how certain packages such as glib, yast2, etc. are part of "Online update" i.e. new versions show up there, whereas certain packages are not (e.g. NVIDIA drivers). Is it a setting on the repository, the package, or does the new version need to be labelled specifically?
View 3 RepliesSince applying a number of updates using the online update tool in Yast, the online update tool can no longer contact the software repositories which were configured in Yast.If i browse to the URL which is configured within the software repo config tool, I can see the updates & folders fine in Firefox.Zypper seems to do the same thing & just sits there if I do zypper update.I see a number of other people in this forum have had the same problems, any ideas as I couldn?t find a resolution?
View 1 Replies View Relatedwhen I launch Yast2 - Online Update, I get an error during the repository refresh that it could refresh the repository.Since it's easier to copy-paste - here is the output from 'zypper ref' with the same error:
Code:
Retrieving repository 'Updates for openSUSE 11.3 11.3-1.82' metadata [|]
Failed to download ./repodata/cefcc9d56264aa169f70a53c560ffc39cb6af575-deltainfo.xml.gz
from http://download.opensuse.org/update/11.3/
A[code]...
the normal auto updater ran and installed a new kernel for security vulnerability and it was a .pae version. So after restart I now have 4 options on the boot screen, which includes the normal "SUSE" and a 'SUSE pae" version. defaulted to the new pae version and booted up. I got the video definition not found and had to enter a value manually. The system comes up but not into x system. It gives me a login prompt and startx yields a "terminal not found." Ran SaX2 and startx now works. Unfortunately my KDE desktop is messed up now. There are none of the normal "taskbar" at boot up started processes there. So what should I have done? how do I get my system back to normal and roll out the new kernel and all these changes?
View 6 Replies View RelatedOn my work computer I installed Opensuse11.2 in VirtualBox. However online update or installs which are downloaded through YAST2 are not working. I get the message "Failed to download media ....." and that's it. I configured the proxy and when using the test proxy button it tells me that the proxy works OK. If I copy the link from yast into Firefox I get to the site of the repositories without problems only Yast cannot connect. Neither from the GUI nor from the console. I had no problems with Opensuse11.0 and previous versions. WHat is the problem?
View 7 Replies View RelatedI performed the online update which included a kernel upgrade. After restart I no longer get a working display. Otherwise appears to boot, as I can see the drive from my laptop via samba. I cannot get a display in either normal boot nor in failsafe. I am also not able to get a terminal screen.Grub boot includes VGA=0x31aAre there any other boot options I can enter to at least get to a terminal?
View 9 Replies View RelatedYast online update is installed, but no repositories were configured. On previous installations, they were.
Is this a known problem, and how can I pull in the full list?
I know I should be able to do an online update using cl zypper but would much prefer to use Yast's sw manager as it's easier to review and respond to package issues that always arise (because of packages made by me or dl'ed from obs but from repos not enabled in the repo manager)currently running 11.2
View 9 Replies View RelatedNot sure this is the right place and I feel really stupid for asking this but, I want to change the frequency of the online update checks but, for the life of me, cannot find out how. During install, I can configure it but I now want something different. I thought that there was a topic with yast under software but no. Only "online update" which basically give me manual update. I click on configure but same screen appears.
View 2 Replies View Relatedin the last few days, Kpackagekit, which I use to update my system (openSUSE 11.4) had some difficulties to
1. install updates for flashplugin, because whenever you accept the license, Kpackagekit closes, and starts from beginning = a never ending cycle is started
2. fetch updates from Packman. It always throws a message with connection timeout - in Zypper and YaST no such problem occurs
Thats why I have fiddled around in YaST online update and found a feature "automatic online update". For that you need an extra package yast-online-update-configuration. I installed it and configured it to do automatic Updates.
So now I have a question on how it works. Because I have some additional repos activated: KDE updated Apps, KDE extra and the KDE release 4.6 repo, which brings the most recent KDE updates for KDE 4.6.
These repos have priority 90 whereas all the other repos - Packman, OSS, Non-OSS, Contrib etc. have prio 99.
Will YaST install all the updates from KDE with this setup? I am asking, because when I did online updates in Yast before, with prio 99 for the KDE repos, it did not update them, unless I choosed, "Packages --> update all, if newer version is available". I would like to set Kpackagekit into silent and just stick with YaST for that, but have an automatic system update.
I am using OpenSuSE11.1 very frequently I need to install and update the software and packages.but I am getting this error: Download failed:File '/repodata/repomd.xml' not found on medium URL...
View 3 Replies View RelatedI've installed opensuse 11.3 on my computer (well actually Ive done it twice, once with full DVD image and once with network install). Everything was OK until Ive made update (yast/software/online update <-- BTW kupdate applet isn't working, just update bar appear and stuck on 0%). i haven't installed any additional packages, only the defaults (KDE desktop). after update only fail safe option is working (booting normally and looks like normal desktop, no visual differences between normal and fail safe booting, if there should been any). When I've tried to find solution for this problem, very ofter answers were -> graphic drivers problem (im using ati hd 4670 AGP <-- yea, AGP . well when i start normal boot green screen with lizard logo appear, then screen goes black for a second or two, then the green screen come again, and after another few second screen goes black permanently with working hdd for 30-40 second (hdd led blinking) BTW i have windows7 pro (booting fine) on this machine too, it was installed as first system on hd0,0. opensuse was installed on stand alone PATA disk (secondary EIDE master, ODD on slave). how to gather info which u all need to get this problem more detailed. PS> sorry for my English, its not my native language.
View 7 Replies View RelatedI was using tripleboot system in one hard drive. That included Windows 7,Ubuntu 10.10 and Ubuntu 11.04. And yesterday I decided to added openSUSE 11.3 at another partition. I'm using Ubuntu 11.04 grub2 as bootloader.
At first there was no problem. All OS detected well, but after opeSUSE online updates last night my openSUSE partition won't boot. First, at boot I chose openSUSE and it said "Boot kernel first" and nothing happens. And then I boot to ubuntu and ran update-grub then I saw grub no longer detected openSUSE partition.
I got a workstation with openSuse 10.3 pre-installed. After I did the Online Update from YaST2 and rebooted the machine as requested by YaST2, the system came to fail starting up an X session.
Below are excerpts of the message appeared on the screen at the end of the boot process. (I transcripted it from the screen by hand.)
Code:
Waiting for mandatory devices: eth1 __NSC__
10 9 8 7 5 4 3 2 1
eth1 devices: Intel Corporation 82573L Gigabit Ethernet Controller
eth1 DHCP4 client (dhcpcd) is running
[Code].....
what is causing the failure of the X session and how to fix the problem? I would be glad if you give me any hints or pointers.
I have just visited this page here, Updating openSUSE - openSUSE I have been trying to update my OpenSuSE system for a week now and I have absolutely no idea what causes this problem. The update would start but would stop right in the middle and refuse to install some pulseaudio(...) package... It would indicate that network is down while I am sure it is up.
I am behind a proxy and I have again and again made sure that the proxy settings are correct and alright. Since it downloads some of the packages in the start I believe my connection and settings are OK. Maybe the SuSE server is down, but not for a whole week, I don't think so. I would also like to mention that I have only tried updating through YaST GUI and I am, as of yet, unaware of any console or command-line methods of updating.
I really would like to update my system because I happen to be paranoid in matters of computer security. (Just kidding) But since I cannot install any updates it should mean I might have problem installing new software. So my digital life is literally crippled because of this problem.
So after a win7 wubi install, I updated through system update. Now after I choose ubuntu in the win bootloader it takes me to a grub screen. How can I boot into linux and remove grub? (This isn't my computer otherwise I would dual boot and let grub take care of it).
View 5 Replies View Relatedopensuse v11.3
linux 2.6.34.7-0.3-desktop x86_64
The most recent update that produced the kernel version above is bit of a disaster for me. The open source radeon driver does not work with VirtualBox (it crashes at startup), and the ATI fglrx driver either builds without acceleration (or the X server loads it that way?) or fails to build.
Is there a way to undo some (or all, if necessary) of the update?
I was trying to get the package ready to install my Graphics card to the new update. This is the problem that I am having.
Code:
Problem: nothing provides kernel-devel = 2.6.35-21 needed by kernel-syms-2.6.35-21.1.x86_64 Solution 1: do not install kernel-syms-2.6.35-21.1.x86_64 Solution 2: break kernel-syms by ignoring some of its dependencies Choose from above solutions by number or cancel [1/2/c] (c): c Now the vanilla kernel is 2.6.35-21 were as the "default" opensuse one is 2.6.35-20. I have googled and told opensuse download search engine to look for the 2.6.35-20. I cannot find it at all.
If I upgraded to the vanilla kernel without the opensuse patches would it make my machine unstable? Or can I tell it to break some of the dependencies?
When i update package sax2-tools to version 8.1-618.1, from Xorg repository 11.2, it autimatically offers to delete the following packages:
sax2
sax2-gui
sax2-ident
sax2-libsax
sax2-libsax-perl
Dont know if this is a wanted behaviour.
I think opensuse should provide regenerated ISO files to public after several package updated. I think this may help reduce duplicate bug reports and reduce net traffics. I think this can greatly increase the user experience of opensuse.
View 5 Replies View RelatedI'm running Opensuse 3 on an EEE PC, and so far had no problems. I brought it to another house today and now Firefox seems to be unable to connect to the network.. Network is working however, as Skype is running fine. Online update won't work either.
View 5 Replies View RelatedI manage a computer remotely in a different country. The last upgrade I did (to openSUSE 11.2) seems to have had one issue that I didn't work out until later. I am unable to "Online Update" or "Software Manage" the system. Whenever I do I get the following error:
[Code]....
I have been through a number of attempted fixes via the thread 434687-software-repository-corruption but have not managed to resolve the issue. There is no one at the location that could repeat the "update" to hopefully fix the issue that way. I have a copy of the 11.2 DVD iso file on the remote computer. Is there some way that I can get the repository DB rebuilt or reinstalled so that I can then install other software and do Online Updates? Whatever I try has to be doable with the system running so that I can OpenVPN connect and issue commands remotely.
I'm running 10.3, KDE, 32bit. I am working with a fresh install. The updater stated that I had updates , I accepted the updates. At this point the updater failed in some way. It did not become a zombi but stalled. I quit the updater. Now when I try and get online updates using the sys tray updater it sais none available. When I use yast online update it has some recommended updates but does not install them. I rebuilt the rpm data base and this did not help.
How can I "reset" the updater. I believe that it thinks that it did go thru the updates and therefor cant see that they still need attention.
I cannot use the online update and any other web repository because I got the following error while using the online update:
Code:
Errore durante il download di (curl) per 'http://packman.iu-bremen.de/suse/11.3/repodata/repomd.xml':
Codice dell'errore: Connection failed
Messaggio dell'errore: couldn't connect to host
the translation is:
Code:
Error during downloading (curl) from 'http://packman.iu-bremen.de/suse/11.3/repodata/repomd.xml':
Error code: Connection failed
Error message: couldn't connect to host
I would point out that any other application that needs accessing the internet is working correctly.
I am whittling down my list of available YAST Online Updates for OpenSUSE 10.3. Most of the few remaining updates will not install because of an endless error list like this (xmessage on cancel):(gtk:4929): GLib-GObject-WARNING **: invalid cast from `GtkTextView' to `YGtkRichText'** (gtk:4929): WARNING **: Unknown tag 'p'
View 1 Replies View RelatedI was using audacious happily, but after the dist-update last week I can't get is working anymore. The error message is:
audacious2: symbol lookup error: audacious2: undefined symbol: index_new
Version: audacious-2.2-1.pm.5.1
uname -a output is: Linux linux-9b84 2.6.27.39-0.2-default #1 SMP 2009-11-23 12:57:38 +0100 x86_64 x86_64 x86_64 GNU/Linux
Deleting .config/audacious, .local/share/audacious, and .cache/audacious doesn't help (it did with a similar problem before). how to get this program working again?
I tried to set up my internet connection using the network manager and not the classic iufp method. At first it just didn't work but after deactivating IPv6 I got it working: firefox can connect to the internet. What troubles me is the online update with Update Applet. The following message pops up: "Error: packageKit error repo-not-available: Failed to download /media fromAlso when I go to Yast->Software->Software repositories I get the msg:Systemadministration is blocked by PID 2459 (/usr/sbin/packagekitd). Close the application and try again.Using the command "sudo zypper refresh"eates the same message.I spent already hours trying to figure out the problem without luck
View 3 Replies View RelatedIn OpenSuSE 11.2 YaST -> Online Update Configuration I can configure how often the system should check for updates (i.e. daily, weekly). Does this operate independently from the Online Update Applet(kupdateapplet)? The reason I ask is that the Applet doesn't always seem to work correctly. However, if the system will check for online updates automatically regardless of the Applet, perhaps this isn't an issue. If I can avoid messing with the Applet, that would be great.
View 1 Replies View RelatedToday i upgraded my system and started getting error when i update, install or remove a package. The error isn't restricted only to one repository so i thing something is wrong with my system.
[Code]....
Is it possible to get a package that makes the OpenOffice drop-down for font selection use the fonts so that i can compare them? I seem to remember it is but can't remember the package name. I am really looking for something like the MicroSquish Font "Monotype Corsiva". I am currently using a LiveCd of Ubuntu 9.04.
View 2 Replies View Related