OpenSUSE Install :: Can't Restore USB Stick Size After USB Creation "the Hard Way"?
Oct 31, 2010
I created Live USB with OpenSUSE 11.3 using "hard way" method from FAQ, i.e. using dd command. Now I want to delete OpenSUSE from USB stick. I have Kubuntu installed, so I follow the steps described in here, but I can only create 1Gb partition on my stick while it has 2Gb capacity. KDE Partition Manager also only shows 1Gb on the USB stick. What is going wrong?
PS. Similar issue is described in [URL]..But mine is slightly different.
View 5 Replies
ADVERTISEMENT
Feb 20, 2010
I'm getting a netbook with no cd/dvd drive but it boots off of usb, so I've made a slackware 13 usb stick to start the install. I also have a usb hard drive I was going to copy the packages to. I'm wondering... should I boot with the usb install stick and then connect the usb hard drive afterwards?
View 4 Replies
View Related
Mar 5, 2010
I am creating a raid10 for our studio. I just realized after creating the filesystem that I would like modify one of the parameters - the blocksize. My original command:mkfs.ext4 -b 2048 -L insightRAIDvol /dev/md0I know want:mkfs.ext4 -b 4096 -L insightRAIDvol /dev/md0Is it ok to just issue this command even though a filesystem already is in place?I am hesitant to try this without knowing what the ramifications of this might be for the superblocks or some other unknown parameter to me that might cause problems in the future.As well I know I could rebuild everything from scratch but that's a day and a half of rebuilding
View 3 Replies
View Related
Apr 25, 2010
I use the Basic System for Co-operative Work (BSCW) to implement a collaboration environment in Apache. In previous versions of SuSE, I had created a BSCW user and group. The UID and GID that I had used is now assigned to some other system/application.Can someone refresh my memory on how to create a UID and GID in the 100-200 range?
View 3 Replies
View Related
Sep 8, 2011
I installed openSUSE 11.4 on HP elitebook 2560p few days ago (using KDE live CD). In general system is working fine, but steel I cannot resolve couple of really annoying issues: 1. I've created encrypted partitions for swap and home during OS installation. As result the system keep asking for passwords for each of encrypted partitions before show login screen. That leads to situation when I have to type 3 passwords during each boot/reboot. I was using the same configuration (swap and home were encrypted) on Ubuntu 11.04 and there both encrypted partitions were mount automatically with no password typing after login to the system. Could you please tell how I can configure the same behavior on openSUSE 11.4 ?
2. I've enabled auto screen lock after 5 mins being inactive. As result when I going back to laptop and to unlock the screen the system shows login screen (default login screen with user selection). But when user and password filled in I click login it creates entire new KDE session. Therefore all staff that was open before screen lock is gone. However old session is still in the system (it appears in output from 'w' command).
View 6 Replies
View Related
Mar 26, 2010
I am developing for a Linux based device for which the HOT PLUG option is deactivated. As part of optimizing the code, we also don't want to create device files for unused devices. We understand that both USB attached and fixec SCSI hard disks would create device files like /dev/sda,/dev/sda1 /dev/sdb, /dev/sdb1 etc. Is this understanding correct?
In the case of USB attached SCSI devices, would driver create this device file entry? How is it created? Can somebody please tell me how it is being created automatically. In case I attach a fixed SCSI hard disk before boot up(and create device file /dev/sda1), would USB SCSI device driver create device files starting from /dev/sdb, automatically.
View 4 Replies
View Related
May 25, 2011
Today, someone who had problems with his usb flash drive showed it to me. I plugged it in my linux box.
Code:
cat /proc/partitions
only showed
Code:
sdb
and no partition name (sdb1, etc.). So I ran fdisk on it I deleted all the partitions (4 in all) and recreated a single partition taking up the whole drive and marked it as c (win32 vfat) I exited fdisk (w) and formatted the new partition
[Code]...
View 5 Replies
View Related
Nov 24, 2010
I have an OCZ Mini-Kart USB stick which says 2GB on it, and it has been a 2GB stick for the last 3 years. However, I recently put it into a PC running XP (which had no viruses as far as I am aware) and all of the files in the single subdirectory became corrupted and unreadable. All files at the root of the USB stick were fine, and I could still boot from it (I had Puppy linux installed).
I looked to see if the corrupted files in the subdirectory were recoverable, but they were all inaccessible, (with freshly mangled file-names containing multiple copies of the characters '�' and '=' amongst others), and reporting file sizes of up to 1.9GB each. I examined the memory stick with fdisk and with Gparted, and saw that it was reporting two 2GB partitions, which was certainly not the case before, as I had recreated the partition table several times in the past.
I removed all partitions, created a new partition table and recreated a single partition, which is now 4GB in size. I have trashed it and recreated it three times, formatting it with ext3, ext2 and finally FAT32, all of which reported a partition size of 4GB. I currently have a 4GB FAT 32 partition, and have tested it by successfully copying a 3GB .iso file to it.
Although it's nice to have a 4GB memory stick, it does seem rather odd and I no longer trust it with my data.
View 8 Replies
View Related
May 18, 2010
I've got a server that needs more space. To achieve this we added space (by extending the VMware disk attached to it).Normally this isn't an issue, because we just add an new partition and LVM it from there, but this host predates our deployment of LVM everywhere.
Our current theory is that the unallocated sectors can not be assigned because they aren't part of the extended partition, and thus ... we go in a circle.So what i believe the way forward is to extend sda4 so that i can then create an sda10 inside of it. Anyone have any ideas on how to do this? I was thinking gparted may do the trick ... but being a server i'm in runlevel3, with no X...
View 5 Replies
View Related
Jan 20, 2010
I am trying open suse for the first time and i want to install it on a usb stick this it is the latest version
View 9 Replies
View Related
Jul 11, 2011
I have done a big big mistake (I could beat myself up for that) with my netbook and now I am sitting here, not getting openSUSE installed on it.
I wanted to try another netbook linux and installed (more by accident than intentionally) Easy Peasy Linux. This system is not bad, but cannot work with the wireless adapter in my netbook. However, I then wanted to install openSUSE 11.4 again, which ran fine on the netbook. But the install always gets stuck in different stages and I don´t know why.
Sometimes a failure message comes up: "filesystem is read only, rebooting in 120 seconds", but I am not really sure if this is for the harddrive or the usb stick. In other occasions, the bootprocess until install gets stuck at "starting KDM". Nothing happens then... thats it.
I already have reformatted the usb stick and copied the openSUSE Live CD via Imagewriter on it again... no success.
So now I am really confused, because I don´t know if there is something wrong with the harddrive? Or is it the stick itself? How can I find this out?
If it is the harddrive, how can I at least refomat it? Remember: no CD or DVD drive, just USB stick...
How can I find out if the image on the stick is ok? I already tested the install media and it said: "checksum ok"
View 9 Replies
View Related
Feb 26, 2010
I added a repo from launchpad to install latest Network Manager and then installed it (version 0.8). Then I decided to rollback to Karmic's version (since 0.8 doesn't work) but failed: I removed the repo from sources.list
Then apt-get udpate
Then apt-get clean
Then apt-get install network-manager...
But still 0.8 version is downloaded and installed! How can I restore Karmic's version?
View 8 Replies
View Related
Jan 31, 2011
I have read lots about KDE (4.xx) freeze on OpenSuse 11.3 Live. Well I have experienced it first hand.
My hard disk which had Opensuse 11.3 (reiserfs) crashed. It was a dual boot and a windows upgrade wiped out the partition information. I am still trying to resuce with dd-rescue.
Now in the meanwhile I burnt a opensuse 11.3 Live CD and worked on it for a week. I was bit annoyed that every too often the cd drive spins....so I decided to burn a usb stick. Its a 2 gb USB stick. I followed the instructions to the toto to burn the ISO image. Then my nightmares started
The USB STICK boot was smooth. However when the desktop starts ...the trouble begins. I clicked on firefox...after about 10 seconds I experienced the dreaded freeze first. I had to reboot the system.
Everything was fine till i started Firefox, the system froze. Now reboot -> start -> firefox --> freeze cycle continued. I got fed up.
I then downloaded google-chrome. Installed it (after updating a couple of drivers) . It worked flawless. I loaded it with graphics...still no problem. Then started firefox .. the system froze. I even disabled all KDE windows animation, set only one window pane, still there is a freeze.
I took my USB stick off and rebooted the system though live CD. I started firefox on boot, NO problems. Opened many many tabs. Still no problem.
So there is a SURE problem with USB + Firefox. I SUSPECT IT MORE DUE TO NETWORK ISSUES THAN GUI (DRIVER) ISSUE. If it were to be GUI driver issue firefox should have fozen both with CD and USB.
Mine is pentium duo processor machine with 2gb RAM (DDR2). Intel chipset for video. I checked the MD5 of downloaded ISO its matched the one on the site. So the iso image is flawless.
All the threads in this regard suspect the video drivers, but I ALSO suspect the network. May be there is a wait() state in the network driver that is holding the process for way too long causing the freeze. Somebody needs to check this up.
The freeze is on USB stick boot only and not on CD boot.
View 9 Replies
View Related
Apr 30, 2011
I'm currently having troubles upgrading my 11.1 system. My SuSE running 11.3 had crashed, and when I tried to reinstall it I couldn't find the cd. I only have a 11.1 distro cd, in which I had installed. I want to upgrade to 11.2 since that should be the easiest, from then I think i can figure out how to upgrade from 11.4. I currently do not have any cd's or a usb flash drive to mount the iso image onto. I've read through the wiki looking for a solution, but even with updating my repos i still haven't found the answer.
how to upgrade from 11.1 to 11.2 without a cd or usb stick.
View 1 Replies
View Related
Nov 17, 2010
I've been running 10.04 since September on my new MSi i3 notebook and about two weeks ago I noticed that when I login after system boot, propagation of icons on my desktop and the content of my Panel have become slower and slower.If I logout and login again the propagations are not slow.
View 1 Replies
View Related
Feb 8, 2010
I've followed the instructions at Live USB stick - openSUSE for creating a bootable USB stick. I have attempted this with both a 32 bit and 64 bit image. Unfortunately my system will not boot up the stick - it just loads my hard disk as normal.
Background info
1. I have checked the iso images against the checksum and they are ok;
2. I have used the same images to create bootable CDs which work fine;
3. My machine IS capable of booting a USB stick - by copying syslinux onto the stick, the machine does see the stick
4. The order of boot in BIOS is stick first. Again, I have proven this works ok using a utility called USB Boot Tester.
I am unsure what to try next. I recall reading on this forum there was a problem booting from USB stick if the computer also had a CD drive. That was in an early version of LiveCD. Could the problem still be extant? I can't find the actual thread unfortunately otherwise I would link to it.
View 8 Replies
View Related
Apr 1, 2010
I created a live USB stick following the instructions at [URL] installing openSUSE-11.2-KDE4-LiveCD-x86_64-iso and booting a Motion LE1700. openSUSE works great but any file I create is lost after I reboot. I created the second partition with the script listed the instructions. Is there any anything else to do to make the live system mount the second partition?
View 5 Replies
View Related
May 10, 2010
Downloaded openSUSE-11.2-DVD-x86_64.iso Burned on a DVD and used to make an install op a Dell laptop Everything went okay. Now I like to make a install on a ASUS UL20A laptop without an optical drive Placed the iso on a USB stick with dd command The stick can be read by openSUSE 11.2 machine NOT by WIN 7 machine I tried to make the USB stick with Win32DiskImager.exe
View 9 Replies
View Related
Sep 17, 2010
Could someone recommend a simple (non-graphical) distribution that fits on a USB stick, boots without HD access, providing the functions of Super Grub Disk. I find the instructions for creating a Super Grub USB confusing. Even the CD version has cryptic operating instructions. Yes I know there is always Knoppix, but it is graphical (slow loading) and lacks the grub manipulating functions.
View 9 Replies
View Related
Oct 3, 2010
I downloaded openSUSE 11.3 to my MacBookPro, whose disk drive has been broken for some time now. I want to install to new msi cr610 laptop that shipped WITHOUT windows. I could order the box with an install disk and printed manual, but if there's any way of creating a bootable USB stick from the download I did to my mac, that would be great.
View 3 Replies
View Related
Oct 8, 2010
I have no clue why KDE is doing this, but whenever I reboot the system, the resolution resets to 1024x768. I really need to stop it from doing this. Also, Sax2 doesn't seem to be working and there is no xorg.conf file that I can see of.
View 4 Replies
View Related
Nov 21, 2010
Completely erased my windows finally to load up opensuse 11.3. It's amazing!!Only one problem. I can use a usb stick and it automatically shows up. When I plug in my microSD into my usb adapter I get an error message. 've seen lots of posts about this error message but everything I've read has been way over my head.
View 4 Replies
View Related
Dec 15, 2010
I need some help to set up a bootable USB stick. I have an USB stick, 3.7 gigs big, on which I want to put the OpenSuse Live CD iso, but somehow I am stuck... I have formatted the stick and I have set the boot flag in KDE partitionmanager. Then I have put the .iso on it, using Unetbootin. When I now try to boot it, I get the message
Code:
could not find Kernel boot image: gfxboot
Is maybe the boot flag not set, despite the partitionmanager shows it set? Can I set it also afterwards, after I have installed the .iso on the stick (I tried this already, did not change anything)? Or is there something wrong with the .iso?
View 2 Replies
View Related
Jan 26, 2011
I want to install 11.3 on a usb flash stick on a netbook.the internal harddisk should be completely unaffected, meaning
- when the usb stick is plugged in, bios should boot 11.3 from the stick
- when the stick is not plugged in, bios should boot from the internal hard disk
I am unsure how the boot options in yast have to be set to achieve that.I changed the order of the harddisks to /dev/sdb (=the usb stick) being the first.I selected /dev/sdb3 (The root partition of the to-be-installed 11.3) as user defined root partition.do I have to select "start from MBR" and/or "start from root partition"? is there more to do to make the usb stick bootable?
View 9 Replies
View Related
Jan 26, 2011
-I could use a hand in installing opensuse on my 2009 Intel Macbook
-I need to use a USB stick for the install, my optical drive doesn't work.
-I am trying to reformat my macbook to run 64-bit opensuse 11.3 instead of Apple's proprietary operating system, OS X
-So I started here: Chapter1.Installation with YaST
-And in this article, under section 1.1. Choosing the Installation Media, i found this sub-section: Booting the LiveCD from an USB Stick.
-So i followed those steps to create a bootable USB stick in Terminal, and i got an error in Terminal and was unable to go any further;
-this was the error in Terminal: dd: bs: illegal numeric value
Would anyone know what the error means, and what i should have typed instead? Is it because my USB stick is generic instead of being a specific type like a U3 stick?
View 9 Replies
View Related
Aug 28, 2011
How do I make an openSUSE 11.4 DVD USB stick on Ubuntu? I downloaded the DVD 32 bit version. I'm not even sure this post is supposed to be on the Install/Boot/Login forum.
View 9 Replies
View Related
Jun 1, 2010
I am using the Gnome desktop in Lenny 5.03The default Gedit paper size is "US Letter", which is almost right for my HP Laserjet 4L, except that about .5 inch at the top and .25 inch at the left margin are cut off.I have defined a "Custom Size" under File -> Page Setup -> Manage Custom Sizes... with margin settings that solve the problem, but this "Custom Size" only remains the default Paper Size for printing until Gedit is closed.Using what appears to be the same gnome dialog from epiphany and evolution, the Papersize settings stick, but not from Gedit. I cannot locate any configuration file to edit, and nothing in the gconf editor seems to apply.
View 4 Replies
View Related
Feb 7, 2010
I am getting a "No devices matches MBR identifier 0x8c71ad6e!" message along with a reboot in 120 seconds message. This occurs after kernel load and at the start of openSUSE boot.
I have tried both the 64bit and 32bit downloads
openSUSE-11.2-KDE4-LiveCD-i686.iso
openSUSE-11.2-KDE4-LiveCD-x86_64.iso
I have checksum checked both images after download. I have attempted the install on CD and USB stick with both images and the result is always the same.
I've included a screen image on my site: No Devices Matches MBR Identifier | Badzilla
View 5 Replies
View Related
Feb 10, 2010
i need to install openSUSE 11.2 from an USB stick. I followed this article SuSE install from USB drive - openSUSE using the openSUSE-11.2-NET-i586.iso. Unfortunately the kernel provided in this image doesn't load on my target as it needs a few extra modules for its chipset.
Thus i copied our custom kernel (which is verified to run on the target) and its initrd to the usb stick and i also created a new entry in the syslinux.config. The kernel loads, but then it can't find the root device.Does anybody know, how i need to configure the initrd to make the USB stick the root device?
View 2 Replies
View Related
Feb 11, 2010
I'm new here, an Ubuntu user who would try Opensuse for a while. That is if I'm able to launch the thing !
I'd like to create a Live Usb Stick to test it and install it if I like it but it doesn't seem to work.
I tried the website method, using "Win32DiskImager.exe" but the program doesn't work for me (WinXP) : it looks like it's writing but when the "Done" message is prompted, I'm unable to access the usb key, Windows says it's not formatted. That doesn't look right...
I tried with LinuxLive Usb Creator but the boot process fails and Universal-Usb-Installer doesn't offer an Opensuse option.
Is there another way to install the distribution on an USB stick ? I could still try through Ubuntu but that would be quite surrealistic.
View 5 Replies
View Related
