OpenSUSE Install :: Restore Windows 7 And Configure GRUB?
Jan 29, 2010
My problem is that I have installed openSUSE 11.2 on a laptop with Windows 7 already installed. Yast resized my Windows partitions, which seemed to upset Windows as I had to go to my Windows Recovery Disc to restore it. When Windows was restored it did something so that GRUB no longer appeared. So I did a system recovery for openSUSE 11.2 which then removed Windows 7 from GRUB! Now I'm trying to restore Windows 7 and configure GRUB so that Windows and openSUSE will stop fight for boot supremacy and play nice with each other. Here are my Yast2 Boot Loader settings:
Section Management Settings
SUSE LINUX (type)image (/dev/sda6, root=dev/disk/by-id/ata-ST9320320AS_5SX4PRAS-part6)
Failsafe SUSE LINUX (type)image (/dev/sda6, root=dev/disk/by-id/ata-ST9320320AS_5SX4PRAS-part6)
Boot Loader Installation Settings
Boot Loader: GRUB
Boot Loader Location: Boot from Extended Partition
Disk Order: /dev/disk/by-id/ata-ST9320320AS_5SX4PRAS
[Code]...
View 9 Replies
ADVERTISEMENT
Jun 18, 2011
Iv looked around for the tutorials but none of them worked i keep getting errors.
Can someone just guide me from the top?c
View 1 Replies
View Related
Nov 5, 2010
I do regular full and incremental backups using dar. All disk volumes are labeled and mounted by label. There is no other operating system installed. I built a new system but due to having to RMA a disk, I built the openSUSE system on a disk from the backup cycle. This Maxstor disk has problems which is why it was moved into an external box and the backup system. I now have a replacement disk and wish to replace the Maxstor before it dies. I initially tried a disk to disk clone with clonezilla but this died complaining that a small target partition was smaller than the source partition. It had created the partition and the start and end sectors were identical. There are no problems with the new disk.
I decided that it would be a good opportunity to test a full system disk restore from the backups. I have in the past restored individual files and partitions but have never restored onto a bare boot disk. I have restored and labeled all 6 partitions. The partition containing / has been marked as active. /boot is included in the partition containing /. fstab is valid, menu.lst is valid, device.map needs editing but this is not a problem.
What do I need to do to make this disk bootable. I have looked through the GRUB documentation but if you try some standard GRUB commands in 11.3 you get messages saying don't do this use YAST. I have seen other suggestions ranging from trying to start the not supported system repair option to using dd to copy the MBR which seemed to trash the partitions in the users extended partition.
The YAST bootloader displays "boot from the root partition". I assume that this is currently what is happening rather than what YAST thinks might be a good idea for next time. I suspect that all I have to do is dd the first 512 bytes of the root partition. If this is the case I can add this to the backup process. While I automate backups I do not automate restores. Each restore tends to be different and I am not sure of the best way getting grub to work on a bare disk restore.
View 9 Replies
View Related
Nov 4, 2010
I was messing with some boot loaders which accidently disabled grub and I was remained with windows 7 boot loader only.How can I restore grub?I am using Opensuse 11.3
View 8 Replies
View Related
Apr 13, 2011
I installed Gnome 3 on a free partition of my netbook but I lost the boot to my suse kde...(MBR). I launched a live CD on USB but cannot restore Grub; the only way is to reinstall the KDE. Then it boots but does not show Gnome 3. Why the installer does not take into account both OS?
View 8 Replies
View Related
Nov 29, 2010
I installed in ubuntu 10.04 in my laptop
yesterday i needed windows and had to install it
so right no am unable to boot in ubuntu without my live cd
when i was installing ubuntu eather unchaked to install the bootloader or i installed it not on partition but starit on the drive on the /sda
am able to boot in my ubuntu with the live cd by typing in parameter :grub.
i really need grub boot loader in this computer to be able to chose to boot in windows or ubuntu
i tried couple of instructions and always goat some headache.
View 2 Replies
View Related
Apr 27, 2010
I have a used PC that came pre-installed with suse 11.2.Unfortunately, I do not have the install disk to use in case of whatever.I already know that when configuring a dual boot with Windows and Linux, it is recommended to install Windows first.I do not have that luxury now as 11.2 is installed and GRUB is the boot loader.Question is, if I boot the Windows 98 install disk on boot, how to not mess up GRUB and still add Windows 98 to GRUB menu?
One hard drive only here. 98gb free.It seems that W98 install will overwrite GRUB in this situation - causing problems. Maybe not, I don't really know for sure.I just need to install windows 98 on the same hard drive and if possible, have suse and w98 visible on boot in GRUB.
View 9 Replies
View Related
Dec 26, 2009
have an Intel Core2 Duo system that would dual boot via GRUB between Windows Vista and Fedora 10. I recently attempted to upgrade from Vista to Windows 7, however because the version of Vista I had would not upgrade to Windows7. This has removed the ability to boot into my Fedora 10 installation. After some brief research on the Internet, I created a Live CD of Fedora 12, and booted into that. Accessing the terminal I tried typing:
[liveuser@localhost ~]$ su root
[root@localhost liveuser]# grub
Probing devices to guess BIOS drives. This may take a long time.
GNU GRUB version 0.97 (640K lower / 3072K upper memory)
[ Minimal BASH-like line editing is supported. For the first word, TAB
[code]....
Error 15: File not found
What is needed so I can restore GRUB on my system and boot into Fedora again?`
View 11 Replies
View Related
Sep 1, 2010
I need to use the fixmbr command to fix my windows installation. I'd like to restore grub to its former state after doing so. I have searched how to do this and since my configuration differs slightly, I'd rather get more specific instructions. Right now this is what menu.lst looks like:
Code:
titleUbuntu 8.04.1, kernel 2.6.24-21-generic
root(hd0,2)
kernel/boot/vmlinuz-2.6.24-21-generic root=UUID=0c5d1c9c-70bb-4f61-a0ad-7dc5e59d9713 ro quiet splash
[Code]....
View 3 Replies
View Related
Oct 31, 2010
Is there any way to simply remove grub? Does GRUB reside in a specific partition? Do I have to just delete the partition that has GRUB on it?The way my bootable partitions work is something like this.
1)Installed Vista
2)Installed Ubuntu
3)Thought I removed GRUB
4)Put in new HDD(1) and installed Win7 onto it
5)Put in another new HDD(2) and put another Win7 onto that (but I disconnected every other HDD so that the bootloader would be written onto the new HDD(2). When I have all my HDD's plugged in now, I get a GRUB load error (I think it's 21).
View 4 Replies
View Related
Jan 15, 2010
Basically, I used a USB stick to run ubuntu 9.10 live, then tried to install to an external 500gb HDD connected with a Sharkoon Drivelink USB adaptor. The installation went fine, but I get a GRUB error 21 when booting a lot of the time. I figure this is due to the way in which the drive is connected. I am a complete noob, and I want to just ove GRUB completely and restore my Vista bootloader. Unfortunately, I do not have an installation disk as my laptop didn't come with one, and none of the others I have other PC's are the same version (home premium 32-bit).If you know of a way to fix the GRUB issue/sso I can use the external drive I would love to hear them too, but the main aim of this thread is to help me remove GRUB and restore the windows bootloader. If any more information is needed, just ask and I will provide it.HP Touchsmart TX2-1010Windows Vista Home Premium 32-bitExternal HDD:Seagate Barracuda 7200.11 SATAII (with jumper set for 150mbps)
View 2 Replies
View Related
Oct 24, 2010
I just made my system unbootable... Here is what i did.. I have two sata HDDs
160 GB (Contained Windows 7)
500 GB
I copied entire 160 gb as an mirrored image to 500GB HDD using Acronis Disk Director. I deleted entire 160 GB HDD.. Removed the 500 GB HDD and kept it seperate.. Installed ClearOS Enterprise 5.2 Worked a little bit... The i wanted to delete ClearOS.. So i connected 500GB HDD and booted again in Acronis Disk director Formated the entire 160GB HDD.. Copied back the entire 160 from 500GB HDD.. Now my sytem refuses to boot... Just 4 letters "GRUB" appears on the screen... I tried booting using XP CD.. It gives a blue screen.. I tried Windows 7 CD.. It says unable to fix due to MBR problem..
View 8 Replies
View Related
Jun 22, 2010
I had i a dual boot win. 7 and ubuntu 9.10,recently i had some problem in my windows os so i restored the c drive to factory settings since both operating systems where in c drive so when i tried to boot grub was showing problem.the information displayed was loading grub, the file does not exist rescue grub> so what should i do to restore grub so that i can boot again into windows 7 and ubuntu without loosing my data.
View 1 Replies
View Related
Nov 26, 2008
I just installed OpenSuSE 11 and after it was done installing and i rebooted, Windows doesn't show up on the boot screen I only get the default OpenSuSE and Fail Safe options.
All i know is that vista is on sda3 when i partitioned my drive. Here is my menu.lst entry for windows:
###Don't change this comment - YaST2 identifier: Original name: windows###
title windows
rootnoverify (hd0,8)
chainloader (hd0,0)+1
View 9 Replies
View Related
Dec 25, 2009
Since i installed opensuse 11.2 when i boot my pc, grub doesnt show me windows to boot only opensuse and failsafe this is my details code...
View 9 Replies
View Related
Jan 26, 2010
i just installed openSUSE on my machine which had windows 7 in other partition as primary partition. Now after rebooting i see the green screen showing only 2 options
-Desktop -- openSUSE 11.2 -***
-Failsafe -- openSUSE 11.2 -***
how do i get my windows 7 in the list.
View 9 Replies
View Related
Jul 5, 2010
I've just installed windows on my computer for gaming, since it took over the boot loader I went into the repair system function of the opensuse DVD. Now I'm back in linux but no windows partition is showing up on the grub menu. This is the output of fdisk -l how do I make it so grub sees my windows too? This is probably an easy fix but I'm a prior ubuntu guy and just started playing with suse which seems a bit more tech savvy and less forgiving then ubuntu. code...
View 1 Replies
View Related
Feb 5, 2011
I need some help since i installed opensuse 11.2 when i boot my pc, grub doesnt show me windows to boot only opensuse and failsafe this is my details code...
View 4 Replies
View Related
Mar 10, 2010
I virus got my XP installation this morning. I have to install it. When I install windows it will write over the GRUB and I will no longer be able to re-boot my openSusie OS. My question is After XP is installed is there a way to re-install GRUB without having to re-install openSusie 11.2?
View 9 Replies
View Related
Jan 20, 2010
After shutting down linux the first time on suse 11.2 the grub loader won't show me the option to boot windows. I tried using wine and dosemulator to get to windows and it doesn't work because I don't know the file name to open windows.
Their are certain programs that I can only run in windows and I need windows open to install them.
View 7 Replies
View Related
Apr 17, 2010
My Laptop Config is as follows.
Compaq Presario V3700
AMD Turion64
2GB Ram
Windows Partitions
/dev/sda1 == C: (WINDOWS)
/dev/sda2
[Code]...
I have been carrying out updates of both Vista & SuSE whenever i operate in them.
One (Not So) Fine Day, when i Choose from the Grub loader "Microsoft Windows Vista SP2" option it just din't boot into Vista. I have Tried many a time.
My First doubt was towards Vista only, so i choose the "Windows Recovery Mode" option from Grub. It went into the Recovery mode. I ran Memory Tests on Windows Partition, took its own sweet time, whatever missing indexes and all it carried out and finally gave the Thumbs Up result. After that, i carried out Startup Repairs, all came out well. So, Yet again i restarted and tried to get in Vista. Nope, dint work.
View 9 Replies
View Related
May 13, 2010
Recently, I downloaded openSUSE 11.2 DVD.I read here (Partitioning/Install Guide) that GRUB may not dual boot correctly with windows: It should be said that grub does not always get the settings to boot Windows quite correct and you may later have to adjust the /boot/grub/menu.lst file in your Linux installation
Is it true also for the openSuse version (11.2) that I downloaded? Please refer to Windows 7.
View 2 Replies
View Related
Jul 31, 2010
just installed opensuse 11.3 with kde when my last time working with linux was in 2006.
Now I installed from the Live-CD and everything went fine, only problem came after the installation when I noticed GRUB didn't find windows at all.
Now I did fdisk -l and here's the result:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[Code].....
View 5 Replies
View Related
Mar 5, 2011
I have an ASUS A8N-SLI board with an nForce4 raid 1 setup hosting a Windows 7 array over two 500GB disks. I have a third SATA drive with opensuse 11.3 installed and working perfectly. By changing the boot order in the BIOS, I can alternate which system boots at startup. What I want to do is set up a dual boot configuration... I don't care how, but I want a screen that asks me which OS to use, preferably defaulting to Windows so my wife can stil check her email without calling me at work.
I thought the easiest setup would be to set the LINUX drive as the primary device and then add then chainload the Windows disks, and set them first in the boot queue. That way, without any intervention, the system would pause for 8 seconds and see if I wanted to boot LINUX, then boot Windows if I didn't do anything.
The problem is, I can't figure out how to add Windows to the GRUB menu and recognize it. All of the documentation I can find seems to assume that your Windows and LINUX partitions are on the same disk, which mine are not.
View 9 Replies
View Related
Apr 15, 2011
ok basically i have 2 hard disks one Seagate 500GB Sata, and one Western digital SATA my windows 7 is on the western digital and i think thats sda1, and opensuse is on the seagate the grub loader is on the western digital, and earlier today everything booted fine, till i went to boot windows
i had 2 "other" options, i selected the first one and it failed, the second other booted to windows, after about 3 hours on windows and doing nothing. i went to reboot and go to opensuse, and got a "grub loading stage 1.5., please wait" and it loads forever and nothing happens, it just idles im currently on the livecd just to get an operating system to use to get the net
View 9 Replies
View Related
Jun 29, 2010
I installed opensuse 11.2 today on my external hard drive and everything is running great, but I want to see if I can make a modification to the way my computer boots. I share this computer with others and they are not going to be happy to have to wait for the boot menu to start when they turn on the computer in order to choose which OS to run (Especially since if they do not make a choice it auto runs opensuse after a few seconds).
What I would like is if opensuse can be "out of sight, out of mind" and only load when I put in the live cd and then choose to boot from my external...... is it possible to do this?I am not a computer wizard and do not work in the industry.
View 9 Replies
View Related
Mar 21, 2011
This is a problem when Windows is running some malware that cannot be removed, which happens all the time. The problem is all the new hardware or specialized hardware will not work on Linux so Windows is the only choice. I would think the latest versions of Linux would have this problem worked out by now. I installed 11.3 one week ago, only to find that the repair option in the install menu no longer exists so don't bother uses this link to reload the GRUB HowTo Boot into openSUSE when it won't Boot from the Grub Code on the Hard Drive. I also tried this link Re-Install Grub Quickly with Parted Magic which does not work either. On step 2 typing grub returns the error message "grub command not found". You can use GRUB if you boot the install DVD and select Rescue Boot. However when you type find /boot/grub/menu.lst the error message "file not found" is returned.
I did the following to restore my GRUB boot record. Boot the install DVD and select the update option during installation. Change all the repositories to enable except the NVIDIA repository, it is not responding at this time. When the system comes up go into Yast and open the boot loader. It should have your original boot menu in memory. Change the default to another option and re-write the MBR. This will write a new MBR using the original data updated with your new default. Re-boot and then change your default back. I am just a NewBe so this may not be exactly correct but I hope it saves someone like me some time fixing a MBR re-writing by the Windows installer.
View 1 Replies
View Related
Apr 6, 2011
A few days ago my Laptop wouldn't hibernate in Windows 7, I managed to fix this problem by going into Windows' Disk Management tool and setting the C:/ Partition as the active partition, this fixed my hibernation issue, however I have just noticed that now when I boot my laptop my GRUB menu no longer appears, instead it just loads Windows straight away as if it was the only OS on my laptop.
I've confirmed it's something to do with my recent Disk Management change as I booted up GParted, removed the boot flag from Windows and when a rebooted my GRUB menu reappeared.
Not sure on how I can both have Windows as the active partition while being able to keep GRUB working also.
My Partition Setup is as follows:
/dev/sda1 C:/ Windows 7 (NTFS) (Boot Flag Set)
/dev/sda2 D:/ DATA (Documents and stuff) (NTFS)
Unallocated 1 MB
/dev/sda3 Extended 146.49 GB (LBA Flag Set)
/dev/sda5 Linux Swap 2.01 GB
/dev/sda6 ext4 20.00 GB
/dev/sda7 ext4 124.46 GB
Unallocated 10.00 MB
I'm running openSUSE 11.4
View 3 Replies
View Related
Jul 18, 2011
I had opensuse/winxp running.
First windows xp wouldn't boot - then opensuse **** out and I had nothing but a black screen. I spent about two days trying to figure out what in god's name happened. I finally got a copy of winxp recovery disk and it couldn't find the partition that windows was on. That gave me some idea of what was going on. So I tried to fix the matter from partitionmagic. I reinstalled grub making sure that everything was associated properly. I still couldn't get either opensuse or windows to boot after many many different trial and error attempts.
After deciding there was no help for it. I decided to slave my hard drive and wipe to start over. So I booted partition magic from USB and deleted my opensuse partition and -what do you know - windows booted right up. Aside from feeling windows xp's smug grin as the logo appeared - i am perplexed as to how this happened. My guess is that MBR tried to overwrite grub. But I think that the loader was confused and trying to boot from the wrong partition.
I want to reinstall opensuse again. However I want to make sure that this doesn't happen. I need my xp partition for examsoft because wine doesn't seem to work for it and I can't vbox it. So is there some way to make sure that when I do install from DVD on my USB that:
1) repositories are correct
2) MBR doesn't overwrite grub (should I install Grub2 or LILO?)
View 4 Replies
View Related
Mar 16, 2011
my issue is that i want to boot from windows boot loader neither than booting form grub loader...
I have installated windows and then installated red hat...I am able to login to windows and red hat without any issue but my prob is to load red hat and windows from windows boot loader...
Can u guys tell me where to edit and configure the files.
View 9 Replies
View Related
