I performed the online update which included a kernel upgrade. After restart I no longer get a working display. Otherwise appears to boot, as I can see the drive from my laptop via samba. I cannot get a display in either normal boot nor in failsafe. I am also not able to get a terminal screen.Grub boot includes VGA=0x31aAre there any other boot options I can enter to at least get to a terminal?
View 9 Replieswhen I launch Yast2 - Online Update, I get an error during the repository refresh that it could refresh the repository.Since it's easier to copy-paste - here is the output from 'zypper ref' with the same error:
Code:
Retrieving repository 'Updates for openSUSE 11.3 11.3-1.82' metadata [|]
Failed to download ./repodata/cefcc9d56264aa169f70a53c560ffc39cb6af575-deltainfo.xml.gz
from http://download.opensuse.org/update/11.3/
A[code]...
On my work computer I installed Opensuse11.2 in VirtualBox. However online update or installs which are downloaded through YAST2 are not working. I get the message "Failed to download media ....." and that's it. I configured the proxy and when using the test proxy button it tells me that the proxy works OK. If I copy the link from yast into Firefox I get to the site of the repositories without problems only Yast cannot connect. Neither from the GUI nor from the console. I had no problems with Opensuse11.0 and previous versions. WHat is the problem?
View 7 Replies View RelatedYast online update is installed, but no repositories were configured. On previous installations, they were.
Is this a known problem, and how can I pull in the full list?
I know I should be able to do an online update using cl zypper but would much prefer to use Yast's sw manager as it's easier to review and respond to package issues that always arise (because of packages made by me or dl'ed from obs but from repos not enabled in the repo manager)currently running 11.2
View 9 Replies View RelatedNot sure this is the right place and I feel really stupid for asking this but, I want to change the frequency of the online update checks but, for the life of me, cannot find out how. During install, I can configure it but I now want something different. I thought that there was a topic with yast under software but no. Only "online update" which basically give me manual update. I click on configure but same screen appears.
View 2 Replies View Relatedin the last few days, Kpackagekit, which I use to update my system (openSUSE 11.4) had some difficulties to
1. install updates for flashplugin, because whenever you accept the license, Kpackagekit closes, and starts from beginning = a never ending cycle is started
2. fetch updates from Packman. It always throws a message with connection timeout - in Zypper and YaST no such problem occurs
Thats why I have fiddled around in YaST online update and found a feature "automatic online update". For that you need an extra package yast-online-update-configuration. I installed it and configured it to do automatic Updates.
So now I have a question on how it works. Because I have some additional repos activated: KDE updated Apps, KDE extra and the KDE release 4.6 repo, which brings the most recent KDE updates for KDE 4.6.
These repos have priority 90 whereas all the other repos - Packman, OSS, Non-OSS, Contrib etc. have prio 99.
Will YaST install all the updates from KDE with this setup? I am asking, because when I did online updates in Yast before, with prio 99 for the KDE repos, it did not update them, unless I choosed, "Packages --> update all, if newer version is available". I would like to set Kpackagekit into silent and just stick with YaST for that, but have an automatic system update.
I am using OpenSuSE11.1 very frequently I need to install and update the software and packages.but I am getting this error: Download failed:File '/repodata/repomd.xml' not found on medium URL...
View 3 Replies View Relatedhow certain packages such as glib, yast2, etc. are part of "Online update" i.e. new versions show up there, whereas certain packages are not (e.g. NVIDIA drivers). Is it a setting on the repository, the package, or does the new version need to be labelled specifically?
View 3 Replies View RelatedI've installed opensuse 11.3 on my computer (well actually Ive done it twice, once with full DVD image and once with network install). Everything was OK until Ive made update (yast/software/online update <-- BTW kupdate applet isn't working, just update bar appear and stuck on 0%). i haven't installed any additional packages, only the defaults (KDE desktop). after update only fail safe option is working (booting normally and looks like normal desktop, no visual differences between normal and fail safe booting, if there should been any). When I've tried to find solution for this problem, very ofter answers were -> graphic drivers problem (im using ati hd 4670 AGP <-- yea, AGP . well when i start normal boot green screen with lizard logo appear, then screen goes black for a second or two, then the green screen come again, and after another few second screen goes black permanently with working hdd for 30-40 second (hdd led blinking) BTW i have windows7 pro (booting fine) on this machine too, it was installed as first system on hd0,0. opensuse was installed on stand alone PATA disk (secondary EIDE master, ODD on slave). how to gather info which u all need to get this problem more detailed. PS> sorry for my English, its not my native language.
View 7 Replies View RelatedI was using tripleboot system in one hard drive. That included Windows 7,Ubuntu 10.10 and Ubuntu 11.04. And yesterday I decided to added openSUSE 11.3 at another partition. I'm using Ubuntu 11.04 grub2 as bootloader.
At first there was no problem. All OS detected well, but after opeSUSE online updates last night my openSUSE partition won't boot. First, at boot I chose openSUSE and it said "Boot kernel first" and nothing happens. And then I boot to ubuntu and ran update-grub then I saw grub no longer detected openSUSE partition.
I got a workstation with openSuse 10.3 pre-installed. After I did the Online Update from YaST2 and rebooted the machine as requested by YaST2, the system came to fail starting up an X session.
Below are excerpts of the message appeared on the screen at the end of the boot process. (I transcripted it from the screen by hand.)
Code:
Waiting for mandatory devices: eth1 __NSC__
10 9 8 7 5 4 3 2 1
eth1 devices: Intel Corporation 82573L Gigabit Ethernet Controller
eth1 DHCP4 client (dhcpcd) is running
[Code].....
what is causing the failure of the X session and how to fix the problem? I would be glad if you give me any hints or pointers.
This morning, I authorized an update as almost every day. I saw that the nvidia driver was on the list but in recent years, I no longer fear these driver updates since everything usually works well...
Except that this time, no! I turn on my pc this afternoon and more 3d effects. I run "Nvidia X Server Settings" which tells me I do not use the nvidia driver and must run as root the command "nvidia-xconfig," what I do. I restart X and no display at all, only the prompt in text mode!
I used the zypper dup tool to upgrade my HP Pavilion dv6000 laptop and my display is now broken into columns and partially obscured. I can barely see anything on it. When I ran zypper it stopped about half way and locked up.I then ran it again to completion. At boot, GRUB gives me my startup options as before and is clearly readable with good resolution. When I select openSuse to start it, the screen goes blank for a few seconds and then comes back with the screen problems.
The problem continues all the way into KDE. I have approximately four columns displayed but I can barely see anything. Most of the lower half of what should be displayed is obscured so I cannot load any applications. If I right click, I can make out the dialog box and select the run command. From there I reran the zypper command using the 'zypper up rpm' option and it says "nothing to do" and the "highest update version is already installed."
The display problem also exists if I use the failsafe boot option. I remember having to download nVidia driver last year to get a better resolution, but 11.2 (64 bit) worked great until the repositories stopped working and I no longer was able to load software. Now I can't use the computer to download and burn a DVD version of 11.4. Again, I do seem to be able to use the terminal, so I could presumably fix something with it if I had the right commands and I do seem to have access to the repositories.
I'm running Opensuse 3 on an EEE PC, and so far had no problems. I brought it to another house today and now Firefox seems to be unable to connect to the network.. Network is working however, as Skype is running fine. Online update won't work either.
View 5 Replies View RelatedI manage a computer remotely in a different country. The last upgrade I did (to openSUSE 11.2) seems to have had one issue that I didn't work out until later. I am unable to "Online Update" or "Software Manage" the system. Whenever I do I get the following error:
[Code]....
I have been through a number of attempted fixes via the thread 434687-software-repository-corruption but have not managed to resolve the issue. There is no one at the location that could repeat the "update" to hopefully fix the issue that way. I have a copy of the 11.2 DVD iso file on the remote computer. Is there some way that I can get the repository DB rebuilt or reinstalled so that I can then install other software and do Online Updates? Whatever I try has to be doable with the system running so that I can OpenVPN connect and issue commands remotely.
Since applying a number of updates using the online update tool in Yast, the online update tool can no longer contact the software repositories which were configured in Yast.If i browse to the URL which is configured within the software repo config tool, I can see the updates & folders fine in Firefox.Zypper seems to do the same thing & just sits there if I do zypper update.I see a number of other people in this forum have had the same problems, any ideas as I couldn?t find a resolution?
View 1 Replies View RelatedI'm running 10.3, KDE, 32bit. I am working with a fresh install. The updater stated that I had updates , I accepted the updates. At this point the updater failed in some way. It did not become a zombi but stalled. I quit the updater. Now when I try and get online updates using the sys tray updater it sais none available. When I use yast online update it has some recommended updates but does not install them. I rebuilt the rpm data base and this did not help.
How can I "reset" the updater. I believe that it thinks that it did go thru the updates and therefor cant see that they still need attention.
I cannot use the online update and any other web repository because I got the following error while using the online update:
Code:
Errore durante il download di (curl) per 'http://packman.iu-bremen.de/suse/11.3/repodata/repomd.xml':
Codice dell'errore: Connection failed
Messaggio dell'errore: couldn't connect to host
the translation is:
Code:
Error during downloading (curl) from 'http://packman.iu-bremen.de/suse/11.3/repodata/repomd.xml':
Error code: Connection failed
Error message: couldn't connect to host
I would point out that any other application that needs accessing the internet is working correctly.
I am whittling down my list of available YAST Online Updates for OpenSUSE 10.3. Most of the few remaining updates will not install because of an endless error list like this (xmessage on cancel):(gtk:4929): GLib-GObject-WARNING **: invalid cast from `GtkTextView' to `YGtkRichText'** (gtk:4929): WARNING **: Unknown tag 'p'
View 1 Replies View RelatedI was using audacious happily, but after the dist-update last week I can't get is working anymore. The error message is:
audacious2: symbol lookup error: audacious2: undefined symbol: index_new
Version: audacious-2.2-1.pm.5.1
uname -a output is: Linux linux-9b84 2.6.27.39-0.2-default #1 SMP 2009-11-23 12:57:38 +0100 x86_64 x86_64 x86_64 GNU/Linux
Deleting .config/audacious, .local/share/audacious, and .cache/audacious doesn't help (it did with a similar problem before). how to get this program working again?
I tried to set up my internet connection using the network manager and not the classic iufp method. At first it just didn't work but after deactivating IPv6 I got it working: firefox can connect to the internet. What troubles me is the online update with Update Applet. The following message pops up: "Error: packageKit error repo-not-available: Failed to download /media fromAlso when I go to Yast->Software->Software repositories I get the msg:Systemadministration is blocked by PID 2459 (/usr/sbin/packagekitd). Close the application and try again.Using the command "sudo zypper refresh"eates the same message.I spent already hours trying to figure out the problem without luck
View 3 Replies View RelatedIn OpenSuSE 11.2 YaST -> Online Update Configuration I can configure how often the system should check for updates (i.e. daily, weekly). Does this operate independently from the Online Update Applet(kupdateapplet)? The reason I ask is that the Applet doesn't always seem to work correctly. However, if the system will check for online updates automatically regardless of the Applet, perhaps this isn't an issue. If I can avoid messing with the Applet, that would be great.
View 1 Replies View RelatedWhen I try to update on line I get the messagehttp://download.opensuse.org/reposit...ctory_Desktop/ not found.I am using openSuse 11.2 with KDE desktop.
View 7 Replies View RelatedI have an OS 11.4 system running on a network which prevents me from using the publicly available update repositories. Is there a way to mirror the update repositories onto a flash drive and updating from there?
Is this as simple as using wget to mirror certain directories on the public repository?
my server is still running on 10.3 and I want to upgrade it to 11.3. I can't access it physically so it has to be an online upgrade. I have already learned that it is possible to upgrade from 11.x to 11.3 using Zypper from this nice german tutorial (Upgrade). But does it also work from 10.3? Should I upgrade all at once or every single version for itself?
View 3 Replies View RelatedUsing 11.2 64 bit on Amd 3200 64I installed 4 Days ago After running a online update yesterday with Yast which was completely finished, starting the machine today, I wanted to add a program Yast reports "UI Syntacs Error Couldn't load plugin qt_pkg" Using 11.0 on P2800 I run an online update 3 days ago. Today I started, the updater reported updates. When I accepted I got the error message "DBus error :Unable to get transaction id from packagekit." Disabling the updater, starting Yast, I got "error initializing the repositorys.Parse error." and "UI Syntacs Error Couldn't load plugin qt_pkg" On both machines I gave the command rpm --rebuilddb On the 11.2 Yast started without error.
I wanted to instal a program when the download was completed I got again the message "UI Syntacs Error Couldn't load plugin qt_pkg"On the 11.0 Yast installed a small Program without error.When I opened Yast online update, I got the "parse error again. When I say o.k. there, Updates are shown and installed. However using the updater kit it reports still "DBus error : Unable to get transaction id from packagekit". How can I fix the DBUS error of the 11.0 (On an 9.0 I had to deinstall Rug and thereafter run only Yast) I can deal with the Parser error myself, checking all Repositories should do it)
i tried kde settings: disabled screen saver, disabled monitor power management. nothing worked. even i tried to find something in yast -- no luck. actually screen goes black after about 10 mins of inactivity which is annoying while watching in ex. videos. playing kaffeine is ok - i think it's because kaffeine makes "fake mouse movements". suse 11.3, linux 2.6.34.4-0.1-default x86_64, kde: 4.4.4 (kde 4.4.4) "release 2". adm athlon dual core 4450e (2.3ghz), 2 gb ram, geforce 9600 gso 512 with nvidia driver.
View 5 Replies View RelatedAt some point, the install process asks whether to test internet access. I replied Yes, and the test failed. Retries also failed, leading me to conclude, mistakenly, that the ethernet card was not supported by SuSE 11.2. Finally I elected to skip the test, resigned to the loss of internet access. The install program then proceeded to access online repositories without difficulty, and I had no further difficulty accessing the internet. So why the misleading test result?
View 3 Replies View Relatedi am a new opensuse user from vietnam. I installed opensuse 11.3 last week, and i have a serious problem with repo. I can't enter it . It's mean i can't update (by update applet), install codec, new software, .
View 1 Replies View Related