Ubuntu Security :: Script Running As A Special Build User Which Performs An Automated Build That Fails With (Too Many Open Files)?

Feb 11, 2011

I have an init script running as a special build user which performs an automated build that fails with (Too many open files).I updated /etc/security/limits to allow the special user more open files, but that didn't work - the init script still isn't allowed more open files.Here's a demonstration of the problem;

Code:
$ su - sbsbuild -c "ulimit -n"
Password:

[code]....

View 1 Replies


ADVERTISEMENT

Software :: Self Build Rpm Fails With Missing Dependencies On Build Host?

Sep 24, 2009

as I'm advancing in building some nice rpm I finally wanted to install on of my gems also the build was successful the actual install fails with missing dependencies.

Code:

$ rpm --root /home/sascha/rpmbuild/ -i ./RPMS/x86_64/memcached-1.4.1-2.x86_64.rpm
error: Failed dependencies:
libc.so.6()(64bit) is needed by memcached-1.4.1-2.x86_64
libc.so.6(GLIBC_2.2.5)(64bit) is needed by memcached-1.4.1-2.x86_64

[code]....

View 1 Replies View Related

OpenSUSE Install :: Build A Multiseat System (Build A Six-headed Six-user System LG #124)

Oct 1, 2010

I am trying to build a multiseat linux system(Build a Six-headed, Six-user Linux System LG #124). I am posting some outputs output of lspci | grep VGA

Code:
00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
02:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 8400 GS] (rev a1)
ls /dev/input/mouse*
Code:
/dev/input/mouse0 /dev/input/mouse1 /dev/input/mouse2
more /proc/bus/input/devices

[Code]...

I am having trouble in configuring xorg.conf. I am running Suse 11.3 desktop on my PC. Also, I have one onboard nvidia graphics 6150SE and I have put one nvidia 8400GS 512Mb in the 16X PCIe slot for the additional seat...

So kindly tell me what should I do now or what things are missing ?? For any further info abt my PC plz tell me to post outputs(specify the commands for the same..)

View 11 Replies View Related

Ubuntu :: Make A Automated Build-script With Bash

Apr 13, 2010

I'm trying to make a automated build-script with bash but i keep getting different errors.

Code:

#!/bin/bash
gpg --import /home/epm/first_installation/config_chroot_sources_local.gpg
gpg --import /home/epm/first_installation/config_chroot_sources_packages-inl-fr.gpg

[code]....

View 5 Replies View Related

Programming :: Make A Automated Build-script With Bash?

Apr 14, 2010

I'm trying to make a automated build-script with bash but i keep getting different errors that I can't seem to figure out. Could anyone please tell me what's wrong with this package of build-scripts? I'm posting the main build-script and attaching the rest of the scripts in a compressed form. The errors mainly comes from the scripts in "/first_installation/usr/share/siem-live/init"

[Code]...

View 2 Replies View Related

Programming :: Make An Automated Build-script With Bash

Apr 14, 2010

I'm trying to make a automated build-script with bash but I keep getting different errors that I cant't seem to solve for various reasons. what's wrong with this build-script? I'm posing the main build-script and attaching the rest of the scripts in a compressed form. Buld-script link: [URL]

[Code]....

View 3 Replies View Related

Ubuntu Security :: Programs Running Among Ubuntu Build To Assure Secure Transaction

May 7, 2011

yesterday I ordered some software on the Net.Early this morning, I got a call from my bank someone else tried to charge to my debit card.I called the company I ordered from to alert them and they assured me it had to be my computer security because theirs was checked, upgraded regularly and above reproach.Fortunately, the bank caught it in time and my account wasn't debited. After I assured them I didn't order anything from Bed, Bath and Beyond, the bank shut down my card and I had to apply for another.

I was shocked. You hear about it but never imagine it will happen to you. I began to wonder and worry if it was because I was using Linux and it wasn't as secure as Microsoft.I'm isolated in a very small town in West Texas so I order some things on the Net.I loaded the full version of Ubuntu "Lucid Lynx" 10.04 from a 4 disk set and downloaded all the upgrades; almost five hundred and set everything up the way I wanted. My question is: Are there programs running among the Ubuntu build to assure a secure transaction on the net or do I have to load others and a fire wall like Windows? That's one of the reasons I left Microsoft behind was the "Auntie-viral" programs took over and almost became a competing system.

View 9 Replies View Related

OpenSUSE :: Find All The Build-deps Or What They Are For That Matter To Build Boxee

Feb 20, 2010

I'm in love with my Opensuse 11.2. Love my KDE 4.4. The only thing I miss from my Ubuntu installation, is the ability to use Boxee. I would be more than willing to compile Boxee from source. I only have 2 problems with that:

1) I don't know where I can find all the build-deps or what they are for that matter to build Boxee.

2) I'm running on a Netbook. Yes, my measly Intel Atom is no fun for compiling and building.

What are my options/what can I do to get Boxee up and running on 11.2? I've tried searching on build service for an RPM, but I think due to legal restrictions, Boxee can't be on there.

View 9 Replies View Related

OpenSUSE :: Build Libevent-dev 2.0.10 In Ooder To Build New Version Of Transmission?

Feb 16, 2011

looking for LIBEVENT... configure: error: Package requirements (libevent >= 2.0.10) were not met: In order to build transmission 2.21.I need libeventnew version of transmission,I need to build libevent-dev >= 2.0.10 and installed first.But I can't get any information about building development files for libevent.

View 1 Replies View Related

Slackware :: Install The I386 Build On One Partition And The 64-bit Build On Another

Sep 16, 2010

Trying to install SW 13.1 (on DVD) on the following system: M/B Intel: DX38BT Processor Intel Core 2 Quad Q6700 - 2.66GHz, 8MB Cache, 1066MHz FSB, Socket 775 Memory Corsair Dual Channel 8192MB PC10600 DDR3 1333MHz Memory (4x2048MB) Graphics Diamond Radeon HD 3850 Video Card - Viper, 512MB GDDR3, PCI Express 2.0 P/S Ultra 1000W

My goal is to install the i386 build on one partition and the 64-bit build on another. I have been away from Linux for a while and am sick to death of Win7, want to come home. :-}

Booted on i386 side of DVD, system freezes after a couple of lines that start with ATA2. Does not respond to 3 finger salute, ctrl-c, nothing. Have to press reset. I have tried both huge.s and hugesmp.s kernels

Booted on 64-bit side, comes up fine. I performed the install, selected for automatic lilo install. Lilo install hung but I was able to reboot. I booted off the 64-bit side again, entered the following: huge.s root=/dev/sde3 rdinit= ro It booted fully to the login prompt but the keyboard does not work, no input.

View 2 Replies View Related

OpenSUSE :: Ant Build.xml Does Not Exist - Build Failed

Apr 19, 2011

Ant was installed in yast2 but will not run since build.xml was never created. How can this be fixed? I would like to run AudioTool.

View 5 Replies View Related

Fedora :: Can't Build Rpm - Rpmbuild Fails

Mar 4, 2010

recently i have been building my own kernels, and have been successful. however, over the last 2 days, using the proper documentation and methods i always get to the same point that rpmbuild fails at. it's very frustrating to say the least...i am somewhat new to fedora, as i tend to use debian-based systems or freeBSD, where the approach and methodology is quite different to that of redhat. the command used:

rpmbuild -bb --with baseonly --with firmware --without debuginfo --target=`uname -m` kernel.spec

this builds the kernel with modules(needed by me) and this is where it fails:

[Code]...

if anyone has fix let me know, i can't update or upgrade rpmubuild without doing so to my whole system, so i hope this isn't a bug in rpmbuild.... i already had to upgrade yum & yum-utils because of a bug that wouldn't let "builddep" work. (come on fedora, this is a standard release, i shouldn't be having problems with yum or with rpm! this is apart of the OS's core isn't it? anyway, if someone who is in the know has a solution

View 2 Replies View Related

Slackware :: Easystroke 0.5.3 Build Fails

Jun 23, 2010

using slakware64 13.1 modified sbo slackbuild for latest version..

View 7 Replies View Related

Slackware :: KDE 4.5.4 Bindings Build Fails

Dec 4, 2010

I'm trying to build/install KDE 4.5.4, but I run into problems with the bindings package. Build fails with the following:

[Code]....

I'm building using the KDE slackbuild from sources dir, with the new KDE packages. edit: Well I decided to just take the risk of a not working KDE and commented out the bindings package. All other packages build fine. After this I crossed my fingers and rebooted, KDE loaded up. I gave the bindings package another go, and to my surprise it did build now. Got KDE up to date and it seems to be running fine.

View 6 Replies View Related

Slackware :: NVIDIA X86-256.44 Fails To Build Against 2.6.36

Oct 22, 2010

here is the output:

[code]...

NVIDIA x86-256.44 fails to build against 2.6.36

View 13 Replies View Related

Fedora Servers :: Build Of Apache 1.3.41 Fails On F12?

Jan 9, 2010

I'm trying to move an existing webserver from an old machine to a machine with Fedora 12 installed on it. ThSince the version available in the repository is version 2.X I downloaded the source from apache.org and tried to compile it. I ran configure using the default options and it an without any warnings or errors. However when I run make it fails with the following error:

gcc -c -I../os/unix -I../include -DLINUX=22 -DHAVE_SET_DUMPABLE -DUSE_HSREGEX -DNO_DL_NEEDED `../apaci` htpasswd.c
htpasswd.c:101: error: conflicting types for getline
/usr/include/stdio.h:653: note: previous declaration of getline was here
make[2]: *** [htpasswd.o] Error 1
make[2]: Leaving directory `/root/apache_1.3.41/src/support'
make[1]: *** [build-support] Error 1
make[1]: Leaving directory `/root/apache_1.3.41'
make: *** [build] Error 2

what the problem and more importantly the solution to this problem is?

View 9 Replies View Related

Software :: Libc6 Debian Build Fails?

Feb 18, 2010

I am using my athlon64 machine running Debian squeeze i386 to build some packages optimized for a K6-2 machine. I decided to start with libc6 since most packages depend on it.

I installed the build dependencies via

Code:
apt-get build-dep eglibc

Then, as an unprivileged user, I downloaded the debianized source via

Code:
apt-get source eglibc

I changed to the source directory and ran

Code:
dpkg-buildpackage -rfakeroot -us -us
About 6 hours later, the build failed: [URL]

There were four config.log files:

Code:
./build-tree/i386-xen/config.log
./build-tree/i386-i686/config.log
./build-tree/i386-libc/config.log
./build-tree/i386-amd64/config.log

All of which end with exit status 0. They are also about 1600 lines each so I haven't read them entirely. If someone can tell me which one/ones is/are relevant, I will post it/them to a pastebin.

View 2 Replies View Related

Slackware :: Build Fails In Current: Gtkimageview-1.6.4?

Feb 14, 2010

I can not get gtkimageview-1.6.4 to build in current. It fails with a number of errors of type:

Code:
gtkanimview.c: In function 'gtk_anim_view_get_type':
/usr/include/glib-2.0/glib/gthread.h:339: error: dereferencing pointer 'value_location.1' does break strict-aliasing rules
/usr/include/glib-2.0/glib/gthread.h:339: note: initialized from here

View 2 Replies View Related

Software :: Package Gpart Fails To Build On Powerpc?

Apr 17, 2010

Question is: How do I compile a package for little endian on big endian proceessors? Gpart is known to build on arm-el, ia64, i386, and amd64. I'm using gcc 4.3 and have versions 3.4, 4.1, 4.2. Build environment is debian lenny, powerpc.

View 4 Replies View Related

Slackware :: VirtualBox < 3.1.4 Module Build Fails On 2.6.33 Kernel

Mar 4, 2010

I had an issue with the module build for vbox 3.1.2 breaking on the latest kernel ( /etc/rc.d/rc.vboxdrv setup ). Apparently the issue is that a kernel header (autoconf.h ) has changed its location in the module tree and hence the issue.

2 options:

1. upgrade to 3.1.4

2. create a symlink as follows

cd /usr/src/linux/include/linux
ln -s ../generated/autoconf.h autoconf.h

View 12 Replies View Related

Fedora :: Akmods Fails To Build VirtualBox-OSE Driver For Kernel 2.6.40-4

Aug 2, 2011

I had no problems up to the newest kernel version. But for 2.6.40-4 akmods fails to build the kmod with the following error:

Code:
Building RPM using the command '/usr/bin/akmodsbuild --target x86_64 --kernels 2.6.40-4.fc15.x86_64 /usr/src/akmods/VirtualBox-OSE-kmod.latest'
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/akmodsbuild.yob64XwN/BUILD/VirtualBox-OSE-kmod-4.0.4/_kmod_build_2.6.40-4.fc15.x86_64/vboxnetflt/vboxnetflt.mod.o
LD [M] /tmp/akmodsbuild.yob64XwN/BUILD/VirtualBox-OSE-kmod-4.0.4/_kmod_build_2.6.40-
[Code]...

View 13 Replies View Related

Fedora X86/64bit :: Build Mandrivas Theme Ia_ora From Source But It Fails

Feb 13, 2011

Im trying to build Mandrivas theme ia_ora from source but it fails.

Code:
sh install.sh
-- Found Qt-Version 4.7.1 (using /usr/bin/qmake-qt4)
-- Found X11: /usr/lib64/libX11.so
-- Found KDE 4.6 include dir: /usr/include/kde4
-- Found KDE 4.6 library dir: /usr/lib64/kde4/devel

[Code]...

View 2 Replies View Related

Ubuntu / Apple :: Build 10.04 Desktop Running Through VMWare Fusion?

May 4, 2010

I've always been interested in Linux and it seems that the new version of Ubuntu (10.04) is pretty good. Now I want to build an Ubuntu desktop to use as my main computer. I've been running it through VMWare Fusion and I haven't had too many problems at all on my iMac (27" i5). Unfortunately, I still need my iMac since the new Steam client is coming out for OS X and I must have some of my Steam games. I guess I don't mind running it in VMWare, but I do miss the excitement of building a new computer with a nice case and fans, and throwing a fresh clean OS on it. Anyone else been in the same dilemna? I feel though I have spent enough money on computers recently. Plus, I don't have room on my desk for another widescreen monitor. I'm not sure where I would put my iMac.

View 3 Replies View Related

Ubuntu :: Build Some Form Of PC Capable Of Running Basic Dev Tools / Scm?

Feb 14, 2011

I need a dev setup which is external to the box I work on at home. I.e. I need to build some form of PC capable of running basic dev tools / scm.Given its very basic needs, was thinking of finding a fanless, probably atom based, micro-itx solution. I.e. small, silent, can just sit somewhere all day with a nightly backup to a NAS. (it would be really cool then as well because I can throw it in a bag and take it places when I need to -- its wrong I get excited about that...).Just wandering if anyone has done anything similar?lightly worried about the performanceWas thinking something like the Shuttle XS35GT:but have a gut feeling I could build something better for 2/3's the price.

Friend suggested buying a simple netbook as its probably one of the cheaper ways to getting an atom powered system, and has a screen for setup. ll it needs to run is a web server, SVN/GIT, Trac, maven, hudson and artifactory. I.e. it does not need to be capable of streaming video content etc (i.e. its not a media box) for 1 user at a time. Projects are not going to be the smallest for home projects, but really in the grand scheme of things its going to be small.

View 3 Replies View Related

Debian :: Installing Kernel Sources - Make Command To Build Package Fails

Jul 22, 2010

I'm trying to build the package zaptel on debian, but I'm encountering two errors:
1- When I try to run the "make menuselect" command, I get an error stating that I need ncurses which is missing. I tried to get it installed but didn't get to do it yet.
2- After that, there's the command "make" I think it's to build the package. Yet again this fails, and the error I get is "you do not appear to have the sources for the 2.6.26-2-686 kernel installed".

View 3 Replies View Related

Programming :: Build Module Against Headers That Are Not From Running Kernel?

Apr 13, 2011

I'm trying to debug a module I programmed but I don't want to do it on the running host but against UML (don't want to reboot every 5 minutes).

The UML kernel I downloaded is 2.6.38.2. I have already downloaded the ubuntu kernel headers for this version (they belong to natty though I'm running maverick.... when I installed the .deb file with dpkg I had no problem at all).

Now I'd like to build said module against these headers. How can I do it?

Here's the makefile for my module code...

View 1 Replies View Related

Software :: Linking In A LKM To User Space In An Eclipse Project Build?

Jun 25, 2009

I have written a PCI LKM device driver that compiles and loads correctly via #insmod libfoo.ko. When # dmesg | less is run I get good results and no errors in the log. The LKM header file is visible in the eclipse workspace.how do I attach (link) this loaded LKM in a eclipse project so that the LKM driver functions are visable?

View 2 Replies View Related

General :: IDE To Build C Files?

Jan 18, 2010

I am trying to build an application on linux and it requires compilation of several files along with my application. Till now I have been trying using a makefile which is built for a test application which uses almost the same files as the mine by replacing its main.c file. But mow have ended up writing everything, function declarations, definitions... in the same file looks very unprofessional and is quite difficult to manage. an IDE to build this? I saw quite a few IDE's supported on linux but they are all appropriate for C++, GTK, java languages and not C.

View 6 Replies View Related

CentOS 5 :: Build A Bootable System Image On An Attached Hard Disk On A Running Machine?

Feb 27, 2011

I would like to build a bootable system image on an attached hard disk on a running CentOS machine.The hard disk would be moved to a headless server, where only SSH access would be available. It seems that all the documented install methods assume that the installation runs on the taget machine. In this case, I would like to create a bootable system image of CentOS on a running host system. The new install mage would generally have a newer version of CentOS than the running host system where the image is created. Also, I would prefer
to do a text-based install.

The reason for all this is that I have network access to several remote machines. I can ask disks to be moved between machines, but I have no physical access. In order to do software testing, I would like to have several system disks with different installed CentOS versions. It would be easer if I could build the system disks on one single machine. The hardware an all machines is very nearly identical.

View 1 Replies View Related

Software :: Build A Rpm To Copy 3 Libxx.so.0 Files To / Usr / Lib?

Oct 14, 2010

I need to build a rpm to copy 3 libxx.so.0 files to /usr/lib. I need to do this as I am building a custom fedora remix using FC12. I am very much new to write a pro spec file and I thought you could help me out. I wrote one as mentioned below

[Code]....

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved