It generally works fine - a couple of issues which I'm trying to get resolved elsewhere.My question is this: My laptop currently dual-boots Windows 7 and openSUSE, with openSUSE being the default. I have XP as a guest under VB. Is it possible for me to create a system image of the Windows 7 operating system, install W7 as a guest under Linux and then restore the backed-up OS so that I would have W7 as a guest (no more XP) but with the same configuration / apps as the original OS?In summary, this is wat I want to achieve:urrent:Dual-boot openSUSE 11.1 & Windows 7VBOx Guest = Windows XP Desired:Dual-boot openSUSE 11.1 & Windows 7VBox Guest = Windows 7 (identical config as the dual-boot version)
Does Ubuntu have an equivalent to system restore like windows?
I just want to know what the best way is to save everything , as in settings and programs etc. , just in case there's some sort of major failure.
Any ghosting programs that will allow me to save the last known good configuration? or clone the entire drive?
Since I've been using Ubuntu I haven't run into any major screwups like with windows , but there are some times I've installed it and it took a while to get different things working. I don't want to have to go through the whole process again if there's ever a major malfunction.
I am using virtualbox to run windows xp.is there a way to access the harddisk occupied by linux and copy the information to the virtual memory in windows xp
Allot of Crazy things happened lately. A few problems happened and I fixed them. In the end I have 3 partitions of ubuntu net book remix and 1 for windows 7. I never reinstalled windows so could I do a system restore (in windows)to go back and then reinstall 1 partition of ubuntu net book remix.
I am new to openSUSE (and to Linux). I have try Ubuntu, Debian, Fedora and ended with openSUSE that seems to be the one I like. But I have some problem now. The system seems to hang on boot and after searching the Internet I found thread about ATI display driver (and I have ATI) so I installed ATI drivers. The system got worse and playing videos start to be not as it should be (and often freezing). I decided to uninstall these drivers to get my system back as it was but ended with more problem. Now my system don't start. I can boot in some kind of command prompt but nothing else.
Can I do something to restore the system or will I have to reinstall the system? I don't know if I want to reinstall it. I am using a very slow Internet-connection (air-card) and I have had so much headache on the other Linux (before I did end on openSuSE). I like openSuSE (even there is some minor things, like I cannot change my default browser to Opera, a Browser I have been using for almost 10 years but I still can use the Opera so it is a minor thing).
I had a triple OS xp 7 and Linux Open SUSE 11.4 the last one was the active partition.the grup boot loader used to provide a OS selection screen .any way , I cant boot my system after restoring a full disk image created by "Acronis TrueImage program" , what happens is that i get a BIOS message "there is no operating system insert disk and try again"however when i set winxp partation as active i can boot winxp againThere is some thing I'd like to ask for please ,when i install Linux : did it install grup boot loader on the master boot record or on the boot sector of the / partition ?
are there any sweeper / cleaner apps which can take back my installation as to when it was new. I know home directory could have config files etc..but that doesnt matter, i want all packages and applications reset to how it was when i had a clean install. I am using Natty
openSUSE, just installed 11.2 some days ago and have several problems with kernel 2.6.31 and my hardware, i was wondering if there is a way to upgrade it to version 2.6.32... that i know i dont have any problems with it.The problems that i have is with my ath9x driver, iv'e experience it before with other distros and the same kernel (2.6.31)Another question i have is about VirtualBox, i use it to run windows, and i'm amazed of the lack of speed and performance i have in openSUSE, i dont know if it's because i'm doing something wrong, quite possible since i'm not familiar with the -suse way- of using linux... i read the wiki about virtualbox made all that it's said (used OSE and non-OSE) and nothing changed... it's unusable. i used to use it in other distros with no problems, but in suse i have alot of issues.
apart from all the issues i have concerning speed and performance in openSUSE it's worth of a try.hope that configuring it better will speed up and increase performance.btw, i have a amd athlon x2 2.1ghz, ati radeon hd3200 using fglrx module and 4gb of ram.
Hardware issue forced me to restore Win7. Installed EasyBCD to boot into openSUSE, no work. Boot puppy, it shows space where SUSE should be as unallocated space. I think Puppy doesn't see ext4 though. Can't boot live KDE off USB for some reason, though I originally installed from that exact medium. Tried ACPI=off and nomodeset. Error says trouble mounting clic filesystem, mounted as read only. Something like that. Then reboot 120secs, which it never actually does. I don't want to reinstall SUSE if I don't have to.
My problem is that I have installed openSUSE 11.2 on a laptop with Windows 7 already installed. Yast resized my Windows partitions, which seemed to upset Windows as I had to go to my Windows Recovery Disc to restore it. When Windows was restored it did something so that GRUB no longer appeared. So I did a system recovery for openSUSE 11.2 which then removed Windows 7 from GRUB! Now I'm trying to restore Windows 7 and configure GRUB so that Windows and openSUSE will stop fight for boot supremacy and play nice with each other. Here are my Yast2 Boot Loader settings:
Section Management Settings SUSE LINUX (type)image (/dev/sda6, root=dev/disk/by-id/ata-ST9320320AS_5SX4PRAS-part6) Failsafe SUSE LINUX (type)image (/dev/sda6, root=dev/disk/by-id/ata-ST9320320AS_5SX4PRAS-part6) Boot Loader Installation Settings Boot Loader: GRUB Boot Loader Location: Boot from Extended Partition Disk Order: /dev/disk/by-id/ata-ST9320320AS_5SX4PRAS
I wanted to know if there is variant of RollbackRX (www.rollbackrx.com.au) freeware or payable. RollbackRX used to Backup/Restore whole system changes in less than 1 minute before OS boot. And it does not consume a lot of free space.
As I type this, I'm waiting (and waiting) (and waiting) for the Repair Tool Box, "Search For Lost Partitions" tool to stop running off of the install CD. I didn't actually mean to do that (I meant to select "repair file system!) and I don't see any way to abort it! How to I make it stop? (You can insert your best Deanna Troi voice there, if you like: "make it STOP!") Or do I just wait until sometime next week for this rascal to finish examining a THREE HUNDRED GIG partition, byte by byte . .. ?
Observed on two host systems both with openSUSE 11.3 32 bit using ext4: When a big files, in this case a 1.2 GB and a 1.7 GB is copied from DVD, usb harddrive or shared folder into a Windows 7 32 bit guest system, the copied file is corrupted. The md5sum has changed and until the guest system has been rebooted successive md5sum tests on the same file comes up with various results... After a reboot md5sum tests show consistent results, but a sum different from the original file.
I am trying to restore my system to Ubuntu 10.10, using a system backup made with REMASTERSYS. When I reboot, I get the message: GRUB error:15 I found many threads discussing this issue, most notably here: [URL]
Background: I'm a 20+ year Mac user, switched four years ago to Linux.I have NO experience with Windows to speak of. Whenever I've gotten a new box, it's either been home-built or a Mac.Now I have a new Acer Aspire AS7551 laptop, and although I have not yet booted into Windows, it comes with a Windows 7 Home Premium license. I've been running it with Ubuntu 10.04 off a flash drive and everything works perfectly.
What I want to do: I want to wipe the disk, install Lucid, and run Windows in Virtualbox (for the sole purpose of watching some Netflix and learning a little bit about Windows 7). For the purpose of this question, please accept that I DO NOT want to dual boot.The problem: From what I can find, I can't use the "recovery discs" that came with my laptop to create a virtual machine. This is confusing, because it seems like I paid for a legitimate Windows license for use with this laptop.
Questions:
1. Would MS exchange my recovery discs for a regular install disc to go with my license code if I explained this to them?
2. If not, is there a source for Windows ISOs that I can safely use with my license? (I am aware that the legitimacy of that approach is questionable, but I am quite comfortable with the ethics since I paid for Windows 7, own the license, and only want to use it on the same computer.
3.If not,is there any way in heck I can use my recovery disc to create something Virtualbox can work with?
4. If not, how are all of you people getting your Windows virtual machines going??
(I have read that Acer is a major hassle to get a refund from for the "Windows tax" so I might as well be able to use it--this is MS' chance to win over a fan if only they will let me!)
Recently I've backupped my entire /home folder on my laptop with grsynch trough ssh.Since I already had a simply text file containing all installed programs, I figured 'then, when i go from the backup trough my desktop, all my program settings will be restored if i run the txt file to install all those programs first.So i installed al programs, then i went from backup to /home on desktop, logged out and back in. Started up a random program (tried thunderbird and filezilla) and no settings were to be found.In retrospect, docky did start, but didnt have all the launchers i had on my laptop. so that could have been a clue.
My goal is to install Windows 7 on a virtual machine running on Ubuntu. The Lenovo machine came with Windows 7 installed, but did not come with a boot disk. What are my options? Should I ask Lenovo for a disk? Will I need to purchase Windows just for the virtual machine?
Should I use XEN or VirtualBox to host linux on windows 7 or windows 7 on linux? Since I've read about the problems of reading/writing NTFS disks with linux usnig the Linux NTFS driver, I thought it would be better to host windows on linux. I think the problem is that you never can be sure if the linux NTFS driver is going to corrupt your disk because Microsoft does not publish the format for linux developers.
By running windows on linux, I could read and write EXT3 from windows. I think there are EXT3 drivers for windows. Then I got to thinking: If I am running Linux on Windows, am I going to be using SAMBA or the linux NTFS driver? I think I'm going to be using SAMBA to read and write the linux partitions -- correct? Are there other considerations when deciding to host linux on windows or windows on linux? I'm going to using both the linux and windows partitions for software development with java/eclipse and various databases including oracle.
I was trying to install VirtualBox through the YaST > Software Management but it is not working, someone in the forum told me that I have to download the OSE version and do it manual way. Finally I am able to start up VB but not able to use the network connection. Thus I am trying to do this:
/etc/init.d/vboxdrv setup. I get this error:
[code]...
When I type dmesg, it shows me a bunch of info which I don't know what should look for. When I type modprobe vboxnetflt, I get the error: FATAL: Error inserting vboxnetflt (/lib/modules/2.6.37.1-1.2-default/updates/vboxnetflt.ko): Invalid module format. what should I do in order to get my VB to be able to connect to the internet?
First off, Ubuntu 10.4 is working great on my new laptop and I really enjoy it. And it is super fast. My question is now that I have everything all set up, all my packages, my windows settings, and my ATI driver, my updates, etc., I want to be able to keep it all. Maybe somebody could point me in the right direction or give me some better terminology. Would love to learn more about distros in the future. For now I just don't want to have to do all this updating again. There are a few things I have found like Clonezilla and others, but they seem to be a bit advanced and more for servers.
A friend has a netbook running a dual boot setup with Ubuntu (9.10, I think) and Windows XP. She recently decided to run system restore on the Windows partition and can't boot into Windows anymore. I told her I would help her fix it tonight, but before she gets here I figured it would probably be helpful to ask if this is a well known issue and if anyone has any suggestions on the best method of fixing it.
I planned on first making sure the grub is targeting the Windows partition correctly, but I suspect the problem could be that the system restore point she used was one from before she had a linux partition. If that is the case does anyone know if this could potentially destroy the windows installation?
I was installing mail server on a desktop for just experimentation using sudo tasksel command. I selected the second option that says mail sending using internet. During installation it asked for something about phpmyadmin, which was already installed on my system. I selected no, and then during installation it removed all the utilities from my system and now system startups in terminal mode. I have some very important data on that system that i can't afford to lost. please help me out so that i can again start the system in normal graphical mode or tell me a way so that i can transfer my data to anyother media.
I restored my laptop to an image created the 1st time I used the laptop. Since restoring the system won't load. After the initial boot screen and check to boot from cd it just resets. It never makes GRUB menu were I can choose the OS I want. I'm dual booting Vista and ubuntu but can't get into either.
I have had Kubuntu installed for quite some time, I very rarely use it because of my dependanacy on windows but frequently boot up Kubuntu to do updates.A few days ago, I tried to boot Kubuntu and it comes up in command line only, I login but it stays at the command line, no KDE.On the boot list I have Ubuntu 2.6.32-21-generic.I have gotten used to using KDE and now I need to use Linux but am not command line fluent.
I am using 11.2 suse with gnome in vmware player on windows 7. I can drag and drop indivisual files from windows to suse and vice versa but Can I mount the whole windows file system in Suse.
Is there an actual How-To or something like it about sharing data between linux system(s) and MS Windows XP?I do not think there is a golden path but maybe a list of possibilities and their pros and contras would be fine. As I understood there are different ways of sharing data (and so of setting the partitions)
1. Accessing the data of a MS Windows (NTFS) partition from a linux system (contra: possible data loss/data corruption?).
2. Accessing the data of a linux (ext3) partition form a Microsoft system (XP) (contra: possible data loss/data corruption?).
3. Sharing a data partition (FAT ?) (contra: problems with large files).
4. Visualization (contra1: If the main system gets broken, the guest is broken, too?; contra2: not so easy?; contra3: windows male ware in linux?).
I am thinking about reorganizing my hole system of sharing data and of partitions (including my NTFS partition for XP data and FAT partition for data shared with XP and linux).Now I am using mostly a FAT partition for sharing data but this seems to me not the way (for big files and especially because of data security).
I thought of making my /home partition bigger and use a windows program to get excess to ext3/ext4 from MS XP. I also thought of deleting my hole NTFS data partition and use only /home with document-folders etc. for each user / for the linux users and for the Mircosoft users. But this seems not so wise jet from I have read (at least not with an ext4 data partition):
[all variants] ext4 support on Windows XP - Ubuntu Forums Ext2read - View ext2/3/4 partitions from Windows
I have a sony vaio netbook and installed ubuntu on it some months ago After some weeks windows 7 crashed and stopped booting I tried to recover it but still no success. When i bought it it had one partition only (plus the first one for windows recovery) When I installed ubuntu I partitioned my hard drive at my pleasure as you can see in attached image When I try to recover windows 7 it says it "can't find the windows partition or it's too small" Since 80 gb is not too small, i bet it can't recognized the partition anymore. Can anybody suggest a way to let it recognize my sda2 ? Does it have to have the "C:" label or "Windows something"? (I can only name it C without colons) Does it have to formatted FAT in a particular way ?
My setup is like this: * Installed Windows 7 on primary (SATA) hard drive * Installed Ubuntu 11.04 on secondary (IDE) hard drive
I've worked with Wubi before, and I liked it so much, I decided to go full scale with Ubuntu. However, I think I've missed an option in the setup, because Grub has now taken over my bootloader. I tried reverting to the Windows loader with EasyBCD, but booting Ubuntu from there is impossible, since it doesn't show itself. By the way, I don't really understand EasyBCD, so that makes it even harder. Anyway, what I'm trying to accomplish here, is to get a bootloader which uses Windows as default and Ubuntu as secondary OS. How do I do this?
I am running Fedora 13, I have installed virtual box that is running Windows 7. I am attempting to run a few star wars video games. Everything works in the virtual machine however it doesn't see any 3D hardware therefore not letting me run these games. I had W7 installed on the computer before and I love fedora and I don't want to dual boot. Is there anyway that anyone knows how to get this working or is there another program that can run a virtual machine for me? Quick update, I installed somethings using the Device menu and Install Guest Additions. That go some mouse and a better video resolution to work however, when using dxdiag in Windows 7, it says that the 3D Acceleration is unavailable. In the settings I have 3D accelration enabled of course.
