I have installed ZendServer CE on my distro and I have tried to create a startup file in this way:I create the file httpd in the folder /etc/init.d
I run chmod 775 httpd
I execute chkconfig --add httpd on
But this is the message returned from system:
insserv: warning: script 'K01httpd' missing LSB tags and overrides
I cannot boot my 9.10 system as of this morning. I see these messages:
insserv: warning: script 'dbus' missing LSB tags and overrides
insserv: warning: script 'gdm' missing LSB tags and overrides
insserv: warning: script 'K20acpi-support' missing LSB tags and overrides
insserv: warning: script 's99webmin' missing LSB tags and overrides
/sbin/insserv failed, exit code 1
I then hear 2 or 3 faint clicks and I get a blank screen, with 2 faint lines at the top. I have been searching and trying to figure this out, but to no avail.
I am running KDE from the unstable repos and am having an issue with the Amarok included... output of rpm query on amarok
Code:
When I import my music folder into my amarok library I come up ~3000 songs short. When I load the same music folder into songbird 1.4 I am able to see the full library.
There appears to be no rhyme or reason to which songs' ID3 tags are not being read properly by Amarok and therefore are not appearing in my collection. I have tried removing my collection and rescanning, removing and re-installing amarok.. removing all amarok related folders from my .kde folders and reinstalling... yet I am still unable to get my full collection read by Amarok..
When I boot I get this error:
Starting CRON daemondone
Starting smartd done
Starting VirtualBox kernel moduledone
[code]....
New Intel x64 system installed with Opensuse 11.1 (like the KDE 3.5 option) and has been running well until today. Booting stops at "starting jexec services". Even while booting under "failsafe" system halts at "starting jexec services". Unable to boot to command prompt to attempt repair. Ran "repair" option from install disc with no good results. Still will not boot past jexec services.
View 2 Replies View RelatedApache is set to start on runlevel 2, 3 and 5, just like MySQL. For some obscure reason this always fails. I tried resetting the runlevels, but this did not help and I always have to start apache manually after reboot.
How can I analyze this problem? In the Apache logs I don't find the cause. Is there an other log I can check?
I have written a simple perl program to add a command to iptables. Here is my code :
Code:
#! /usr/bin/perl
print "Content-type: text/html
";
system("iptables -A FORWARD -s 192.168.0.2 -j DROP");
I put this file in cgi-bin folder of Apache server. Here is my problem : when I run this file with shell as root user it makes change to iptables, but when I use my browser to run this file, it doesn't make any change. I'm sure this is because Apache doesn't have permission to manipulate iptables. How can I start Apache as a user with root privileges ?
I've seen a few other posts well over a year or 2 old about hal.dll missing, and windows not dual booting with grub, but all of those involved resizing or moving partitions. This install i just did of opensuse 11.4 only involved formatting over a Ubuntu partition which already ran and dual booted windows xp with no problem (no problems during ubuntu install) I am hesitant to try any previous fixes posted in the forums as my issue doesn't seem to have come about for the same reasons. I thought windows and linux were playing well these days, guess not.
View 9 Replies View RelatedI've built my own kernel and now boot.preload complains about the missing preloadtrace.ko kernel module.
Where can one find the source for this module?
No matter if it is safe mode or regular the computer stops booting at Starting smartd I installed wine and samaba files (through Yast) before I restarted the computer and I was looking in FSTAB to get my HD's working. I didn't make any changes to FSTAB (I didn't even save the file).
View 1 Replies View RelatedI want to install my favorite player WMP11 in Linux, but the Setup fails in validation! i there a possible to force install wmp11 with wine in linux ? I have a lot of music in WAV + tagged with RIFF Tags, wmp can read riff tags...Amarok can't! is there another player that can read RIFF Tags from WAV files?
View 6 Replies View RelatedI installed OS11.4 on my old laptop, Compaq Armada E500., 512MB RAM, ATI Rage Mobility. During installation I chose "minimal server" and added some development packages, lxde and a little more. I chose to start in runlevel 3 which is full networking without X. Still, when computer is booted it tries to start Xorg which doesn't work because of some problem w driver. The start-up seems to stop there, it never loads completely - seems most things in runlevel 3 are not started (see below) I can manually login on laptop and fix it - but never permanently, same thing again after reboot.
I have checked /etc/inittab & yast - both states default runlevel is 3. I have checked services to be started both directly, browsing directory /etc/rc.d/rc3.d/, and with YaST, it is very clear X should not load during boot. But, as said, it does.. I don't really care about the driver problem right now, I can fix that later when I have more time. So how do I stop X from getting started automatically?
More info, if needed: The installation also stopped with message on tty1 "Starting YaST2" and tty8 showing errors with graphics driver (mach64). The system seemed to be installed though, so I simply rebooted (issuing "reboot" from tty2).
[Code]....
I'm not completely sure where it stops, network is configured but keyboard is wrong and mysql & everything after is not started, so somewhere between S02network and S06kbd. I'm going to use it as a server for testing purposes so no X is actually needed - however I do want to have X & lxde installed just in case, my Internet connection at home is terribly slow so I need most things I might need in the future installed today.
When I run libreoffice from the terminal as root, I get
Code:
Over and over for about 7 time and then
Code:
I've found several post referring to this error message, but the one's that were resolved, tended to include a reinstall, reboot and mysterious magic fairies fixing the problem.
I have a lot of avis with annoying metadata that show in vlc. Since I cannot figure out how to configure vlc in a way that it won't show the tags, ffmpeg should strip the tags. This is supposed to do the trick:
[Code]...
Not sure why, but the last couple of tiems I have started xampp from root terminal, I have got this message after each program start.
Warning a bogus unix line
Since that last time it was not there, other that add sweb spahes etc., I have only tried to unpack the Control Panel which was unsuccesfull anyway saying I needed some other programs.
I'm trying to install OpenSUSE on an external usb drive but when I boot from USB, all I get is a message saying "Missing Operating System". I've tried different ways of partitioning the drive either by letting OpenSUSE do it automatically or doing it myself. It's just a basic partitioning scheme, with swap on one partition sdb2 and the rest on root sdb1 .
I made sure to have GRUB be installed on the root partition of sdb (usb drive) instead of in the MBR (I've installed Fedora and Ubuntu on usb drives this way).
Running 11.4 x64, I've tried everything I can think of (which is not saying a lot) but I can't get sshd started on boot. Running /etc/init.d/sshd starts the service manually with no problem but I really need it started on boot.
I can't find anything different when comparing this instance with other similar instances where sshd does start but this instance is an update from 11.3 where sshd was not enabled and the others are all clean installs where sshd was enabled during installation, if that makes any difference.
I am currently running Suse 11.3. I continue to get the following error when logging into the KDE login manager with my user account
"Warning: Cannot open ConsoleKit session: Unable to open session. The name
org.freedesktop.ConsoleKit was not provided by any .service files."
After acknowledging the error, it resets back to the login manager screen. If I login with root, I get the same message, but it continues on and logins into the session
I just finished installing CentOS 5.2 x86_64 on a Dell Dimension 3100 (Pentium 4 with 64-bit support). On the first boot, after completing the final config steps (firewall, SELinux, time server, etc), the boot hangs on "Starting xend:". I have completed a successful installation on another Dell machine (different processor), with the same installation options (I recorded all of the steps and followed them for the second installation).
My boot commands in grub are:
root (hd0,0)
kernel /xen.gz-2.6.18-128.el5
module /vmlinuz-2.6.18-128.el5xen ro root=LABEL=/1 rhgb quiet
module /initrd-2.6.18-128.el5xen.img
i have on my server SUSE Enterprise 11 SP1 installed. When i try to install an rpm it displays this error:
warning: fftw3-3.1.2-113.1.src.rpm: Header V3 DSA signature: NOKEY, key ID
>943d8bb8
> 1:fftw3 ###########################################
[code]....
when i try to execute rpmorphan i receive this error, WARNING can not load translation file locale/en/rpmorphan_trans.pl
View 6 Replies View RelatedTwo days back I installed had setup subversion for my laptop from the following link HOWTO: Setting Up Your Own SVN Server (Using Apache and mod_dav_svn) - Mark S. Kolich
I don't know where I messed up the apache server. Now I am unable to start the apache server. I get the following error message:
I installed Apache, and it works fine. However, when I rebooted my CentOS, httpd did not start automatically. What do I need to do to ensure it starts when the system boots?
View 2 Replies View RelatedAfter installing proprietary graphics drivers for AMD A-50 APU graphics performance has been greatly increased. But two new problems have come up.
1. While playing video files clicking menus doesn't show anything, the video forcibly overrides the menus.
2. Videos always take the focus over other windows and applications.
For example, see the attached screenshot where actually terminal should come to the focus, but the video is overriding it.
I've been using ubuntu for a couple of years rather successfully on my dual-boot Vista/Ubuntu. It upgraded to 8.0(4?) LTS, 10.04LTS and I kept it there until this afternoon I followed the instructions on the ubuntu site to open up a terminal and update-manager --somearg to provide me with a nice little "Upgrade" button on the update manager. I clicked said button per the instructions, let it do it's downloading and whatever else it does. The last step of the installation is a system reboot. I let it do that, and then my grub menu comes up as more-or-less this:
Code:
Ubuntu 10.04 LTS, kernel 2.6.32-32-generic
Ubuntu 10.04 LTS, kernel 2.6.32-32-generic (recovery mode)
Ubuntu 10.04 LTS, kernel 2.6.24-28-generic
Ubuntu 10.04 LTS, kernel 2.6.24-28-generic (recovery mode)
Ubuntu 10.04 LTS, kernel 2.6.22-14-generic
Ubuntu 10.04 LTS, kernel 2.6.22-14-generic (recovery mode)
Ubuntu 10.04 LTS, memtest86+
Other operating systems:
Windows Vista/Longhorn (loader)
If I select the top one, I get:
Code:
Starting up ...
with a blinking cursor under the S for a LONG time (used the power switch after ~40 mins). I tried the second 2.6.32-32 option for recovery mode. It spit a bunch of gibberish to the screen for a couple seconds and then stopped, presumably doing the same thing, just with 100% more gibberish. I tried booting into Vista, that worked fine. Just to reiterate, I've not yet seen a 10 LTS login screen or desktop, and can't get one yet (just a "Starting up ...") Just to add, I did try searching, but since the only info I had to go on was 8 LTS to 10 LTS upgrade, and "Starting up ...", well those are just hard keywords to get any meaningful info.
When I try to start Apache2 (apachectl start) the command prompt returns right away. But when I check the processes (ps ax) I can't find httpd. And when I try to hit the server from a browser I get "the page cannot be displayed" error.
View 11 Replies View RelatedI have a problem, I'm have a course at high school (webserver management) in class this morning we had to install apache, php, ftp and so on but I didn't finish on time so when I got home I was playing around. I'm on wireless here and changed the vm connection from bridge to nat.
normally we had to install apache using yum (yum install httpd) and start the service. that's what I did and then we had to go to firefox (or IE) and type the ip of our server. but when I do I get "problem loading page" instead of the apache default page. I've set httpd runlever 2 to 5 to on and rebooted. but still not working.
I ran an update after installing the OpenSuse 11.2 Gnome Live CD and could not start Gnome.Signing in would only get me a blank screen with wallpaper.Changing the display manager in /etc/sysconfig/displaymanager to kdm (from the default gdm) resolves this issue for me:DISPLAYMANAGER="kdm"
View 2 Replies View RelatedI am using my OpenSuse 11.2 in VMware Workstation. I didn't do anything to it and when I open it, there is no more GUI coming up. Only command line interface came up. how can I change this back to GUI?
View 9 Replies View RelatedI have a HP mini 5101 wit OpenSuse 11.2. Unfortunately, I wanted to have a newer version 11.3, but I upgraded in a wrong way and the system not started any more, failed in start-up level 5 and ran the Kernel. I tried to find the solution, searched on google, but I think made it worse (personal feeling): made some changes in xconfig. Of course, the problem remained. Then I decided to make a system recovery. Everything was OK, until the last step, when the system prepared the first login. I saw this message for a few seconds:
Code:
*** Starting Yast2 ***
basename: missing operand
Try 'basename --help' for more information
SPP: could not open file: at /usr/share/sax/modules/SPPParse.pm line 61
When I switch on my netbook, during the loading everything seems ok, after loading I see the background but no login window, nothing. I don't know what's the problem.
I started the system recovery again and again. In few times I saw this on screen for a second, then return the background:
[Code]...
