OpenSUSE Install :: Move /home To Another Partition With Yast?
Jul 18, 2010
Im using suse 11.1 with /home on a separate partition. To move my /home to a larger partition it looked easy to use Yast partitioner. I copied all /home/ files first to the new partition and backed-up fstab.
with Yast I unmounted /dev/sdb6 = /home and mounted it to /local
then unmounted /dev/sda4 = mynewhomepartition and mounted it to /home
checking the new fstab it looked fine but after a restart it did not work and I got an error. resetting the original fstab resetted the system as it used to be. My question is: why does it not work, are there (hidden) files with the old or other settings?.
How would I go about moving a separate home partition back to /, and be able to delete the /home partition? I'm assuming I would have to copy the contents of /home to the root partition, and change fstab at the very least.
Trying to clean install 11.2 dual boot with Win xp already installed. How do I create a new home partition, don't want to preserve the existing home partition from a previous attempt. DVD installation and automatic config keeps saving the thing.
Been digging around and not finding anything that quite works.
Background: I had an existing 10.10 install and 10.04 on another partition. When I installed the 10.04 I told it to use the existing /home partition which is also being used by the 10.10 install. All good, both users have directories with all their data in the same /home partition.
Issue: So, as the 10.04 was 32bit (experimenting but another story) I decided I would replace with 10.04 64bit. All went well except when I did the manual partitioning I screwed up and instead of setting the existing /home partition to 'use but don't format' - which I think is what I must have done last time - I left it as 'don't use and don't format'. So, obviously, now the new 10.04 install has its /home inside /, which I don't want. I want it on the existing /home partition as it was with the previous 10.04 install.
Question(s): Is there any simple(ish) way of doing this without a reinstall? Not a major problem as I have only just installed and can do it again without losing anything but time, but I would like to figure out a way to do it without if possible.I want to essentially move the /home/user directory (rather than the /home) and make it /media/home/user inside the existing partition. Seems easy enough on the surface but becomes involved as I investigate.Ubuntu 10.04 minimal install with Xfce DE.
I encrypted my home partition with the YaST Partitioner tool, but now I can't access it anymore. After I encrypted it I rebooted the machine and thought that it would prompt me a password field to access the partition, but now I can't access it at all. I tried "mount -t ext4 /dev/sda7 /home" which gives me that error after I entered the password: "mount: wrong fs type, bad option, bad superblock on /dev/sda7, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so"
The info I get from "dmesg | tail" is: "EXT4-fs (sda7): VFS: Can't find ext4 filesystem" Before I encrypted it I converted the /home partition from ext3 to ext4 without any problems and it worked properly. After playing around with it I also discovered that /dev/sda7 got wiped out of /etc/fstab, but I entered it again.
During install process I assigned only 6GB for my root partition and now I'm almost running out of space. I have 11.1 installed and I wanted to update to 11.3 but there are problems with i855 video card with newest distro versions so I won't install it. Since everything is installed and configured I don't want to install 11.1 again.
I created a partition in my hard disk for my data (documents, multimedia, etc.).How can I:Move the /home/ directory to the new partitionMake the OS (Ubuntu Linux) treat that directory as the default /home/.
How do you do this without breaking all the links and preferences in /home? Does the system take care of everything? Has anyone done it or is it actually system crippling?
There was a Toshiba Satellite notebook with XP I decided to install Fedora 13 in dual boot mode.So, I booted with Gparted and shrunk the ndows XP partition to just 24 GB.Then I set up partitions for Linux this way/boot, ext4 256 MB/, ext4 16 GB/home, ntfs 176 GBswap, 8 GBI intentionally left about 8 GB left just in caseThen I proceeded to install Fedora 13.I used the customized mode to use the already set up partitions and keep Windows XP.At the moment of setting the mounting points, fine with /boot, / and swap. But Anaconda wouldn't accept mounting point for /home.I went on anyway.Fedora got set up and run moothly.However, /home resided in / with only 10 GB left.And the /home partition could be seen as a separate disk with its 176 GB.This is /etc/fstab:
# # /etc/fstab # Created by anaconda on Sun Sep 5 05:46:26 2010
I want to move my home directory to a separate partition so I can install the new versions of Ubuntu without losing my data. And while I'm at it, what other important directories should I move to separate partitions? And how do I do it? I'm guessing that the /boot directory should also be moved to its own partition too, yes? Because it has the GRUB in it, and if I removed Ubuntu to make way for a newer version of Ubuntu, I'll just get an error because the computer can't find the GRUB that doesn't exist anymore, right? And also, if I move those important yet-to-be-listed directories to their own separate partitions, how large should those partitions be?
I don't want to miss out on the upcoming Lucid Lynx (If it will work in the first place, of course ) By the way, I have an Ubuntu-Windows XP dual-boot system. I'll attach a screenshot of my partition table from GPartEd. You can see that I have about 300 GB. The largest partition is Ubuntu.
What are the steps I must take to move my existing home folder to a separate, encrypted partition? Can I create this partition without damaging my current partition? Where is a trusted location to download App Armor profiles? What else can I do to harden the security of Ubuntu?
Gparted shows that my dual boot laptop has the following partitions: [URL] I want to create a partition and move the contents of my Home folder into it.
I've been trying to figure out how to move /home to the other partition that exists on my computer, however it's ntfs and turns out it's impossible to move my /home there. So how do convert that ntfs partition to ext3, I don't mind loosing data that's in that partition. [url] is the partition I'm talking about. So what's the best way to do it ? If you write what commands I should use please include partition names.
I have just spent dome time using gparted to sort out my partitions. I have a vista partition, a fedora one and a big chunk of unallocated space I wish to use as my data drive.
I want to move my ~ folder to the new partition and have windows/vista access the folder and write to the Documents, Downloads folders etc.
What is the best format to use?
Also I plan to start backing up my partitions to a server, for instance using g4l to save a linux image (maby a windose one too). Is there any benifit in keeping all the hidden files (ones starting with period '.') i.e moving the whole ~ folder or would I be best off leaving the ~ dir and moving the folders I know i use such as ~/Downloads, ~/Documents etc?
And how should i preform the move of all these files? 'mv'? do i need to add any special options?
I was looking to do a fresh install of 11.2 and use my home partition from 11.1. During the Gnome Live version I wanted to see how suse would configure my computer. It recognized everything fine, except it didn't show my current home partition which is ext 3. Because Opensuse 11.2 has switched to ext 4 as default for root and home? I was hoping to use my old home with 11.2. Is there any way to make the switch without losing my settings? During the live install the partitioner didn't use my current home partition, it was going to make a new one.
So I opened up the partitioner in yast to see why it didn't use my current home and it shows no mount point for my home ext 3. Would changing the mount point on my ext 3 partition to home make the 11.2 installer recognize this as my home to use? Or will I have to copy my current home. Paste it elsewhere. Delete old home. Use unallocated space as ext 4. Paste old home on new ext4 to have the 11.2 installer recognize this as my home. So, current home is ext 3. 11.2 installer wants to make a new home on ext4. How do I use my current home settings? I haven't installed yet just tried a live run.
I was recently forced to do a reinstall of OpenSUSE. As part of that I backed up the folders I needed to keep. The installation however didn't format the 'Home' partition though. At first I thought it was nice, but I've run into trouble with a program I most definately need to get working. So my plan is to re-install yet again.
how to make the install format the root partition I think it is, and the 'home' partition, so I can start fresh.
To further complicate things My laptop (which this is happening on) is dual booting between OpenSUSE and Windows 7. It is VERY important that the windows partitions remain.
When the installer gets to the point to set up the partitions it offers something like
sda1 / sda2 /swap sda3 /home
I'm not sure which option to take now. I assume I choose the option to edit the partitions but I'm not clear how to preserve the /home as it's now got a different partition number or does that no matter as long as I choose not to format it? Also, to replicate the original partition structure I'd need to delete the partitions and add them in the correct order but would that destroy the /home?I'm a bit confused with how it will work.
This is strange. I moved OS 11.1 from an old 150 GB PATA drive over to a 500 GB SATA using Parted Magic. The old and new partitions were
Code: OLD: /dev/sda1 - 19.99 GB, mounted as / (root partition) /dev/sda2 - 97.82 GB, mounted as /home /dev/sdb1 - 29.52 GB, Windows XP NEW: /dev/sda1 - 29.30 GB, mounted as / /dev/sda2 -292.97 GB, mounted as /home /dev/sda3 - 45.82 GB, Windows XP
I used the "Clonezilla" tool on the Parted Magic live CD to move and resize the partitions. To my delight, everything appeared to transfer just fine. I can boot into OpenSUSE 11.1 (though not into Windows, but that's not really important; I'll figure that out later), but my /home partition won't mount. I'm set to autologin, and I get the expected error: "can't access /home/stephen" (or something like that). Here's the weird thing. I can ALT-F3, get a terminal and manually "mount /dev/sda2 /home", go back to ATL-F7 and log right in, so I know the disk is fine. (I've already 'fsck'd everything, by the way, and they're clean.)
I've used Yast's partitioner about a dozen times, trying "device by ID" and other settings. I always get the same thing when I reboot. On this last reboot, when it refused to log into /home, I ALT-F3'd, logged in as root, did a "cat" on "/etc/fstab" and entered the device-by-id line exactly as I saw it there and it mounted the /home directory just fine! ALT-F7, logged into KDE. I'm typing this in KDE now. Works fine. I so rarely need to reboot this machine that I can manually mount the /home partition, if need be, but (obviously) I'd like it to be mounted automatically during the boot.
I don't see anything obviously wrong here. The fact that I can take that second line and do a manual "mount" shows me that the device ID is at least correct. Just to be clear, here's what I entered in virtual terminal 3 as root to get my home partition to mount: Code: mount /dev/disk/by-id/ata-Hitachi_HDP725050GLA360_GEA534RV0DJ4LA-part2 /home and it worked fine. Exact same line.
I'm trying a fresh install of 11.2 but I couldn't figure out how to make the whole installation on the same logical extended partition.
It always wants to create a separate /home partition.
I have a second HDD with NTFS only for backup purposes, but the installer puts a grub entry for it too (windows 2). And this HDD is not even bootable. I don't have the balls to try to boot from it and see what happens. How to get rid of it?
I have two partitions where I can install (e.g. versions of openSUSE). I have a Swap and a /home partition to be shared by both. Thus e.g., while still running 10.3, I could install and test 11.2. Once I switched over to 11.2, I still can use 10.3 when need arises (not done for monthes now). I have the 10.3 partition mounted, thus I can stilll see what was in /etc/.... on the 10.3 system from the 11.2 system if need arises.
I gave the file systemss on those two partitiions different labels to better keep them apart. It is in the first place up to you to design how you want to partition your disk(s) to facilitate such a feature. Has someone done a thing like this (especially sharing /home partition) with openSUSE and Ubuntu? Is there a How-To anywhere? Until now I have the /home folder of Ubuntu not on a separate partition but under the system/root partition "/" of Ubuntu.
I'm upgrading to 11.3 (from 11.2) and will be keeping my current home partition. Will this keep my browser favorites? Also, I read somewhere that in order for things to work properly after upgrading (without reformatting my /home partition) that I would have to keep the same username AND user UID...? Is that true? How do I make sure I have the same UID if so...?
I purposely set up a seperate home partition so that when I changed distro's or upgraded I would still have my files, and some settings intact. (I switched distros a lot when I first started using Linux.) I set up a "bin" folder (in home folder) that had a couple of programs I had downloaded to keep from having to set up and configure everything all over again every time I felt like changing distro's as well.
I mistakenly removed my /home of openSUSE while trying to install another distro. My root pertition is OK. openSUSE is shown in grub. but i cannot boot into it as there is no /home is there any way to fix this without removing my openSUSE?
First off I'm new to the openSUSE community and would just like to say So, to the issue at hand. I recently switched to openSUSE 11.4 from Debian. I noticed the setup didn't have an option encrypt the home folder like it does in Debian, so not being aware of any other way to encrypt it, I created a new partition, backed up my current home directory, created a new partition and mounted it as home before copying in the contents of the backup to the encrypted home partition I created. Now of course it is askingme to put the crypto password in at each boot, which isn't ideal because it's a family machine and no-one would remember the password but me. Is there any way of being able to automount the encrypted partition without having to put the key in every time? Or better yet an encrypted home folder that doesn't require the key to be put in on each login (as in Debian) without even using a dedicated partition.
want to install 11.2 version. my machine config is as belows. pentium 4 with 1.8 gz, 512 ram and 15 gb hard disk. i want to know what should be the partition size specially for swap, root ,home etc.and what version i.e genome or kde should i install.
I just installed suse 11.3 on formatted partitions (5GB swap, 30GB / and 500GB /home). Just after the installation, My computer showed 25.2GB of /home to be used. When I do:
Code: dyn-0a2a1f40:/ # df -h .....
That seem to be roughly correct because since yesterday I've been running a program that constantly writes logs and other data files and plots, which might have accumulated a few GB's. It is also collaborated by the output of
Code: dyn-0a2a1f40:/ # du -sk /home 10548452 /home
I'm not hard-up on space right now but storage has been dear until the recent past. Also out of curiosity, the size of the /home partition is shown as 493 instead of the 500GB allocated while the swap also lists only 4GB instead of 5GB. Below is the output for fdisk -l in case anyone needs it:
When I loaded opensuse 11.3 for the first time, I used the automatic partitioner and have been loading app's onto my ~8GB boot partition, and now that it's full, I have ~15 GB free on my home partition and need to install a few more app's to get my laptop fully functional. Is there a way (other than copying the boot partition to the home partition and then repartitioning, copying again to the repartitioned drive, and then recopying again to the freed up space) to get the new app's I install to redirect to my home partition?
When running the umount command like this as superuser: umount /dev/sda8. get the following message:umount: /home: device is busy.(In some cases useful info about processes that usethe device is found by lsof(8) or fuser(1))
i have 2 harddrives. a 6gb and an 11gb. IDE ATA. i want to install opensuse 11.2 on them, using EXT4, in a different way this time. i want the "/" partition to cover all of the 6gb, with the drive set to master. For the slave, I want the "/home" partition on the 11gb, covering only 10gb on the beginning of the drive, and i want the swap space partition on the end of the drive using 1gb. Is this a smart way to install it? Will i have to continuously mount the drive with home and swap on it? What is the best configuration for using these two drives?
When using the Yast partitioner to partition a USB stick, I noticed there was no option for the ntfs format, but has the fat option. Is this a missing functionality/lib or by design? I have all of the ntfs stuff installed. I used to use gparted for this, but decided to make my self use the Yast tools. I like to keep them in ntfs format to get around the 4GB data transfer limit and have them readable by Linux and Windows.
