I am new to openSUSE (and to Linux). I have try Ubuntu, Debian, Fedora and ended with openSUSE that seems to be the one I like. But I have some problem now. The system seems to hang on boot and after searching the Internet I found thread about ATI display driver (and I have ATI) so I installed ATI drivers. The system got worse and playing videos start to be not as it should be (and often freezing). I decided to uninstall these drivers to get my system back as it was but ended with more problem. Now my system don't start. I can boot in some kind of command prompt but nothing else.
Can I do something to restore the system or will I have to reinstall the system? I don't know if I want to reinstall it. I am using a very slow Internet-connection (air-card) and I have had so much headache on the other Linux (before I did end on openSuSE). I like openSuSE (even there is some minor things, like I cannot change my default browser to Opera, a Browser I have been using for almost 10 years but I still can use the Opera so it is a minor thing).
I had a triple OS xp 7 and Linux Open SUSE 11.4 the last one was the active partition.the grup boot loader used to provide a OS selection screen .any way , I cant boot my system after restoring a full disk image created by "Acronis TrueImage program" , what happens is that i get a BIOS message "there is no operating system insert disk and try again"however when i set winxp partation as active i can boot winxp againThere is some thing I'd like to ask for please ,when i install Linux : did it install grup boot loader on the master boot record or on the boot sector of the / partition ?
Hardware issue forced me to restore Win7. Installed EasyBCD to boot into openSUSE, no work. Boot puppy, it shows space where SUSE should be as unallocated space. I think Puppy doesn't see ext4 though. Can't boot live KDE off USB for some reason, though I originally installed from that exact medium. Tried ACPI=off and nomodeset. Error says trouble mounting clic filesystem, mounted as read only. Something like that. Then reboot 120secs, which it never actually does. I don't want to reinstall SUSE if I don't have to.
As I type this, I'm waiting (and waiting) (and waiting) for the Repair Tool Box, "Search For Lost Partitions" tool to stop running off of the install CD. I didn't actually mean to do that (I meant to select "repair file system!) and I don't see any way to abort it! How to I make it stop? (You can insert your best Deanna Troi voice there, if you like: "make it STOP!") Or do I just wait until sometime next week for this rascal to finish examining a THREE HUNDRED GIG partition, byte by byte . .. ?
It generally works fine - a couple of issues which I'm trying to get resolved elsewhere.My question is this: My laptop currently dual-boots Windows 7 and openSUSE, with openSUSE being the default. I have XP as a guest under VB. Is it possible for me to create a system image of the Windows 7 operating system, install W7 as a guest under Linux and then restore the backed-up OS so that I would have W7 as a guest (no more XP) but with the same configuration / apps as the original OS?In summary, this is wat I want to achieve:urrent:Dual-boot openSUSE 11.1 & Windows 7VBOx Guest = Windows XP Desired:Dual-boot openSUSE 11.1 & Windows 7VBox Guest = Windows 7 (identical config as the dual-boot version)
are there any sweeper / cleaner apps which can take back my installation as to when it was new. I know home directory could have config files etc..but that doesnt matter, i want all packages and applications reset to how it was when i had a clean install. I am using Natty
probably did something stupid.. just haven't figured out what yet.. hope someone can point me in the right direction. daughters computer broke, maybe virus, so i did clean reinstall of xp. decided to give her a couple of linux distros, thinking maybe they are safer for when she is surfing..
Used gparted to repartition hd:
Partition table entries are not in disk order
Installed Ubuntu 8.04. was then able to boot into either ubuntu or xp. next installed fedora 10. new menu.lst did not show ubuntu, only fedora and xp. had some lockups in fedora, and had to pull plug to reboot 2 or 3 times. replaced power supply. added ubuntu into menu.lst. boots into fedora and ubuntu fine. tried to boot xp, and get "Preparing System Recovery Option", then PC Angel appears, and it wants me to use the system restore option for xp.
Is there something i can do to recover xp without having to wipe the hd and reinstall xp, then reinstall ubuntu and fedora (and if i do all that, how can i be sure i don't end up with the same problem?
I wanted to know if there is variant of RollbackRX (www.rollbackrx.com.au) freeware or payable. RollbackRX used to Backup/Restore whole system changes in less than 1 minute before OS boot. And it does not consume a lot of free space.
In the past month my root folder has become corrupted 3 times. General system restore doesn't help and installing the default kernel doesn't help. I don't expect a forum to be able to help with the corruption issus but is there any way to restore root without a complete re-install? It's a little time consuming.
I am about to install a test machine for testing out system configurations and software modifications.Instead of installing a virtual machine I wish to create a secondary partition which holds a "restore image" of the "clean" system. Also I would like to be able to select a system restore function in Grub while booting.
After have the gui completly f***d up with an upgrade that messed up kde, I'm about to restore the original kde from the installation dvd (11.1) but there is no particular options to only restore kde, so I have concerns concerning some of those applications compiled and installed after the original installation (two years backward). I also updated the kernel to make things work with vmware...I don't want to loose time to recompile all the different stuff I need to work with linux.
Is there a way to be sure (by renaming /usr /bin /sbin for example) to keep the kernel alive (with libraries and headers) and all applications that were working very good before I did this update for kde (I won't do this again trust me)?The kde group never told me how restore kde from the original dvd so I'm a little disappointed because the system is working ok in run level 3.only kde is dead.I'll dig deeper before doing the reinstallation of suse 11.1...
I do regular full and incremental backups using dar. All disk volumes are labeled and mounted by label. There is no other operating system installed. I built a new system but due to having to RMA a disk, I built the openSUSE system on a disk from the backup cycle. This Maxstor disk has problems which is why it was moved into an external box and the backup system. I now have a replacement disk and wish to replace the Maxstor before it dies. I initially tried a disk to disk clone with clonezilla but this died complaining that a small target partition was smaller than the source partition. It had created the partition and the start and end sectors were identical. There are no problems with the new disk.
I decided that it would be a good opportunity to test a full system disk restore from the backups. I have in the past restored individual files and partitions but have never restored onto a bare boot disk. I have restored and labeled all 6 partitions. The partition containing / has been marked as active. /boot is included in the partition containing /. fstab is valid, menu.lst is valid, device.map needs editing but this is not a problem.
What do I need to do to make this disk bootable. I have looked through the GRUB documentation but if you try some standard GRUB commands in 11.3 you get messages saying don't do this use YAST. I have seen other suggestions ranging from trying to start the not supported system repair option to using dd to copy the MBR which seemed to trash the partitions in the users extended partition.
The YAST bootloader displays "boot from the root partition". I assume that this is currently what is happening rather than what YAST thinks might be a good idea for next time. I suspect that all I have to do is dd the first 512 bytes of the root partition. If this is the case I can add this to the backup process. While I automate backups I do not automate restores. Each restore tends to be different and I am not sure of the best way getting grub to work on a bare disk restore.
My problem is that I have installed openSUSE 11.2 on a laptop with Windows 7 already installed. Yast resized my Windows partitions, which seemed to upset Windows as I had to go to my Windows Recovery Disc to restore it. When Windows was restored it did something so that GRUB no longer appeared. So I did a system recovery for openSUSE 11.2 which then removed Windows 7 from GRUB! Now I'm trying to restore Windows 7 and configure GRUB so that Windows and openSUSE will stop fight for boot supremacy and play nice with each other. Here are my Yast2 Boot Loader settings:
Section Management Settings SUSE LINUX (type)image (/dev/sda6, root=dev/disk/by-id/ata-ST9320320AS_5SX4PRAS-part6) Failsafe SUSE LINUX (type)image (/dev/sda6, root=dev/disk/by-id/ata-ST9320320AS_5SX4PRAS-part6) Boot Loader Installation Settings Boot Loader: GRUB Boot Loader Location: Boot from Extended Partition Disk Order: /dev/disk/by-id/ata-ST9320320AS_5SX4PRAS
I have used Ubuntu 8.04 and uprgaded to the new 9.10 both using the gneom desktop. I wanted to work with KDE and SUSE so I bought the Linux Format magazine with the DVD 126 which had SUSE 11.1 with the KDE desk top. I have a Toshiba L455 laptop and had windows 7 on 110 gb and had ubuntu 8.04 on 50 gb and ubuntu 9.10 ob 48 gb. I had ran the installer and it identified both linux systems and I selected to install SUSE in the space allocated to 8.04. It only boots to suse with the option to select windows. It showes 9.10 mixed with suse. I have not used suse. Is there an uninstall that will allow me to start over with the installation after creating a partition first. How can I get 9.10 to boot or how can I recover data from it.
I was messing with some boot loaders which accidently disabled grub and I was remained with windows 7 boot loader only.How can I restore grub?I am using Opensuse 11.3
I installed Gnome 3 on a free partition of my netbook but I lost the boot to my suse kde...(MBR). I launched a live CD on USB but cannot restore Grub; the only way is to reinstall the KDE. Then it boots but does not show Gnome 3. Why the installer does not take into account both OS?
After one of the updates (the same day as the kernel was updated) my Startup Theme has been changed from standard SUSE light-green to a dark SUSE EDUCATION.
I'm not talking about GDM logon (this is OK) and not about Bootloader screen (also OK).
I meant a progress of the SUSE loading.
I have Open SUSE 11.1 with GNOME and some software from EDUCATION repo but not a Education release.
After a forced reinstall, I find myself missing the desktop folder which I can live without. However, I reallty need right mouse button functions. How can I restore them?
I think I made one tweak too far and as a result have lost my desktop - no top panel, launcher just a blank screen with my desktop background. I've created a new user and everything is fine under that account so I don't think it is terminal. which files I should delete/replace to restore the desktop back to it's default settings? I've deleted the .gnome2, .gconf and .gconfd folders but that has not solved the problem.
I am trying to restore my system to Ubuntu 10.10, using a system backup made with REMASTERSYS. When I reboot, I get the message: GRUB error:15 I found many threads discussing this issue, most notably here: [URL]
My problem is that I need to move a moderately complex system from an old system to a new system. The old system is a core 2 duo running on an asus p5k-se (p35 chipset) M/B, Nvidia 8500 gt, 3 x sata II hard disks, 1 x sata dvd, 1 x ide hd, 4GB ram. It runs opensuse 11.1 kde 4 as a desktop system + samba server, apache server, database server + other non-opensuse software. In addition some of the opensuse software is not the default 11.1 versions as later versions were required. The nvidia driver is from the nvidia repo. There are several file systems, some under LVM.
The new system will be a core5 760, asus p7p55d-e M/b (p55 chipset), nvidia 240, 3 x sata II HD, 1 x sata dvd, 4GB ram and possibly 1 x ide HD. This M/B also includes USB 3 & sata III. I have no USB 3 devices but this may eventually change. I have no plans for sata III and believe that it may be better to attach any sata III SSD to the sata II bus.
What I would like to do is to move the hard disks from old system to the new system. What I would like to know is, if the system is left at 11.1, is the system likely to work with the new hardware. If the answer is no, if the system was upgraded to 11.3, would the transfer of the hard disks then work? In order to upgrade from 11.1 to 11.3 using the DVD i believe I should get rid of all non-default repos. I assume that I should also get rid of anything that was installed from them, e.g. the nvidia driver and any software versions installed manually outside RPM. Also is there any default 11.1 software that should be removed either before or after the upgrade to 11.3
Recently I've backupped my entire /home folder on my laptop with grsynch trough ssh.Since I already had a simply text file containing all installed programs, I figured 'then, when i go from the backup trough my desktop, all my program settings will be restored if i run the txt file to install all those programs first.So i installed al programs, then i went from backup to /home on desktop, logged out and back in. Started up a random program (tried thunderbird and filezilla) and no settings were to be found.In retrospect, docky did start, but didnt have all the launchers i had on my laptop. so that could have been a clue.
I tried to update one of my home machines with a fresh install. This is far from new to me so I did not expect any problem. But I was proven wrong. First: did install the system as usual. First anomaly: system blocked during the install process but did restart it flawlessly one I tried to eject the DVD from the player. It needed actually that intervention to retake working. It then went to install and froze during the first system start. I rebooted with failsafe settings, it then correctly configured. I reached a beautiful desktop. I performed the updates from the update repository and I joined the nvidia proprietary driver repository (which updated to the G02 driver).
I then rebooted the machine and now I am in trouble. In normal mode the system (dual boot Opensuse, XP) does not boot at all and freezes immediately after hitting enter as before. In safe mode it goes further but does not reach X anymore. It blocks with the following line statement: "system console stolen at line 266". I then tried "startx". But the system goes into a scrolling loop that does not allow me to read the output. how to get at least the error message of the loop? I read some line passing by that the system might have an X11 authorization problem.
Athlon Phenom X4 905e Nividea G7600 graphic card Former system installed and running flawlessly: 11.1
I'm new to openSUSE, this is the first time i try to install openSUSE version 11.4. on my IBM Thinkpad T43 (on which SUSE Linux version 8.0 has been running before without problems). I have downloaded the ISO images and successfully burned the ISO images on a blank DVD. Having placed my openSUSE DVD in the drive and rebooted my laptop I can see the boot screen.
I then select installation with arrow up/down and press enter. Choosing language and keyboard layout works fine, as well as accepting the license agreement. However, when it comes to 'System Probing' the installation stops at 'Search for system files'. The cursor shows a little turning disk but the rest of the screen is blocked.
I use release 11.2 and this one works very well. I try new release 11.3 and my system crash when I wont to start system on runlevel 5. There is Sempron 2 GHz CPU and nvidia fx550 graphics card. Keyboard PS2 does not responds but mouse on USB work well. When I start "safe" boot option system work well. What I can to do ? What I must change
we have a server running with Suse linux many years. Meanwhile we changed server hardware about 4 times, mostly also updating to newest Suse version. We used to copy group, passwd and shadow to a backup medium, installed the new system and restored those files onto the new system and all was running fine. Now, some weeks ago we installed 11. on new hardware and after restoring those 3 files after rebooting the system hangs when starting GUI. I can boot into runlevel 3 and login with no problem, but when I boot into runlevel 5 mouse and keyboard are frozen. Also when starting GUI from runlevel 3 with startx mouse and keyboard immediately freeze. If I restore the files group, passwd and shadow as they came from fresh new installation I can reboot and login in runlevel 5 without problems.
OK, if I compare the userlist, as it is generated bei installation,there are some usernames I formerly not had in older Suse versions. I don�t know if this can make problems? I tried to edit the files, to combine the system users from 11.2 with the list of local user names from the old system but without success, again the mouse and keyboard freeze.So some questions arise:1) Why now mouse and keyboard freeze in xsystem, when there are changes in the user list (but only in runlevel 5)2) What is the correct way to save and restore users and groups from old to new system. I googled several hours but did not find a smart way. Maybee someon can point me to a link or a howto where I find the solution
I created Live USB with OpenSUSE 11.3 using "hard way" method from FAQ, i.e. using dd command. Now I want to delete OpenSUSE from USB stick. I have Kubuntu installed, so I follow the steps described in here, but I can only create 1Gb partition on my stick while it has 2Gb capacity. KDE Partition Manager also only shows 1Gb on the USB stick. What is going wrong?
PS. Similar issue is described in [URL]..But mine is slightly different.
First off, Ubuntu 10.4 is working great on my new laptop and I really enjoy it. And it is super fast. My question is now that I have everything all set up, all my packages, my windows settings, and my ATI driver, my updates, etc., I want to be able to keep it all. Maybe somebody could point me in the right direction or give me some better terminology. Would love to learn more about distros in the future. For now I just don't want to have to do all this updating again. There are a few things I have found like Clonezilla and others, but they seem to be a bit advanced and more for servers.
