OpenSUSE Install :: How To Adjust Safe Settings To Not Get Prompted With Every Single Click

Dec 1, 2009

I want to use secure file permissions within OpenSUSE, but having to provide the root password for every window I click is just a little too much.Wonder what the setting "paranoid" does then. And I also wonder how to adjust the safe settings to not get prompted with every single click.

View 9 Replies


ADVERTISEMENT

OpenSUSE :: Mouse Model Does Not Support To Change The Single Click Into A Double Click In 11.1

Jan 14, 2009

where can I change the single click into a double click (because I'm a windows user (sorry!))? The mouse model does not support this.

View 4 Replies View Related

OpenSUSE Install :: Xinerama Config - Adjust Xinerama To Place 1 Desktop On Each Of 2 Monitors And Not Stretch A Single Over Both

Jan 10, 2010

I would like to adjust Xinerama to place 1 desktop on each of my 2 monitors and not stretch a single over both. With the current set up there is a problem with window placement upon opening new widows or context dialog boxes. I realize that I could adjust placement properties and select window placement with the mouse but this is still lacking in productivity. My monitors are not next to on another so this is more of a problem than it seems.

View 4 Replies View Related

OpenSUSE :: Adjust Click Time Response

Mar 8, 2010

how do you adjust the response time of the taskbar menus, such as when you click on the start button on the bottom left of the desktop? My problem is that when I click them, it would delay for about 1 second before popping up the menu. But right-clicking on the desktop popped out fine without any delay though. Is this normal? Where do I adjust the settings for this? I have configured my ATI graphics card succesfully. Direct rendering, desktop animation and everything else is working fine btw.

View 4 Replies View Related

Slackware :: Configure Mouse Click Interval Since A Single Click Is Recognized As Double Click?

Apr 29, 2010

I try to configure mouse click interval since a single click is recognized as double click by doing it from KDE mouse configuration in system settings; but my attempt doesn't work even (I set the click interval to 2 sec, but doesn't change anything). What is the best way to do this in slackware?

View 4 Replies View Related

Ubuntu :: No Mouse Click Response When Prompted With Keyring

Jun 2, 2010

I've been using both for awhile and can usually figure out my own problems, but I'm having issues with this one. I recently updated to the most recent version of Ubuntu. Before the update, everything was fine. But the first time I loaded my computer up after the restart for the update to come into effect I was hit with a problem. When the system loads up and logs in I'm met with a prompt asking me to "enter password for keyring 'default' to unlock." That is nothing new, I've always had that come up, but for some reason now when that appears I can't type in my password or click on anything whatsoever. I have control over my cursor and can move it by moving my mouse, but when attempting to click cancel, ok, or the password box or anything else there is no response. Because I can't get passed this prompt, I obviously cannot do anything on my computer.

View 1 Replies View Related

Software :: OpenSUSE 11.4 - Mouse Single Click Enabled?

Apr 20, 2011

Does anyone know where single click for mouse can be enabled in this distro?

View 7 Replies View Related

General :: Mouse Single-click Equals Double-click - Can't Select The Entire URL By Clicking

Apr 13, 2011

when i click my mouse on something, it sometimes registers as two clicks. it doesn't happen all the time, but frequently enough to be annoying. for example, when i click a videos video to pause it, it often opens into fullscreen (which you normally click twice to do). also, in the url bar of chromium, i can't select the entire url by clicking. i now need to use ctrl+a. that's also because when i try to select the url, the highlight randomly disappears.

if i have multiple windows open, my click on the first "x" of the top-most window also closes the next window. i'm on linux mint 10. it's not really important, but it drives me crazy sometimes when my mouse doesn't work the way i want it to.

View 3 Replies View Related

Ubuntu :: Single Mouse Click Registering As Double Click?

Mar 13, 2010

About a week ago I installed some updates. What they were I don't remember. After I did that my mouse started acting up. Now about half the time when I single click it registers as a double click. Also when I click and drag to select text anywhere it'll randomly do another click screwing up that process.

So far I think the problem is when I press the left mouse button it registers the left click and then when I release, it randomly registers another left click.

The mouse itself works fine if I take it to another PC that's using windows.

OS: Ubuntu 9.10 64bit
Mouse: Microsoft Intellimouse 3.0

View 9 Replies View Related

Ubuntu :: Make The Mouse Single Click Instead Of Double Click?

Feb 4, 2011

mouse menu different in 10.10, is there a way to make the mouse single click instead of double click?

View 2 Replies View Related

Hardware :: Single Mouse Click Acts As A Double Click

Aug 18, 2010

Code:
linux-uitj:/home/anisha # uname -a && cat /etc/*release
Linux linux-uitj 2.6.31.5-0.1-desktop #1 SMP PREEMPT 2009-10-26 15:49:03 +0100 x86_64 x86_64 x86_64 GNU/Linux
openSUSE 11.2 (x86_64)
VERSION = 11.2

If I normally click the Trash icon either in Kmail or in Evolution more than one mail gets deleted in a sequential order! I have to press the click button extremely light to avoid this problem. I have confirmed this problem is not only with the Email clients but even with most other normal applications too. I have changed my mouse twice but the problem persists. Both were USB mice. Below I have provided log information :

Code:
linux-uitj:/home/anisha # dmesg | grep usb
[ 0.138267] usbcore: registered new interface driver usbfs
[ 0.138267] usbcore: registered new interface driver hub
[ 0.138267] usbcore: registered new device driver usb
[ 0.396952] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.396956] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.396958] usb usb1: Product: EHCI Host Controller
[Code]....

View 9 Replies View Related

Slackware :: Single Left Click Picked Up Sometimes As Double Click?

Jun 13, 2011

For some reason now when I left click slackware sees it sometimes (4 out of 5 times) as a double click. This is very frustrating? Here is a list of ps aux

Code:
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 1 0.1 0.0 824 276 ? Ss 12:39 0:01 init [4]

[code]...

View 11 Replies View Related

OpenSUSE :: LXDE, Single Mouse Click In Place Of Double?

May 6, 2011

Just a minor frustration, I have not found how to do this, double clicking serves what purpose? Am I going to change my mind between clicks?

View 2 Replies View Related

Ubuntu :: Changing The Double Click To A Single Click In 10.04

Aug 9, 2010

Ubuntu 10.04 LTS has no immediately apparent way that I can see for changing the mouse behavior from the default double-click to single-click. There appears to be some type of kludgy, but unsatisfactory fix for this unwanted behavior in the Accessibility-option, under Mouse-Preferences.

View 5 Replies View Related

Ubuntu Security :: Encrypt With Right Click Safe?

Jul 13, 2011

I just found a neat way to encrypt a file in Ubuntu 10.04.

I right click on a file and select the Encrypt option. The program prompts me to "Choose Recipient" so I choose myself on the list. Then it prompts me to enter my passphrase.

Once all that's done I hit enter and it adds .pgp to the end of whatever file just encrypted. The same basic method is used to Sign the file.

Does it sound as though what I said is correct and that the file I wanted to encrypt was indeed encrypted?

Can anyone crack my files without the passphrase? I'm sure it depends on the complexity and length of the passphrase.

View 6 Replies View Related

Ubuntu Multimedia :: How To Adjust Webcam Settings

Apr 1, 2011

I am using 10.10 and am searching for a program to adjust the settings on my webcam. I am using webcamd to upload pictures to a weathercam. I can use Cheese for viewing the output but the adjustments made there don't stick when I close Cheese.

It appears there used to be a package called gqcam which may have done the trick, but I can't find it in the repositories anymore. There is a current tar.gz package available but I'm hesitant to use it since I don't know why it was removed from the repositories. Does it conflict with the recent video changes in Ubuntu and what conflicts could it cause now or when I attempt to upgrade?

Heres my question: Is there a program available for Ubuntu which will allow me to adjust the settings of my webcam or is gqcam still compatible with Ubuntu? Bonus points for a .deb package.

View 4 Replies View Related

Ubuntu :: Can't Adjust The Settings And On The Web DansG Is Not Filtering

Apr 19, 2011

I have a dell inspiron 600m with xubuntu 10.10 installed, I have it for a kids computer so I installed web content filtering (dansgaurdian) and I installed simple module for admin. dansgaurdian's control files (libdansgaurdian-perl) I instilled both from the USC. But I can't find where I can ajust the settings and on the web dansG is not filtering. how to find the gui part of it?

View 3 Replies View Related

OpenSUSE Install :: How To Adjust The Screen Resolution

Jul 17, 2010

Suffering from the expected error in detecting my video properly when installed 11.3.Have intel 915G onboard video. Up until 11.1 Opensuse struggled with loading this correctly. in 11.1 & 11.2 all was well. A couple of minor tweaks in sax2 and it worked perfectly. Now hat sax2 has gone I'm not sure how to make these minor tweaks.

My problem is I have been forced to a screen resolution of 1024X768 VGA Following the readme file adding nomodeset at boot fixes the problem but of course forces me back to an old video driver with pretty poor performance. Is there any way I can change the screen resolution and set the correct monitor - any GUI replacement for sax2? Krandrtray will only let me set a max res of 1024x768. I need to set res to 1280x1024

View 2 Replies View Related

OpenSUSE Install :: Saving System Settings (yast Settings)

Apr 1, 2011

Is there a way I can save system settings and have yast revert to a config file in case I ever need to reinstall the system again? I hate having to configure the firewall, runlevels, samba shares, samba workgroup, apparmor, and all the other junk after every install. It's not like I install often, but should suse 11.5 or 12 roll out, I'd like it to be a snappy upgrade.

View 6 Replies View Related

General :: Adjust Resolution Or Video Settings From Command Line?

Feb 28, 2011

I'm trying to install Ubuntu Desktop 10.10 on an Intel Atom mainboard (Intel D945GCLF2) with CRT that has been running Ubuntu 9.x previously.
Both, Desktop live CD / installer and alternate install CD cause the screen to go black (and the status LED blinks).

I was able to get a bit further into the boot process with nomodeset as parameter with the Live CD, unfortunately I can't pass GRUB any parameters now that I have used the alternate Install CD by pressing 'e', it just boots.

So now I have Ubuntu installed, I get a terminal with CTRL-ALT-F1 but I don't know what I need to do now or how to adjust resolution or video settings from command line.

View 1 Replies View Related

OpenSUSE Install :: Adjust Notification Appearance Time?

Jan 13, 2011

where the time to display media notifications is stored? When I put a CD or DVD into the player slot, a popup window shows possible actions to take but these old eyes can't read it fast enough to get through the list. Is it possible to get it to display longer and if so how?

When I put an audio CD in the slot, the display says there are six (6) actions possible but I only have time enough to read the first 2 or 3.

View 2 Replies View Related

Ubuntu :: Unable To Find The Settings To Enable Or Adjust Compiz In Unity

Apr 15, 2011

I have been unable to find the settings to enable or adjust compiz in Unity. I am so used to Gnome that this is almost like starting over.

View 9 Replies View Related

General :: Unable To Change A NVIDIA Control Panel To Adjust My RGB Settings

Jan 23, 2011

In a previous version of UBUNTU I was able to enter a NVIDIA control panel to adjust my RGB settings. Now I'd like to change it slightly but there doesn't seem to be a NVIDIA control panel. There used to be two of them. After installing the video driver, If I tried to go into UBUNTU video settings I would get a console message stating I now need to use NVIDIA control panel and would automatically open it for me.

View 1 Replies View Related

OpenSUSE Hardware :: Max Screen Resolution - Screen Goes Blank When Click On The Display Icon In System Settings

Jan 11, 2011

i have just put a Geforce 7300 GT graphic card into my machine the problem is the max resolution I can get is 1024x768 at 60 hz the screen is a benq fp71g+. also the screen goes blank when i click on the display icon in system settings. i know that the screen can be run at 1280x1024 so I don?t know where the problem is.

View 3 Replies View Related

OpenSUSE Install :: 11.3: Where To Adjust X11 Timeout Parameter Affecting Boot

Mar 13, 2011

Computer boots up fine, but drops to commandline as it tries to go to the desktop. Just logging in and issuing "startx" brings up the desktop and all is well.

The Xorg logfile gives no fatals or clues (at least to me), but the "warn" file in /var/log gives the following at the end:

Mar 13 13:25:43 xxxxxxxx kdm[2328]: X server startup timeout, terminating
Mar 13 13:25:43 xxxxxxxx kdm[2328]: X server for display :0 can't be started, session disabled

Yesterday was fine, and never had it before; no harware changes (still same ATI 4770 and ATI 11.2 driver), nor BIOS changes/updates, for ages. First boot today this started. Does it continuously.

how I might slightly increase X's timeout parameter a bit, if this is the problem?

View 9 Replies View Related

Ubuntu Networking :: Iwconfig Txpower Settings - Make Changes Permanent Or Adjust Default Value?

Feb 24, 2010

I'm having some difficulty setting my txpower setting on my atheros wifi card. I am using ath_pci driver on ubuntu 8.1 64 bit. I can set the txpower to whatever, 12dBm for example, it accepts the change but quickly reverts back to a default value of 8dBm. Power saving is off. How can I make these changes permanent, or adjust the default value?

View 2 Replies View Related

OpenSUSE Install :: Safe To Upgrade To 11.4?

Mar 15, 2011

I'm using OS11.3 64bits with KDE 4.6.1 and its working fine.

Would anyone recommend me to do an upgrade to 11.4 or wait? If 11.4 is good, then would anyone recommend me to do a network upgrade, or clean installation?

View 2 Replies View Related

OpenSUSE Install :: 11.2 Touchpad - Starts Scrolling Unexpectedly After Adjust Speed

Feb 16, 2010

I am having a problem with my touch-pad on my Dell Inspiron 1525. It needs to be adjusted for speed and it starts scrolling unexpectedly. I understand I need to install a driver for it but don't know how. The problem I see with Linux is that it's not easy to install software for new users. I have ran into a few One click Installs and managed to work them out quite easily. Usually the documentation you find online to install programs assumes the end user knows how to install.I need to know how to install the touch-pad driver from start to finish and all steps in between.

View 2 Replies View Related

OpenSUSE Install :: Installationen Freezes The Moment When The Setup Comes To Adjust The Timezone?

Aug 18, 2010

The installationen freezes the moment when the Setup comes to Adjust the Timezone.I have already tried all other Installoptions (Secure Kernel, without APCI/ACPI), no difference.I tried the Install-DVD on another Computer (on which i dont want to use Linux) and it didnt crash at this Installationstep, so the dvd seems to be ok.My System is a AMD Athlon XP 1700+, 256MB RAM, which should be ok for Minimum system requirements

View 4 Replies View Related

Debian Configuration :: Service Settings Safe To Turn Off?

May 12, 2010

My system goes through slow periods where it just crawls and others where it's fine, but I'm wondering which service settings are OK to just shut off to give me a bit more oomph when I boot up.The others I'm pretty OK with like spam assassin, dictionary server and so on, but some of the others i wonder if they only serve to slow things down..Also..I live in a very dusty environment and I KNOW the fans and other parts get caked with dust and it wouldn't surprise me if the dust got so bad it just stops the fans completely so once in a while I use my air compressor to blow the crud out and I usually get covered myself, but how safe is using the compressor? It's not the type that typically fills up with condensed water droplets so that isn't a super critical issue..It's a small 1 hp deal, elect drive and so on.. Safe enough? It's all I have and/or can afford..

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved