OpenSUSE Install :: Unable To Use Yast Package Manager Because It Seems To Crash During Repositories Refresh
Jan 12, 2010
I am meeting some problems on my opensuse 11.2 system in the last week, I see an higher load on CPU and the system seems to swap a lot of time. Checking on dmesg I found that at boot time I have a lot of errors: I paste a little part of the full log at the end of this post
If I am not wrong I have found and installed an official opensuse 11.2 kernel update through zypper some days ago Moreover, actually I am not able to use yast package manager because it seems to crash during repositories refresh (or just after it)
[Code]...
View 2 Replies
ADVERTISEMENT
Jun 18, 2011
The last 5 days or so ,when I start software manager or zypper to update/install/remove something it can't refresh the repositories. Is something wrong with the repos? or it's just my problem? I'm using openSUSE 11.4 KDE 64 bit
View 8 Replies
View Related
May 15, 2011
The package manager is scrambled in my Ubuntu 11.04. It started with the repositories list being scrambled with multiple entries. Now when the Package Manager is launched it just accesses the hard drive forever. I did give it a half an hour just in case so it clearly stuck in a loop of some kind.
What I'd like to know is: Is there some way to reset, clear, turn off or de-select the added Repositories list from the command line (terminal.) This seems to be the only way since the Package Manager gets stuck. Keep in mind that I'm only slightly competent with Linux and have no idea where the Debian Package Manager data is located or how it works. If I go poking around without at least some guidance I may make things worse.
The problem seems to be spreading. Got stuck again while saving this message. Turned off the system, rebooted to recovery mode and did a file system check. Okay for now. Switching to clean OS on other partition.
I'll check for answers there but it's only Ubuntu 10.04 and I'd very much prefer to have 11.04 working and not have an effectively dead partition and don't want to loose everything on it with a re-format and 2 day re-install process (no installation disk.)
View 10 Replies
View Related
Apr 12, 2010
it's a couple of weeks I can't perform YaST updates from my openSUSE 11.2. The reason is that YaST wants to connect to repositories "only" through IPv6, but my network doesn't support it. I quoted only because I suppose it prefers v6 over v4, but it keeps trying to connect without switching to v4 or returning error.
Even if I disabled IPv6 from YaST/Networking/Network Settings, I still have a local scope address. I connect to Wifi using KNetworkManager. The TCP/IP stack should know that if an interface has a local scope v6 address and a global v4 address, it's a bad idea to keep trying with v6. Italian mirror, garr.it, of openSUSE repository both has v4 and v6 addresses. If I try to ping opensuse.mirror.garr.it I ping v4, but if I try to telnet that host on port 80 it tries to connect to v6. Same if I try to connect with Firefox.
How to tell Linux that I don't have IPv6? I'm connecting from University of Naples wireless network. While unina has IPv6 via GARR's Teredo tunnel (2001:760::/32 as I remember), it doesn't reach students' network because DHCP server doesn't release IPv6, nor Zeroconf obtains one. I just would like to use classic IPv4 until, at least for now.
View 2 Replies
View Related
Mar 12, 2011
I am new to OPEN SUSE. I installed 11.4 without any problems. It is working fine. I did Multimedia install with oneclick option. All the updates were done. Today while going thru forums FAQ, I saw repositories list and their priorities. When I checked my repositories in YAST, there was no PACKMAN so added the PACKMAN repository. I noticed in Software Manager there is Upgrades OpenSuse-release 11.4-1.8 - 11.4-1.9! What does this mean?
View 1 Replies
View Related
Mar 20, 2011
I did zypper dup to move from 11.3 to 11.4. Almost everything works fine. But when I try to add community repositories I get the 11.3 repositories, not the 11.4 repositories. So there must be a .conf or .rc file somewhere telling yast that we're on 11.3 when in fact we are on 11.4. How/where can I change that? And while we're at it, how do I load a Factory repository? They do not appear in the list of Community" repositories.
View 9 Replies
View Related
Jun 14, 2011
I hope this is the right forum in which to post this but I am currently running SUSE 11.2(I know im a couple versions back, its a long story but this box has been in storage for awhile) but the problem I am having is with updating SUSE and accessing the repositories through the Yast Software Installer. When I open it I get several variations of this message:
Download failed:
File '/repodata/repomd.xml' not found on medium '[URL].. I think this must have something to do with an old repository not being up but im not exactly sure how to fix this.
View 7 Replies
View Related
May 11, 2011
I have written a script which builds a repository into a website document root and it seems to work OK apart from one little problem other servers which use that repository have set it to autorefresh, but they don't, I have to manually execute "zypper refs".how yast2 knows that a repository is out of date?
View 2 Replies
View Related
Feb 28, 2010
When an installed package name appears red text in YaST, is it because the repository wasn't kept --- as in one-click remove the repository after install?
View 3 Replies
View Related
Feb 24, 2010
When trying to open YaST Software Manager, it downloads/refreshes repository information, but then, just when the loading bar indicates that the manager is about to open, a warning window pops up which says: "There was an error in the repository initialization." The program continues to open, but only packages that have already been installed are visible.
View 4 Replies
View Related
Jun 14, 2010
I know I should be able to do an online update using cl zypper but would much prefer to use Yast's sw manager as it's easier to review and respond to package issues that always arise (because of packages made by me or dl'ed from obs but from repos not enabled in the repo manager)currently running 11.2
View 9 Replies
View Related
Dec 10, 2009
Looking for source code packages I have configured the "Main repository (Sources)" into the yast list of repositories. However when I select the repository view in th esoftware manager it shows this repository as empty. Other repositories work. I have checked the link to the repository to be valid. I have added it automatically from the "Community repositories".
View 9 Replies
View Related
Sep 2, 2011
With zypper refresh I get this Repository 'openSUSE-11.4-Debug' is up to date. Repository 'openSUSE-11.4-Non-Oss' is up to date. Repository 'openSUSE-11.4-Oss' is up to date. Repository 'openSUSE-11.4-Update' is up to date. Retrieving repository 'libdvdcss' metadata [error] Repository 'libdvdcss' is invalid. Download (curl) error for 'http://opensuse-guide.org/repo/11.4/content': Error code: Connection failed Error message: Couldn't resolve host 'opensuse-guide.org' Retrieving repository 'packman' metadata [error] Repository 'packman' is invalid. Download (curl) error for 'http://packman.inode.at/suse/openSUSE_11.4/content': Error code: Connection failed Error message: Couldn't resolve host 'packman.inode.at'
I was able to add other repos and install applications and upgrades (new install Gnome 11.4 64 bit on friends laptop), and Packman and Video lan are the only repos I can't refresh, any ideas?
View 6 Replies
View Related
Aug 2, 2010
I'm rather new to Linux...especially Debian. I've been running Kubuntu for about 1 month now and I wanted to try out Debian as well. So I installed it on a laptop (Downloaded the 6 DVDs). Now, how do I add some repositories to Synaptic so I can update my software? Also, is there a list of repositories? So far, every time I want to install something I need to insert one of the DVDs.
View 3 Replies
View Related
Jul 29, 2010
I tried to add another repository to yast (Index of /repositories/mozilla/openSUSE_11.2) and when I was done, Yast gave me an error message and now no repositories show up.
The error is: "/etc/zypp/repos.d/_mozilla_openSUSE_11.2.repo:Line 2 is missing '=' sign"
How do I fix this? How do I get my repos back? I took a look in that directory and this is what is in it:
Code:
[_mozilla/openSUSE_11.2
]
name= mozilla/openSUSE_11.2
enabled=1
autorefresh=1
baseurl=http://download.opensuse.org/repositories/mozilla/openSUSE_11.2
path=/
type=rpm-md
keeppackages=0
View 9 Replies
View Related
Feb 9, 2011
I am running Suse 11.1 64bit, with KDE, recently I received a pop up on my screen, "something about update problems", I used Yast 2 and selected online Update and it couldn't find updates for Nvidia and froze at that point. I dis-enabled that repository and refreshed all of the remaining Repositories individually and it seemed to work. I then went to the repositories listing and selected "Add" and selected "community" repositories and received the following: WARNING Unable to download list of repositories or no repositories defined. What is my problem? How do I acquire the list of community repositories? I can live with out the Nvidia repository for now but would eventually like to get it back.
View 2 Replies
View Related
Nov 13, 2009
i had the problem that i couldn't surf access the internet while DNS and PING worked well. That i solved with ipv6.disable=1 at boot time. Now i can suf the internet with a browser but YAST is still unable to access the repositories which are accessible with a browser. Can someone please help me what the problem with YAST is?
View 9 Replies
View Related
Jun 18, 2011
when i tried to open my software management(repositories) in YaST i saw a pop up window it says PackageKit is still running(probably busy)Ask PackageKit to quite again.i can't quit that.i tried to quit it via system activity.Because of this i can't open software management(repositories).it is also not working.how to quit PackageKit?
View 4 Replies
View Related
Apr 22, 2011
After I upgraded from KDE 4.5 to KDE 4.6 I ran into a problem with changing the the status of different repoes from enabled to disabled, and vice versa. As I only did a desktop upgrade it is perhaps just a coincidence and hence the problem may be related to something different. But in any case, if I tick or untick the 'enable' or 'disable' option within the Yast module Software Repositories for the repo I wish to activate or deactivate, nothing happens. Deleting and readding the repoes has no effect, neither has rebuilding the rpm db or zypper refresh. I'm not very familiar with the command-line for these operations so I am grateful if anyone could give me a hint on what to try next.
View 6 Replies
View Related
Apr 29, 2011
After testing Opensuse 11.4 since it was released, I decided to go back to version 11.3. After installing 11.3 I find I cannot add the community repositories, such as Nvidia, Packman, etc. It attempts to download the repository list but gives the following error message : Unable to download list of repositories or no repositories defined. I've used this DVD before and it installed perfectly. I then tried installing 11.3 from a network cd but got the same error when trying to add a repository. At this point I don't know what to do. Joe
View 3 Replies
View Related
Apr 12, 2010
Whenever I try to install a program by Synaptic Package Manager, it downloads packages but it doesn't install those.It tries to connect to downloads.openwrt.org but unables to connect because of connection time out. I have attached a screenshot of it.
View 7 Replies
View Related
Apr 27, 2011
I upgraded an older system from jaunty 9.04 to karmic 9.10/ Following the upgrade, and about six hours of stable use, I ran the synaptic package manager, to pull in fvwm-crystal and a couple of other nits. Synaptic went into its usual tiring Rebuild Index while the resource hog update-apt-xapian ran away gleefully with the cpu pegged. for longer than I've ever seen it... about 15 minutes, and then the system crashed. and, I mean it crashed hard. I have not seen linux do this in years. Not just a seg fault, the whole machine just crashed (cpu, display, keyboard, the works). Restart and no problem, until I ran Synaptic (Rebuild Index. several minutes, crash).I played this game for a while; thinking the system might just might be overheating... let it cool down, and retried.same result. I tried running one last time, and this time pressed the reload (on Synaptic main panel) prior to the crash.it pulled in the repository updates and completed the Rebuild Index. (no crash)
I have run Synaptic several times since that. downloaded some goodies, and have had no further crashes (although, it does run Rebuild Index every time I start it.and update-apt-xapian pegs the cpu while this is going on. The question(s) I have are:
1) I was not aware that an apt these days can bring down the kernel (no panic, no logging, just down....) How is update-apt-xapian tied into the kernel that permits this vulnerability?
2) There appears (from searches) to be a problem with Synaptic or at least with xapian...?? What is going on with this resource pig..?
3) If I disable xapian and use sudo apt-get instead, instead of Synaptic, does this solve this resource problem?
4) Is there another forum area where this might be addressed besides general?
View 4 Replies
View Related
Aug 20, 2010
I am trying to install vim from suse repos, but it is giving me error
Code:
File './suse/i586/vim-base-7.2-23.1.i586.rpm' not found on medium [URL] Abort, retry, ignore? [a/r/i/?] (a): when I tried to open the url [URL] it is going to [URL]
View 1 Replies
View Related
Nov 13, 2009
From some time now whenever i start the Package Manager it hangs at the line "Loaded Plugins: refresh-packagekit" I don't know the reason as it doesn't throw up any errors. Even if i reset the terminal. nothing changes. if i force quit then when i start package manager again (in the same boot) it stops and gives the message that other application has yum lock as i cannot auto install any software
View 5 Replies
View Related
Oct 1, 2010
I have just re-installed Ubuntu 10.04. -The installation went smoothly, completing in approximately 25-30 minutes. All of my hardware, including keyboard, mouse, monitor and network interface has been detected and works properly. I am currently using the machine to type this. I can browse the web using Mozilla Firefox. My network connection does not start and stop; the machine remains connected with no indication that there is a fault with the NIC, and so on. I am able to download files at 150-170kB/s as is normal for me with Firefox.
I have not yet installed a graphical user interface to configure the firewall. I have not in any way worked with any system files. I am using the same hardware that I have used for approximately one year before this with no incident. I first encountered this with my previous install at approximately 3:00 AM (local time,) when I manually started Update Manager and attempted to check for updates in the default repositories. I have not altered the repository list in either the previous install or this new install. The Update Manager is entirely default.
Upon checking for updates, the list of repositories hangs after I believe at least ten lists have been checked. All of the lists checked before this hangup read "0 B" in the downloaded section of the window. It appears that upon checking for updates, no actual data is transferred to my computer. Again, after going through several of the default repo lists, the entire process halts. A wait of approximately ten minutes still reads that the process has not continued. -During this time I am able to browse the web using Firefox, and the OS seems to be responsive and otherwise functional. There is not a slow response from the keyboard or mouse, there are also no graphics glitches. Again, this problem first occurred with my previous install of Ubuntu 10.04, which was up-to-date as of approximately midnight last night. I have reinstalled the OS and the problem persists. The symptoms of this problem are consistent between my previous install and the reinstall.
View 9 Replies
View Related
Jan 30, 2011
I am running Suse 11.1.I do the following:
Click on Software Repositories
Click Add
Click Community Repositories
Click Next.
I receive an error, "Unable to download list of Repositories or no repositories defined."
in the /etc/YaST2/control.xml the external repository is:download.opensuse.org/YaST/Repos/openSUSE_111_Servers.xml
View 9 Replies
View Related
Mar 10, 2010
I am trying to access my package manager. However it tells me that is unable to access it. Is there a fix for this?
View 5 Replies
View Related
May 17, 2010
Using 11.0 64bit OpenSuse. I was updating this workstation. Everything was working good. I rebooted from the last set of updates and now I am trying to access the Package Manager from yast, but it is not working now. It starts up, then it goes to an "Initializing", then a popup says that "Accessing the Package Manager Failed". It also notes that something else is using the package manager, then gives me choice to either continue or retry.
View 3 Replies
View Related
Jul 13, 2010
Yast-gtk sw manager - is there a way to reinstall an rpm? There is in the qt version but can't see how in gtk.
View 9 Replies
View Related
May 8, 2011
Using the Software Manager in YAST how do I determine who the packager of the file is? Is it appropriate to contact them and ask them to update the version?
View 4 Replies
View Related
