OpenSUSE Install :: What Is The Correct/safe Way To Move From Upstart To Systemd
May 3, 2011
What is the correct/safe way to move from upstart to systemd? I originally installed upstart in 11.3 and have now upgraded to 11.4. Having successfully upgraded to 11.4 I tried to use yast2 to install systemd and systemd-sysvinit onto my running system. Yast correctly identified that upstart should be deinstalled as a prerequisite for installing systemd-sysvinit.
After the install of systemd the system wouldn't shut down, and on a reset the system reported many systemctl/start service timeouts on things such as mounts and ttys. Eventually the system started an X-windows KDM login, but there were no console ttys and mounts were missing. I used X/kdm to login to root - phew! - I restored / from an rsync backup I'd made prior to the changes, so I'm back in business with upstart. I'd like to tidy up and move to systemd - I going to have a nose around myself, perhaps I will try switching back to sysv init and then going to systemd - but I have to wait for the machine to be idle before I experiment, any info in the mean time would be great.
View 3 Replies
ADVERTISEMENT
Jul 30, 2011
I've proven that the the D in systemD is for DISASTER.At first, I thought that the dozens of problems I had with startup, shutdown, and services, was due to my upgrading from Fedora 14. But now that I've tried a fresh install, I have a new set of different problems. Basically DBUS broke after I installed Samba, and no combo of reinstalling either of them fixed anything. So here goes my third Fedora 15 install.
During a fresh install, can I de-select systemd and select upstart and sysv instead? systemd is not visible in the GUI installer. Do I need some Kickstart hack or something? Is this possible at all?
View 11 Replies
View Related
Jul 4, 2011
Because of my problem here:[URL]..I'd like to replace upstart with systemd on F14. Is this as simple as a yum install? In the wiki is it's referred to as a "technology preview" for F14, which is meaningless to me; there are no further notes about installing or enabling it.
View 1 Replies
View Related
Jul 16, 2010
I'm running the new OpenSuse 11.3 64-bit. how to switch from SysVinit to Upstart?
View 1 Replies
View Related
Nov 28, 2010
I have installed SystemD in in parallel to SysVInti(with OpenSUSE enhancements). When I starting SystemD, startpar is also running. I suppose, i should add starpar.unit to SystemD configuration. I asks for help, because I won't broke my system.
View 2 Replies
View Related
Jul 13, 2010
I am setting up tomcat server on my Centos 5.5 machine. I've been advised to run tomcat on 8080 as non root user and redirect traffic to it from port 80.
I searched and found the following iptables commands for this:# iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT -to-ports 8080
# iptables -I INPUT -p tcp --dport 8080 -j ACCEPTI have a doubt:
Tomcat is not accessible via port 80 without the second command. But the second command opens 8080 and makes it accessible over the internet (tomcat is accesible via both: www.<website>.com and http://<ip address>:8080). This doesn't seem right. Is there some simple (iptables) way to redirect traffic "internally" from port 80 to 8080 without having to open 8080 to the internet.
View 3 Replies
View Related
Jul 2, 2015
I use debian 8 with xfce. but I have big problem with sound and I want move to default desktop manager gnome 3 in debian . I install many pakages ?
how I can move safe from xfce4 to gnome3...
View 8 Replies
View Related
May 6, 2010
I have a Ubuntu 10.04 server configured with an lxc container also running 10.04. I wonder if somebody knows the correct procedure to move such a container to another server? I tried a straight rsync both with the source up and down but mysql won't start on boot after move and if I manually start it none of the websites within the container are able to connect to mysql. I can connect to mysql using telnet of the command line client.
View 1 Replies
View Related
Mar 15, 2011
I'm using OS11.3 64bits with KDE 4.6.1 and its working fine.
Would anyone recommend me to do an upgrade to 11.4 or wait? If 11.4 is good, then would anyone recommend me to do a network upgrade, or clean installation?
View 2 Replies
View Related
Feb 8, 2011
I tried to use systemtap but it complains about:
Code:
semantic error: missing x86_64 kernel/module debuginfo under '/lib/modules/2.6.34.7-0.7-desktop/build'...
[code]....
View 6 Replies
View Related
Mar 30, 2011
My old desktop had a power supply that was going bad, so instead of replacing it again I decided to buy a new PC Desktop. So I ordered from TigerDirect.com and got a grodd AMD computer without a operating system on it as I didn't want that Windows 7 scheisse on it. So I downloaded SuSe 11.4 64 bit, and installed it last night.
At this point I will tell you the new PC has an NVIDIA GeForce 61100 GPU for graphics with 128 mb memory. Also I use an HP W2007 wide display monitor running 1680 by 1050 resolution, that I got over 3 years ago when I was running SuSe 10.2.
So during installation last night of 11.4 when it did the first boot after install, is when I first saw the symptom which is an illegible white screen, with about 100 3 mm lines on it. So I shut down, rebooted and brought it up safe mode and all is fine. The error screen only appears if I boot GRUB with the Desktop or Xen option and only when the boot would switch to display my desktop.
I recall a similar illegible video monitor issue when I first got the display over 3 years ago, and fixed it by changing a SuSe video configuration option, but being I am getting old and I didn't write down what the configuration file was I am at a loss. All my previous SuSe installations never had a problem as I would always choose the Update rather than new install option thus that configuration file was brought across the many releases installations. This video configuration parameter had the monitor resolution sizes in it.
View 7 Replies
View Related
Dec 1, 2009
I want to use secure file permissions within OpenSUSE, but having to provide the root password for every window I click is just a little too much.Wonder what the setting "paranoid" does then. And I also wonder how to adjust the safe settings to not get prompted with every single click.
View 9 Replies
View Related
Jan 25, 2011
I got the blank screen when trying to install openSUSE 11.3 x64, so I was able to successfully install by choosing: Kernel (F6) > Safe Mode
Now I am trying to build my wireless driver, and I also notice that my touchpad is not scrolling. I had this OS installed in Windows 7 through VirtualBox before doing the clean installation, and I remember the touchpad scrolling.
I am thinking that by choosing Kernel Safe Mode to install openSUSE, that it did not install all the repositories, and it is why I am running into some difficulty.
what I need to do to fix my installation as if I had not installed in Safe Mode.
View 9 Replies
View Related
Jul 6, 2010
A little while ago i bought a magazine with the openSUSE 11.1 distro on it but couldn't install it so i gave up. I am attempting to have another go. The problem is that the os will work fine when booted from CD in fail safe mode and can be installed from there but when out of fail safe mode the system begins to boot but freezes and will do nothing more.
View 9 Replies
View Related
Jul 10, 2011
I used the zypper dup tool to upgrade my HP Pavilion dv6000 laptop and my display is now broken into columns and partially obscured. I can barely see anything on it. When I ran zypper it stopped about half way and locked up.I then ran it again to completion. At boot, GRUB gives me my startup options as before and is clearly readable with good resolution. When I select openSuse to start it, the screen goes blank for a few seconds and then comes back with the screen problems.
The problem continues all the way into KDE. I have approximately four columns displayed but I can barely see anything. Most of the lower half of what should be displayed is obscured so I cannot load any applications. If I right click, I can make out the dialog box and select the run command. From there I reran the zypper command using the 'zypper up rpm' option and it says "nothing to do" and the "highest update version is already installed."
The display problem also exists if I use the failsafe boot option. I remember having to download nVidia driver last year to get a better resolution, but 11.2 (64 bit) worked great until the repositories stopped working and I no longer was able to load software. Now I can't use the computer to download and burn a DVD version of 11.4. Again, I do seem to be able to use the terminal, so I could presumably fix something with it if I had the right commands and I do seem to have access to the repositories.
View 2 Replies
View Related
Mar 15, 2010
Am trying to install the correct driver for my RV710 Radeon HD4350 grahics card.which version out of these two I should install: * x11-video-fglrxG02 (for HD2000 series and later) * x11-video-fglrxG01 (for Radeon 9500 - X1900)
View 3 Replies
View Related
Dec 28, 2009
I've moved an OpenSUSE disk image to a new system and it boots fine to console mode. Is there a command I can run to re-detect and set all of my hardware settings (video in particular)? I've seen some references to running hwinfo on an individual object basis.
View 1 Replies
View Related
Jul 17, 2010
I am using openSUSE 11.1. I recently installed an additional hard drive since running out of space. New drive up and running, used Yast Partitioner successfully.
2 questions as follows:
1) New drive still has Windows XP on one of its partitions..Can I easily implement/set up for dual boot?
2) More importantly, I need to move root ("/") of file system to new drive "sdb" since more space available but not certain correct way to do this
Below are listings I think are relevant:
View 6 Replies
View Related
Dec 2, 2010
I had a Win7 laptop with Win7 installed on the single internal drive. Attached to this is an eSata external drive.I installed Suse on the external drive. The install is good. I have enabled the Win7 OS in GRUB.When the eSata is plugged in I am able to boot and choose which OS I want.When the eSata is unplugged, the boot fails with the following message:
Code:
GRUB Loading stage1.5.
GRUB loading, please wait...
Error 21
I assume, what I need to do is to move the GRUB install to my internal drive.How do I do this? Indeed can I do this?Or can I re-enable the Microsoft BootLoader and tell this bootloader to load either OS?
View 2 Replies
View Related
Feb 26, 2010
I came in this morning only to find that the Intel Core2 hyperthreading Dell machine is dead. It appears the processor is fried.
I have a new white-box X2 system that I will replace the dead Dell with. The X2 (AMD) does not have a hard-drive (HDD) so, I will simply put the SATA hard-drive into the PC.
Some of you may know how to do this, but I don't know where to begin after I get the Hard-drive in. (I know how to move a Windows configuration from one PC to another and handle it as it begins to blue screen (BSOD), but I don't have a clue with Linux)
This system was built with GRUB. At the very least, I expect the GRUB boot managet to surface on the display. But, what next....
I was testing an OpenSuse setup as a server. Nothing fancy and NO applications added. The only customization was the MB's LAN card and the display was set at 1024x768. I had 2 users, root and myself. What would you do? Is there some boot time options that I should follow?
View 9 Replies
View Related
May 24, 2010
I just got a new laptop and installed 11.1, and I want to move my swap file to a 8GB SD card I have. It seems to run very fast, so it will improve swapping speed. I created a swapfile with Partitioner, and I can delete the existing swapfile with GParted during a reboot - but I'm afraid I will make my system unbootable by doing that - don't I need to first tell OpenSuSE what swapfile (on the new sdb) to use? I'm pretty sure it will detect the new swapfile automatically during boot, but it might choke on a missing (old) swapfile.
View 6 Replies
View Related
Jul 18, 2010
Im using suse 11.1 with /home on a separate partition. To move my /home to a larger partition it looked easy to use Yast partitioner. I copied all /home/ files first to the new partition and backed-up fstab.
with Yast I unmounted /dev/sdb6 = /home and mounted it to /local
then unmounted /dev/sda4 = mynewhomepartition and mounted it to /home
checking the new fstab it looked fine but after a restart it did not work and I got an error. resetting the original fstab resetted the system as it used to be. My question is: why does it not work, are there (hidden) files with the old or other settings?.
View 4 Replies
View Related
Aug 25, 2010
Ages ago I installed Linux on a "spare" 40GB disk and I don't remember how, but that disk is where I still boot the computer from, in Bios it's listed as a primary master and HD0.
Over the time my installs moved to the "main" disk where it is now Suse 11.3 alongside Windows.
I want to get rid of that original "spare" disk altogether, physically take it out, but don't know how to move the bootloader to the "main" one.
I'm confused by all the options offered in Yast Boot Loader Location menu.
Can I just tell it to put itself into a custom boot partition and point it to dev/sdb, the current designation of the "main" disk?
Would I need to edit Grub as well? I figure the current "sdb" would be called "sda" after I take the old disk out. Would it be safe to simply rename /sdb entries, things like /sdb4 to /sda4 and so on?
Additional question - I used to play with Win7 demo, deleted that now, but its loader still pops up when I boot into Windows with their "earlier version of operating system" menu. Their offered solution is to run "mbrfix" from a WinXp recovery CD.
My question - what would that mbrfix do to the Linux bootloader and how can I get it to point back to to Grub afterwards?
View 9 Replies
View Related
Jan 6, 2011
During install process I assigned only 6GB for my root partition and now I'm almost running out of space. I have 11.1 installed and I wanted to update to 11.3 but there are problems with i855 video card with newest distro versions so I won't install it. Since everything is installed and configured I don't want to install 11.1 again.
View 6 Replies
View Related
Feb 23, 2010
I am an experienced Linux admin and have been using SuSE for many years. My development machine has had every version of SuSE since '02 and although it is a little old, is in good working order. (AMD
2400, 2 gig RAM, 160 Gig IDE disks - SuSE on disk 2) (OpenSuSE 11.1 with the latest kernel works perfectly. This install is on a spare HDD prior to doing a full install on my usual HDD.)
When I try to install SuSE 11.2 from DVD, the load kernel operation hangs at 97% (using both normal and safe kernel), however, I can install from live CD without any problem. I have tried the same DVD on a few "older" machines and had the same problem. I initially thought it was the actual DVD but re-burning has the same problem. I have also tried another DVD writer - same problem.
View 1 Replies
View Related
May 10, 2010
How would I go about moving a separate home partition back to /, and be able to delete the /home partition? I'm assuming I would have to copy the contents of /home to the root partition, and change fstab at the very least.
View 6 Replies
View Related
Aug 13, 2011
I am runnig WinXP and OpenSUSE 11.4 on dual boot.Generaly i am using SUSE, XP only for UpNP Media Center(server) to watch movies stored on my computer on TV via STB.For this i am using TVersity for wich i not found yet Linux alternative - or better say - i found it but is too heavy for my PC(P4 1.6 Mhz, 768 MB RAM, an dinosaur from Nvidia Vanta with 64 MB RAM)But this is not a part of my question.My question is how to transfer(copy, move...?) files from SUSE to WinXP?A large files like avi, mkv, mostly movies.I solved this to copy them on USB and then from USB to Win.This is a very slow proces because my PC have only USB 1.0And before asked me - all files are legaly downloaded from paysites.From SUSE, partitions(disks), folders and files under WinXP are visible but is not possible to copy files on them - acces is denied.Is there any way to do this?Suse is insatlled on LVM - /root/home/swapI am interesting ONLY to copy files from SUSE to Win, not at al from Win to SUSE.Code:
Directory: /home/janez
Sun Aug 14 07:53:26 CEST 2011
janez@linux-cia6:~> su - root
[code]...
View 5 Replies
View Related
Jan 25, 2010
I have been using ubuntu for a good time and now i want to install opensuse.I have dwnlded the new (11.2) version 2 times but on installing it says unable to create repository. it takes a full day to dwnld here.. please suggest how to use the existing dwnld or a way toget a correct dwnld. i think the earlier one is corrupt.
View 9 Replies
View Related
Sep 24, 2010
install suse 11.3 and it starts up fine. When i get to the page that has the license and it has the buttons on the bottom. I cannot get the screen to move over to the left far enough to see the button "next" I have a little exprience with installation of different distros
View 3 Replies
View Related
Jul 16, 2010
In the revision for the driver information it says it's for Ubuntu, but I assume it will work here as well.
Release date = 2010-05-07
Operating system release = Ubuntu 8.10/ubuntu9.04/ubuntu9.10/ubuntu10.04/moblin2/android-x86_090916
Kernel version = 2.6.28/2.6.30/2.6.31/2.6.32/2.6.33/2.6.34
Release driver version = 0017.0507.2010
Change history =
1. update firmware.
2. link NO-QOS-11N-AP use N mdoe.
3. Close LED when ifconfig wlan0 down.
4. Fix RTL8192SE WRT300N TP low issue.
5. To make LED dim time short enough when power save open.
6. Remove ubuntu10.04 self rtl8192se driver in make install.
In the supplied information from Realtek it tells me to:
========================================================================================
II. Compile & Installation & uninstall
========================================================================================
You can enter top-level directory of driver and execute follwing command to Compile, Installation, or uninstall the driver:
0. Change to Super User[code].....
When I do this the Make command is not correct for openSUSE
View 9 Replies
View Related
