Using 11.0 64bit OpenSuse. I was updating this workstation. Everything was working good. I rebooted from the last set of updates and now I am trying to access the Package Manager from yast, but it is not working now. It starts up, then it goes to an "Initializing", then a popup says that "Accessing the Package Manager Failed". It also notes that something else is using the package manager, then gives me choice to either continue or retry.
This is what happens when i try to update "accessing the package manager faild" "system manager is locked by the application with pus 10464 (/user/sbin/packagekitd).
Subprocess failed. Error: RPM failed: installing package xen-4.0.0_21091_06-0.1.1.x86_64 needs 27MB on the /boot filesystemI seem not to be able to change the size of the /boot, but 11.2 loads okay but not 11.3There only 19MB left from 66 and I can't make it bigger, I hope there is someone thathas seen this. I would like to see some of the update with XEN.
I finally convinced my wife to remove Windows from her Acer Aspire 5680 and instead to use OpenSuse, but unfortunately I am having some major trouble for no reason.
You see as soon as I installed the OS, I tried to add some new programs, like Thunderbird, etc but I keep getting an Accessing the Package Management failed error message. It says that it can't continue because process 9172 is blocking it. But I opened the System Monitor and can't find the **** 9172! My OpenSuse installation doesn't have this problem.
how to fix it? I can't install or update any software at all!
Today i upgraded my system and started getting error when i update, install or remove a package. The error isn't restricted only to one repository so i thing something is wrong with my system.
I am meeting some problems on my opensuse 11.2 system in the last week, I see an higher load on CPU and the system seems to swap a lot of time. Checking on dmesg I found that at boot time I have a lot of errors: I paste a little part of the full log at the end of this post
If I am not wrong I have found and installed an official opensuse 11.2 kernel update through zypper some days ago Moreover, actually I am not able to use yast package manager because it seems to crash during repositories refresh (or just after it)
Have received errors the last two times I've run Update Manager. This one says: Package Operation Failed
The installation or removal of a software package failed. Details: installArchives() failed: Preconfiguring packages ... Preconfiguring packages ... (Reading database ... (Reading database ... 5% (Reading database ... 10%
[Code]...
subprocess installed post-installation script returned error exit status 1 The last error said something about "Max Reports". What I can't tell is whether the updates actually installed.
I want to install CmapTools in my desktop, which runs v.10.04. I have downloaded the .bin file from their site.Is there a way to install it using Synaptic Package Manager?
when I am trying to install a RPM package I get the following error: failed to install file: [PK_TMP_DIR|dir:///var/tmp/TmpDir.w29lVZ] Repository already exists It tried to install DBVisualizer and Adobe Reader 9 and get the same error. Just the directory is different. How do I solve this? I tried to delete the mentioned directories but I can't find them on the file system.
having had problems with getting grub2 to work on dual HDD setup...despite the most excellent advice on the forum i took the plunge and installed 10.10 from update manager within 10.04..... bingo fixed grub and now have dual boot again. but the update manager and synaptic package don't work because of libedata-cal1.2-6 file that remains..following other advice on the forum Advice gratefully received, how can i force an unistall of this package
mark@studypc:~$ sudo apt-get -f remove Reading package lists... Done Building dependency tree Reading state information... Done
I was trying to open the Update Manager and this popped up... "Could not initialize the package information An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message:
'E:Encountered a section with no Package: header, Eroblem with MergeList /var/lib/apt/lists/ph.archive.ubuntu.com_ubuntu_dists_natty_main_i18n _Translation-en, E:The package lists or status file could not be parsed or opened.'"
Do I have to update the package manager that comes with OpenSuse before I get all packages?For whatever reason using the live cd I can't find any of apps I am looking for but on packman.org I can find all of them.
I have a small touchscreen tablet here that's running a cut down version of ubuntu (I think 9.04). It has its own flash gui and no mention of ubuntu on it anywhere (but I know 100% that it is). Anyway, its so cut down it doesn't even have things like apt-get, any file sharing capabilities and it cannot run .deb files. I can only do things to the filesystem via ssh not using the gui. Its running a busybox shell which is also very limited.
I would ideally like to be able to connect to some nfs shares on my ubuntu server with this thing but im having no luck. I have found out its because it doesnt have nfs-common or portmap installed (apparent dependencies). How would I go about manually installing something like that? I need to be pointed in the right direction as atm. I am not too sure. Baring in mind I cannot simply use apt-get or unpack a .deb file.
I currently have ubuntu with NO gui what so ever. And I was wondering if I install the x-window-system-core + kde not the kubuntu desktop will I still need to install KDM as well as a package manager? Or would I just be better off installing the kubuntu desktop?
I am using Linuxmint 8 helena. I am unable to install any package using synaptic: The problem might occured after I have given the following command: cat > $LFS/etc/group << "EOF"
The problem just started today.It downloads successfully,but at the time of changes, it shows "Not all changes and updates successful. For further details of the failure please expand "details" panel below "
Details: dpkg: unrecoverable fatal error aborting syntaxerror:unknown group 'mlocate' in statoverride file E:subprocess /usr/bin/dpkg returned an error code(2) A package failed to install trying to recover.
I just installed 32-bit CentOS 5.5 in a Vmware virtual machine. I'm unable to install RPMs from either the graphical U/I (Pirut) or CLI (Yum). Pirut stops responding (no screen repainting) after displaying the "Updating software" dialog; Yum gets to the display of "Running Transaction" where it hangs. The initial installation (from the net-install ISO) obviously succeeded, and the after-install update of about 50 packages also worked fine.
yum.log contains nothing past the entries made during the initial install. Because I had a problem with corrupted files from a mirror during installation I tried using the baseurl setting in CentOS-Base.repo instead of mirrorlist, but that had no effect.
I finally convinced my wife to remove Windows from her Acer Aspire 5680 and instead to use OpenSuse, but unfortunately I am having some major trouble for no reason.
You see as soon as I installed the OS, I tried to add some new programs, like Thunderbird, etc but I keep getting an Accessing the Package Management failed error message. It says that it can't continue because process 9172 is blocking it. But I opened the System Monitor and can't find the **** 9172! My OpenSuse installation doesn't have this problem.
I installed Texlive from Yast2. Everything is ok, but the managing of new packages.The standard installation provides no package managing, and guides don't say very much about how to get it. I'm new in Gnu/Linux OS, such Opensuse, and I don't know quite nothing about the shell (or terminal? -sorry for my English knowledge).I'm now trying to install the package named "parallel" in Texlive. How can I do without a graphical interface? Can I get an app similar to Miktex package manager?
The package manager runs when a user clicks on a .rpm file automatically. I tried clicking on it from a normal user dolphin window and it opened up but since it can't install to a /something directory, I had to run it as su. So I try to open dolphin as su and then click on my file. I see the package editor starting up (bouncy icon and a space in the panel) but it never actually pops up a window. Now when I click on the file from either user this is happening. What's going on? Is this a bug?
**update, it popped up from normal user after like 10x attempts and it said that the repository already exists and this is an unexpected error. what does that mean? what errors are "expected"?
Was wondering if someone could suggest a reference and possible approach to troubleshooting openSUSE update. I'd always assumed that the openSUSE update (applet) would notify me and update any apps installed from any of the configured repositories.This week I found two applications were not detected and updated, one from the Pacman repository where an update was available for more than 2 weeks and another from the Contrib repository where an update was available for an unknown amount of time.I manually detected and updated both using zypper without any special repository configuration.The SUSE updater has been running regularly installing critical and recommended patches regularly without issue.Am considering
- Maybe somewhere there is a config specifying repositories and/or apps? I can't seem to find something that's applicable. - Maybe I misunderstood that the SUSE updater isn't supposed to update anything from non-OSS repositories?
it's a couple of weeks I can't perform YaST updates from my openSUSE 11.2. The reason is that YaST wants to connect to repositories "only" through IPv6, but my network doesn't support it. I quoted only because I suppose it prefers v6 over v4, but it keeps trying to connect without switching to v4 or returning error.
Even if I disabled IPv6 from YaST/Networking/Network Settings, I still have a local scope address. I connect to Wifi using KNetworkManager. The TCP/IP stack should know that if an interface has a local scope v6 address and a global v4 address, it's a bad idea to keep trying with v6. Italian mirror, garr.it, of openSUSE repository both has v4 and v6 addresses. If I try to ping opensuse.mirror.garr.it I ping v4, but if I try to telnet that host on port 80 it tries to connect to v6. Same if I try to connect with Firefox.
How to tell Linux that I don't have IPv6? I'm connecting from University of Naples wireless network. While unina has IPv6 via GARR's Teredo tunnel (2001:760::/32 as I remember), it doesn't reach students' network because DHCP server doesn't release IPv6, nor Zeroconf obtains one. I just would like to use classic IPv4 until, at least for now.
In a moment of temporary insanity I tried to install Backuppc using the synaptic package manager, but started to panic when the installer tried to set up an Apache web server on my PC (which I do not want). At that point I tried to cancel the installation, but got an error message. I then marked the package for complete removal in the package manager, but every time I click the apply I get an error message, "E: backuppc: subprocess pre-removal script returned error exit status 2" and the package, which did not install correctly in the first place, refuses to go. When I ran the update manager today, to install the latest updates, the manager tried to continue with the Apache installation stage of the Backuppc installation. How do I get rid of it?
Every time when I click on reload button in synaptic package manager I get these messages:
W: Failed to fetch http://in.archive.ubuntu.com/ubuntu/...ty/Release.gpg Could not resolve '1@192.168.0.4'
my internet connection has http proxy with address 192.168.0.4 and port no. 3128. every time when i click on reload button in synaptic package manager i get a lot of above messages. btw i am using ubuntu 9.04.
I'm getting the following error every time i run the package manager to install or update etc.. Code: E: nxserver: subprocess installed post-installation script returned error exit status 1 Despite the error, apt still works and allows me to install/remove apps. The application in question also works fine too.
I've been using KVM with great results on Slackware but one thing about Xen 4 that appeals to me is VGA and PCI passthru. I did try to install the Xen Slackbuild some time ago but failed. I'm afraid I can't remember why now. As far as I remember the Slackbuild was just out a day or so, so perhaps there were unresolved issues in the early days. How is Xen now? Does it run as well as KVM, for HVM as well as PV guests? Does virt-manager allow you to create Xen VMs or just KVM VMs? I'm very happy with KVM on Slackware (and Xen on NetBSD) but as I say, the Xen 4 release has some enticing features which pretty much do away with dual- and multi-booting. Full-throttle graphics in a VM?
