OpenSUSE :: Online Update Not Working After 11.2 Package Updates?
Mar 26, 2010
Since applying a number of updates using the online update tool in Yast, the online update tool can no longer contact the software repositories which were configured in Yast.If i browse to the URL which is configured within the software repo config tool, I can see the updates & folders fine in Firefox.Zypper seems to do the same thing & just sits there if I do zypper update.I see a number of other people in this forum have had the same problems, any ideas as I couldn?t find a resolution?
View 1 Replies
ADVERTISEMENT
Sep 8, 2010
In OpenSuSE 11.2 YaST -> Online Update Configuration I can configure how often the system should check for updates (i.e. daily, weekly). Does this operate independently from the Online Update Applet(kupdateapplet)? The reason I ask is that the Applet doesn't always seem to work correctly. However, if the system will check for online updates automatically regardless of the Applet, perhaps this isn't an issue. If I can avoid messing with the Applet, that would be great.
View 1 Replies
View Related
Sep 7, 2010
how certain packages such as glib, yast2, etc. are part of "Online update" i.e. new versions show up there, whereas certain packages are not (e.g. NVIDIA drivers). Is it a setting on the repository, the package, or does the new version need to be labelled specifically?
View 3 Replies
View Related
Nov 4, 2010
I'm running Opensuse 3 on an EEE PC, and so far had no problems. I brought it to another house today and now Firefox seems to be unable to connect to the network.. Network is working however, as Skype is running fine. Online update won't work either.
View 5 Replies
View Related
Feb 19, 2010
I tried to set up my internet connection using the network manager and not the classic iufp method. At first it just didn't work but after deactivating IPv6 I got it working: firefox can connect to the internet. What troubles me is the online update with Update Applet. The following message pops up: "Error: packageKit error repo-not-available: Failed to download /media fromAlso when I go to Yast->Software->Software repositories I get the msg:Systemadministration is blocked by PID 2459 (/usr/sbin/packagekitd). Close the application and try again.Using the command "sudo zypper refresh"eates the same message.I spent already hours trying to figure out the problem without luck
View 3 Replies
View Related
Oct 15, 2010
It appears I have gotten a bug when I try to update 11.0 or download even a update foe firefox. When I tried to see if there were any updates it said it could not do it and put up a screen stating the following. File'/repodata/repomd.xml/' not found on medium [URL]. Is there a way to fix this problem? I am a 66year old quy who is trying to learn the ins and outs of Lenox so please keep it simple.
View 4 Replies
View Related
Apr 11, 2011
I have an OS 11.4 system running on a network which prevents me from using the publicly available update repositories. Is there a way to mirror the update repositories onto a flash drive and updating from there?
Is this as simple as using wget to mirror certain directories on the public repository?
View 5 Replies
View Related
Jan 10, 2010
when ever i try to install updates i get shown an error & the updates stop the error i get says "librpmio.so.0 is needed by package abrt-1.0.3-1.fc12.i686 (updates) librpm.so.0 is needed by package abrt-1.0.3-1.fc12.i686 (updates)"
View 12 Replies
View Related
May 9, 2010
Using 11.2 64 bit on Amd 3200 64I installed 4 Days ago After running a online update yesterday with Yast which was completely finished, starting the machine today, I wanted to add a program Yast reports "UI Syntacs Error Couldn't load plugin qt_pkg" Using 11.0 on P2800 I run an online update 3 days ago. Today I started, the updater reported updates. When I accepted I got the error message "DBus error :Unable to get transaction id from packagekit." Disabling the updater, starting Yast, I got "error initializing the repositorys.Parse error." and "UI Syntacs Error Couldn't load plugin qt_pkg" On both machines I gave the command rpm --rebuilddb On the 11.2 Yast started without error.
I wanted to instal a program when the download was completed I got again the message "UI Syntacs Error Couldn't load plugin qt_pkg"On the 11.0 Yast installed a small Program without error.When I opened Yast online update, I got the "parse error again. When I say o.k. there, Updates are shown and installed. However using the updater kit it reports still "DBus error : Unable to get transaction id from packagekit". How can I fix the DBUS error of the 11.0 (On an 9.0 I had to deinstall Rug and thereafter run only Yast) I can deal with the Parser error myself, checking all Repositories should do it)
View 6 Replies
View Related
May 2, 2010
I'm running Suse 11.1 KDE 3.5. My wireless is working absolutely slow. Pages aren't loading fast and I timeout when trying to do online updates. Here's some information:
Device: PRO/Wireless 3945 ABG [Golan] Network Connection
Kernel Driver: iwl3945
All my firmware seems to be in order.
/usr/sbin/iwlist scan
lo Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
wlan0 Scan completed : .....
ping -c 5 Google
Google ping statistics
5 packets transmitted, 5 received, 0% packet loss, time 4027ms
View 2 Replies
View Related
Mar 18, 2011
Earlier I have no problems when I install opensuse. After installation the network runs and I can run online updating in yast for the system. But since a few version it doesn't work after installation and I don't know why. I think maybe the errors could happen because I have no
internet connection. Today I install 11.4 and get this message when I want to run online updates in yast.
There is an error in the repository initialization
'repo-update' [URL]
[repo-update URL]
Repository is not cached
I think this problem stars with 11.1 or 11.2.
View 5 Replies
View Related
Sep 21, 2010
when I launch Yast2 - Online Update, I get an error during the repository refresh that it could refresh the repository.Since it's easier to copy-paste - here is the output from 'zypper ref' with the same error:
Code:
Retrieving repository 'Updates for openSUSE 11.3 11.3-1.82' metadata [|]
Failed to download ./repodata/cefcc9d56264aa169f70a53c560ffc39cb6af575-deltainfo.xml.gz
from http://download.opensuse.org/update/11.3/
A[code]...
View 8 Replies
View Related
Sep 3, 2010
I have the package "xvidcap" (Screen recorder) installed in Ubuntu, the problem I have is the version I have installed is an older version and there is a newer version avaliable, but I don't want to install the newer version as this breaks some functionality regarding screen capturing e.g. audio capturing. But each time I run Update Manager the package appears in the list to be upgraded.
Is there anyway to flag the package as do not upgrade or something to make it not appear in Update Manager or at least have it greyed out so the checkbox isn't automatically checked each time update manager is ran?
View 4 Replies
View Related
Jul 4, 2010
After the most recent Firefox update (3.6.6), Flash video has stopped working. I have the Flash player plugin from Adobe (adobe-flashplugin version 10) and it is not working. I have tried uninstalling it and installing the flashplugin-installer package instead, that did not, so I reinstalled the adobe-flashplugin package and still have nothing. All using synaptic package manager.
More specifically, flash videos do not show up at all: ....., anything: just a blank spot on the screen.
View 2 Replies
View Related
Feb 21, 2011
I am using OpenSuSE11.1 very frequently I need to install and update the software and packages.but I am getting this error: Download failed:File '/repodata/repomd.xml' not found on medium URL...
View 3 Replies
View Related
Apr 27, 2011
I have a problem in updating opensuse 11.4, when I try to update the system the progress stops in the update window, and no updates appear
View 9 Replies
View Related
Apr 21, 2010
On my work computer I installed Opensuse11.2 in VirtualBox. However online update or installs which are downloaded through YAST2 are not working. I get the message "Failed to download media ....." and that's it. I configured the proxy and when using the test proxy button it tells me that the proxy works OK. If I copy the link from yast into Firefox I get to the site of the repositories without problems only Yast cannot connect. Neither from the GUI nor from the console. I had no problems with Opensuse11.0 and previous versions. WHat is the problem?
View 7 Replies
View Related
Apr 30, 2011
I performed the online update which included a kernel upgrade. After restart I no longer get a working display. Otherwise appears to boot, as I can see the drive from my laptop via samba. I cannot get a display in either normal boot nor in failsafe. I am also not able to get a terminal screen.Grub boot includes VGA=0x31aAre there any other boot options I can enter to at least get to a terminal?
View 9 Replies
View Related
Dec 17, 2010
I'm running 10.3, KDE, 32bit. I am working with a fresh install. The updater stated that I had updates , I accepted the updates. At this point the updater failed in some way. It did not become a zombi but stalled. I quit the updater. Now when I try and get online updates using the sys tray updater it sais none available. When I use yast online update it has some recommended updates but does not install them. I rebuilt the rpm data base and this did not help.
How can I "reset" the updater. I believe that it thinks that it did go thru the updates and therefor cant see that they still need attention.
View 3 Replies
View Related
Mar 16, 2010
Yast online update is installed, but no repositories were configured. On previous installations, they were.
Is this a known problem, and how can I pull in the full list?
View 5 Replies
View Related
Jun 14, 2010
I know I should be able to do an online update using cl zypper but would much prefer to use Yast's sw manager as it's easier to review and respond to package issues that always arise (because of packages made by me or dl'ed from obs but from repos not enabled in the repo manager)currently running 11.2
View 9 Replies
View Related
Apr 29, 2011
Not sure this is the right place and I feel really stupid for asking this but, I want to change the frequency of the online update checks but, for the life of me, cannot find out how. During install, I can configure it but I now want something different. I thought that there was a topic with yast under software but no. Only "online update" which basically give me manual update. I click on configure but same screen appears.
View 2 Replies
View Related
May 21, 2011
in the last few days, Kpackagekit, which I use to update my system (openSUSE 11.4) had some difficulties to
1. install updates for flashplugin, because whenever you accept the license, Kpackagekit closes, and starts from beginning = a never ending cycle is started
2. fetch updates from Packman. It always throws a message with connection timeout - in Zypper and YaST no such problem occurs
Thats why I have fiddled around in YaST online update and found a feature "automatic online update". For that you need an extra package yast-online-update-configuration. I installed it and configured it to do automatic Updates.
So now I have a question on how it works. Because I have some additional repos activated: KDE updated Apps, KDE extra and the KDE release 4.6 repo, which brings the most recent KDE updates for KDE 4.6.
These repos have priority 90 whereas all the other repos - Packman, OSS, Non-OSS, Contrib etc. have prio 99.
Will YaST install all the updates from KDE with this setup? I am asking, because when I did online updates in Yast before, with prio 99 for the KDE repos, it did not update them, unless I choosed, "Packages --> update all, if newer version is available". I would like to set Kpackagekit into silent and just stick with YaST for that, but have an automatic system update.
View 4 Replies
View Related
Nov 8, 2010
I cannot use the online update and any other web repository because I got the following error while using the online update:
Code:
Errore durante il download di (curl) per 'http://packman.iu-bremen.de/suse/11.3/repodata/repomd.xml':
Codice dell'errore: Connection failed
Messaggio dell'errore: couldn't connect to host
the translation is:
Code:
Error during downloading (curl) from 'http://packman.iu-bremen.de/suse/11.3/repodata/repomd.xml':
Error code: Connection failed
Error message: couldn't connect to host
I would point out that any other application that needs accessing the internet is working correctly.
View 9 Replies
View Related
Aug 6, 2011
I am running openSUSE 11.4 KDE 4.6.5 on my desktop AMD64. Just added R47 repo in order to upgrade KDE 4.6.5 to 4.7. However, after running zypper up I saw lots of packages not being updated.code...
View 4 Replies
View Related
Feb 4, 2010
I am whittling down my list of available YAST Online Updates for OpenSUSE 10.3. Most of the few remaining updates will not install because of an endless error list like this (xmessage on cancel):(gtk:4929): GLib-GObject-WARNING **: invalid cast from `GtkTextView' to `YGtkRichText'** (gtk:4929): WARNING **: Unknown tag 'p'
View 1 Replies
View Related
Dec 17, 2010
I've installed opensuse 11.3 on my computer (well actually Ive done it twice, once with full DVD image and once with network install). Everything was OK until Ive made update (yast/software/online update <-- BTW kupdate applet isn't working, just update bar appear and stuck on 0%). i haven't installed any additional packages, only the defaults (KDE desktop). after update only fail safe option is working (booting normally and looks like normal desktop, no visual differences between normal and fail safe booting, if there should been any). When I've tried to find solution for this problem, very ofter answers were -> graphic drivers problem (im using ati hd 4670 AGP <-- yea, AGP . well when i start normal boot green screen with lizard logo appear, then screen goes black for a second or two, then the green screen come again, and after another few second screen goes black permanently with working hdd for 30-40 second (hdd led blinking) BTW i have windows7 pro (booting fine) on this machine too, it was installed as first system on hd0,0. opensuse was installed on stand alone PATA disk (secondary EIDE master, ODD on slave). how to gather info which u all need to get this problem more detailed. PS> sorry for my English, its not my native language.
View 7 Replies
View Related
Dec 2, 2009
I was using audacious happily, but after the dist-update last week I can't get is working anymore. The error message is:
audacious2: symbol lookup error: audacious2: undefined symbol: index_new
Version: audacious-2.2-1.pm.5.1
uname -a output is: Linux linux-9b84 2.6.27.39-0.2-default #1 SMP 2009-11-23 12:57:38 +0100 x86_64 x86_64 x86_64 GNU/Linux
Deleting .config/audacious, .local/share/audacious, and .cache/audacious doesn't help (it did with a similar problem before). how to get this program working again?
View 9 Replies
View Related
Feb 4, 2011
I would like the updater applet to offer updates other than security fixes from the base repos. For example I would like to be notified automatically about updates for VLC and Chrome. How do I do that?
View 8 Replies
View Related
Oct 4, 2010
After a lot of work I succeeded in making my Icon 225 Mobile Broadband working under Linux, so I immediately took advantage of this by updating my system.But unfortunately not everything went well. I have to say something:in Linux when you solved a problem another one pops up. And this is what happened to me. The first problem was the following error message: PackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium [URL]
It seems that in the Online update system there is a error: or the address is wrong or something is not working as it should be. Anyway I got over it and the system started to download the updates and so on. At the end the system asked me to reboot and I did it. Unfortunately a cold shower was waiting me : the KDE interface did not work anymore, the only thing I could see was something like a fog all around the video. The mouse cursor was a dark square. I was still able to hear the welcome sound so I deduced that only the graphic interface was corrupted. I rebooted again and when the system show me the booting choices:
1) Desktop opensuse 11.3-2.6.34.7-0.3
2) Failsafe opensuse 11.3-2.6.34.7-0.3
3) windows 1
4) windows 2
5) Floppy
I chose this time the second one (I think it is like a safe mode)and fortunately it worked but the system looked like having lost brightness (I think this choice change the card driver). Now I do not know why the KDE inrface got corrupted, because I download everything from the opesuse website, so no strange repository has been installed. I checked in the little manual supplied with the DVD and I found the following suggestion: If the KDE interface got corrupted please try to remove the cache files of the KDE desktop using the following command rm -rf /tmp/kde-user /tmp/ksocket-user
View 9 Replies
View Related
