OpenSUSE Hardware :: Available Resolutions Vary Depending If Monitor Is On Or Off When Starting System?
Aug 10, 2010
I just installed 11.3 in one of my computers and I've noticed the resolution was sometimes changing after a reboot. First it was switching from 1280x1025 to 1024x768 with the default deivers, then I thought installing Nvidia propietary drivers would solve the problem, but now is switching between 1280x1024 and 640x480. After several attemps to fix it I found out that the system uses the correct resolution if it starts with the monitor switched on, but falls back to 640x480 if it's off when the system boots, which is almost always since I usually control this pc trough vnc.
I Tryed to specify the available resolutions in xorg.conf, and adding the preferred mode option, but it didn't help. I tryed also to use xrand in .profile to force 1280 resolution, but it doesn't work either (when the system is started with monitor off, xrand only shows 640x480 and 320x240 as available resolutions, and so does the system preferences panel).
Here's the xorg.conf I'm using right now:
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:59 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
code...
View 7 Replies
ADVERTISEMENT
Apr 20, 2011
Today I bought a new monitor (IPS236V) to use it to watch movies and tv while I'm working on the other one.. I thought it's the best to activate Xinerama which could be done easy via CCC. But I'm not able to change the resolutions now as these panels are disabled in CCC. The first monitor is set to its native resolution, but the second is something lower.How can I configure both monitors to there native resolution?
View 5 Replies
View Related
Jan 29, 2011
I'm using Ubuntu 10.10 server edition on AMD 64-bit machine. When I try to open system monitor(system->administration->system monitor) it's not starting. Then i use console to open system monitor using command #gnome-system-monitor then it gave me the following error on the console.** (gnome-system-monitor:19279): WARNING **: SELinux was found but is not enabled.
*** glibc detected *** gnome-system-monitor: malloc(): memory corruption: 0x0000000000881d80 ***
======= Backtrace: =========
/lib/libc.so.6(+0x774b6)[0x7f1ec27054b6]
[code]....
View 2 Replies
View Related
Mar 23, 2011
I just installed Kubuntu 10.04. My monitor support up to 1680x1050 resolution but Kubuntu allows me to only choose up to 1360x768. How can I fix this?
View 1 Replies
View Related
May 13, 2010
I have two monitors of different resolutions. Under settings->display the settings for my monitor look like this: [URL]. Ultimately what I want is to set up this kind of configuration: [URL]. But whenever I do, it doesn't work out. When I up after setting the above settings, my configuration ends up like this: [URL]. Any attempt to change the resolution or to change the display type to anything other then clone is simply ignored. If I disable the second monitor I can set my first to the proper resolution. If I try to set the settings to what I want they will stick but the second monitor doesn't actually turn on, and if i try to drag windows that direction it acts like a single display.
I have tried using the ATI control panel to adjust my display, but there seems to be a problem entering it as an administrator.I can load the CCC just fine as a regular user, but when I try as an admin a terminal pops up, I type in my password, and nothing happens. I want to avoid trying to reinstall my display drivers or do anything drastic. In previous versions of linux I would just nano the Xorg.conf file and be done with it, but it seems ubuntu 10.04 LTS doesn't use Xorg, or at least not a Xorg.conf I am used to. I want to set the monitors at their native res and as independent displays, similar to what twin view did for me not to long ago.
View 2 Replies
View Related
Aug 7, 2009
I am somewhat new to CentOS, but I have read a lot of web pages and tried a good number of things trying to solve my own problem. I have made it worse a few times, but never better. I have an envision 1440x900 LCD monitor and a S3 Savage video chip on the motherboard. In System->Administration->Display->Hardware I am using generic LCD Panel 1440x900 and the video card is listed as "S3 Inc. VT8375 [ProSavage KM266/KL266]. I believe both of these to be correct. I have added the mode to my xorg.conf
The problem is, under System->Preferences->Screen Resolution, the mode 1440x900 does not appear. The highest resolution is 1280x768. Does the S3 Savage just not have the ability to produce 1440x900?
[Code]...
View 7 Replies
View Related
Jul 8, 2011
I recently got a new external monitor for my laptop, and connected them by VGA. This is what 'xrandr' tells me:
Screen 0: minimum 320 x 200, current 1440 x 900, maximum 4096 x 4096
LVDS1 connected (normal left inverted right x axis y axis)
1280x800 60.0 +
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 connected 1440x900+0+0 (normal left inverted right x axis y axis) 510mm x 290mm
1920x1080 60.0 +
1600x1200 60.0
1680x1050 60.0
1280x1024 75.0 60.0
1440x900 75.0 59.9*
1280x960 60.0
1280x800 59.8
1152x864 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1
However when I try to change to some of the higher resolutions, such as 1920x1080, all I get is a corrupted and flickering image. As indicated above, I am currently on 1440x900@59.9h,z but for some reason 1440x900@75hz doesn't work. The same seems to be true for 1280x1024. The three resolutions above that all cannot be selected properly. I tried setting the resolution to maximum in Windows XP and it worked, and my video games console can set it to 1080p, so I don't think there is anything wrong with the monitor. Is there anything I can do or is this some kind of bug or limitation of the graphics driver or something? The graphics chipset of the laptop is an Intel 945GM, which I believe should be capable of displaying 1920x1080. I am running debian unstable with what seems to be the most up to date version of xserver-xorg-video-intel.
View 2 Replies
View Related
Jan 24, 2011
first time poster after having read gobs of threads trying to find the answer to my issue here. I'll try to post as much information as I can, and then will supply whatever else is inevitably left out and deemed necessary. I'm running 10.10 on a Gateway MX3701 laptop which has an ATI Radeon Xpress 200M graphics controller (lspci | grep VGA) and am hooking it up to my Samsung P2770HD monitor/TV via VGA (VGA-0 port if that's important).
So, the issue: In resurrecting my old laptop by killing XP and putting on Ubuntu, I found I needed a VGA cable to connect to my monitor. Borrowed a friend's to get my setup going, and all was well in 1920x1080 with all the other monitor settings working well too (laptop monitor off, etc.. When my new VGA cable (cheap from Amazon) arrived and I shutdown, made new connection, and rebooted, my monitor was no longer recognized (it was before) and I am limited to weak sauce resolutions meant for my blinding grandmother.
So I've tried to find similar issues on here and have struggled to do so. I did find one thread that was similar, but the issue was never resolved.
View 2 Replies
View Related
Jul 17, 2011
I just installed Natty (11.04) on an old computer for my disabled brother with:
* Video Card:
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
* Monitor:
VGA Mitsubishi Diamond Pro 750SB (old CRT monitor)
The problem is that when I select System -> Preferences -> Monitors, the monitor is shown as unknown and it only allows me to set 1280x1024 (shows 0Hz as display refresh rate) which is way too high for my brother. I was wondering if there's a way to select the proper monitor from a list so all display resolutions are shown and I can select a lower one for him.
View 8 Replies
View Related
Oct 31, 2010
I have been tasked to set up 2 monitors on SUSE Linux Enterprise that are a clone of each other, but each displaying different resolutions. The primary display has a max resolution of 1024x768 while the secondary display has a max resolution of 800x600.
The problem comes when the secondary display shows a "cropped" version of the desktop. Is there anyway to show different resolutions on each display while maintaining the proper desktop look?
[Code]...
View 4 Replies
View Related
Oct 29, 2010
I am not sure if this is the correct forum to post this topic (I was struggling between hardware and software). But since I do not think this was a problem with my hardware(monitor), I decided to post it here.
I have been tasked to set up 2 monitors on SUSE Linux Enterprise that are a clone of each other, but each displaying different resolutions. The primary display has a max resolution of 1024x768 while the secondary display has a max resolution of 800x600.
The problem comes when the secondary display shows a "cropped" version of the desktop. Is there anyway to show different resolutions on each display while maintaining the proper desktop look? I have attached the relevant portion of my xorg.conf.
[Code]...
View 6 Replies
View Related
Nov 2, 2010
I have a HP mini 5101 wit OpenSuse 11.2. Unfortunately, I wanted to have a newer version 11.3, but I upgraded in a wrong way and the system not started any more, failed in start-up level 5 and ran the Kernel. I tried to find the solution, searched on google, but I think made it worse (personal feeling): made some changes in xconfig. Of course, the problem remained. Then I decided to make a system recovery. Everything was OK, until the last step, when the system prepared the first login. I saw this message for a few seconds:
Code:
*** Starting Yast2 ***
basename: missing operand
Try 'basename --help' for more information
SPP: could not open file: at /usr/share/sax/modules/SPPParse.pm line 61
When I switch on my netbook, during the loading everything seems ok, after loading I see the background but no login window, nothing. I don't know what's the problem.
I started the system recovery again and again. In few times I saw this on screen for a second, then return the background:
[Code]...
View 6 Replies
View Related
Dec 30, 2009
Is it possible to install 1 more language in openSUSE, and then, one user to use one, another user to use another? I mean, when I login, I want english, and when my mother logins, to be Serbian/Croat?
View 3 Replies
View Related
Jan 30, 2011
1. I need to mount SAN blackarmor share at boot. I can do it manually. But I need it mounted everytime. So I introduced it into fstab. No result. See my fstab below.
Code:
//192.168.1.3/Public/home/pawel/black-publicautoauto,rw,user="myuser",password="mypassword"00
I wonder what type of filesystem shall I use. Manuall mounting works with no fs spec, if smbfs or nfs is pointed it makes error.2. When I boot and loging in run level 5 straight into gnome desktop I've got different privileges, expecially to USB devices and sound system (I can not play on my external sound card). How can I control this behaviour. Let's assume that I want to stratx from level 3 as regular user and want to have all this automatic privilleges for hot plugin USB devices and automatic access to sound system. Is controlled by gnome?
View 9 Replies
View Related
Jan 30, 2010
GNOME system monitor is constantly freezing and not responding when i click on first tab 'System' Do somebody knows some workarounds for this issue? It's the same on freshly installed system and also on updated GNOME 2.28 from stable repository.Sometimes on second or third atempt it is working, but i cannot accept such an level of unstability and bugs, discovered on daily basis of testing openSUSE 11.2. There are much more very basic issues in this release which are normal for beta stage, but not for almost 3 moths old system...
View 2 Replies
View Related
Feb 2, 2010
I`m running openSUSE 11.2, with GNOME 2.28 - made a fresh install.
Everything went smooth and nice, and I did not made any changes to my system, when I saw that GNOME System Monitor freezes when clicking on the "System" tab.
View 6 Replies
View Related
Apr 1, 2010
Im running 11.2-64 with the stock KDE (3.5) included with the distro. Recently I messed about attempting an update of Amarok and phonon to get the graphic EQ back for music playback. The "messing about" was not with the one click install offered on the KDE website for 4.4.2.....and interestingly the messing about was the day before they "released" 4.4.2-- with the result that I ended up. trashing" the system and having to reload (didnt loose /home tho another reason why I love SUSe....)anyway I ve been looking around and have seen problems mentioned on the KDE forum with multi monitors in their 4.x desktop environment....it is tempting to "just push the button" on the 4.4.2 install and see what happens but Im not sure I want to spend another few hours here repairing things where I have my workspace back.
This machine is used in my home office, a core quad with 2 GB of RAM, Intel motherboard and a pair of NVidia GT 8500 PCIe cards running 3 monitors..... am curious if anyone is using 4.4.2 in a multi monitor environment, how the upgrade went and any problems with X server with the new environment?
View 5 Replies
View Related
May 11, 2010
I have a system with 1 GB RAM. I'm running KDE 4. I created a tab to look that the Physical Memory in the System Monitor program, which I assume appears to look at the same stats that "top" looks at. In that Physical Memory tab I have 3 tables: Used Memory, Free Memory, and Application Memory.The Used Memory table shows that the system is using .94 of .98 GiBytes. The Free Memory table shows that the system has .5 GiBytes of RAM free.
However the Application Memory shows that only 339 M-Bytes of RAM is being used.Note that "top" shows the same info.So where is the other .6 GiBytes of RAM that the Used Memory table shows as being used?If I look at the process table which is supposed to encompass all of the processes running, including the ones for the OS, then it appears to add up to the 339 M-Bytes being used in the Application Memory table. Is the rest of the memory being held in reserve by the OS to be used as needed? If so, then why when another application is opened the Free Memory goes down instead of staying constant?I also noticed this memory "black hole" when I was running 11.0 on a system with 4 GB of RAM. The OS appeared to "take up" a large chunk of memory that was NOT being used by any applications and making it "disappear" - meaning that the applications were using about 1.3 GiBytes of RAM and Free Memory was showing only .7 GiBytes instead of the over 2 GB of RAM that should be free.
View 2 Replies
View Related
Dec 20, 2009
Basically system monitor and the "top" command show 2 cpu cores when I only have 1 (a 3 Ghz P4 on my work computer).
I'm not sure if the two are related but I frequently get 100% CPU usage when running a few programs together (Kile, Firefox, Chrome and okular for example) at which point even the movement of the mouse cursor slows down.
View 2 Replies
View Related
Apr 26, 2010
I'm downloading the iso images for 9.10 Alternate CD. As the desktop does not work, graphical. For whatever reason even once it starts to boot live (With no direct install) it says in the "boot terminal" (non-graphical, full screen) as I call it "Authentication Failure even bEFORE the actual program is loaded. Asks me for username / password which does not exist, etc. I'm sick of windows. I used Ubuntu for about a week and fell in love.
Windows is poppy-cosh, compared to the speed, performance, customization, updates, few errors and bugs, everything is superb! I already converted my fiance and best friend to using the OS in Dual-Boot I'll be an avid supporter and do even more using my media company to help promote xD What's the point? Wine allows me to use all the programs I need that require windows, regardless.. You have converted me. "If you build it, they will come." Amazing job.
I tried re-installing windows and to no-evail for whatever reason screwed up my entire re-installation of Ubuntu. Instead of saying Owner it says Administrator for the new install. Here's my list:
1.) I need to completely wipe out all partitions and start over with a "fresh" HDD. Any ideas how to do so without an OS? It was suggested on wiki answers to use BootDisk.com
2.) I have the torrent downloading which is 689.6MB [URL] and the normal ISO which is 690MB [URL] from two different Ubuntu.com pages...Which do I use? Why are they two different file sizes? I assume the larger file size is the best to use. This has happened when downloading the Desktop CD as well. The lesser file never worked properly. Do you guys have incomplete files on the server or something or perhaps just my hardware?
3.) Use alternate installer to have Ubuntu as the ONLY OS. Alternate Option: Put Ubuntu alternate cd installer onto my external HDD by Seagate and boot up to it, then install ubuntu...
View 5 Replies
View Related
May 4, 2011
I have been trying to configure dual monitors of different resolutions on 11.4 the Nvidia configuration utility does not know where or what to save anything anymore and goes wonky. Trying to use it is a dead end for me. X11 is a mess. What happened to SAX and things like this that were part of openSUSE and just worked? Supposedly we X11 got better. I think it's got over complicated and much worse. This stuff just worked in 11.1 and KDE 3.
View 9 Replies
View Related
Jan 30, 2011
Just bought a new 1080p monitor (1920x1080) and it works fine in OpenSUSE 11.3. Problem is before I get the KDE start screen everything is not full screen. Now, I checked the rest of the forums and I cannot find a full list of widescreen or 16:9 grub resolutions.
Does anyone have a list of what's supported?
View 9 Replies
View Related
Oct 16, 2009
I am facing problem with the fresh installation of Fedora 11. (I have moved from Fedora 9). When I try to view videos on ..... or use the Cheese Webcam Booth, I get blurred lines on the screen and I am unable to see any video or pic.
Also I noticed that the when i go to System > Preferences>Display, it shows me UNKOWN MONIOR.
However, if I got to System>Administration>Display and enter the su password, it shows me correct monitor and the graphics driver.
I am not sure if my original is related to the Unknown Monitor.
I also tried to install Nvidia driver but it crashed the xserver and I had remove the driver.
My Monitor is LG 700E and Graphics card is from intel. as I am not able watch any video.
View 5 Replies
View Related
Jan 24, 2011
One day, when I switched on my notebook Lenovo X400 with Suse 11.3 I observed that the graphical login screen is divided vertically into two equal parts - each in different resolution. There are also two mouse pointers. They work simultaously (eventhought I can see only a half of each). The problem is that when I login there is no effect, it goes back to login screen. I can login into text terminal. But if I go to "init 3" I still can not startx and the next time I reboot the same problem comes again. Shall I somehow reconfigure X windows or method of logging in?
View 9 Replies
View Related
Mar 10, 2011
Just did a new install of 11.4 over top of my 11.3 and when I reboot into the OS it seems to boot just fine but the video is unreadable. When I boot into the failsafe the screen has a lot of gitter and the monitor tells me it's not in preferred mode of 1680x1050 at 60hz. All resolutions higher than 1280x1024 are unreadable. Tried booting nomodeset as I've read previous ... no luck. I'm still learning linux.
View 9 Replies
View Related
Jul 18, 2010
Recently the power went when i was using ubuntu and my system shut down since the ups took too long to supply power. So i started my system and choose to boot linux, but it said display drivers not detected, linux running in low graphic mode, and it said 1. run windows in low graphic mode for now...2. reset to previous graphic mode- i chose this and it restarted, since then the ubuntu loading page appears and then my monitor goes blank although my processor is running.....why is this happening?.....i have a ati 5770 graphic card through which it should display.
View 3 Replies
View Related
Sep 20, 2010
Basically every time I boot into Ubuntu any sound will be vary loud until I move the volume slider, it doesn't matter how much I move the slider as long as it moves then all sound will play at the normal volume and volume control works like it's suppose too until I reboot. This problem started in 9.10 and still happens in 10.04 and 10.10(as of a couple days ago).As far as I can tell the issue only exists in Ubuntu, doesn't happen in Fedora(Gnome), OpenSuSE(KDE) or Kubuntu.Running 10.04.1 32-bit, Logitech Clear Chat USB Headset, don't have any speakers.
View 7 Replies
View Related
Feb 23, 2010
I have persistent video tearing my second monitor (Mitsubushi HDTV). I have tried everything that was suggested with some improvement. I have no issue with tearing if I add the following to my xorg.conf
Quote:
Section "Extensions"
Option "Composite" "Disable"
EndSection
Is it possible to disable composite for one monitor only and keep it for the other. Or at lease is it possible to have compiz for one monitor only and disable it for the other.
View 2 Replies
View Related
Nov 17, 2010
When booting the system ,"starting system logger : Failed" after that i login to the system as usual but the system logger cannot start,even i use the service syslog restart command,how can i solve such problem ,thanks a lot
View 1 Replies
View Related
Jul 18, 2011
I installed OS11.4 on my old laptop, Compaq Armada E500., 512MB RAM, ATI Rage Mobility. During installation I chose "minimal server" and added some development packages, lxde and a little more. I chose to start in runlevel 3 which is full networking without X. Still, when computer is booted it tries to start Xorg which doesn't work because of some problem w driver. The start-up seems to stop there, it never loads completely - seems most things in runlevel 3 are not started (see below) I can manually login on laptop and fix it - but never permanently, same thing again after reboot.
I have checked /etc/inittab & yast - both states default runlevel is 3. I have checked services to be started both directly, browsing directory /etc/rc.d/rc3.d/, and with YaST, it is very clear X should not load during boot. But, as said, it does.. I don't really care about the driver problem right now, I can fix that later when I have more time. So how do I stop X from getting started automatically?
More info, if needed: The installation also stopped with message on tty1 "Starting YaST2" and tty8 showing errors with graphics driver (mach64). The system seemed to be installed though, so I simply rebooted (issuing "reboot" from tty2).
[Code]....
I'm not completely sure where it stops, network is configured but keyboard is wrong and mysql & everything after is not started, so somewhere between S02network and S06kbd. I'm going to use it as a server for testing purposes so no X is actually needed - however I do want to have X & lxde installed just in case, my Internet connection at home is terribly slow so I need most things I might need in the future installed today.
View 1 Replies
View Related
