Debian Installation :: Lenovo 100S Fails To Run Installer / No Keyboard
Nov 25, 2015
This laptop has been in the mainstream news as the cheapest Windows laptop available. Unfortunately it has a 64-bit CPU with 32-bit UEFI that dumps to the grub shell before installation. In addition, the built-in keyboard does not work.
As far as the dump to shell problem, this seems like something is not setup correctly in the grub UEFI configuration. This "hybrid" notebook should be using the multi-arch as I understand the situation. I noticed there is no grub configuration file in the multi-arch netinst ISO when I mounted it and looked around. I also noticed the standard netinst ISO is not easily mountable: there are errors when I try to mount the individual partitions to inspect the grub configuration. Additionally, Kubuntu boots perfectly aside from the keyboard issue. Devuan also boots when I modify the netinst to bypass gummiboot and use grub directly. Finally, the multi-arch grub shell freezes up when autocompleting and searching through the drives for the grub config, leading to a forced reboot. As an extra note, I tried 2 different flash drives and CD install media with the same results.
I tried many, many grub kernel combinations to fix the keyboard issue. It works in grub, but not in Linux. I was ultimately going to try a newer kernel to fix it.I was in a hurry to get something set up so back to the store it goes.
View 1 Replies
ADVERTISEMENT
Jan 10, 2011
I'm trying to install Debian Testing onto my Acer Aspire One ZG5 using the testing versions of boot.img and debian-testing-i386-CD-1.iso. I previously installed (two days ago) the latest release of stable, and the boot.img/CD1 from that worked fine, installed seamlessly. With testing though, the menu does not respond to the keyboard as soon as the menu appears to select Install/Graphical install/Help, etc. I have also tried to boot with an external (USB) keyboard, which again, works fine with the stable version of boot.img/CD1, but not testing.I did some searching and couldn't find anything that looked similar
View 6 Replies
View Related
Jul 6, 2011
I am using Wheezy netinstall on a USB stick. The machine has an Intel DH57JG motherboard, USB keyboard, and no optical drive. The installer loads to the initial screen OK, but the keyboard is not active. This problem has been reported for several years and was supposed to be fixed by kernel 2.6.32, yet here it is. What can I do?
One suggestion has been to disable/enable USB legacy support in the BIOS. It is enabled by default. If I disable it, the installer doesn't load. This keyboard works fine on other Linux machines and on the BIOS in this machine. I read there was a problem with Cherry keyboards and the Squeeze installer. This keyboard is not a Cherry but does have Cherry keyswitches.
View 1 Replies
View Related
Mar 10, 2016
I am trying to clean install Jessie 8.3.0 onto an old PC, where I already have wheezy 7.7 working. I am using the 3 DVD- i386, which passed the integrity check.
Installation goes on smoothly till completing the "Select and Install SW" stage from 1st and 2nd DVD. At this point I get the warning that "Installation step failed, ..", giving the choice to repeat.
When repeated, the process gets completed (without asking for 2nd DVD), the new installation boots normally, but the KDE desktop opens irregularly, with some basic applications missing, and some flaws during certain operations.
The APT does not show any missing/broken link. I tried and repeat the installation with different choices as for kernels and/or desktops, but got the same result. I cannot guess where the problem originates, nor whether it is a known bug of the installer.
View 6 Replies
View Related
Oct 25, 2015
I have Asus Z87-PRO motherboard with i5-4670k and I'm trying to install Debian Testing with 64-bit architecture. My problem is mouse and keyboard (I guess USB in general) stop working after installer get loaded (the last thing I do is choose between text and graphical install). I found a few topics on different forums indicating that I should enable IOMMU (Intel VT-d) option in my bios.
The problem is that Intel k-series processors didn't use to have IOMMU support, so there's nothing I can do about it. I tried changing different bios options like disabling UEFI, enabling xHCI and EHCI with no luck. Passing "iommu=off" or "iommu=soft" to the boot command also doesn't work. However, I have LMDE 2 64-bit live cd (based on Debian Jessie) and it works fine, so I guess my problem may be related to some changes in 4.2 kernel.
View 3 Replies
View Related
Oct 14, 2014
I am currently trying to install Debian Wheezy 7.6 x86_64 on an Intel Server System R2224GZ4GC4, but the Installer doesn’t recognise any of the devices attached to the onboard SATA controller.
Debian Version
Debian Wheezy 7.6 x86_64
Hardware used
Server: Intel Server System R2224GZ4GC4
Motherboard: Intel S2600GZ4
Onboard SATA Controller: Intel Patsburg 4-Port SATA Storage Control Unit (rev 06)
Device on Port 0: Samsung 840 Pro Series SSD
Device on Port 1: Samsung 840 Pro Series SSD
Device on Port 2: Samsung 840 Pro Series SSD
Device on Port 3: Intel 510 Series SSD
While the onboard SATA controller does support so-called “fake RAID,” this ‘feature’ has been disabled (i.e., the BIOS setting “SAS/SATA Capable Controller” is set to “INTEL(R) RSTe”). This is confirmed by the controller during the boot-up URL...Weirdly enough, the Intel 510 Series SSD contains an old system (Debian Squeeze 6.0, Kernel 2.6.35-5-amd64), which can boot and which does recognise all SSDs.
Remedies tried
* I’ve compiled the list of SCSI, SAS and block device related modules that the Squeeze-System, which recognises the SSDs, used and manually loaded these modules during the install process.* I’ve tried to rescan the SCSI bus by:
Code: Select allfor host in /sys/class/scsi_host/*; do echo "- - -" > $host/scan; done* I’ve tried to remove all disks, save for the Intel 510 Serives SSD.* I’ve tried all of the above combined.
View 2 Replies
View Related
Apr 20, 2011
Having trouble installing 'Squeeze' 6.0.1a-amd64-netinst on a new AMD64 system.The installer boots and runs fine until it gets to hard disk detection. Then it hangs for about 20 minutes showing a blue screen, during which time the HDD-activity light flickers every 5 seconds. Eventually it says it can't detect a hard disk, and displays a (longish) list of possible drivers; no idea which, if any, would suit.Anyone else installed (successfully or otherwise) on this combo?
View 3 Replies
View Related
May 6, 2011
I'm trying to install openSuSE 11.4 onto my brand-new Lenovo W520 laptop, using the Intel Rapid Storage Technology (FakeRAID?) controller, ROM version 10.1.0.1008. I have 2 physical 500GB disks configured in a mirror (RAID-1). Everything looks fine, the installation program comes up and asks if I want to use mdadm to manage the RAID, to which I answer yes. I go through the normal setup screens, and select the partition layout that I want (for sake of this post, I'll limit myself to the layout that the system itself recommends).
The problem comes when it becomes time to format the partitions. Somehow the partitioning program gets it into it's head that the root partition is 10TB, not 20GB, and the ext4 partitioning fails in various ways (short reads to sector zero, unable to map using 4096 byte sectors, etc, etc) depending on exactly which partitioning scheme I'm attempting. I pretty much get the same result no matter how I play the partitions, which file systems I use (XFS, ext4, etc [of course, I can't use XFS for /boot...]).
For now I've gone ahead and set myself up using software RAID, since this system is unlikely to become dual-boot with Windows for a few years at least. (As an aside, but as a hint to others, when the installation fails, I end up having to go back into the Intel RAID controller BIOS boot to clear out the entire RAID setup each time it fails - the disks are left in a completely useless state).
View 5 Replies
View Related
Jan 23, 2009
I am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....
[Code]....
View 7 Replies
View Related
Dec 1, 2010
when I finally wanted to install Debian to my hardrive. Somehow, how to copy it to USB drive and make it boot-able. Installation process started without problems, but it failed on step called (something like) "Find files in CD-ROM" - what was expectable, since I used USB drive. So I wanted to unmount "/cdrom" and mount my USB drive there instead. I moved to another terminal, and searched for right device. "ls /dev" does not help, since I can't scroll to see other devices. Also kernel messages - can't scroll. Tried to change keyboard layout, still didn't work. I also can't use less, because there is no apt-get installed. Another problem is, that after trying to mount only viewable device (/dev/sda1), mount failed bacause I gave there invalid argument, or directory didn't exist. (Note that I created directory in /mnt/... or /media/... first). So I am asking - how can I remap keyboard to use those page up/down keys?
View 12 Replies
View Related
Feb 7, 2010
Whenever I try to install Ubuntu 9.10 x64 from a Live CD the installer freezes or quits when trying to partition the drive. I tried booting into the Live environment and using GParted but that would only let me make a ReiserFS partition without crashing. With the Reiser partition I tried the installation program again but this time the installer froze when trying to install the files.
My system specs are:
AMD Athlon 64 X2 6000+ (3.0GHz)
4GB RAM
500GB SATA2 HDD
ATI Radeon HD 4770
Currently it also has a second SATA2 HDD with Windows 7 installed but I disconnect this during installations
View 4 Replies
View Related
Apr 23, 2010
I tried to install 64bit 10.04 Release Candidate but it fails every time. I have been using 64bit 9.10 Karmic on this computer so it's suitable for installation.
I tried to install from USB stick and from CD but same error at the same point! It fails just befere it starts to ask your locations etc...
There must be something totally wrong on installer. Checksums are ok etc...
Errors seen with CD and USB stick installation: Pop up: "Istalltion failed The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again."
On command line I can see following error message on CD:
These errors with USB stick:
View 9 Replies
View Related
Jun 12, 2009
When using the manual partitioner on the fedora 11 installer on the live cd, both for 64 bit and 32 bit, it will not allow me to create a new partition. I understand that I have four primary partitions and it cannot have more than that, so I tried deleting one of the partitions, then creating the new ext4 partition for F11. It still fails and gives me the same bugsee attachment)
how to read this, especially since there is so much there. I see at the top it says that there are 4 primary partitions, could it possibly still be seeing 4 primary partitions when trying to create the new one, even though I am deleting one of them? Other than this, I truly have no idea what else I can do.
EDIT: Attachment wont load up for some reason, here is some of the error file:
anaconda 11.5.0.59-1.fc11 exception report
Traceback (most recent call first):
File "/usr/lib64/python2.6/site-packages/parted/disk.py", line 183, in addPartition
constraint.getPedConstraint())
[Code]....
View 5 Replies
View Related
Jan 31, 2010
I'm facing a problem installing Fedora 12 x64 on my desktop.I've been trying to get the Graphical Installer (anaconda) to run, in vain. The error message I get is reproduced below:
Code:
(EE) [drm] drmOpen failed
(EE) NOUVEAU(0): [drm] error opening the drm
[code]....
View 1 Replies
View Related
Feb 7, 2010
The Install program is failing to see the hard disk!
Now heres the really weird bit. The live cd can see the drive just fine.
I have created partitions using gparted and the disktool also sees the drive just fine but as soon as I go back to the installer it shows no hard disk!
It's a SATA drive which I suspect might be a part of the problem.
Is there a way I can install without the install program?
Is there a way to make the install program see the drive?
This is ubuntu 9.10 desktop.
View 2 Replies
View Related
Sep 2, 2010
I am trying to install Ubuntu as a secondary operating system on my Windows 7 PC.
System specs as follows:
AMD Athlon II X4 620 Processor 2.6 Ghz
4.00 GB RAM
ATI Radeon 4600 series video card
I downloaded the 32-bit ISO image from ubuntu.com and burned it to a CD. When I try to boot, I get a purple splash screen with a couple of icons on the bottom. Shortly thereafter, I get another screen that says Ubuntu and has 5 dots on it that change color from red to white in sequence. During this time, my CD drive is active. After a very long time, the drive goes quiet and I get an error that the installer can't find the username or password. I don't remember the exact text of the error message. The system was hung and required a hard boot to recover.
Reading these forums, I rebooted the computer and this time pressed the escape key once the display had changed to the Ubuntu with the dots. The username/password error came up quickly and was followed by several "Bus error" messages. I ejected the CD and restarted the computer in order to come here for enlightenment. I'm reasonably good with Windows but a total neophyte when it comes to Linux. I'm going to try it again and this time record the exact error message (which is what I should've done initially).
[Code]....
View 8 Replies
View Related
Feb 23, 2009
I am trying to install Fedora Core 10 64bit on my Desktop... i've been running FC7 on it until now.The installer continues until the Anaconda GUI, and I am able to click next on language select, then when I click to select "U. S. English" as the keyboard layout and press NEXT, the installer hangs. I ran the disk verification at the start and it passed, so can't be a corrupted installation disk.I can move to the other terminals away from the Anaconda GUI Installer, and in one
Code:
INFO: moving (1) to step welcome
INFO: moving (1) to step language
[code]....
View 5 Replies
View Related
Feb 3, 2011
So I decided to reinstall my 10.10 to undo the 'encrypted home folder feature.' I know are other ways to undo the encryption, but for various reasons I'd rather just do a quick reinstall and start fresh.Currently, I dual boot linux and windows, each with their respective partitions. There is also a storage partition that is fat32 to swap files between the two OSes. So the partitions are:
[Code]...
View 5 Replies
View Related
May 7, 2010
I was trying to install Ubuntu 10.04 (desktop) on my old PC. But it keeps stopping after I selected keyboard(never leaves this screen).
What can I do? The PC is able to run XP, but I hoped that I could speed up things a bit by using Ubuntu.
View 3 Replies
View Related
Sep 10, 2009
I am attempting to install Fedora 11 on a Dell Windows Server 2003 computer from CD (I just want to override the Server PC with F11). I used this media in my class last night after testing it, so I know the media itself is good. We did have lots of issues getting the keyboard and mouse to work during the install attempts last night, too, but eventually it worked. Unfortunately, at home is a different story!
I boot from install Disk 1 and get to the first screen with the option of testing the media or skipping it and I only get one keystroke then nothing. F11 just hangs/stops/freezes/locks up. Reboots don't help and I attempted to install from the F11 DVD I made, too, but the machine completely wouldn't see that disk at all! The keyboard is connected directly to the computer via PS2. I don't have a USB keyboard laying around nor an adapter to try.
I would love to hook up my children with F11! I did manage to figure out what files to download, burn to disk and how to install F11 at school yesterday).
View 2 Replies
View Related
Aug 31, 2010
Suspend works about 50% of the time on my T400. The other 50% of the time, the screen goes blank (light stays on), there is a blinking cursor in the top left, and the "moon" light blinks forever.
I've got the latest ATI (3470?) video driver installed. I've seen a few posts about this but no clear solution. Anyone here have this problem and (more importantly) been able to fix it?
View 5 Replies
View Related
May 17, 2010
I installed Ubuntu 10.04 LTS to dual boot with Win Xp and everything went fine with the installation untill I went to boot back into Windows. My keyboard fails to respond in the boot loader so I am stuck with the default setting of booting back into Linux. To be clear, the keyboard works when the BIOS loads, I can hit DEL and go to the BIOS menu, etc, it's only when I hit the boot loader. The keyboard also works fine in Linux and Windows.
View 2 Replies
View Related
May 2, 2011
I want to install NVIDIA drivers on my Debian Squeeze so that I can use parallel computing packages like CUDA C or OpenCL for my Master Thesis. I have NVIDIA Geforce 310M.
I found a link in wiki.debian which gives me two ways to install NVIDIA drivers and I want to install the NVIDIA way (non-debian way).I have to stop 'X' and I stopped it by typing 'service gdm3 stop' and then I went to ''init 3'' . Now I want run
'sh /home/swaroop/Downloads/NVIDIA-Linux-x86-270-41.06.run' but its not working.
View 14 Replies
View Related
Mar 31, 2011
My broadcom wireless device is of model BCM4313 and I dont find the way to install the drivers.
View 4 Replies
View Related
Aug 19, 2015
I tried to install Debian 8.1 on Lenovo Edge 125, but on stage ''detecting network hardware' of install process my laptop stopped and froze, so I don't know what to do. (Previously I've installed Debian 6 or 7 on this laptop and every thing was OK).
View 6 Replies
View Related
Jun 2, 2010
I've one lenovo 3000 g430 4152 laptop on which i have windows but previously installed debian 5.03 and for enabling the wireless i've to download broadcom b43legacy and install it by compiling because the backports kernel doesn't work with lenovo and after installing debian accidently switched of the wireless by the slide button on laptop
but on next boot i was not able to enable the wireless either by the slide button or fn+f5 which is the key for enabling it the wireless then on some forum i got advise that i can only re-enable by installing windows because lenovo drivers are available for only windows for this model... my question is that is there any solution for it in debian and also there is one more problem that i've to press fn+f8 twice on each boot for enabling the touchpad...
View 1 Replies
View Related
Jul 5, 2015
I've installed Ubuntu lots of times on my UEFI computer without any troubles. The last few days, I've been trying to install Debian Jessie on my computer. I do the steps bellow:
- Download the corresponding iso (amd64).
- Create a UEFI bootable USB drive with Rufus.
- With Safe boot, Fast boot and CSM disabled, I boot to the USB drive.
I expect to see something like this:
But what I get is this:
I'm using an Asus PC. GL550JK. The UEFI version is 205 (from Asus Support website).
Things I've tried:
- Booting with CSM on => Same behaviour. It's not my intention to install debian with CSM on, though.
- Using Wheezy instead of Jessi => Same behaviour.
View 5 Replies
View Related
Mar 6, 2010
I tried to boot the net installer (debian-504-amd64-netinst.iso) from a flash drive (installed with dd). When I tried to boot that, my BIOS skipped the flash drive, which I had set the flash drive as the first boot device. So, I put it on a CDRW, and got the same result. I also tried the offline installer (debian-504-amd64-CD-1.iso) using both of those methods, with the same results. I verified the MD5SUM of this download. I am installing on a computer with a 64 bit Pentium 4 Prescott, if it matters. I have no other working OS on the computer. What other options do I have? Or am I doing something wrong?
View 8 Replies
View Related
May 11, 2011
I'm having a problem with my debian installation; I am using the debian testing / wheezy weekly build CD, and despite using the full 650MB CD, and checking the CD to see that X, gnome, etc is all on there, it seems to insist on just downloading every single package from the internet - the CD doesn't even spin up during the 'select and install software' stage
This wouldn't be that much of a problem, except whenever I choose to use the graphical environment, it downloads all the packages, installs half and then says 'an installation step failed'!. And as it has to download the full set of packages from the net (rather than the CD) it gets a bit tiresome waiting 2+ hours for all the packages to download (I have fast internet, but the debian server doesn't feed data that fast).
And, the reason I am installing the graphical environment is that, although the installer recognises the network card, once you boot into the freshly installed system, it doesn't recognise the network card at all, and trying to bring it up just says 'eth0 not ready'!. So I want to get the graphical environment to make wireless easier to install, since the drivers for that are present, but wpa_supplicant isn't!
I'm tempted to just go and get Linux Mint Debian Edition... but I should be able to at least *install* Debian? (on a side note, I can't see what I'm doing wrong, since you can't really go wrong with the installer - it just seems to fail itself each time!).
how to make the installation faster by getting the installer to use the CD full of packages that I downloaded, rather than downloading the from the net each time, and also how to (1) find out *what* happened (the expert mode just says a step failed and that is it), and (2) to either get round it at the time, or prevent it happening somehow?. I installed Debian in 2007 on another laptop and that worked, but I then moved to Ubuntu as I wanted some newer software...... Ubuntu has been great until 11.04 which seems so full of bugs it isn't funny, so it is time to go back to Debian, if only I could get it installed!
View 6 Replies
View Related
Sep 10, 2010
Well I've been trying to get suse 11.x up on antec media center and run mythtv on top of the platform. Only one thing "partially" missing is the sound. I hope that I'm not annoying anybody by posting this on the wrong site but hopefully somebody will give my directions on that or if there are something that I forgot to mention. I'm lost here and I hope somebody has the same problem and a solution to this problem ! Problem. Mythtv, xawtv and tvtime all display picture close to 100%. Sound start as 100% ok but after 30s - 100s gets lot of white noise in it.
[code]...
I don't get any error messages or dmesg on this so nothing there.
View 1 Replies
View Related
