I was looking to get glx to work with direct rendering. So i installed the nvidia drivers from the openSuSe Sight. I installed because /var/log/Xorg.O.log Said that the Nvidia card was not loaded. Long story short looks like the card is loaded but X windows... I guess GLX is not running and neither is Opengl. I still have output to the monitor. here is
[Code].....
I have unfortunately found myself unable to properly boot up openSUSE because I decided to buy the Acer Aspire with the i5 Processor.
I have the Intel Graphics Media Accelerator HD (GMA HD) graphics card, and unfortunately from all my searching online and on openSUSE, I have been unable to find a driver for this that works for linux, and in addition I don't know how to install a driver outside of a GUI.
My openSUSE boots up to the boot choosing screen (regular openSUSE or failsafe), and then that nice list of functions being done is displayed, but as soon as the daemon has started, suddenly my screen goes blank and I am unable to do anything about it. Beyond this point, my OS loses all functionability, and while I can hear it computing, I am unable to actually tell WHAT it is computing. get a driver for this and to install this driver and get this GUI running, that would be great.
I have a z9 volari Graphics card that opensuse 1.2 is recognising but the xgi driver is not present. I get the following when I startx:
auth: creating new authority file /root/.serverauth.4650
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
[Code]....
Perhaps my last post about this was too long and hence why nobody responded. So i will try and keep it simple and let the experts advise me.
I have tried installing an rpm that I got from rpm search. Namely xorg-x11-driver-video-xgi-1.5.0-6.1.i586 which seemed to install but when I did a query it said it was not installed, but when I tried to do an install again it said it was already installed ??
There is also a file called xserver-xorg-video-sis_0.9.3.orig.tar.gz which i got from this site. I have not managed to extract it properly yet but will look into that myself. It appears to have in it a makefile, so I presume it is source files and I could really do with some help in that.
I was trying to get the package ready to install my Graphics card to the new update. This is the problem that I am having.
Code:
Problem: nothing provides kernel-devel = 2.6.35-21 needed by kernel-syms-2.6.35-21.1.x86_64 Solution 1: do not install kernel-syms-2.6.35-21.1.x86_64 Solution 2: break kernel-syms by ignoring some of its dependencies Choose from above solutions by number or cancel [1/2/c] (c): c Now the vanilla kernel is 2.6.35-21 were as the "default" opensuse one is 2.6.35-20. I have googled and told opensuse download search engine to look for the 2.6.35-20. I cannot find it at all.
If I upgraded to the vanilla kernel without the opensuse patches would it make my machine unstable? Or can I tell it to break some of the dependencies?
I recently installed SuSE 11.1 (64 bit) on my system
AMD Phenom II 940 3.0 Ghz;Biostar TA790GX 128M Motherboard with ATI Radeon HD 3300 Graphics card built in;
4 Gb (2*2 sticks) DDR2 800 MHz RAM
The installation went smoothly, But on first restart and login (and subsequent ones too!) I get a light purple screen with a skyblue box at top left corner, with xconsole written on it. when I Left click anywhere on the screen, I get a popdown with a number of options, of which only XTerm (bash shell) and exit (logout) options work. Now I know the HD 3300 graphics card drivers are not built into the SuSE 11.1 distribution, and I have already downloaded them (Linux ones)from ATI website. I login as Superuser, and type init 3 to go to a very basic screen,login as user, change to superuser again and then run the following file i downloaded from ATI:
sh ati-driver-installer-9-4-x86.x86_64.run
The result/output at the command prompt:
Created directory fglrx-install.ubanI5
Verifying archive Integrity... All good.
Uncompressing ATI proprietary linux driver-8.602...
.....(lot of dots)...
ati-driver-installer-9-4-x86.x86_64.run: line 295: ./ati-installer.sh: Permission denied Removing temporary directory: fglrx_install.ubanI5
Once again, i tried everything in superuser login.
Also I tried making changes via sax2 command, it doesnt seem to work. A window opens where I see that my graphics card has been detected but thats about it. nothing else in that option, everything is greyed out (nothing to be selected)
I did not find my graphics card in the HCL/Nvidia video cards thread. I looked in YaST for drivers & found none. My desktop pc freezes after the system loads so I cannot use my system. I understand about the level '3' boot option for tty input. How would I download/run the nvidia installer from tty?
View 4 Replies View RelatedI have an HP Pavilion dv6-2120ca and I'd like to find out where to find the graphics driver. This is the card: TI Mobility Radeon HD 4200 Graphics I plugged in my MP3 player in and it worked with Opensuse.
View 2 Replies View Relatedthe solution of my monitor is much to small. So I tried to find out, where I can change the settings of my graphic card and monitor. Unfortunately opensuse only gives me the possibility to change it up to 600x800, which is by far too small. So I thought maybe I need to install a driver... so... there I am ... having question marks around my head and wondering how to install a graphics card driver on my opensuse 11.3.???
And where to find the right ones?
My graphic card is a Matrox Mystique (no 220 or anything else!!). I checked the website of Matrix to find my drivers, but it tells me that there is no driver planned for linux. Matrox Graphics - Support - Latest Matrox drivers for legacy products But I guess I am not the only person in the world who uses this graphic card on linux, so there must be a way to make it work!!
I have opensuse 11.3 installed, and my motherboard has the intel i845 chipset,
one day windows had enough of the intel graphics chip and would not let me have anything but 640x480 pixels, well you cant do much with that so I put an ati card in and disabled the intenal graphics. windows was happy enough but suse could not boot - more specifically could not mount the root filesystem, saying it had errors (did a very quick fsck), could not find the journal, and I had a bad superblock. the "failsafe kernel" was no better. If I take the ati card out suse boots fine. however I do swap frequently between windows and linux and changing graphics cards between boots is somewhat irritating.
Would a Nvidia Geforce 4 graphics card be supported for openSUSE? My friend gave me it, and said that it was. But he doesnt use Linux.
View 4 Replies View RelatedI have a system with two nVidia graphics cards, with monitors connected to each graphics card. I used nvidia-settings to setup a X server for each graphics card. Rebooted with saved xorg.conf file. I do see all monitors displaying their correct image. I am using Gnome 2 supplied with 11.3. The problem is: how do I start applications on the 2nd X server? If I use the application launcher on 2nd X server, the applications appear on the monitors of the 1st X server. I am also unable to move applications windows from one X server to the other.
View 1 Replies View RelatedI have installed Opensuse 11.3 in my Dell Studio 1735 laptop successfully. With your help I succeeded in solve my wireless issue, but unfortunately it seems that I am having other issues.Frankly I am not perfectly sure that my graphics card is acting strangely, what I have noticed using Window Vista ( I have both in my laptop Vista and Linux but in two separately hard disk), the graphic level is superior (definition color, graphic effects and so on).Conversely, when I am using Opesuse, it seems that the graphic card is like powered down. So I am thinking that there is no hardware or firmware problem, but maybe drivers are not so uptodate.
Before getting back to you, I tried to solve the problem by myself: I tried to use every tool the KDE gave to me, but I did not find any parameter to change or error indication.
i am a fresh and new user to linux who started to use suse11.i am having ati graphics card for my product but don't how to install it.i downloaded the driver from my vendor's website.i double clicked the driver but it is not installed like windows.please tell me how to install it.
View 5 Replies View RelatedI have a lenovo y560 with opensuse 11.4 installed on it. My graphics card gets really hot in opensuse, so I am trying to shut it down permanently as I dont need it. I added radeon.modeset=0 to grub and even though the module is not getting loaded, the graphics card is still powered on. This is my lspci
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Madison [Mobility Radeon HD 5000 Series] [1002:68c0] (prog-if 00 [VGA controller]) Is there any way to power it off?
I've a big question about openSUSE 11.3 x86-64 graphics card driver. How do I successfully install proprietary graphics card driver on openSUSE 11.3? My graphics card is NVIDIA GTS 250, and Compiz is working on my PC. But it's using "Nouveau" driver, now I want to install NVIDIA proprietary GTS 250 driver. I did gooogle many ways, and tried them for install driver many times many hours. I still can't successfully install it, including "blacklist nouveau", "rdblacklist=nouveau", "NVIDIA-Linux-x86_64-260.19.36.run -k $(uname -r)"
View 5 Replies View RelatedOkay first off I'm a noob with Ubuntu. I've been trying to get Warcraft 3 and WoW to run on ubuntu via Wine, so far I managed to get them installed and running but I always have problems with graphics (poor rendering as oposed to when I ran them on windows). So I figured that maybe the graphics card/driver aren't installed correctly.
On the terminal I got this information: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 02) I checked System > Administration > Additional Drivers When it finishes searching for drivers I get the message "No proprietary drives are in use on this system" (I have no idea what this means, I read elsewhere that I should check this) So um, I don't know If any of this is useful or necessary to fix my problem.
I need help installing graphics drivers for my nVidia 8600GT.
View 3 Replies View RelatedI just got a new graphics card (all specs below) and when I start up the computer, it loads the BIOS, then says it's loading grub 2, then says, "Initializing gfx code..." and hangs there forever. How can I diagnose this and find out if the card will work with my computer and opensuse 11.1?
CARD SPECS
------------
NVidia GeForce 8400 GS
[code]....
I would like to know if I will be able to work on my laptop with 11.4 , someone knows if something changed with hang/freeze issues? Currently I have installed 11.1 but since repositories were removed no updates or new software for me so I'm considering installing something new.
View 7 Replies View RelatedI have installed several different distro's over the last coupled of weeks and have finally as intended come back to 11.4. Last time I installed it my pc was fitted with an older nvidia card and I installed a newer 200 series and got it to work with X11 using the nvidia driver. This time I did the install with the new card in and things haven't gone the same way. I have finished up with the os drivers on my system, nouveau and "swrast (No 3D Acceleration) (7.10)". Performance wise it's way way behind the nvidia driver.
Glxgears for instance runs at under 1/2 the speed even at a lower resolution. I suppose I could still configure to suite my monitor but given that difference in performance would you? I have done what I can easily do with repositories but no signs of nvidia drivers. I can download one as I did last time but from what I have read previously the above drivers may mean that I have to recompile the kernel. A simpler solution might be to re install with my old card in. Can't say I'm too keen on either option. Some distro or the other had a driver helper and installed the nvidia one perfectly.
I belive there is a problem with my graphics card, because when I start a VMware vm with accellerated graphics, i get this message: Code: Cannot open file "/home/joe/.vmware/dndlogs/ * dndlog.conf": No such file or directory. 3D graphics acceleration will be disabled. This computer does not have a 3D graphics system supported by VMware Workstation. My laptop model is the ASUS U52F-BBL9 btw.
View 1 Replies View RelatedI can't install my graphics card Radeon HD 3200, I use the same driver as I always do. But this time it did not work, it boots with an X error and I can't get into gnome.
Here is the Xorg log.
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.29-dsa-ia32 i686 Debian
[Code].....
I ran the wubi installer for kubuntu on my computer running a Windows 7 64 bit OS. When I boot my computer up I can go with either windows or kubuntu. I boot up kubuntu and an image of the kde logo appears. Then the computer shows a garbled mix of multi-colored pixels in no distinguishable pattern, yet the mouse is visible and still movable.
ASUS Notebook G73Jh series
Processor:
Intel Core i7 CPU Q720
1.60 GHz 1.60 Ghz
6 GB RAM
Graphics card:
ATI Radeon HD 5870
I'm trying to install a driver for a Radeon x700. I downloaded the driver from the site and the sh command to install it but this is what I got.
View 2 Replies View RelatedInstalled Ubuntu 11.04 but i don't know how to install my nvidia 7200 gs graphics card. in the previous versions (ubuntu 9.10) it installed very easly.. But in Natty 11.04, while i am try to install my driver it fails 2 times and after installation (reboot) ubuntu freezes and not working So reinstalled ubuntu 11.04.
View 3 Replies View RelatedI'm trying to install the drivers for my nvidia graphics card. I downloaded the shell script from the nvidia website. However, there's something peculiar going on. When I execute the shell script it says it cannot find my kernel headers, yet I can verify that my /usr/include/linux/kernel.h does exist. I have selinux on, but just installed os with it on, so contexts are fresh. Checked them as well. After doing some research I found something out. When I run a 'uname -a' I get this.
Code:
Linux ariel 2.6.18-194.el5PAE #1 SMP Fri Apr 2 15:37:44 EDT 2010 i686 i686 i386 GNU/Linux
Yet when I ran 'yum install kernel-devel kernel-headers' they installed the following versions.
Code:
kernel-headers-2.6.18-238.12.1.el5.i386
kernel-devel-2.6.18-238.12.1.el5.i686
Shouldn't they be
[Code]...
I see that the error in the nvidia shell script can't locate the header files for the RUNNING kernel version which makes sense. Why would yum install that version instead of the one in 'uname -a'? Or am I misunderstanding something?
I have a Gigabyte GA-MA74GM-S2 motherboard with integrated graphics that shows up on lspci as an ATI Radeon 2100. I also bought a PCI-Express Nvidia graphics card so I could use the VDPAU feature on Linux (plays H.264 in hardware). The BIOS has three settings about which display to initialize first:
Integrated graphics
PCI graphics
PCI-Express graphics (PEG)
I set the BIOS on PEG, but
I cannot get anything, not even a splash screen or POST messages, to emerge from the PCI-Express graphics card. (I'm using a DVI connector; the card also has an HDMI output.)I cannot get the kernel lspci to see the graphics card; the only VGA controller it acknowledges is the integrated one.Running dmidecode acknowledges the existence of an x16 PCI Express slot, and it says
Current usage: Unknown
There is an additional BIOS setting called "Internal Graphics Mode" which is normally set to "Auto" which means it is supposed to prefer a PCI Express VGA card. I set it to "Disabled" which now means I'm getting no output at all. I will soon be learning how to do a BIOS reset!
Other information: The PCI-E card is a MSI N210-MD512H GeForce 210. This is a fanless card. Although there are no fans to see turning, the heat sink on the PCI-E card is definitely getting hot, so the card is getting some sort of power.It gets all its power from the PCI-E slot; there is no external power connector.The BIOS is an AMI Award BIOS.how can I make the PCI Express graphics card visible to Ubuntu?
Do they recommend the installation of bumblebee energy saving graphics card? Also works with pc desktop or laptop only?
View 3 Replies View RelatedI have a cheapo Nvidea motherboard and an ATI 5700 graphics card. I wanted to know if there is a simple way to ensure that OS11.3 is using the ATI graphics card and radeonhd drivers instead of the Nvidea hareware+drivers. Is it necessary to blacklist the Nvidea drivers? Is there a simple YAST fix?
View 3 Replies View RelatedI'm running openSUSE 11.4 with GNOME. I have an EVGA nvidia GTX 285 installed, which is equipped with a variable speed fan. I'm running the nvidia driver package which includes the nvidia X Server Settings utility. The utility allows me to view the fan speed as a percentage of its maximum speed but does not allow adjustment. It appears that the speed remains at the card default of 40% regardless of GPU or card temp. When running certain graphic-intensive applications my card runs quite hot (sometimes >70 degrees C). Although this isn't hot enough to burn the card up in the short term, it is certainly hot enough to shorten my video card's lifespan.
So, the question is how do I set up my system so I can increase the fan speed to 50% or better yet, get it to increase as the GPU temp increases? The nvidia X Server Settings help indicates that fan speed is adjustable after enabling coolbits, but coolbits is not installed on my system and is not available from the default repositories. What is the easiest way to obtain, install and enable coolbits? I have no intention of overclocking my card. It was too expensive to risk damage to the card.