OpenSUSE Install :: Grub - Not Able To Boot 11.3 / Screen Blank?
Aug 1, 2010
I installed 11.3 as a new install over 10.3, kept the $home and windows partitions, and let it reformat the other two partitions. NO disk partitioning structure was changed.
I did get a warning that GRUB over 128GB might not be able to boot.
I did enable the MBR.
GRUB menu does come up, but upon selection of SUSE 11.3 entry the computer screen blanks, and nothing happens. Selecting Windows does work upon power-up.
I did not have this 128GB issue with 10.3. What are my options? I am really afraid to install 11.3 on production machines now (running 11.2).
View 3 Replies
ADVERTISEMENT
Nov 13, 2010
A surprising thing has happened! I have been happily using open suse 11.3 on an HP probook 4320s laptop. On reboot this morning, the screen starts out fine, but progressively fades into white and the boot does not seem to happen (at least there is no sound, since I cannot see anything). I am left with a completely white screen. Things are fine with the failsafe mode.
View 9 Replies
View Related
Mar 28, 2010
Since 11.2 installed but shows blank screen at boot despite booting into runlevel 3 with acpi=off and noapic, I decided to try 11.3 M4 again.Media check is OK for 11.3 M4.Boot from MBR. GRUB menu shows Ubuntu and Windows 7 as well as openSUSE 11.3 desktop default and 11.3 failsafe. Both opensuse11.3 default and 11.3 failsafe return a blank screen despite the following boot options:
33 acpi=off noacpiI still cannot get to a terminal to run sax2. I read from a thread of opensuseforums (Opensuse 11.2 Blank Screen) where similar problem was solved using the correct driver which is actually "ati", NOT "radeon" for ATI Technologies Radeon Xpress 200M.Then because both Windows and Ubuntu boot fine from GRUB menu, it occurs to me I should boot up Ubuntu and try to locate openSUSE's /etc/X11/xorg.conf in order to edit the file and change the driver to "ati".In Ubuntu, xorg.conf of opensuse 11.3 M4 shows:
Section "Device"
Identifier "Configured Video Device"
EndSection
[code]...
View 6 Replies
View Related
Apr 18, 2010
I have tried two distros - Mandriva and OpenSuse. Both provide the same results, though Mandriva booted...but still the same problem, after installing blank screen comes up and nothing. Keyboard touch bad, mouse nothing happens. I would prefer openSuse but may have to switch.
Equipment:
Acer 7740 17" laptop
Intel i3-330M Chipset
4Gig DDR3 RAM 1066
Intel Integrated HD Video 128MB
Install Win7 64-Bit no issues, wiped and installed Linux and I cannot get past this blank screen. Installation works, no problem installed packages etc. When coming up on 1st boot, login - boom nothing? Searching the web and I suspect the Intel graphics are the problem but I'm not sure.
I bought this laptop to put Linux on it solely for a personal project of using Linux for a year. I'm an IT professional for 23 years and comfortable with CLI.
View 9 Replies
View Related
Jul 1, 2010
I have been trying to install openSUSE on a dell Latitude XT all day, and every time I tried to live boot, I got a blank screen. I finally decided to do a text install and I got it installed, but now I get the same result from booting off of the splash screen.
I can boot into text mode fine (still) but for whatever reason, it bombs as soon as I tell it to load the GUI. I have a 1.2 GHz Core 2 Duo, 3GB RAM, and an ATI mobility chip (2000 series, maybe?) I had the same problem with Ubuntu, and since I like openSUSE just as well, I figured I'd try it because I at least could do a text install from my liveCD.
View 2 Replies
View Related
Nov 4, 2010
For some reason, sometimes after I just turn the computer off by pressing the power button while hooked up to the video mount, I'll turn the computer on and (after it automatically logs into the standard user) come to a blank black screen. The only thing I can access is by pressing Alt+Tab to get a "no present windows" window, and thats it. Could it be that an activity or something has been deleted somehow?
View 1 Replies
View Related
Feb 26, 2010
I've been running openSuse 11.2 for a while on my notebook.Today I turned it off at work and came home. When I tried to turn it on, it boots, shows a black screen written 'GRUB' and then NOTHING. It doesn't complete the boot process.
View 9 Replies
View Related
Jun 19, 2010
i am trying to install opensuse 11.2 to my vaio laptop i have win7 pro 64 bit already installed so i'm trying dual booting i have followed the below steps1- on windows, shrink the c partition and create a new unused volume for suse2- install the suse 11.2 on the new unused volume with hdd config like sda4 swap 4 gb sda5 20 gb / ext4 sda6 120 gb ext43- selected custom packages and started the installaton4- installation started smoothly and after installing packages it tried to reboot the machine at the end. But after this point the reboot operation has failed and gave a blank screen.
At the end the installation failed.I started the machine vaio boot logo comes and stops. i can't even enterbios setup or change boot options.I have unplaged the hd reset the partions, pluged it again and recovered win7So i think the installation damaged the file system.i have tried the above steps 2 times and came up with the same result.I have installed fedora 13 before with no problem.
View 9 Replies
View Related
Jun 3, 2011
I recently wanted to install ubuntu 11.04 on my computer (which had vista on it and I wanted to just completely wipe that out). After the install I noticed that my monitor would not receive signal during boot (I heard the little drum noise but my monitor said no signal). So I tried following these instructions (which have worked in the past): [URL]
but when I boot the computer I don't have a GRUB menu! It just automaically starts booting ubuntu 11.04. Is this because that is the only OS I have installed? Did I do something wrong? What can I do to fix the problem?
View 2 Replies
View Related
Mar 19, 2011
I am trying to install Ubuntu Server 10.10 on a computer with 5x 1.5 TB HDDs. I went through the process of partitioning the five hard drives into three partitions each:
sd*0 is a 300MB partition for /boot, RAID1, 2 active, 3 spare
sd*1 is a 500MB partition for swap, RAID1, 2 active, 3 spare
sd*2 is a 1.5TB partition for /, RAID5+LVM, 5 active, 0 spare.
md0 is the raid1 on sd*0
md1 is the raid1 on sd*1
md2 is the raid2 on sd*2
During the install, everything seemed to work fine with the formatter, but the installation ended in error. I booted into rescue mode and found that though all the drives were U (in /proc/mdstat), it was resyncing. I let this run (overnight) and the next day, jumped back in and installed the OS successfully.
However, after installing GRUB, when the installation process asked me to reboot, the system came back up with a blank screen (blank, save for a blinking cursor) and didn't move from there. I am thinking that the problem is GRUB, since I can boot into the main LVM partition via the rescue option on the install cd. Here's what bugs me:
[Code]....
View 9 Replies
View Related
Jan 28, 2010
I've run into a strange problem recently. My primary OS right now is Windows 7, and OpenSUSE is secondary. I had GRUB as the bootloader, and everything seemed fine, but I ran into one problem in Windows 7: one program refused to work correctly with ATI forced anti-aliasing on, but it is needed by others (or else edges look jagged).So I decided to install ATI Tray Tools. But it seems that Windows 7 is being evil and won't let install drivers that their creators didn't pay Microsoft for (thank goodness that's not the case in Linux). That means I had to use a driver overrider program, and that means that it had to change the Windows 7 BCD options. And that's where bootloaders kick in. It seems that Windows 7 is too lazy to check for its BCD on other than active partitions, so it doesn't allow the overrider to function.
So what I did was change GRUB to boot Windows 7 with makeactive flag. The problem now is - it won't deactivate! I no longer get GRUB's boot screen, it just boots to BCD directly. So my question is - is there a way to deactivate (or, rather, reactivate the /boot partition) after Windows 7 shuts down or restarts automatically? Obviously I don't want to use GPartEd each time I want to boot to Linux.
View 7 Replies
View Related
May 1, 2010
I have just updated to 10.04 on my Dell Insperon 8200 laptop, and all seems well with Linux.My problem is that although it shows in Grub Windows XP will not load. I just get a blank screen with a flashing cursor.I have tried to grub-mkconfig and grub-update, both of which reported successful results.However on reboot I still get a blank screen for windows.This was not an issue with 9.04 and 9.10.so I don't think it is the machine.
View 5 Replies
View Related
Nov 2, 2010
I installed Win7 after Ubuntu (10.10). I attempted to reload grub so that I would be able to run them dual boot and now I can't load anything.
I followed the guide here: [url] and went threw it a couple of times now to make sure it wasn't user error.
I am using a live cd from 10.04 because it's the only one I have. Any chance that's why it isn't working properly? I wouldn't think so, but I assume that it's possible.
If that is the case; Any way to solve it without using the live cd? I cannot burn a new disk because I have to boot from disk to use my computer right now.
I just get a flashing cursor on a blank screen when I try to load.
View 9 Replies
View Related
Jan 24, 2010
I am testing some boot splash screens but the ones I like most are darker and therefore the black font color during boot, well, shows on dark grey or black background, so I can't see.
I would like to change the font color of the messages, but not the results (green=DONE, red=FAILED, etc., I don't want to change that, only the messages like "doing fast boot", "Loading CPUfreq", and all the ones loading stuff, mounting, etc.).
Apparently I need to edit /lib/lsb/init-functions?
I found a few examples on google, mostly for debian based and the ones I have seen are far more complex than the very simple one opensuse uses. So I am stuck here. 11.2 version.
View 5 Replies
View Related
Jun 11, 2011
When openSUSE was installed, GRUB information was installed in the Extended partition rather than in the MBR.
I have a triple boot system: Windows XP Pro, openSUSE, and another popular distro on Linux. The other distro put GRUB info in MBR. Now when I boot up it goes to member first. If I select openSUSE, the GRUB info in the extended partion is accessed and a 2nd selection screen is displayed.
I tried reloading the GRUB data for openSUSE selceting to install it in MBR but this does not seem to work.
How do I get rid of the GRUB stuff in the extended partition so that the 2nd GRUB screen does not get displayed?
View 6 Replies
View Related
Mar 28, 2011
I installed CentOS 5.5 last night using the DVD ISO (from a USB drive thanks to the Universal USB Installer). I selected the Server and Virtualization packages, and finished the install all the way through. At the end, the installer asked me to remove any installation media and reboot the system. After rebooting, the system hangs on a blank screen with a blinking cursor in the top left corner that does not accept text. This is before the GRUB screen appears. For partitioning, I created a 4GB swap partition on sdb and a 16GB ext3 partition on sda, mounted at /, with the remaining free space on sdb mounted at /storage.
Does anyone know why this system is hanging before the GRUB menu?
View 4 Replies
View Related
Apr 17, 2011
I noticed that after making my build in suse studio my system freezes immediately after GRUB ( Normal or Failsafe) boot splash screen. I also noticed that this happens only with the specified kernel below. I'm not sure when using Kernel 2.6.37, one had the same problem. I never used it. The original kernel 2.6.34 had no problems such as the one I have described. My systems has no further problems only that it takes several restarts to go past the "Freeze". Below is a list of my system specs:
openSUSE 11.3
Kernel-pae 2.6.38.2-4.1 from Kernel Stable.
GRUB 0.97-174.1 from openSUSE 11.4
Upstart 0.6.5-33.1
xorg-x11-server 7.6_1.9.3-142.1 from X11:xorg 11.3 repo.
The GRUB from openSUSE 11.4 has been very stable and non-problematic. I will be buying an Intel core i5-2500K in a few months that's why I need the latest kernel and XOrg-X11-server. What could be causing the freezing?
View 6 Replies
View Related
Mar 19, 2011
i just installed opensuse yesterday and it's very nice. i wanted to install the driver for my ati mobility radeon hd 5470, so i followed the steps on:SDB:ATI drivers - openSUSEunfortunately, after the reboot, opensuse had booted but there was nothing on my screen (basically, just a blank screen)
View 7 Replies
View Related
May 4, 2010
I installed a new graphic card from ATI 5770 (Club3D). After I did it I removed the propriatery ATI drivers I had installed thru the "Hardware Drivers" in Ubuntu and rebooted. Then I couldn't get into ubuntu again. When it starts booting the display just shuts down and says "Power Saving mode". The computer continues to load things etc. left it running and hoped it would show itself... nothing.
Anyway this happens everytime even with Live CD so I can't even get to a terminal... Started the boot without the splash and it went blank after it started some Speech thing. Just before that there were a few firmware files missing.
View 8 Replies
View Related
Apr 11, 2010
I've been trying out linux distros to see which I want to progress further with. I have a bunch of removable HDDs. I put a single distro on each HDD. I just installed CentOS 5.4 on a machine that has had successful installations of Debian 5.0.3, Fedora 12, and OpenSuse 11.2 installed on it. I still have those HDDs and they still boot and run fine.
CentOS 5.4 installed in graphical mode just fine. I even noticed that it appeared to probe my video card (ATI Radeon 9250 AGP) just fine. I removed the media and rebooted and the CentOS graphics came up fine, and it asked me a few questions such as could I hear the sound. Everything went fine when it said it was now booting to CentOS for the first time, and the screen went blank. The monitor LED stayed green, however, so it looks to me like the monitor still sees a signal.
I'm guessing I need to boot into text mode and fiddle with the display settings, but I'm pretty much lost there.
I did a lspci under Fedora and it lists the following for video:
let me log out of my dang XP machine, and cut and paste the entire stuff straight from the machine I installed CentOS on which is now running Fedora 12.
View 3 Replies
View Related
Nov 19, 2010
I just recently got a Dell Inspiron 1525 laptop and have installed Debian on it. When I installed it, I did not install the 'Graphical desktop' packages...only the 'Standard system utilities'Everything has been fine, however when I installed Xorg (aptitude install xorg) and restarted my computer, my screen goes blank at bootup. I can see the grub menu, as well as the beginning bootup process, up until udev begins to load. I have a feeling it has something to do with KMS now being loaded but am not sure.
View 7 Replies
View Related
Jan 9, 2010
So I currently have an install of Karmic running that has been upgraded over the years but I am repartitioning my drives so I did a fresh install on a new drive.
My first problem was the live cd would not boot and I had to use the alternate cd to do the install. It would boot into a blank screen and the i915.modeset=0 kernel parameter did not help.
After the installation finished I went to try and boot and found that right when it went to initialize the graphics, my computer locked up hard. Keyboard unresponsive and all. I read the forums and I tried using the kernel parameter i915.modeset=0 and removed quiet and splash from the kernel line to see if I could spot any errors but nothing appeared.
I am able to boot into recovery mode, and I tried even running an apt-get upgrade to get all my packages up to date and installed the latest nvidia driver but still have this issue.
I'm at a loss as to what I should attempt next.
Here is boot info, just to clarify sda and sdb are a fakeraid on my old setup, sdc is my new install
Boot Info Summary:
View 1 Replies
View Related
Apr 15, 2010
So I Installed OpenSUSE A Plethora Of Times. In Both 32 & 64 bit. But No Matter What After It Boots Up And Where I Should See Some Kind Of User Interface The Screen Is Blank. Now this Is The Point Where You restart The Computer And See Where You Went Wrong But Come to find Out My Power And restart Buttons Dont Respond So i Have To Pull the Battery Out Of My Laptop.
View 4 Replies
View Related
May 7, 2010
After struggling to install openSUSE 11.2 on my computer with ATI radoen graphics, I finally managed. Rebooting just after initial installation caused my laptop to give me a blank screen, no command prompt, nothing. With some help from the only post with such a problem on Ubuntu website and after first installation, I did the following:
1. Boot from Live cd of opensuse 11.2
2. Mount the partition which has root.
3. check for and delete Xorg
[code]...
View 4 Replies
View Related
Jul 5, 2010
i installed, few days before susu 11.2 . now my lcd only has resolution of 800x600, so i type "sax2". after he made that config, suse displayed me a gui, where i can change resolution and my frequency. i selectet native resolution and freq. (the right nvidia driver and lcd was detectet) and hit that apply button, then i needs to restart. done it, but then i got after that loading bar of suse only blank screen. so what was wrong ? and what i can do now to fix ?
View 2 Replies
View Related
Aug 29, 2010
I have the problem (11.3) that the screen is blanked after 10 minutes (console and KDE). After some searching, I found out, it is a kernel "feature". Since it is a server, which should display network status permanently on screen this behavior is fatal.
I have tried:
- switch of power features vie Grub kernel param: apm=off, powersaved=off
- in kde via screensaver options
- in term "setterm -blank 0"
View 9 Replies
View Related
Apr 3, 2011
I just tried to upgrade from 11.3 to 11.4 Using iso on DVD. All went well until the stage where the screen says something like "rebooting from installed system" when the screen just went blank. After removal of the DVD and re-start of the system, selecting the normal Desktop from the boot menu just returns me to the blank screen. I never see a login screen.
Selecting Failsafe caused what appeared to be a complete normal sequence with a Login that worked and I ended up in KDE4 (my usual desktop) with everything apparently working, even WIFI. But the next time I re-booted and selected Failsafe I just got a command prompt. I now find that selecting Failsafe alternates between the GUI and a command prompt on each attempt!
[Code]...
View 8 Replies
View Related
May 11, 2011
After I install SUSE I reboot and click on Desktop it then goes to a loading screen. After that it scrolls a lot of info then the screen goes blank. I have no idea why and I have tried it on 3 different computers with the same problem.
View 3 Replies
View Related
Jun 8, 2011
I recently tried to upgrade my openSuSe 11.1 system using the instructions at:
SDB:System upgrade - openSUSE
I successfully got the system to 11.2, but the upgrade from 11.2->11.3 went awry. The installation froze during the update, and I had to start it over. The first issue I had to deal with was the fact that rpm had been upgraded and zypper hadn't, so zypper wouldn't function because older rpm files that it would search for had been deleted. After rolling back rpm to a previous version, I managed to complete the upgrade to 11.3 and everything looked good. However, when I rebooted the system, it hangs at a blank screen. More precisely, the system seems to get through all of the BIOS stuff and then hang while loading the OS (I assume). Although I've worked on Windows boxes for a long time, I'm a complete novice at OS installations/upgrades for Linux systems, so I'm not even quite sure where to begin to troubleshoot this. Ideally, I'd like to be able to fix the installation on the system to save the data on the hard drives, but I realize this might not be possible. My first thought was to use a recovery tool that I'd seen on some Linux installation CDs, but I see that for openSuSe 11.3 and on that utility has been dropped. I can, however, use the disk to get to the "Rescue" command prompt, so maybe there's something I can do from there?
View 9 Replies
View Related
Jul 18, 2010
I just installed 11.3 on a Toshiba Satellite A305 laptop. After going through the install process it restarted (without a full reboot I believe) and spent a very long time going through a bunch of message. E.g. it spends about 10-15 minutes building java fonts, and warning me that Japanese/Chinese/Korean might not work in Java.About 20+ minutes after bootup it finishes with all the status messages (including a message that said it couldn't execute /usr/bin/cmp !?) and goes to a blank screen with a mouse sprite -- first a spinning circle, then a regular arrow sprite. So it's not a totally black screen, but all I have is the mouse sprite.
I let it sit there for over an hour.I think it was hitting the disk but nothing happened. I tried rebooting and it did the same thing.I tried setting the "nomodeset" boot parameter, which had helped someone with a similar problem no change.I tried it in failsafe mode no change.
View 9 Replies
View Related
