OpenSUSE Hardware :: Install 11.4 Video Unreadable Except For Safe Mode ?
Mar 30, 2011
My old desktop had a power supply that was going bad, so instead of replacing it again I decided to buy a new PC Desktop. So I ordered from TigerDirect.com and got a grodd AMD computer without a operating system on it as I didn't want that Windows 7 scheisse on it. So I downloaded SuSe 11.4 64 bit, and installed it last night.
At this point I will tell you the new PC has an NVIDIA GeForce 61100 GPU for graphics with 128 mb memory. Also I use an HP W2007 wide display monitor running 1680 by 1050 resolution, that I got over 3 years ago when I was running SuSe 10.2.
So during installation last night of 11.4 when it did the first boot after install, is when I first saw the symptom which is an illegible white screen, with about 100 3 mm lines on it. So I shut down, rebooted and brought it up safe mode and all is fine. The error screen only appears if I boot GRUB with the Desktop or Xen option and only when the boot would switch to display my desktop.
I recall a similar illegible video monitor issue when I first got the display over 3 years ago, and fixed it by changing a SuSe video configuration option, but being I am getting old and I didn't write down what the configuration file was I am at a loss. All my previous SuSe installations never had a problem as I would always choose the Update rather than new install option thus that configuration file was brought across the many releases installations. This video configuration parameter had the monitor resolution sizes in it.
Just did a new install of 11.4 over top of my 11.3 and when I reboot into the OS it seems to boot just fine but the video is unreadable. When I boot into the failsafe the screen has a lot of gitter and the monitor tells me it's not in preferred mode of 1680x1050 at 60hz. All resolutions higher than 1280x1024 are unreadable. Tried booting nomodeset as I've read previous ... no luck. I'm still learning linux.
I got the blank screen when trying to install openSUSE 11.3 x64, so I was able to successfully install by choosing: Kernel (F6) > Safe Mode
Now I am trying to build my wireless driver, and I also notice that my touchpad is not scrolling. I had this OS installed in Windows 7 through VirtualBox before doing the clean installation, and I remember the touchpad scrolling.
I am thinking that by choosing Kernel Safe Mode to install openSUSE, that it did not install all the repositories, and it is why I am running into some difficulty.
what I need to do to fix my installation as if I had not installed in Safe Mode.
A little while ago i bought a magazine with the openSUSE 11.1 distro on it but couldn't install it so i gave up. I am attempting to have another go. The problem is that the os will work fine when booted from CD in fail safe mode and can be installed from there but when out of fail safe mode the system begins to boot but freezes and will do nothing more.
While booting SUSE 11.1 64-bit I get these messages:
Code: Probing EDD (edd off to disable) Undefined video mode 346 Press Enter to see video modes available And then a 30-second wait.
Is it advisable to set edd off? If so, how?
Would that get rid of the 30-second wait?
The video card (NVidia GeForce 6150 LE) and the monitor (ViewSonic VA2216W-4) seem to work fine with SUSE, so I don't understand the "Undefined video mode" message.
Having said that, I've seen much better text-rendering than, for instance, this messageboard. See attached image. Could that be a card/monitor problem? It looks better in Vista with the same hardware. So does Firefox in general.
I have updated my kernel to 2.6.27.48-0.2. Everything is fine, but when the system boots, it askes for a video mode, which I need to specify manually. The video mode is: 1280x768x32 Vega. This works well, but I want to edit the configfile in order to avoid manually setting the mode in each booting occasion.
My question is which file I need to edit. I have tried to add the note: vga=1280x768x32 Vega to the kernel option when booting. the system always asks for manual setting of the video mode.
how do I make grub boot to allow me to choose, like safe mode and normal mode and all that second, how do I do automated back ups (preferably using file copy) for something like every sunday at 11:00 am using the command line, i use to know but forgot.
I attempted to install Catalyst 10.11 for my ATI HD 2600XT and the system now only displays lines and a large block of pixels where the mouse would go. CTRL-ALT-F1 kills the system and does not provide a command prompt. This is a single installation, not dual-boot, but there is no Press Esc to access the Grub menu during startup so I cannot choose safe mode. I attempted to get into Recovery mode using the flash drive that I used to install the system and it tells me there is no Recovery kernel (I used the 64-bit Desktop installer, not alternative). Does anyone know an alternative to get into the Grub menu other than ESC during bootup? Alternatively, do I need to download the 64-bit Alternative ISO and create a new boot disk with it so I can access Recovery mode? Is there something else I'm not thinking of?
When I try to load Ubuntu (recovery mode) or if I press Ctrl+Alt+F1, the image gets corrupted showing a white screen with black writing on it, but which is unreadable. Also the words seem to be spelled backwards. I'm trying to install an NVIDIA driver and I need to stop first the X server.
I'm getting a weird charset problem in a chroot'ed system that I kexec'ed into. It is especially noticeable in ncurses programs like aptitude, but it also noticeable in vim. [URL] My locales are configured to en_US.UTF-8, I have choosen my keyboard layout with kbd-config while in the chroot before kexec'ing into it, I've passed the bootkbd= parameter to the kexec'ed kernel, and my TERM variable is set to "linux". I can't try xterm because this chroot system doesn't has X.
EDIT: I just noticed that the keyboard layout I selected is not working properly. All keys work fine except the ones that are specific to my country. Instead of รง I get a weird symbol.
I played with the graphics in kde4 and seem to have losy my installation. i have tried the rescue system option, recover system options and in desperation (i was just about to reinstall) tried booting in failsafe mode, and it worked!
where do i go to find out what the problem is regarding the normal boot mode? i think my pc is starting to resent the continual use of the reset button!
First let me say sorry if this is in the wrong thread. I am a bit of a noob when it comes to linux. I was trying to figure out how to get an external monitor as my primary monitor on my laptop when i made a change that cause the desktop environment to keep logging me out. I got it into safe mode and resolved the issue but i have my account set to not ask for a password on login and it keeps booting to safe mode now. I have tried logging out and typing my username to get the option to select the normal desktop but as soon as i enter my username it boots bake in as safe mode. The option to require a password on login is not working in this mode. Anyone know how I can get this corrected?
I have UBUNTU 11:04 and prefer the display given by " SAFE MODE" - is there a way that I can lock to ensure that Ubuntu always boots up in safe Mode.Save me having to remember to change the preferences every time I reboot. Alternatively can I change the display to be equal to that given in Safe Mode.
I'm using OS11.3 64bits with KDE 4.6.1 and its working fine.
Would anyone recommend me to do an upgrade to 11.4 or wait? If 11.4 is good, then would anyone recommend me to do a network upgrade, or clean installation?
Whenever I play a video via vlc or kaffeine and I switch to full screen I get lag. If I move my mouse to show the controls it plays perfectly. How can I fix my full screen playback issues?
On my friend's fedora 13 install, firefox was working, it seems, until the recent kernel update (kernel is now 2.6.33.6-147.fc13.i686).
After the upgrade, opening firefox would crash the system shortly after starting, so firefox was re-installed (once using rpm, once using yum).
After a re-install of firefox (using yum: firefox version is now 3.6.7) and Until a reboot, the repeated error report went something like this:
After checking to see if the flash plugin was still around and then doing a hard re-boot, however, just opening firefox immediately freezes the system.
Konqueror will run (albeit rather lamely)
In that I don't know the schedule for f13 kernel updates, if indeed the new kernel is causing this problem, does f13 save old kernels? How do I get the older kernel to start (with fc9 the option could be set in grub, or I could startx from a terminal but I have not been keeping up and am not sure how to do this.
I upgraded my video card today on my dual booting windows 7 ult. x64 machine. I tried to go into safe mode to clean the old drivers out with Driver Sweeper, but when I boot I get a menu asking me which disk I want to boot from (Asus motherboard P5Q <green>) and I have gotten this before and I usuall just hit esc to use default drive and start pressing F8 repeatedly but it just goes to GRUB dual boot menu and there's no safe mode for windows listed. I also tried pressing F5 as that used to be the safe mode command, but it does nothing and goes straight to GRUB.
When I first started to install Ubuntu to my system, I got an error that told me Ubuntu was not successfully installed, so I restarted my computer and tried again. That time it works, and I'm thoroughly enjoying the OS. I noticed that when I start up my computer and I have the OS boot list, Ubuntu and Ubuntu safe mode are listed twice. How do I remove the 2nd one, and is it still installed on my other partition even though it said failed?
I have the Lightning and Enigmail extensions added, and Thunderbird won't launch with these extensions unless I first open a terminal and give a "thunderbird --safe-mode", wait for Thunderbird to launch in safe mode, quit Thunderbird, then relaunch Thunderbird normally,
I looked at Thunderbird's man page, and was unable to find a debug mode; does anyone know if Thunderbird has a debug mode?
I am running Ubuntu 10.04 Lucid Lynx, Thunderbird 3.1.1, Lightning 1.0b2 and Enigmail 1.1.2.
(Note that, on a different computer, I am running Kubuntu 10.04, same versions of Thunderbird, Lightning, and Enigmail, and have no problems. Also, on a third computer, I am running Linux Mint 9 Isadora, same versions of Thunderbird, Lightning, and Enigmail, and also have no problems.)
I did a clean install of 10.10 on my Asus A6R laptop today. Previously i had 10.04 on it.
After installation and the first reboot my GNOME won't start in normal session. If I select Ubuntu Desktop Edition (safe mode) everything works fine, but on the normal Ubuntu Desktop Edition session, GNOME just won't start. I have a mouse cursor that i can move around and a normal background. Also i can hear the usual startup sound.
I really need to open Firefox in Safe Mode as I have installed foxyproxy and it's gone wrong! and it won't let firefox open, so i need to open it in safe mode, how would i go about doing that?
I am running Ubuntu 10.10 64 bit and I did some Update Manager system updates yesterday evening without paying to much attention at the process. This morning when I started my computer, it froze during boot and my Ubuntu is not working anymore. I managed to start it in "Safe Mode" and checked the kernel version which is 2.6.35-24-generic . In System > About Ubuntu it says that I am using Ubuntu 11.04 - the Natty Narwhal - released in April 2011 and supported until October 2012 even though I am sure I didn't do any dist. upgrade.
I'm kind of new to Ubuntu. Anyways did a fresh install over windows, would crash with this pixilated purple screen. So I tried "safe graphics mode" and it worked. But now that it is installed, how do I get out of it and have it run normally?
Edit: tried to manually install the nvidia drivers, restarted comp and now it wont boot in. Stuck on a black screen and it says "gpu lockup - switching to software fbcon".
After I upgraded to 11.04 I now can only boot in safe mode. When I boot up in regular mode everything on the desktop is showing but I cant open anything. When I try to boot up in the classic mode, which is what I prefer, I just get my wallpaper on my desktop but no icons or anything. I didn't mind the safe mode at first but I now realise I cant install any updates which isn't good. I have 222 updates that need installed.
I just received a band new DELL laptop with a blank disk and installed Kubuntu Lucid Alternate 64 on it. No problem during install (the only option I specified was for an encrypted LVM), but when I try to boot all I can see are colored lines scrolling/blinking on the screen. If I press any key it changes to white text (unreadable) scrolling/blinking.
If I press a key during the boot and get into grub, I cannot edit the boot options, cannot go to command line, cannot use MemTest86 (maybe because the partition is encrypted). Booting with the recovery mode shows the same lines. Edit: if I try to boot with the standard LiveCD, I get the same mess, so it's abviously a video card problem. Damn, I had checked beforehand that Ubuntu could run smoothly on it.
