OpenSUSE Install :: Dual Boot After This Point The Reboot Operation Has Failed And Gave A Blank Screen?
Jun 19, 2010
i am trying to install opensuse 11.2 to my vaio laptop i have win7 pro 64 bit already installed so i'm trying dual booting i have followed the below steps1- on windows, shrink the c partition and create a new unused volume for suse2- install the suse 11.2 on the new unused volume with hdd config like sda4 swap 4 gb sda5 20 gb / ext4 sda6 120 gb ext43- selected custom packages and started the installaton4- installation started smoothly and after installing packages it tried to reboot the machine at the end. But after this point the reboot operation has failed and gave a blank screen.
At the end the installation failed.I started the machine vaio boot logo comes and stops. i can't even enterbios setup or change boot options.I have unplaged the hd reset the partions, pluged it again and recovered win7So i think the installation damaged the file system.i have tried the above steps 2 times and came up with the same result.I have installed fedora 13 before with no problem.
View 9 Replies
ADVERTISEMENT
Apr 14, 2011
I Just installed OpenSuse 11.4-32 bit with KDE 4.6 on my PC. At first boot everything was working, then I added the community ATI/AMD repository to get the drivers for my ATI 5570, but after reboot i got a blank screen. So I ran the "failsafe mode" in the boot menu, it worked (3D accel. as well), but just for the root user. To make it work for the non-root user had to set the setuid bit for /usr/bin/Xorg. (is it ok to run xorg with superuser privileges?) Then I tryed to understand wich is the kernel option actually needed for X to start, and after a few attempts I realized the only option really needed is the "nomodeset". what is the nomodeset option for? and why I need it to run in the graphic mode?
View 9 Replies
View Related
Nov 13, 2010
A surprising thing has happened! I have been happily using open suse 11.3 on an HP probook 4320s laptop. On reboot this morning, the screen starts out fine, but progressively fades into white and the boot does not seem to happen (at least there is no sound, since I cannot see anything). I am left with a completely white screen. Things are fine with the failsafe mode.
View 9 Replies
View Related
Dec 27, 2010
I've been googling and couldn't find solution to my problem. In the past I was able to get around dual boot with Win XP but that Win 7 seems to be more resistant to dual boot. I have a Toshiba Portege T110 that came with Win 7 home edition. I parted the hdd using gparted and put Linux on extended partition. It was OK up till then. After installing Opensuse 11.3 and installing Grub in extended partition, grub came up but when I chose windows, I got error from windows boot manager saying it couldn't find winload.exe. I tried to manipulate the grub by typing:
rootnoverify (hd0,1)
makeactive
chainloader +1
boot
That didn't work at all. So I reinstalled Win 7. After Win 7 back up, I again tried to fix grub by doing this:
find /boot/grub/menu.lst (this gives hd0,5)
root (hd0,5)
setup(hd0)
quit
After rebooting, grub came back but when I tried to access win 7, I again got the black screen saying my winload.exe is missing. I'm reinstalling my win 7 for the 2nd time now. But I'd still like to get the dual boot with Opensuse 11.3 to work. What have I done wrong? Should I put grub in MBR or the mount point / ? or should it be left alone in extended partition? And how do I move grub to different place?
View 9 Replies
View Related
Feb 4, 2010
i wonder if any one can help me, i have just installed 9.10 on my Dell Optiplex P4 2.0GHz 512MB RAM 200 g hd.install went well up till i eject cd at the end,when it try to reboot all i get is a blank screen ?
View 2 Replies
View Related
Mar 28, 2010
Since 11.2 installed but shows blank screen at boot despite booting into runlevel 3 with acpi=off and noapic, I decided to try 11.3 M4 again.Media check is OK for 11.3 M4.Boot from MBR. GRUB menu shows Ubuntu and Windows 7 as well as openSUSE 11.3 desktop default and 11.3 failsafe. Both opensuse11.3 default and 11.3 failsafe return a blank screen despite the following boot options:
33 acpi=off noacpiI still cannot get to a terminal to run sax2. I read from a thread of opensuseforums (Opensuse 11.2 Blank Screen) where similar problem was solved using the correct driver which is actually "ati", NOT "radeon" for ATI Technologies Radeon Xpress 200M.Then because both Windows and Ubuntu boot fine from GRUB menu, it occurs to me I should boot up Ubuntu and try to locate openSUSE's /etc/X11/xorg.conf in order to edit the file and change the driver to "ati".In Ubuntu, xorg.conf of opensuse 11.3 M4 shows:
Section "Device"
Identifier "Configured Video Device"
EndSection
[code]...
View 6 Replies
View Related
Apr 18, 2010
I have tried two distros - Mandriva and OpenSuse. Both provide the same results, though Mandriva booted...but still the same problem, after installing blank screen comes up and nothing. Keyboard touch bad, mouse nothing happens. I would prefer openSuse but may have to switch.
Equipment:
Acer 7740 17" laptop
Intel i3-330M Chipset
4Gig DDR3 RAM 1066
Intel Integrated HD Video 128MB
Install Win7 64-Bit no issues, wiped and installed Linux and I cannot get past this blank screen. Installation works, no problem installed packages etc. When coming up on 1st boot, login - boom nothing? Searching the web and I suspect the Intel graphics are the problem but I'm not sure.
I bought this laptop to put Linux on it solely for a personal project of using Linux for a year. I'm an IT professional for 23 years and comfortable with CLI.
View 9 Replies
View Related
Aug 1, 2010
I installed 11.3 as a new install over 10.3, kept the $home and windows partitions, and let it reformat the other two partitions. NO disk partitioning structure was changed.
I did get a warning that GRUB over 128GB might not be able to boot.
I did enable the MBR.
GRUB menu does come up, but upon selection of SUSE 11.3 entry the computer screen blanks, and nothing happens. Selecting Windows does work upon power-up.
I did not have this 128GB issue with 10.3. What are my options? I am really afraid to install 11.3 on production machines now (running 11.2).
View 3 Replies
View Related
Jul 1, 2010
I have been trying to install openSUSE on a dell Latitude XT all day, and every time I tried to live boot, I got a blank screen. I finally decided to do a text install and I got it installed, but now I get the same result from booting off of the splash screen.
I can boot into text mode fine (still) but for whatever reason, it bombs as soon as I tell it to load the GUI. I have a 1.2 GHz Core 2 Duo, 3GB RAM, and an ATI mobility chip (2000 series, maybe?) I had the same problem with Ubuntu, and since I like openSUSE just as well, I figured I'd try it because I at least could do a text install from my liveCD.
View 2 Replies
View Related
Nov 4, 2010
For some reason, sometimes after I just turn the computer off by pressing the power button while hooked up to the video mount, I'll turn the computer on and (after it automatically logs into the standard user) come to a blank black screen. The only thing I can access is by pressing Alt+Tab to get a "no present windows" window, and thats it. Could it be that an activity or something has been deleted somehow?
View 1 Replies
View Related
Nov 18, 2010
I have always had Ubuntu installed along with Win 7 but rarely use it, i only use it if i am flashing firmware to my phone or something similar.
I uninstalled my older version of Ubuntu because it was becoming sluggish and have tried to install the 10.10 version a few times today, but every time i boot into Ubuntu, i get a blank purple screen and nothing else.
My mouse curser is the only thing that is working but there is nothing to click on and nothing shows if i right click.
View 4 Replies
View Related
Jan 14, 2010
I had ubuntu running just fine on another computer, but had to move things around to make Windows7 run better. So after backing up Home, I switched hard drives, pulled the video card, and adjusted RAM, I tried booting up. The computer found all the changes and did its thing. But then it hung with a blank screen. I figured that it didn't recongnize the video driver for this computer, or something, so I did a fresh install with 9.10 to start over from scratch. The boot up went great, and finished completely. I made a few changes to the desktop, and loaded in my archived firefox bookmarks and evolution files. After rebooting, the first ubuntu logo came up, but then the blank screen, with no drum sounds. I tried a few more times rebooting and hitting esc, but I don't know what I am doing at that menu. I also tried the F1 option, but again, I don't know anything. One other time I was able to boot into ubuntu all the way when I was hitting esc slowing (waiting) and somehow was able to get the login and the desktop just fine. I haven't been able to get that to happen again.
Can someone walk me through the steps to troubleshoot this? I don't know any terminal jargon or commands, and haven't really got a clue, but I really want to learn and figure this out. I don't even know how to go in from the command line to see what my system specs or video specs are to tell you.
View 1 Replies
View Related
Oct 12, 2010
I've been trying to install 5.5 here for the past few days, first from USB and now from the CDs, with no success. The problem occurs when I reboot after installing. After the BIOS has done it's thing I'm faced with a blank screen with a blinking cursor at the top left of the screen.
Initially I assumed that this was due to the intel driver problem which is reported in the release notes as a known issue, and the PC I'm installing on has intel graphics. However I have now done a text install and still have the same issue. I'm able to boot up the system using the CentOS live CD, which encounters no issues, and it mounts the local system no problem. After unmounting and remounting to get write access I'm able to change the device entry in /etc/X11/xorg.conf to have the Option "DDC" "false" entry. I can also see that the runlevel is set to 3 in /etc/inittab, still I get the blank screen on attempting to boot.
Any ideas on what might be wrong here? It really sounds like the intel driver problem people have described, and yet I can't even boot in text mode so that doesn't seem to be the case here. Could there be something wrong with the bootloader?
View 2 Replies
View Related
May 8, 2010
I've had Windows XP Home installed on my netbook (Toshiba NB205) and I've just tried to install squeeze via net install. In particular, I installed grub. Everything seemed to go ok during the installation, but when I boot up, all that appears is a blank screen with nothing but at "j" and a cursor. One thing I can think of that might offer a clue, is that when asked to installed grub, the installer said it recognized two operating systems: Microsoft Windows XP Home, and Windows NT/XP. The latter is not really an operating system, but the backup partition.
I don't know how this might affect grub's functioning. What does this "j" mean? Looking at this: [URL]. Could this have some thing to do with boot flag? Should I switch it to my NTFS partition instead of my root partition? Doing that at least let's me boot into Windows. But that's not what I want. I've never dual booted before. So I booted back up with my USB, intending to reinstall Debian, and it loaded grub instead. So apparently grub is now on my USB. Then it booted me into Debian.
View 3 Replies
View Related
Sep 19, 2010
I have just upgraded my FC12 installation to FC13. The initial boot failed (just blank screen). Second time I received 'selinux targeted policy relabel is required'. I let that run, but still the boot did not suceed.
I then went in to verbose boot and saw that the boot would hang at libvirtd. So I disabled libvirtd for anything above run level 1. Next boot failed at atd, disabled atd. Next boot failed at 'monthly Smolt checkin'.
At that point and booted in to single user mode and dissabled SELinux, thinking that was the cause of all the problems. That did not help.
The update process has also removed my previous kernels, so I can't test a different kernel
View 5 Replies
View Related
Jul 8, 2011
I have installed Ubuntu 11.04 along side windows 7 ultimate. But the problem is as soon as I switch on my computer. There is only a blank screen with my TFT screen displaying a msg "Out of Range"
Then suddenly Ubuntu loads without showing any option to load windows 7.
View 2 Replies
View Related
Mar 1, 2010
I'm using opensuse 11.2 and a week or so ago it suddenly stopped shutting down the computer, or rebooting. It shuts the screen down and that seems to be it, so I have ti switch it off. However a day or so later it began to reboot when asked, but still won't shut down. I'm dual booting it with Unbuntu 9.04 using grub2, but it's been that way for many months without problems.
View 9 Replies
View Related
Nov 2, 2010
I installed Win7 after Ubuntu (10.10). I attempted to reload grub so that I would be able to run them dual boot and now I can't load anything.
I followed the guide here: [url] and went threw it a couple of times now to make sure it wasn't user error.
I am using a live cd from 10.04 because it's the only one I have. Any chance that's why it isn't working properly? I wouldn't think so, but I assume that it's possible.
If that is the case; Any way to solve it without using the live cd? I cannot burn a new disk because I have to boot from disk to use my computer right now.
I just get a flashing cursor on a blank screen when I try to load.
View 9 Replies
View Related
Jun 25, 2010
I was a window vista user. I wanted to install suse into my laptop so i shirk a free partition (around 70-80GB free partition) to install suse.After I had installed suse, I found out that I fail to boot my window vista operation system. It had gave me several choices...
1 : suse....
2 : suse....
3 : window 1...
[code]...
View 7 Replies
View Related
Mar 19, 2011
i just installed opensuse yesterday and it's very nice. i wanted to install the driver for my ati mobility radeon hd 5470, so i followed the steps on:SDB:ATI drivers - openSUSEunfortunately, after the reboot, opensuse had booted but there was nothing on my screen (basically, just a blank screen)
View 7 Replies
View Related
May 4, 2010
I installed a new graphic card from ATI 5770 (Club3D). After I did it I removed the propriatery ATI drivers I had installed thru the "Hardware Drivers" in Ubuntu and rebooted. Then I couldn't get into ubuntu again. When it starts booting the display just shuts down and says "Power Saving mode". The computer continues to load things etc. left it running and hoped it would show itself... nothing.
Anyway this happens everytime even with Live CD so I can't even get to a terminal... Started the boot without the splash and it went blank after it started some Speech thing. Just before that there were a few firmware files missing.
View 8 Replies
View Related
Apr 11, 2010
I've been trying out linux distros to see which I want to progress further with. I have a bunch of removable HDDs. I put a single distro on each HDD. I just installed CentOS 5.4 on a machine that has had successful installations of Debian 5.0.3, Fedora 12, and OpenSuse 11.2 installed on it. I still have those HDDs and they still boot and run fine.
CentOS 5.4 installed in graphical mode just fine. I even noticed that it appeared to probe my video card (ATI Radeon 9250 AGP) just fine. I removed the media and rebooted and the CentOS graphics came up fine, and it asked me a few questions such as could I hear the sound. Everything went fine when it said it was now booting to CentOS for the first time, and the screen went blank. The monitor LED stayed green, however, so it looks to me like the monitor still sees a signal.
I'm guessing I need to boot into text mode and fiddle with the display settings, but I'm pretty much lost there.
I did a lspci under Fedora and it lists the following for video:
let me log out of my dang XP machine, and cut and paste the entire stuff straight from the machine I installed CentOS on which is now running Fedora 12.
View 3 Replies
View Related
Jan 26, 2009
I was able to get Fedora 10 to run on VirtualBox. Since the system wouldn't let me set the resolution to anything bigger than 800 x 600, I decided to get the nVidia driver (I'm running the nVidia 8400m G). I did it through this guy's tutorial: [URL]... After rebooting, I see the loading bars and everything, but I get a blank screen with a cursor. After pressing ctrl+alt+F3, I was able to log in to the root and execute the "akmod builds the required kmod on bootup" under the "For GeForce 8 series" [URL]... After a reboot, I still get the same thing. Will I have to reinstall Fedora 10 and just not update the nVidia graphics drivers? I have a 20" monitor that has a resolution of 1600 x 1050 and I would really like to take advantage of that.
View 14 Replies
View Related
Feb 11, 2011
I tried to upgrade Fedora 13 to Fedora 14 using preupgrade. The upgrade seem to go OK, I didn't see any errors. But when it did the final reboot all I get is a blank screen. I rebooted in single user mode and saw that /etc/rc5.d/S99local -> ../rc.local is the last script executed. I edited rc.local and added 'echo "got here"' at the end and rebooted. It did print "got here" so I know all scripts were executed for init 5, it didn't get hung anywhere along the bootup. Why I'm not getting the login screen?
View 1 Replies
View Related
Nov 19, 2010
I just recently got a Dell Inspiron 1525 laptop and have installed Debian on it. When I installed it, I did not install the 'Graphical desktop' packages...only the 'Standard system utilities'Everything has been fine, however when I installed Xorg (aptitude install xorg) and restarted my computer, my screen goes blank at bootup. I can see the grub menu, as well as the beginning bootup process, up until udev begins to load. I have a feeling it has something to do with KMS now being loaded but am not sure.
View 7 Replies
View Related
Oct 10, 2010
I am able to get fglrx driver to work with 10.10, but as soon as I change my displays settings to have my good old dual screen setup, I get a blank screen when I reboot the system.
View 9 Replies
View Related
Jan 9, 2010
So I currently have an install of Karmic running that has been upgraded over the years but I am repartitioning my drives so I did a fresh install on a new drive.
My first problem was the live cd would not boot and I had to use the alternate cd to do the install. It would boot into a blank screen and the i915.modeset=0 kernel parameter did not help.
After the installation finished I went to try and boot and found that right when it went to initialize the graphics, my computer locked up hard. Keyboard unresponsive and all. I read the forums and I tried using the kernel parameter i915.modeset=0 and removed quiet and splash from the kernel line to see if I could spot any errors but nothing appeared.
I am able to boot into recovery mode, and I tried even running an apt-get upgrade to get all my packages up to date and installed the latest nvidia driver but still have this issue.
I'm at a loss as to what I should attempt next.
Here is boot info, just to clarify sda and sdb are a fakeraid on my old setup, sdc is my new install
Boot Info Summary:
View 1 Replies
View Related
Dec 4, 2010
I just tried to install Ubuntu 10.04 on my windows machine. Unfortunately there was an installation error and now the computer will not boot up in windows anymore (I get grub error 17). I had Ubuntu 7.04 before, but when installing 10.04, I deleted the 7.04 partitions. Is there a way to recover the ability to boot into windows?
View 1 Replies
View Related
Apr 15, 2010
So I Installed OpenSUSE A Plethora Of Times. In Both 32 & 64 bit. But No Matter What After It Boots Up And Where I Should See Some Kind Of User Interface The Screen Is Blank. Now this Is The Point Where You restart The Computer And See Where You Went Wrong But Come to find Out My Power And restart Buttons Dont Respond So i Have To Pull the Battery Out Of My Laptop.
View 4 Replies
View Related
May 7, 2010
After struggling to install openSUSE 11.2 on my computer with ATI radoen graphics, I finally managed. Rebooting just after initial installation caused my laptop to give me a blank screen, no command prompt, nothing. With some help from the only post with such a problem on Ubuntu website and after first installation, I did the following:
1. Boot from Live cd of opensuse 11.2
2. Mount the partition which has root.
3. check for and delete Xorg
[code]...
View 4 Replies
View Related
