i try to set-up my apache to support SSL.
the SSL conf file under '/etc/apache2/vhosts.d/mySSL.conf' will run if i restart (/etc/init.d/apache2 restart) apache through the terminal.
but if i restart apache/HTTP Server in YaST, my conf file (/etc/apache2/vhosts.d/mySSL.conf) will be deleted and the SSL wont work.
tell me what is happening to the system? coz i use yast primarily than the terminal.
I was thinking of trying out the UEFI support that HP has in my laptop BIOS in the next few days. My reasons is that I get a custom boot logo... and (hopefully) a better boot-speed. What is the current state of affairs with the openSuSE UEFI/EFI install support on a empty hdd for x86_64 does anyone know? (badly worded I apologize) This may seem naive but I have struggled to answer this with most posts being about Mac's for obvious reasons.
Specifically, Do I have to have any custom knowledge on formatting the HDD with a GPT partitions or does the installer do this for you? Secondly, How well does the UEFI bootloader tie in with the config tools in YaST2? (I would like to have UEFI but if it turns into some headache in setting up the boot area by hand each time the kernel updates I will forget it.) I can safely say this will be a machine with only openSuSE installed as an OS, no need for any others or any dual-boot problems. This isn't overly urgent and I will dedicate (at least) a whole weekend to tweaking once I buy a new disk and install openSuSE on it. If nobody knows then I will dive in head first and report how I find it and any problems (and severity).
As in the title how can I do it? The configure option --enable-so seems default.
View 4 Replies View RelatedIn OpenSuse 11.2 it was possible to pass the ip configuration on the kernel command line and the kernel would configure the interface (eth0 in my case) properly. The ifcfg-eth0 needed to be configured as 'static' and 'auto' with the other parameters absent. The kernel arg would look like: ip=<client-ip>:<server-ip>:<gw-ip>:etc:etc
This no longer works or works differently in OpenSuse 11.3, despite the fact that ip_pnp seems to be compiled into the kernel. Is there some way to enable this in 11.3? I just want to do basic static routing with the parameters passed directly to the kernel instead of hard-coded in the ifcfg-eth0.
p.s. in 11.3 when I try to do the ip_pnp method the eth0 does come up but none of the routing is correct. There is no default gateway and no ip is assigned even though I am passing the kernel args properly.
I have already install Apache2+php and work well.Now I want to make that server ready for SSL support. please explain in detail how I install ssl( what changes I should make in the httpd.conf and any other configuration files to make) the server ready for SSL. I goggle many time and every things talk about enabling ssl-mod but I can't enable it ( sudo a2enmod ssl give error ) also I try to compile openssl-0.9.7e.tar.gz but it also give error I install apache from source but i didn't add ssl mod with it so now what ? please help me
View 9 Replies View Relatedhow install asian character support. Like Japanese, Chinese, or Korea, other.
View 3 Replies View RelatedJust tried to test ea support by running setfattr on a test file and received an error message to the effect that this function is not supported. Is that corrects and if so how do I turn on ea support?
View 3 Replies View RelatedI want to experiment with hugepages support in KVM. I have added
<memoryBacking>
<hugepages/>
</memoryBacking>
to my domain xml.
Also I create the directory /hugepages and mounted it using
mount -t hugetlbfs hugetlbfs /hugepages/
and created huge pages using
echo 4096 > /proc/sys/vm/nr_hugepages
Now, when starting the domain from virt-manager, I get the message:
libvirtError: internal error hugetlbfs filesystem is not mounted
What is the recommended way to setup hugepages in opensuse 11.3?
Is the parallel port still supported on OpenSUSE 11.4 ?
View 4 Replies View RelatedAre still the parallel printers suported under OPenSUSE 11.4 ????
View 1 Replies View RelatedI need to install 32 bit on Suse 11 64 bit, how can this be done, the build option is not working due to openssl issues.
View 3 Replies View Relatedteste.domain.com:
Code:
<VirtualHost *:80>
ScriptAlias /cgi-bin/ /home1/_sites/teste/site/cgi-bin/
<Directory /home1/_sites/teste/site/cgi-bin/>
Options FollowSymLinks +ExecCGI
AllowOverride None
[Code]...
i just downloaded openSUSE 11.4,i used to burn the .iso file to a cd and then boot using the CD. recently my cd/dvd writer crashed and i was wondering could i boot from my pen drive in such cases,i also prepared a bootable pen drive but in my BIOS settings there is no option visble for such booting.
View 6 Replies View RelatedFrostwire and Nicotine + they both have outdated RPM's for 10.x that dose not support 11.3. They have newer .deb files. What would I have to do to install a .deb file. Navigate to the file using CD (change dir) and then? Model: Toshiba L505-ES3045 (Intel i3, 4gb Memory, OpenSuse 11.3/Windows 7, Intel HD Graphics)
OS: OpenSUSE 11.3 Prior OS's: Mac OS/X11/Fink/Windows XP/Vista/7.
I have been trying to upgrade (ended up trashing and reinstalling) from 11.1 to 11.2. I selected French language with UK keyboard. This option seems in the end to just default to the French keyboad. Reinstalled with UK lang and UK keyboad which is acceptable to me but I then find a big problem. How do I set the compose key so I can enter accented characters etc. (� � � ...) Prior to 11.2 this was some with SAX but SAX support for keyboards appears to have been removed and I believe should be provided by KDE, Gnome, etc.
Does anyone know how to define the compose key in 11.2? I have searched google and the suse forums but found nothing other than something in German that I did not understand. While I could buy a French or perhaps better a Swiss keyboard for the tower this is not a real option for the laptop and on-screen keyboards are useless.
I've just updated a server from openSuse 11.0 to 11.4 using zypper dup. The server is running apache2 with mod_python and there is a conflict with the versions of expat being used, this is causing segmentation faults in Apache and the python web pages do not load.The problem is detailed here:ModPython/Articles/ExpatCausingApacheCrash - Graham's Project WikiApache is using expat 2.0.1, and python is using 2.0.0.
View 1 Replies View RelatedI installed apache2 and mysql database on a Debian system. It is using reverse proxy on apache to redirect requests to apache2 running on any machine which is on Xen server as a Virtual host. I tried to install Drupal on it. Every thing went fine till I pointed my browser to:
http://IP[/url] of LAN where Drupal was installed/drupal
then I see an installation page of Drupal which welcomes me. I click install in English then it can not proceed to connect with database. Database configuration: Your web server does not appear to support any common database types. Check with your hosting provider to see if they offer any databases that Drupal supports.
I have created a database and username for Drupal separately. What should I check to. There is one more error
http://Public IP/some location/
Is showing me contents of Document Root but there is a folder named drupal on it. When I click on it I get error. Not Found. The requested URL /drupal/ was not found on this server. Apache/2.2.9 (Debian) PHP/5.2.6-1+lenny8 with Suhosin-Patch proxy_html/3.0.0 Server at
What things should I check in for? I am also getting errors like:
- Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName on individual DomU's what should I check in. and on Dom0 when restarting apache2 I get following error.
- Reloading web server config: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
[Wed Apr 14 15:23:05 2010] [warn] NameVirtualHost *:80 has no VirtualHosts
telling me if this behavior of my openSuSE 11.2 installation is normal? I use a 64-Bit openSuSE 11.2 with kernel 2.6.31.x with root partition ext4. After adding and updating from repository kernel:/HEAD/etc to 2.6.34-rc4 I can not boot anymore due to a lack of module ext4. I thought today ext4 is stable and fix built-in in the actual kernel releases, isn't it? The error message at boot time: FATAL: Module ext4 not found. Which is right because in /lib/modules/<kernelversion>/kernel/ there is NO 'fs' subfolder. Isn't the kernel:/HEAD/ repository the official update path to get a newer major kernel? (besides openSuSE's Updates for security reasons) Do you know how I can fix it without self-compiling?
View 5 Replies View Relatedi'm currently using windows vista and want to boot opensuse11.4 from my usb drive but my BIOS doesn't support it. please explain steps to install it on vista hard-disk,i'm getting confused following steps posted on theris website
View 4 Replies View RelatedI am going to install a computer for multi-language support for English and the Korean Hangul written language. I would like to configure the input from the keyboard to switch from English to Korean. I have keyboard with English and Korean and I would like to configure one of the keyboard buttons to switch the input language similar to how Microsoft multi-language support works. What applications and configuration changes are necessary to implement this.
View 6 Replies View RelatedI am impressed with 11.4 and am happy that for the first time ever I don't need to install a kernel patch to support my on-board nVidia graphics. However, the on-board sound no longer works now. I don't know how to set it up in phonon. My device number 0 in phonon is MCP72XE/MCP72P/MCP78U/MCP78S high definition audio, and I assume this is my nVidia on-board sound card. The driver information states snd-hda-intel.
How can I check what is wrong with it? It did work fine on 11.2 right up to the 11.4 installation. I do get system sounds (like the start-up and shut-down sounds), but nothing from any application, e.g., firefox playing a video. Based on the advice from another thread I tried: speaker-test -c2 -l5 -twav This does not produce any sound, but gives the following information: speaker-test 1.0.24.2
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
WAV file(s)
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 96 to 1048576
Period size range from 32 to 349526
Using max buffer size 1048576
[Code]...
running 11.0,Linux 2.6.25.20-0.5-paeusing a 3ware 9500 adapter - raid 5 array with hot sparethe system is only 6 weeks old.several days ago, apache would stop responding. trying a restart gives:
/etc/init.d/apache2 start
/bin/mktemp: failed to create file via template `/tmp/apache2.nb6xHyzlga2e': Read-only file system
[code]....
I ssh to a remote server which is running in SUSE. And I want to install apache2.0 there. Then I used yast2 to install it. But after installing it, I go to the terminal and type" apache -version" to check if apache is installed there. And it said "-bash: apache: command not found". I don't if I haven't successfully installed it, or I have installed it but just haven't put it into PATH yet. So, my problem is that can anyone tell how to check if I have installed it? If I have installed it, then what is the path of the directory it locates? And if I haven't probably installed it, then can you tell me the how I can installed it? And I am asked to install apache mod_wsgi as well.
View 9 Replies View RelatedI put together a step-by-step guide of how I installed openSUSE 11.1 on my ASUS Eee PC Seashell 1005HA Netbook. I planned on going back and re-installing using my own guide to check for mistakes, etc. but I never seem to get around to it, so I'll just post what I have and let you guys comment if you run into issues. Side notes: This guide assumes you want to wipe out Windows XP and run only openSUSE. Sorry, I'm a Gates hater.
I still haven't figured out how to configure the function keys support for volume controls and wireless. I'm hoping the "eeepc kernel module" mentioned by malcolmlewis here: Suse on my Asus 1005HA - openSUSE Forums will do the trick.
I have installed ZendServer CE on my distro and I have tried to create a startup file in this way:I create the file httpd in the folder /etc/init.d
I run chmod 775 httpd
I execute chkconfig --add httpd on
But this is the message returned from system:
insserv: warning: script 'K01httpd' missing LSB tags and overrides
I'm wondering how I can enable LDAP support for my Ubuntu 10.04 LTS server running Apache 2 and PHP 5.3.2? What I'm trying to do is allow users on my existing company's LDAP system to login to my Elgg site automatically (and possibly have their details filled automatically).
View 1 Replies View RelatedI am installing Ubuntu Server 10.10 on and old Dell Laptop. The network connection is an Xircom PCMCIA card.During install, the computer sees and interacts via the network just fine. For example, I can ping the gateway. Also, the command "lspcmcia" works and show the Xircom card.When I reboot, however, there is no network access, and the "lspcmcia" command is not there. When I try "lspcmcia" the OS helpfully tells me that I can "apt-get" pcmciautils, but, without network access, that fails.I tried adding the install cdrom to apt using "apt-cdrom" and then tried to "apt-get" pcmciautils and it got further, installing some dependencies, but acted like it still was unable to locate the pcmciautils package.
View 1 Replies View RelatedI was wondering - is there any multi touch gesture support in openSuse 11.4? I have enabled multi touch scrolling under the 'Mouse' module in Yast, and it works fine. However, i was wondering if a multi touch gesture set is available - such as pinch zoom, or even custom gestures mapped to keyboard combos - e.g. using a spiral to launch terminal?
System - Acer Aspire One D255 (n550 version)
Mouse Pad - SynPS/2 Synaptics TouchPad
I have been using Suse since version 6, now I installed 11.4 64bit - great distro, but still have no PHP5-MSSQL support. Why is that? FC supports it, why not Suse?
Is there, maybe, a current 64bit PHP5-MSSQL RPM from custom repository?
Workaround: Is there another way (or even different ways?) to connect to MSSQL server from PHP and if yes
I installed Open Suse 11.3, but no support mp3, mp4, dvd. The question is about openSUSE 11.X Addon NonOss. If I install this addon it has this support?
View 7 Replies View Related