Red Hat / Fedora :: Upgrade Seems Okay - Blank Screen After Reboot
Feb 11, 2011
I tried to upgrade Fedora 13 to Fedora 14 using preupgrade. The upgrade seem to go OK, I didn't see any errors. But when it did the final reboot all I get is a blank screen. I rebooted in single user mode and saw that /etc/rc5.d/S99local -> ../rc.local is the last script executed. I edited rc.local and added 'echo "got here"' at the end and rebooted. It did print "got here" so I know all scripts were executed for init 5, it didn't get hung anywhere along the bootup. Why I'm not getting the login screen?
View 1 Replies
ADVERTISEMENT
Jun 11, 2011
I have tried the tips, and to the best of my ability understand the later posts from the sticky post "Graphics Resolution" however I seem to keep reverting back to the blank screen. I did this:
Quote: ATI TIPS: Note that some ATI cards need flgrlx and some do not... If not then this workaround sometimes works: (Found this in another thread / credit to Quote: Originally Posted by surgus View Post
Steps for ATI users:
1. When the boot hangs, press ctrl+alt+f1.
2. Login as user with root privileges.
3. Type "cd /usr/share/ati" and press enter.
4. Type "sudo sh ./fglrx-uninstall.sh" and press enter.
5. Type "sudo reboot".
The above only works for some but not all, depending on what card you have and whether it actually is supported by additional drivers (proprietary). All at the moment, mostl seem to need "nomodeset radeon mode=X", where x= 0 or 1... Some ATI cards are not working with the current natty kernel, but are working with the older 2.6.37 kernel or the proposed 2.6,38.9 kerne (please see post 2)l Sometimes (rarely) it'll work but more often it won't, and in the two times it's worked I haven't known how to get it to remember the setting permanently- keep in mind I have no idea what that last paragraph about x= 0 or 1 means.
View 1 Replies
View Related
Jan 26, 2009
I was able to get Fedora 10 to run on VirtualBox. Since the system wouldn't let me set the resolution to anything bigger than 800 x 600, I decided to get the nVidia driver (I'm running the nVidia 8400m G). I did it through this guy's tutorial: [URL]... After rebooting, I see the loading bars and everything, but I get a blank screen with a cursor. After pressing ctrl+alt+F3, I was able to log in to the root and execute the "akmod builds the required kmod on bootup" under the "For GeForce 8 series" [URL]... After a reboot, I still get the same thing. Will I have to reinstall Fedora 10 and just not update the nVidia graphics drivers? I have a 20" monitor that has a resolution of 1600 x 1050 and I would really like to take advantage of that.
View 14 Replies
View Related
Dec 15, 2009
I attempted to do the upgrade from 11 to 12 with the Preupgrade Assistant. Unfortunatly something went terribly wrong. Everything went well, excluding the size of partition error, untill the reboot. I did have to remove two previous installs. Now grub gives me an option to upgrade to Fedora 12. When I select this the screen runs code quickly and the screen goes blank with alot of disk activity. Then nothing. Is there a method of recovering this install? I am fairly new to Linux Administration and I am just knowledgable enough to mess things up.
View 1 Replies
View Related
Sep 19, 2010
I have just upgraded my FC12 installation to FC13. The initial boot failed (just blank screen). Second time I received 'selinux targeted policy relabel is required'. I let that run, but still the boot did not suceed.
I then went in to verbose boot and saw that the boot would hang at libvirtd. So I disabled libvirtd for anything above run level 1. Next boot failed at atd, disabled atd. Next boot failed at 'monthly Smolt checkin'.
At that point and booted in to single user mode and dissabled SELinux, thinking that was the cause of all the problems. That did not help.
The update process has also removed my previous kernels, so I can't test a different kernel
View 5 Replies
View Related
Oct 10, 2010
I am able to get fglrx driver to work with 10.10, but as soon as I change my displays settings to have my good old dual screen setup, I get a blank screen when I reboot the system.
View 9 Replies
View Related
Jul 14, 2015
When I mount Debian 8 live into VMWare Player 7.1.2 64bit, it works awesome with and without graphics acceleration enabled i.e I can get into the desktop and all that.
But, when I installed it, the reboot is just a blank screen. I am not sure how I can proceed from now.
I am on Windows 7, 64bit Ultimate.
View 10 Replies
View Related
Apr 14, 2011
I Just installed OpenSuse 11.4-32 bit with KDE 4.6 on my PC. At first boot everything was working, then I added the community ATI/AMD repository to get the drivers for my ATI 5570, but after reboot i got a blank screen. So I ran the "failsafe mode" in the boot menu, it worked (3D accel. as well), but just for the root user. To make it work for the non-root user had to set the setuid bit for /usr/bin/Xorg. (is it ok to run xorg with superuser privileges?) Then I tryed to understand wich is the kernel option actually needed for X to start, and after a few attempts I realized the only option really needed is the "nomodeset". what is the nomodeset option for? and why I need it to run in the graphic mode?
View 9 Replies
View Related
Jan 14, 2010
I had ubuntu running just fine on another computer, but had to move things around to make Windows7 run better. So after backing up Home, I switched hard drives, pulled the video card, and adjusted RAM, I tried booting up. The computer found all the changes and did its thing. But then it hung with a blank screen. I figured that it didn't recongnize the video driver for this computer, or something, so I did a fresh install with 9.10 to start over from scratch. The boot up went great, and finished completely. I made a few changes to the desktop, and loaded in my archived firefox bookmarks and evolution files. After rebooting, the first ubuntu logo came up, but then the blank screen, with no drum sounds. I tried a few more times rebooting and hitting esc, but I don't know what I am doing at that menu. I also tried the F1 option, but again, I don't know anything. One other time I was able to boot into ubuntu all the way when I was hitting esc slowing (waiting) and somehow was able to get the login and the desktop just fine. I haven't been able to get that to happen again.
Can someone walk me through the steps to troubleshoot this? I don't know any terminal jargon or commands, and haven't really got a clue, but I really want to learn and figure this out. I don't even know how to go in from the command line to see what my system specs or video specs are to tell you.
View 1 Replies
View Related
Feb 4, 2010
i wonder if any one can help me, i have just installed 9.10 on my Dell Optiplex P4 2.0GHz 512MB RAM 200 g hd.install went well up till i eject cd at the end,when it try to reboot all i get is a blank screen ?
View 2 Replies
View Related
Aug 19, 2009
This is probably not possible, but just wondering, restarted centos 5.2 remotely, hung at shutdown, kvm'ed to see what was hanging it up, control c'ed and then ctl alt del, just trying to kill the process, was brought back to the login screen, but unable to type anything. Alt-f1 switched to a different virtual console, which was just a blank screen and a blinking cursor, but now able to type things. Want to avoid hard shutdown. Is there anyway to force shutdown/reboot the machine from this console?
View 1 Replies
View Related
Oct 12, 2010
I've been trying to install 5.5 here for the past few days, first from USB and now from the CDs, with no success. The problem occurs when I reboot after installing. After the BIOS has done it's thing I'm faced with a blank screen with a blinking cursor at the top left of the screen.
Initially I assumed that this was due to the intel driver problem which is reported in the release notes as a known issue, and the PC I'm installing on has intel graphics. However I have now done a text install and still have the same issue. I'm able to boot up the system using the CentOS live CD, which encounters no issues, and it mounts the local system no problem. After unmounting and remounting to get write access I'm able to change the device entry in /etc/X11/xorg.conf to have the Option "DDC" "false" entry. I can also see that the runlevel is set to 3 in /etc/inittab, still I get the blank screen on attempting to boot.
Any ideas on what might be wrong here? It really sounds like the intel driver problem people have described, and yet I can't even boot in text mode so that doesn't seem to be the case here. Could there be something wrong with the bootloader?
View 2 Replies
View Related
Mar 1, 2010
The wubi installer copied files successfully and asked for reboot. After booting into Xubuntu the flashing logo appeared for a minute. And then the screen looked as if it was trying to show something but could not and flickered and then became dark this continued till half an hour and then I pressed Alt+Ctrl+Del.I tried all the modes but to no avail, only the last mode with command line was working. But it was not helpful for me becoz I dont know most of the commands.When I tried "Verbose Mode" as directed by the WubiGuide - Ubuntu Wiki, CTRL+ALT+F2 did not work when the installer stopped.The computer I use is assembled with Intel pentium 4, VIA chipset and Mercury(Kobian) motherboard.
View 3 Replies
View Related
Apr 5, 2010
i have installed ubuntu 9.10 on my hp nx6325 notebook, and everything was working just fine, then it updated and problem started coming up. First the computer wouldn't reboot after the update, blank screen, then i manually reboted and now some programs don't work (ubuntu software center, update maneger, avant window navigator)
i assume the update did some damage, so how can i repair this, is there a recovery tool or something.
View 8 Replies
View Related
Feb 27, 2010
I have Fedora12 and it was working fine all through. I Installed Skype yesterday and since it was working, I installed the following using instructions from a blog. These were to install
yum install libXv.i686*
yum install libXScrnSaver.i686*
yum install qt.i686
yum install qt-x11*.i686
yum install libsigc++ libsigc++.i686 qt.i686 qt
Skype started to work well. However, after I rebooted the system, all I get is a blank screen with a blinking cursor. I am able ot get to tty by doing ctrl+alt+f2 but am not sure how to proceed from the above. I also erased the above packages thinking that that might solve. But it hasnot solved the issue.
View 1 Replies
View Related
Jun 19, 2010
i am trying to install opensuse 11.2 to my vaio laptop i have win7 pro 64 bit already installed so i'm trying dual booting i have followed the below steps1- on windows, shrink the c partition and create a new unused volume for suse2- install the suse 11.2 on the new unused volume with hdd config like sda4 swap 4 gb sda5 20 gb / ext4 sda6 120 gb ext43- selected custom packages and started the installaton4- installation started smoothly and after installing packages it tried to reboot the machine at the end. But after this point the reboot operation has failed and gave a blank screen.
At the end the installation failed.I started the machine vaio boot logo comes and stops. i can't even enterbios setup or change boot options.I have unplaged the hd reset the partions, pluged it again and recovered win7So i think the installation damaged the file system.i have tried the above steps 2 times and came up with the same result.I have installed fedora 13 before with no problem.
View 9 Replies
View Related
Oct 23, 2010
I have an HP 2730pAfter upgrade i have a blank screen. i don't get a splash screen and i can't alt+ctrl+F6 to get extra terminal.Unfortunately i can't ssh into the box either since i don't have openssh-server installed.Is there anything i can do short of taking the harddrive out and putting it into another box?
View 2 Replies
View Related
Apr 3, 2011
I just tried to upgrade from 11.3 to 11.4 Using iso on DVD. All went well until the stage where the screen says something like "rebooting from installed system" when the screen just went blank. After removal of the DVD and re-start of the system, selecting the normal Desktop from the boot menu just returns me to the blank screen. I never see a login screen.
Selecting Failsafe caused what appeared to be a complete normal sequence with a Login that worked and I ended up in KDE4 (my usual desktop) with everything apparently working, even WIFI. But the next time I re-booted and selected Failsafe I just got a command prompt. I now find that selecting Failsafe alternates between the GUI and a command prompt on each attempt!
[Code]...
View 8 Replies
View Related
Apr 7, 2010
Last night I upgraded from 9.04 to 9.10 in search of faster internet (which I got by the way), but now whenever I try to boot it goes to a blank screen for about 10 minutes befor going to the desktop. Its completely blank and has no cursor or anything. It's a huge problem and I could really use some help. 9.04 never did this.
View 9 Replies
View Related
Jan 25, 2011
Just upgraded to 10.04. All is well save one little problem. I use both Gnome and KDE. When using KDE, instead of going back to the login screen when logging out, I get a hanging, blank screen. At the top it says,(starting MySQL database server MySQLD.) I have to shut down PC and reboot. Gnome part works fine.
View 9 Replies
View Related
May 1, 2011
I have a Toshiba Satellite P105. Did the upgrade. Everything went smooth until the reboot. After that the deep black. I am suspecting Nvidia driver. "F" key maneuver brings a flash of the booting process. That is quickly followed by a mosaic screen and a numb computer.
Other than nuking the system and re-installing 10.10 any constructive idea?
View 3 Replies
View Related
Mar 23, 2010
im running karmic on a macbook pro 5.4. everything worked fine for a couple of months until i upgraded yesterday. (apt-get upgrade) now i'm getting a blank (black) screen when booting right after the splash screen appears tough the system comes up propperly since i can connet using ssh. the xserver is up and running regarding to the logs. i can't even switch to a console (alt-crtl-f1) nor booting in single user mode. the screen gets black after the kernel boot and init starts.
View 5 Replies
View Related
Sep 4, 2010
I did an upgrade and now after grub starts I get nothing but a blank screen. I should have left the well working alone. Any suggestions on what to do? I have no terminal, nothing any longer.
View 6 Replies
View Related
Dec 22, 2010
Ubuntu 10.10 32 Bit
Wine 1.3.9
Alright so this happens to me after every time wine updates from the wine PPA. Foobar2000 works fine till Wine updates, after it updates it pops up a full sized window and instead of it looking like it should it.... looks like whatever was on the screen when the window opens. It's non functional. I tried using the portable version of wine this time and the same thing happens after a update. This is... sad for me because I use it for transcoding.
Bellow is what was spat at me when I ran it thru a terminal.
Quote:
grammatrain@tprb:~$ wine /home/grammatrain/Desktop/foobar2000/foobar2000.exe -opengl
fixme:heap:HeapSetInformation (nil) 1 (nil) 0
err:alsa:ALSA_CheckSetVolume Could not find 'PCM Playback Volume' element
fixme:win:RegisterShellHookWindow (0x10066): stub
grammatrain@tprb:~$ wine /home/grammatrain/Desktop/foobar2000/foobar2000.exe
fixme:heap:HeapSetInformation (nil) 1 (nil) 0
err:alsa:ALSA_CheckSetVolume Could not find 'PCM Playback Volume' element
fixme:win:RegisterShellHookWindow (0x10066): stub
View 3 Replies
View Related
Jan 22, 2011
I had a working ubuntu 8.04.x system. I ran the update manager to upgrade to 10.04.1 LTS. Everything seemed to run fine up to the point where it needed a restart. Upon restart, it spews out a stream of log messages, changes the font of the log messages already displayed, and then the screen goes blank and the system does not respond to keyboard or mouse. It appears as if the system is trying to set up the monitor and messes up.
If I ESC into grub after BIOS boot, I have the option of booting two different kernels: 2.6.32-27-generic and 2.6.24-28-generic. The original ubuntu 8.04 kernel was 2.6.24-24-generic(though I did do some updates might that be the 24-28 kernel?).
Booting the 32-27 kernel results in the behavior described above.
Booting the 24-28 kernel produces a stream of log messages that scroll past to fast to read and drops into ash. One of the last messages is: !ALERT /dev/disk/by-uuid/ xxxxxx does not exist -which is true because there is very little in the /dev directory.
View 4 Replies
View Related
Jul 16, 2010
I have just performed an upgrade from OpenSUSE 11.2 to 11.3. My Machine is a Lenovo W701DS laptop which uses an NVIDIA FX3800M graphics card. The system was working fine under 11.2 before the upgrade.
After upgrading to 11.3 the splash screen after GRUB comes up for about 1 second before the screen goes blank. After about 5 mins I am able to SSH to the Laptop and access the system. Doing this I created an xorg file using "X -configure" and copied the new file to the /etc/X11 directory and renamed to xorg.conf.
If I SSH to the laptop change run levels to init 3 then init 5 the Gnome comes up and I have graphics the system works However I am unable to access the text consoles using alt+f1, f2 etc. If I restart the system it is back to the blank screen.
I have attempted to install the NVIDIA drivers however the installation fails due to an error with gcc or kernel source versions. Error log reports that the kernel was complied using a different version of gcc.
View 3 Replies
View Related
Sep 8, 2010
During the upgrade process, all the files appeared to install correctly and the computer rebooted as expected. It then showed the openSUSE splash screen but eventually that went dark and there was no display. Rebooting again did not help. Hitting Ctrl+Alt+F1 results in a corrupted display. I'm guessing this is an issue with the video driver? Not sure how to troubleshoot when I can't even get a terminal window open!
HP Pavilion dv6500 laptop with an nVidia GeForce 8400M GS.
View 9 Replies
View Related
Mar 28, 2010
I just upgraded from 9.10 to 10.04 beta and now I get the login screen - but after logging in, all I get is a blank screen with a black bar on top showing just the time on the top right hand corner. If I CTRL+ALT+F1 and reboot using the command line, it restarts showing mythbuntu on shutdown. Im have nVidia GEForce 8600 - is this due the X crashing? I tried all these - no change
Code:
sudo dpkg --configure -a
sudo apt-get install --reinstall ubuntu-desktop
sudo apt-get install -f
View 9 Replies
View Related
Jan 18, 2011
The only thing I remember being updated is xserver, but I know there were other packages updated.
After the splash screen, a text login is shown. If I do nothing, it goes right to a black screen, but first there are weird red pixels randomly strewn about the screen. If I quickly login via the text screen, it then goes to the same black screen. Either way, there are the weird red pixels and a few flashes of the screen before going black.
This happens 100% of the time.
I have tried:
booting with recovery mode and selecting repair packages (no packages are broken, missing, etc.)
booting with recovery mode and selecting startx with failsafe (same black screen)
booting with older kernels (same thing)
View 5 Replies
View Related
Jan 29, 2010
So xorg was acting up, and I went into the Hardware Drivers menu to see if the driver had a problem. The driver was disabled, and could not be activated. I downloaded the new ATI driver. I uninstalled the old one, installed the new one, and ran the config step just like it specifies in the install instructions. Upon reboot, I got a blank screen instead of the login screen.I managed to drop back to the command line and uninstall the driver, so now I'm stuck in ubuntu with one monitor instead of 2.
I'm going to attempt to revert to the old ATI driver (which I still have in my home dir), but I wanted to be sure to get this into the forums before I ruined my GUI again.
View 2 Replies
View Related
