I am able to get fglrx driver to work with 10.10, but as soon as I change my displays settings to have my good old dual screen setup, I get a blank screen when I reboot the system.
View 9 RepliesI was able to get Fedora 10 to run on VirtualBox. Since the system wouldn't let me set the resolution to anything bigger than 800 x 600, I decided to get the nVidia driver (I'm running the nVidia 8400m G). I did it through this guy's tutorial: [URL]... After rebooting, I see the loading bars and everything, but I get a blank screen with a cursor. After pressing ctrl+alt+F3, I was able to log in to the root and execute the "akmod builds the required kmod on bootup" under the "For GeForce 8 series" [URL]... After a reboot, I still get the same thing. Will I have to reinstall Fedora 10 and just not update the nVidia graphics drivers? I have a 20" monitor that has a resolution of 1600 x 1050 and I would really like to take advantage of that.
View 14 Replies View RelatedI had ubuntu running just fine on another computer, but had to move things around to make Windows7 run better. So after backing up Home, I switched hard drives, pulled the video card, and adjusted RAM, I tried booting up. The computer found all the changes and did its thing. But then it hung with a blank screen. I figured that it didn't recongnize the video driver for this computer, or something, so I did a fresh install with 9.10 to start over from scratch. The boot up went great, and finished completely. I made a few changes to the desktop, and loaded in my archived firefox bookmarks and evolution files. After rebooting, the first ubuntu logo came up, but then the blank screen, with no drum sounds. I tried a few more times rebooting and hitting esc, but I don't know what I am doing at that menu. I also tried the F1 option, but again, I don't know anything. One other time I was able to boot into ubuntu all the way when I was hitting esc slowing (waiting) and somehow was able to get the login and the desktop just fine. I haven't been able to get that to happen again.
Can someone walk me through the steps to troubleshoot this? I don't know any terminal jargon or commands, and haven't really got a clue, but I really want to learn and figure this out. I don't even know how to go in from the command line to see what my system specs or video specs are to tell you.
i wonder if any one can help me, i have just installed 9.10 on my Dell Optiplex P4 2.0GHz 512MB RAM 200 g hd.install went well up till i eject cd at the end,when it try to reboot all i get is a blank screen ?
View 2 Replies View RelatedThe wubi installer copied files successfully and asked for reboot. After booting into Xubuntu the flashing logo appeared for a minute. And then the screen looked as if it was trying to show something but could not and flickered and then became dark this continued till half an hour and then I pressed Alt+Ctrl+Del.I tried all the modes but to no avail, only the last mode with command line was working. But it was not helpful for me becoz I dont know most of the commands.When I tried "Verbose Mode" as directed by the WubiGuide - Ubuntu Wiki, CTRL+ALT+F2 did not work when the installer stopped.The computer I use is assembled with Intel pentium 4, VIA chipset and Mercury(Kobian) motherboard.
View 3 Replies View Relatedi have installed ubuntu 9.10 on my hp nx6325 notebook, and everything was working just fine, then it updated and problem started coming up. First the computer wouldn't reboot after the update, blank screen, then i manually reboted and now some programs don't work (ubuntu software center, update maneger, avant window navigator)
i assume the update did some damage, so how can i repair this, is there a recovery tool or something.
When I mount Debian 8 live into VMWare Player 7.1.2 64bit, it works awesome with and without graphics acceleration enabled i.e I can get into the desktop and all that.
But, when I installed it, the reboot is just a blank screen. I am not sure how I can proceed from now.
I am on Windows 7, 64bit Ultimate.
I Just installed OpenSuse 11.4-32 bit with KDE 4.6 on my PC. At first boot everything was working, then I added the community ATI/AMD repository to get the drivers for my ATI 5570, but after reboot i got a blank screen. So I ran the "failsafe mode" in the boot menu, it worked (3D accel. as well), but just for the root user. To make it work for the non-root user had to set the setuid bit for /usr/bin/Xorg. (is it ok to run xorg with superuser privileges?) Then I tryed to understand wich is the kernel option actually needed for X to start, and after a few attempts I realized the only option really needed is the "nomodeset". what is the nomodeset option for? and why I need it to run in the graphic mode?
View 9 Replies View RelatedI have tried the tips, and to the best of my ability understand the later posts from the sticky post "Graphics Resolution" however I seem to keep reverting back to the blank screen. I did this:
Quote: ATI TIPS: Note that some ATI cards need flgrlx and some do not... If not then this workaround sometimes works: (Found this in another thread / credit to Quote: Originally Posted by surgus View Post
Steps for ATI users:
1. When the boot hangs, press ctrl+alt+f1.
2. Login as user with root privileges.
3. Type "cd /usr/share/ati" and press enter.
4. Type "sudo sh ./fglrx-uninstall.sh" and press enter.
5. Type "sudo reboot".
The above only works for some but not all, depending on what card you have and whether it actually is supported by additional drivers (proprietary). All at the moment, mostl seem to need "nomodeset radeon mode=X", where x= 0 or 1... Some ATI cards are not working with the current natty kernel, but are working with the older 2.6.37 kernel or the proposed 2.6,38.9 kerne (please see post 2)l Sometimes (rarely) it'll work but more often it won't, and in the two times it's worked I haven't known how to get it to remember the setting permanently- keep in mind I have no idea what that last paragraph about x= 0 or 1 means.
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies View RelatedI tried to upgrade Fedora 13 to Fedora 14 using preupgrade. The upgrade seem to go OK, I didn't see any errors. But when it did the final reboot all I get is a blank screen. I rebooted in single user mode and saw that /etc/rc5.d/S99local -> ../rc.local is the last script executed. I edited rc.local and added 'echo "got here"' at the end and rebooted. It did print "got here" so I know all scripts were executed for init 5, it didn't get hung anywhere along the bootup. Why I'm not getting the login screen?
View 1 Replies View RelatedJust curious if there is any sort of issues with Ubuntu and JBOD assignments. I had my 2 500GB hdd's as JBOD through my mobo BIOS/RAID Config and it didn't like it. It installed just fine and showed the hard drives separately. I really didn't think anything of it so I continued on.After the install completed successfully, and I rebooted the system, it came to a blank screen with a blinking cursor and wouldn't continue on. So I tried restarting a few times, no luck. Finally I was like "okay screw this, going to install with no RAID setup or JBOD setup." (had RAID issues last night. rabble rabble) Removed RAID configurations and BAM started right up..S. Semi-new to Linux/Ubuntu. Know the basics and what not, just not some of the more advanced stuff.Edit: Okay, so I restarted my computer and removed my USB drive (which I had installed Ubuntu from) and it didn't boot. So it was NOT an issue with JBOD. Guess I'll look for a resolution for that, though.
View 2 Replies View RelatedThis is probably not possible, but just wondering, restarted centos 5.2 remotely, hung at shutdown, kvm'ed to see what was hanging it up, control c'ed and then ctl alt del, just trying to kill the process, was brought back to the login screen, but unable to type anything. Alt-f1 switched to a different virtual console, which was just a blank screen and a blinking cursor, but now able to type things. Want to avoid hard shutdown. Is there anyway to force shutdown/reboot the machine from this console?
View 1 Replies View RelatedI've been trying to install 5.5 here for the past few days, first from USB and now from the CDs, with no success. The problem occurs when I reboot after installing. After the BIOS has done it's thing I'm faced with a blank screen with a blinking cursor at the top left of the screen.
Initially I assumed that this was due to the intel driver problem which is reported in the release notes as a known issue, and the PC I'm installing on has intel graphics. However I have now done a text install and still have the same issue. I'm able to boot up the system using the CentOS live CD, which encounters no issues, and it mounts the local system no problem. After unmounting and remounting to get write access I'm able to change the device entry in /etc/X11/xorg.conf to have the Option "DDC" "false" entry. I can also see that the runlevel is set to 3 in /etc/inittab, still I get the blank screen on attempting to boot.
Any ideas on what might be wrong here? It really sounds like the intel driver problem people have described, and yet I can't even boot in text mode so that doesn't seem to be the case here. Could there be something wrong with the bootloader?
I have Fedora12 and it was working fine all through. I Installed Skype yesterday and since it was working, I installed the following using instructions from a blog. These were to install
yum install libXv.i686*
yum install libXScrnSaver.i686*
yum install qt.i686
yum install qt-x11*.i686
yum install libsigc++ libsigc++.i686 qt.i686 qt
Skype started to work well. However, after I rebooted the system, all I get is a blank screen with a blinking cursor. I am able ot get to tty by doing ctrl+alt+f2 but am not sure how to proceed from the above. I also erased the above packages thinking that that might solve. But it hasnot solved the issue.
i am trying to install opensuse 11.2 to my vaio laptop i have win7 pro 64 bit already installed so i'm trying dual booting i have followed the below steps1- on windows, shrink the c partition and create a new unused volume for suse2- install the suse 11.2 on the new unused volume with hdd config like sda4 swap 4 gb sda5 20 gb / ext4 sda6 120 gb ext43- selected custom packages and started the installaton4- installation started smoothly and after installing packages it tried to reboot the machine at the end. But after this point the reboot operation has failed and gave a blank screen.
At the end the installation failed.I started the machine vaio boot logo comes and stops. i can't even enterbios setup or change boot options.I have unplaged the hd reset the partions, pluged it again and recovered win7So i think the installation damaged the file system.i have tried the above steps 2 times and came up with the same result.I have installed fedora 13 before with no problem.
i have just put a Geforce 7300 GT graphic card into my machine the problem is the max resolution I can get is 1024x768 at 60 hz the screen is a benq fp71g+. also the screen goes blank when i click on the display icon in system settings. i know that the screen can be run at 1280x1024 so I don?t know where the problem is.
View 3 Replies View RelatedI pressed crtl + alt + f9 on my system and it went to a blank screen. I tried to get it to go back but it wouldn't so I rebooted. Now no matter which kernel I select from the GRUB, even in recovery mode I get the same blank screen and after a few minutes it says
Code:
I tried to use the "Rescue a broken system" option on my live cd but as far as I can tell its just a text installer and I can't fix this problem with it.
Is there a known problem with the Lubuntu 10.10 image here? I have downloaded it to two different computers, then burned the images to two different blank CD's (different brands) and neither loads. Both only get as far as the Lubuntu menu, once ENTER is pressed at that point to load the LiveCD, a blank screen eventually appears with a flashing cursor at the upper left of the screen, that's it. They were both burned using the slowest burn speeds available.
View 9 Replies View Relatedi had to reinstall suse coz i mounted my partition to /usr instead of /home. And now i installed some drivers for nvidia gt 320M and restarted the system but it goes blank after the splash screen. how do i get back to the default settings i had? i have a builtin camera in my Acer ASPIRE 4741G laptop. I installed amsn but it only shows a blank screen if i try my webcam.
View 2 Replies View RelatedI have been running 10.04 quite successfully, when I upgraded to 10.10, I have a problem with the newer kernels. If I let it boot into the latest one 2.6.35-23, I get the Ubuntu 10.10 splash screen for a second then a blank screen, same with 2.6.35-22. I have to run with 32-25 to get it to load the gui.
I have an AMD Sempron 2800, 1.6GHz pc, but I'm not sure if it's running 64bit.
I've been running Ubuntu 10.10 very smoothly for a while now. Decided to upgrade to 11.04 - managed to corrupt the hard disk the first time by letting the laptop hibernate part of the way through but reinstalled from a live CD of 11.04 and it's now working except for this issue.
If I shut the screen on my laptop (or press the screen off button) either the screen won't come back on or it will but frozen (I can move the mouse but not click on anything etc.) In this state music continues to play (from spotify under wine) and if I press my hibernate shortcut (power button) the computer hibernates, only to wake into the same situation. I've got a Dell Latitude D520, upgraded to a bigger hard disk and more ram - the ubuntu partition has 50gb. Windows is working fine.
Edit: I noticed a sticky thread which includes something about a blank screen but I think this is a different issue?
When I install Ubuntu 11.04 with Wubi, I get this freeze screen after I reboot and get past the Ubuntu splash screen: url
As you can see, it's a scrambled picture of my Windows desktop. This happens with every other version of Ubuntu also.
I'm running a 64-bit PC and I don't wanna waste another CD or use a USB to install, because I actually progress further in my efforts whenever I use Wubi.
I installed CentOS 5.5 last night using the DVD ISO (from a USB drive thanks to the Universal USB Installer). I selected the Server and Virtualization packages, and finished the install all the way through. At the end, the installer asked me to remove any installation media and reboot the system. After rebooting, the system hangs on a blank screen with a blinking cursor in the top left corner that does not accept text. This is before the GRUB screen appears. For partitioning, I created a 4GB swap partition on sdb and a 16GB ext3 partition on sda, mounted at /, with the remaining free space on sdb mounted at /storage.
Does anyone know why this system is hanging before the GRUB menu?
I installed Win7 after Ubuntu (10.10). I attempted to reload grub so that I would be able to run them dual boot and now I can't load anything.
I followed the guide here: [url] and went threw it a couple of times now to make sure it wasn't user error.
I am using a live cd from 10.04 because it's the only one I have. Any chance that's why it isn't working properly? I wouldn't think so, but I assume that it's possible.
If that is the case; Any way to solve it without using the live cd? I cannot burn a new disk because I have to boot from disk to use my computer right now.
I just get a flashing cursor on a blank screen when I try to load.
I have installed Ubuntu 11.04 along side windows 7 ultimate. But the problem is as soon as I switch on my computer. There is only a blank screen with my TFT screen displaying a msg "Out of Range"
Then suddenly Ubuntu loads without showing any option to load windows 7.
So finally decided to upgrade the desktop (dual-booting with Windows 7 for games) from 9.10 (fresh install awhile ago, never did anything with it) to 10.04 - upgrade went fine, reboot, watch grub go by, and voila. Blank screen.
Things I tried in grub:
add 'xforcevesa'
add 'xforcevesa' & remove 'quiet splash'
add 'nomodeset' & remove 'quiet splash'
add 'nomodeset xforcevesa' & remove 'quiet splash'
[Code]...
I was hoping to test out Windows 7 in a VM, see how far I could get for GPU acceleration there - I'd much rather not run Windows on the bare iron for that machine, but if I can't get this fixed I have no option :-/
I'm installing Koala here on a 250gb Sata drive. I am looking to dual boot with Win7. I've got a 80gb Win7 partition and the rest is unallocated so I can install Ubuntu on to it. If I try to install, I get to the manual partition screen and it's blank. From what I can tell, Ubuntu isn't recognizing my hard drive at all. When I boot into the liveCD and run gparted, it says no devices found. Also when I boot gparted from a cd I get the same thing. BIOS sees the drive fine and the drive boots into Windows fine.
When I run "sudo fdisk -l" I get nothing. I've tried several of the flags including all-generic-ide. Also tried removing dmraid.
I recently got a new laptop and am trying to install Ubuntu 9.10 on it. I have installed it on my two other computers without any problems, but there seems to be a hitch with my new one. So I boot up using the live CD and then am presented with the option to test Ubuntu or install it. If I choose either of these the screen just goes blank. If I go with the first option of testing Ubuntu before installing, I can hear the intro drumbeats but the screen is still blank.
I have searched in some forums and tried some people's advice, like pressing Ctrl+Alt+- or trl+Alt+Backspace to change the resolution and restart X windows, respectivley. But it doesn't seem to work.
I'll list my laptops specs just in case my problem has anything to do with them:
MSi
Windows 7 Home Premium 32 bit
Intel Core i3 M 330 2.13GHz
4GB DDR3 RAM
Intel Graphics Media Accelerator HD
Ok well this is my first post on the ubuntu forums and the problem I have is, hopefully, pretty simple to fix. When I am installing Ubuntu, I go through all of the steps and once it asks where to install and partitioning and all that I tell it to erase the entire windows thing and put in Ubuntu. So I click the Forward button and when it gets to 69% of copying files, the screen goes black. It sounds like its still running the install but I cant be sure. What should I do?
View 1 Replies View Related