software, or give up. But pretty much everything I have found is about four years old now. Has anything changed in the last few years, or is this still pretty much the way things are? At the moment I use my girlfriend's Vista computer to download books, but I would like to be as Windows free as possible, and able to do it on my own computer.
Can anyone offer advice for being able to download audiobooks and put them on an iPod, with a minimum of non-Linux software? Relatedly, I would also be quite happy to replace the iPod firmware with Rockbox, but from what I can tell that would make library audiobooks even less accessible (so asking if this is an option is like asking for $10 after being refused $1).