Slackware :: Install The I386 Build On One Partition And The 64-bit Build On Another

Sep 16, 2010

Trying to install SW 13.1 (on DVD) on the following system: M/B Intel: DX38BT Processor Intel Core 2 Quad Q6700 - 2.66GHz, 8MB Cache, 1066MHz FSB, Socket 775 Memory Corsair Dual Channel 8192MB PC10600 DDR3 1333MHz Memory (4x2048MB) Graphics Diamond Radeon HD 3850 Video Card - Viper, 512MB GDDR3, PCI Express 2.0 P/S Ultra 1000W

My goal is to install the i386 build on one partition and the 64-bit build on another. I have been away from Linux for a while and am sick to death of Win7, want to come home. :-}

Booted on i386 side of DVD, system freezes after a couple of lines that start with ATA2. Does not respond to 3 finger salute, ctrl-c, nothing. Have to press reset. I have tried both huge.s and hugesmp.s kernels

Booted on 64-bit side, comes up fine. I performed the install, selected for automatic lilo install. Lilo install hung but I was able to reboot. I booted off the 64-bit side again, entered the following: huge.s root=/dev/sde3 rdinit= ro It booted fully to the login prompt but the keyboard does not work, no input.

View 2 Replies


ADVERTISEMENT

OpenSUSE Install :: Build A Multiseat System (Build A Six-headed Six-user System LG #124)

Oct 1, 2010

I am trying to build a multiseat linux system(Build a Six-headed, Six-user Linux System LG #124). I am posting some outputs output of lspci | grep VGA

Code:
00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
02:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 8400 GS] (rev a1)
ls /dev/input/mouse*
Code:
/dev/input/mouse0 /dev/input/mouse1 /dev/input/mouse2
more /proc/bus/input/devices

[Code]...

I am having trouble in configuring xorg.conf. I am running Suse 11.3 desktop on my PC. Also, I have one onboard nvidia graphics 6150SE and I have put one nvidia 8400GS 512Mb in the 16X PCIe slot for the additional seat...

So kindly tell me what should I do now or what things are missing ?? For any further info abt my PC plz tell me to post outputs(specify the commands for the same..)

View 11 Replies View Related

Slackware :: Xemacs - Build Or Install It ?

May 25, 2011

Anybody use xemacs with slackware? If so, how did you build or install it? I've used it in the past with other distros. I briefly tried emacs but because I was used to xemacs, gave up on it.

View 2 Replies View Related

OpenSUSE :: Find All The Build-deps Or What They Are For That Matter To Build Boxee

Feb 20, 2010

I'm in love with my Opensuse 11.2. Love my KDE 4.4. The only thing I miss from my Ubuntu installation, is the ability to use Boxee. I would be more than willing to compile Boxee from source. I only have 2 problems with that:

1) I don't know where I can find all the build-deps or what they are for that matter to build Boxee.

2) I'm running on a Netbook. Yes, my measly Intel Atom is no fun for compiling and building.

What are my options/what can I do to get Boxee up and running on 11.2? I've tried searching on build service for an RPM, but I think due to legal restrictions, Boxee can't be on there.

View 9 Replies View Related

OpenSUSE :: Build Libevent-dev 2.0.10 In Ooder To Build New Version Of Transmission?

Feb 16, 2011

looking for LIBEVENT... configure: error: Package requirements (libevent >= 2.0.10) were not met: In order to build transmission 2.21.I need libeventnew version of transmission,I need to build libevent-dev >= 2.0.10 and installed first.But I can't get any information about building development files for libevent.

View 1 Replies View Related

Software :: Self Build Rpm Fails With Missing Dependencies On Build Host?

Sep 24, 2009

as I'm advancing in building some nice rpm I finally wanted to install on of my gems also the build was successful the actual install fails with missing dependencies.

Code:

$ rpm --root /home/sascha/rpmbuild/ -i ./RPMS/x86_64/memcached-1.4.1-2.x86_64.rpm
error: Failed dependencies:
libc.so.6()(64bit) is needed by memcached-1.4.1-2.x86_64
libc.so.6(GLIBC_2.2.5)(64bit) is needed by memcached-1.4.1-2.x86_64

[code]....

View 1 Replies View Related

Ubuntu Security :: Script Running As A Special Build User Which Performs An Automated Build That Fails With (Too Many Open Files)?

Feb 11, 2011

I have an init script running as a special build user which performs an automated build that fails with (Too many open files).I updated /etc/security/limits to allow the special user more open files, but that didn't work - the init script still isn't allowed more open files.Here's a demonstration of the problem;

Code:
$ su - sbsbuild -c "ulimit -n"
Password:

[code]....

View 1 Replies View Related

OpenSUSE :: Ant Build.xml Does Not Exist - Build Failed

Apr 19, 2011

Ant was installed in yast2 but will not run since build.xml was never created. How can this be fixed? I would like to run AudioTool.

View 5 Replies View Related

Slackware :: Slackware 13.1 Build Package Net-snmp With LmSensors Support?

Nov 17, 2010

I downloaded from http://ftp.nluug.nl/os/Linux/distr/s...ce/n/net-snmp/ source and I build new package and works ok no errors. If I change net-snmp.SlackBuild and add CFLAGS --with-mib-modules=ucd-snmp/lmSensors --with-ldflags=-lsensors while I need lmsensors support in net-snmp. But the package compiling ends with error:

[Code]...

View 2 Replies View Related

Slackware :: VLC Build For 13.37 X64?

May 9, 2011

Is there a VLC build for 13.37 x64? I tried Alien's 13.1 build, but the sound was missing.

View 2 Replies View Related

Slackware :: Build Several Packages Designed For Slackware 13 At Slackbuilds?

Jan 24, 2010

I tried to build several packages designed for slackware 13 at slackbuilds. Those was a simple apps like ardour, audacity for example.

[Code]...

My CPU is AMD Phenom 9550 Quad core. It supports 64 bit. My os is slackware 13_64. What do I need to change in slackbuild to create a txz package for those apps?

View 14 Replies View Related

Slackware :: Build FreeCad And K-3d ?

Apr 3, 2010

I have been trying to build FreeCad and k-3d for Slackware......not much luck...

FreeCad has two build systems... automake and cmake, both fail despite the fact that dependencies are installed...cmake build system fails at about 80% complaining that it cannot find

Quote:

I guess the build system is broken...About K-3d, the thing builds alright..had to install libsig++ glibmm cairomm pangomm and gtkmm as dependencies...

The thing actually builds but when i try to make the installable package, I have to use trackinstall -i="make -i install", but the installable package fails to launch because it cannot find stuff in /usr/share/

View 13 Replies View Related

Slackware :: Build ELMER-Fem For 64 13?

Jan 19, 2010

I'll teach here how to build a package for Slackware64 13 This is a multiphysics Finite elements code made by the Finnish check [URL] If their Finite Elements Codes are as "user-friendly" as their gals are, we should all be fine...( Just kidding here, ppl) Now, to work : Download the sources from SVN

[Code]....

View 1 Replies View Related

Slackware :: Build Handbrake Error - Gtk.install - Error 2

Aug 14, 2010

I need handbrake software so badly so I went to alien's slackbuild to download the handbrake.However,it ends with error after compiling-

Does it mean i miss something of gtk?

View 8 Replies View Related

Slackware :: Can't Build Evince Or Epdfview

Oct 10, 2010

I've been trying to replace the KDE apps I still use in Fluxbox and I was trying to build epdfview using the Slackbuild. When it had to build its parts that depend on poppler, make crashed. The same thing happened when I tried to build evince. What is going on in my PC? I'm running an updated -current 64 bits. I made screenshots of both errors

View 9 Replies View Related

General :: Build DNS Server In Slackware?

Jun 19, 2010

how to build DNS server in linux slackware...

View 4 Replies View Related

Slackware :: Broadcom-sta Won't Build With 2.6.33.1 Kernel

Apr 12, 2010

running current on a Lenovo S10

the b43 driver craps out every few minutes.

so i decided to try the sta driver.

i downloaded the slackbuild but it crashes with the following see attached

View 14 Replies View Related

Slackware :: Can't Get Qdvdauthor To Build Using Slackbuilds?

Jun 1, 2011

Here are the last several lines from running the Slackbuild script.

Quote:
make: *** [.obj/server.o] Error 1
make: *** Waiting for unfinished jobs....
In file included from /usr/include/libavutil/avutil.h:81:0,
from engine/ffmpeg_enc.h:35,
from slideshow.h:19,

[Code]...

View 4 Replies View Related

Slackware :: Can't Build Evince Or Epdfview?

Apr 22, 2011

I've been trying to replace the KDE apps I still use in Fluxbox and I was trying to build epdfview using the Slackbuild. When it had to build its parts that depend on poppler, make crashed. The same thing happened when I tried to build evince. What is going on in my PC? I'm running an updated -current 64 bitsI made screenshots of both errors, which can give you guys more information.

View 7 Replies View Related

Slackware :: Commoncpp2 Build Failures?

Jul 27, 2011

I'm getting silly stuff from this when I try compiling commoncpp2. With the SlackBuild & version 1.5.3 I get

Code:
Making all in src
make[1]: Entering directory `/tmp/build/tmp-commoncpp2/commoncpp2-1.5.3/src'

[code]....

View 2 Replies View Related

Slackware :: Easystroke 0.5.3 Build Fails

Jun 23, 2010

using slakware64 13.1 modified sbo slackbuild for latest version..

View 7 Replies View Related

Slackware :: Build Gbrainy For X64 13.1 / Current Without GSB?

Aug 18, 2010

Has anyone successfully build Gbrainy for Slackware x64 13.1/Current?

View 2 Replies View Related

Slackware :: How To Build A Slackbuild Script

Oct 29, 2010

Any links to a guide for building a slackbuid script?[URL]SlackBuild_Script don't show nothing!

View 13 Replies View Related

Slackware :: Use Gnome Instead Of The Official KDE Build?

Jan 4, 2010

I was wondering on how to use Gnome instead of the official KDE build. I know I can go to the third party slackbuilds.org. But not sure where to look on how to install it. If someone can direct me in the right direction that would be swell.

I am looking for a install step by step guide for Gnome. I was also curious if the Gnome version would provide me the same stability and speed as the official Slackware with KDE.

My second question is regarding the Slackbook project. I know I can get the pdf file and print it out but I was hoping for a book that can get shipped to me and when I purchase it the proceeds go to the Slackware organization.

View 5 Replies View Related

Slackware :: KDE 4.5.4 Bindings Build Fails

Dec 4, 2010

I'm trying to build/install KDE 4.5.4, but I run into problems with the bindings package. Build fails with the following:

[Code]....

I'm building using the KDE slackbuild from sources dir, with the new KDE packages. edit: Well I decided to just take the risk of a not working KDE and commented out the bindings package. All other packages build fine. After this I crossed my fingers and rebooted, KDE loaded up. I gave the bindings package another go, and to my surprise it did build now. Got KDE up to date and it seems to be running fine.

View 6 Replies View Related

Slackware :: KDE Has Been Build Without Zeroconf Support?

Aug 2, 2010

Work I've got 2 slackware 13.1 64 machines, and they work just fine: Basic installation, everything ' bog standard 'When in Dolphin or Konqueror, I can ' click ' on Network Services and all the other MS Window machines pop-up.

@Home I've got 2 slackware 13.1 64 machines, they don't work fine. Basic installation, everything ' bog standard '. When in Dolphin or Konqueror, I can 'click' on Network Services and 'KDE has been build without Zeroconf support' pops up in Konqueror or is displayed in Dolpin..

Is it my netwerk @ Home (with an old Windows Server in it) or is something missing in the installation? Under MS windows (from within a virtualbox, brigded network) both machines can browse the network just perfectly: I even got a XP machine 'joined' in the domain on the windows server). Clueless since a google on the error + slackware give me Zero. Zeroconf in the slackware forum give me some midly related

View 9 Replies View Related

Slackware :: Ndiswrapper Will Not Build On -current?

Oct 17, 2010

here is the compiler output when i try to build the slackware package

[Code]...

View 4 Replies View Related

Slackware :: How To Build Luabind Properly

Apr 19, 2011

how to build luabind properly on slackware, or I guess any distro. I have not been able to build it for the last hour and it has really made me angry. It seems everything lua pisses me off, because they really like not to use any sane build system.So far I've tried doing what they said, and I got the boost source both from the link they provide and from the slackware source directory. The one they provide make a jam0, which looks for a Jamfile, which does not exist. The one from the slackware source directory does make a bjam, but when I run it it looks for boost, not for luabind. It's just madness. If only I could get in touch with the luabind devs so I can curse at them and send them hatemail.

View 13 Replies View Related

Slackware :: NVIDIA X86-256.44 Fails To Build Against 2.6.36

Oct 22, 2010

here is the output:

[code]...

NVIDIA x86-256.44 fails to build against 2.6.36

View 13 Replies View Related

Slackware :: Unable To Build From Slackbuild In 13?

Jan 28, 2010

I installed slackware 13 reacentlyi was trying to build wvstreams and wvdialwhen i give the ./wvdial.Slackbild it runs for quite some time and at the end while creating the package it gives me an error cannot find gzip compression utility in $PATH. and there is no tgz or txz package in /tmp folderthen i ran pkgtool and found that gzip isnt installed. the i installed it from the slackware dvd. but still i am getting the same error

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved