OpenSUSE Install :: KDE Dekstop Does Not Automatic Start?
May 26, 2010
I got my problem with KDE Desktop. I'm using openSUSE 11.2 and KDE 4.4, when I make updates to my YaST repositories. I am a full file system usage in. / then I delete the file / var / tmp, because large files up to 4 GB. KDE Desktop then I could not run ranymore.
I was googling and found KDE/KDE4 - openSUSE when I try to execute this command:
kbuildsycoca4
kquitapp plasma-desktop> / dev / null 2> & 1
kstart plasma-desktop &> / dev / null 2> & 1
KDE Desktop can run normally but does not like the first time before the crash. And my KDE Desktop not automatic start.
Where an i found log from KDE DEsktop. I had searched on /var/log/messages, /var/log/kdm.
And how the best solution if I want to restore OPensuse.?
View 1 Replies
ADVERTISEMENT
Nov 17, 2010
OpenSUSE have Dolphin as default filebrowser, but if i plugin an USB Memory Stick it automatic open Nautilus. How can i change this to Dolphin?
View 1 Replies
View Related
Jul 31, 2010
YaST2 now does not have an "Online Update Configuration" anymore.Where are we supposed to setup automatic update installation? In Gnome there is an item for this in the Gnome Update Applet, but there is nothing equivalent in the KDE Updater Applet.
View 9 Replies
View Related
Dec 23, 2009
I enabled Automatic Online Updates in opensuse 11.2, and set the frequency to "Daily", but after 24 hours I haven't seen an update. It may be because I had YaST still running and maybe the installed software database was locked.At any rate,ow can I verify that Automatic Online Updates are scheduled?
View 4 Replies
View Related
Dec 13, 2010
I have a machine I have already installed 11.3 on. How do I set it so it has a automatic login for a specific user into the KDE desktop? I looked in YAST but didn't see anything obvious to enable that behavior.
View 1 Replies
View Related
Apr 15, 2011
im reinstalling 11.4 on my laptop and I can't seem to get past the automatic configuration. It installed perfect earlier, and I'm not sure its freezing this time.
View 9 Replies
View Related
Dec 21, 2009
I have managed to install SUSE 11.1 linux on an old ACER laptop. Everything works great unless I use the automatic install update tool. As soon as I do this the computer refuses to boot, it just gets stuck even on safe boot. What is going on ?
View 3 Replies
View Related
Apr 8, 2010
I bought a new HP printer and had to install the latest HPLIP version. I had to compile it and install it from source. In order to avoid interferences with the installed version, I had first removed the installed version. But now Yast wants to re-install this old version with any package installation or upgrade because it sees unresolved dependencies. How can I stop it to add this packages? Or how can I tell Yast that the hplip packages are installed?
View 3 Replies
View Related
Jun 20, 2010
I'm creating my custom distro in SuseStudio, but I want to automatic login, but it says is is not supported in SLE10. But it has a scripts tab..Is it possible to create a script that creates automatic login
View 4 Replies
View Related
Oct 28, 2010
my friend updated kernel today and it "stopped working" and I was asked to fix it he is new to linux, and I don't have physical access to that notebook from what I know main problems are:
1. no network devices exist (except for loopback)
2. sound card driver is missing (nVidia MCP79)
3. in grub menu after choosing new kernel uname -r sais the old one's version
wifi card is atheros, but I don't know specific model.
View 5 Replies
View Related
May 21, 2011
in the last few days, Kpackagekit, which I use to update my system (openSUSE 11.4) had some difficulties to
1. install updates for flashplugin, because whenever you accept the license, Kpackagekit closes, and starts from beginning = a never ending cycle is started
2. fetch updates from Packman. It always throws a message with connection timeout - in Zypper and YaST no such problem occurs
Thats why I have fiddled around in YaST online update and found a feature "automatic online update". For that you need an extra package yast-online-update-configuration. I installed it and configured it to do automatic Updates.
So now I have a question on how it works. Because I have some additional repos activated: KDE updated Apps, KDE extra and the KDE release 4.6 repo, which brings the most recent KDE updates for KDE 4.6.
These repos have priority 90 whereas all the other repos - Packman, OSS, Non-OSS, Contrib etc. have prio 99.
Will YaST install all the updates from KDE with this setup? I am asking, because when I did online updates in Yast before, with prio 99 for the KDE repos, it did not update them, unless I choosed, "Packages --> update all, if newer version is available". I would like to set Kpackagekit into silent and just stick with YaST for that, but have an automatic system update.
View 4 Replies
View Related
Jan 23, 2010
I just used the repair tool (automatic) after doing a clean install of Suse and my Windows directory has disappeared altogether. Any chance of getting it back?
Here's the readout:
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x6eb5ef98
Device Boot Start End Blocks Id System
/dev/sdb1 1 31481 252864504 7 HPFS/NTFS
/dev/sdb2 * 31482 60482 232950532+ f W95 Ext'd (LBA)
/dev/sdb3 60483 60802 2560000 7 HPFS/NTFS
/dev/sdb5 31482 31743 2104483+ 82 Linux swap / Solaris
/dev/sdb6 31744 34354 20972826 83 Linux
/dev/sdb7 34355 60482 209873128+ 83 Linux
View 9 Replies
View Related
Aug 22, 2010
I had some issues with my system hanging on the automatic configuration of the install so I searched the web for the issue. After reading this thread: Hangs at end of SuSe 11 install I used acpi=off apm=off nolapci as the install options and it worked. My question is, do I need to add those options to the /grub/menu.lst or will the install do that?
View 9 Replies
View Related
May 27, 2010
I install lirc and want to prgram irxevent start automatic when the system start
Code:
System->Preferences->Startup Applications
Add an item,but that not works every time,means sometimes cannot work.
View 2 Replies
View Related
Jul 21, 2010
Can anyone tell me how to have Apache automatically start when I boot the system (and log in)?
It is a simple home-PC running Fedora and I put Apache on for internal/local use only (so I can get to it from my Windows box).
Right now, I have to su (to root) and run the Apache startup command.
I'd like to have it simply come up when I log-in.
View 6 Replies
View Related
Nov 17, 2015
How to enable automatic logon to the desktop Debian after turning on the computer?
View 2 Replies
View Related
May 17, 2010
I'm loging my slackware as a simple user After each reboot I need to start cupsd for my printer nfsd and mountd to export my shared directories I use init 4 for my desktop I would like these services to start always without the konsol and the command lines.
View 8 Replies
View Related
Nov 29, 2009
I want to install suse 11.x on a diskless node. The suse repository has been copied from the install DVD to /srv/ftp/suse on my suse 11.1 server. This directory is NFS exported. DHCP and atftp have been installed and the files initrc, linux, and pxelinux.0 are in /srv/tftp. I'm using atftpd and DHCP. Booting my diskless node runs initrc and linux. The IP address is correctly assigned based on the dhcpd.conf file. The suse install GUI is started. When it runs "Probe hard disk" a popup appears with "Error - no hard disk found". When it gets to Suggested Partioning it says "No automatic proposal possible". I can manually assign /srv/tftp/pxelinux.cfg to / but then it says "bootloader cannot be installed on NFS partition". Then the install fails. I've tried this with SusE 11.1 and 11.2, with the same results. Is there a simple option in the default file that I'm missing? Do I need a ramdisk? Do I need to recompile the kernel to get support for NFS booting? What do the "class pxe" and "class "etherboot" entries in dhcpd.conf do?
[code]...
View 2 Replies
View Related
Aug 28, 2010
i finished installing oracle 11g r2 with EM but i cant find any good script that will close the database completely before rebooting they all start it correctly but for the shutdown they don't wait and the database restart in recovery mode
View 3 Replies
View Related
Feb 18, 2011
I need a download manager that automatic start download at 2 a.m and stop in 8 a.m . I test many app such as
fatrat
d4x
....
but can not find app like idm in linux.
View 2 Replies
View Related
Apr 12, 2011
I have some problem with Apache2 Server that hold my login screen to stop showing login screen, I need to enter the dekstop via
1.Alt+Ctl+F1,
2.sudo service gdm-stop
3.startx
By Mistake I deleted some library files to fix the above issue and got much worse as many of my dekstop icon seems to be removed for ever and many not responding to my clicks
I need to a have a fresh Gnome Dekstop
View 1 Replies
View Related
Dec 24, 2010
If I understand correctly Ubuntu does not allow a wifi connection until a user loges in. That makes it so that prey (see preyproject.com) cannot send notices until someone has logged onto Ubuntu.what I would like to do (but I have no clue how) is to set up a user account that automatically, in the background, logs on at start up. Then this little user login would establish any Internet connection that is possible (wifi or lan) and start the program 'prey'. This should all be totally transparent to the user that would just see the regular log in screen.
View 4 Replies
View Related
Jun 9, 2011
after installing Debian, I typed the command:
Quote:
update-rc.d -f exim4 remove
to avoid automatic start of this mail server (I use qmail). After several months, I did a reboot and exim is started! Looking at the history, I found this command:
Quote: dpkg-reconfigure exim4-config
Maybe this command has restored the init script of exim?
View 1 Replies
View Related
Apr 1, 2010
I opened Braser, clicked Copy Disc... I'm trying to copy my CD to an ISO file on my Desktop. Instead, it says this
Code:
The image could not be created at the specified location. Do you want to specify another location for this session or retry with the current location?
You do not have the required permissions to use this drive.
View 7 Replies
View Related
Nov 4, 2010
Does someone know how to create desktop shortcuts to programs (e.g to rdesktop) to all users on Ubuntu 10.04 ?Where (in which file) do I put the shortcut so it will appare (clickable) on the dekstop for all users logging into the machine
View 1 Replies
View Related
Mar 30, 2011
I did a NMAP on a 10.4 desktop system. Found tcp wrapper on my system with an open port. Again I do not run a server. etc/host-deny and etc/host-allow contain no active elements. I know tcp wrapper as a great tool to secure a server. Closing the port with ufw gives no result, tcp wrapper still show up.
View 6 Replies
View Related
Mar 30, 2011
I tried to open the Open the Laptop I found the I could not find my Login Screen, I can watch my mouse scrolling around and when hit power key show me restart, herbinernate .etc, I tried to log in into console by pressing ALT+CNL+F4, and when typed startx it showed me following error
Fatal Server error:
Server is already active for display 0
If this server is no running remove /tmp/.X0-lock
and start again
Xinit: Resource temporarly unavailable (errno 11): unable to connect to X server
Xinit : No such process (Errno 3): server error
View 2 Replies
View Related
Jul 4, 2011
I set up opensuse 11.4. I updated nvidia 6600 drivers from vendor. Everything is good until automatic kernel update. When I start the system, opensuse is not open with this lines.
/etc/rc.status: line 1: /bin/ash : no such file or directory
bash: ./etc/sysconfig/chron : cannot execute binary file
X_MOUSE_CURSOR : Undefined variable
[code]....
View 3 Replies
View Related
Jul 18, 2011
I have an 1TB hard drive, half of it for Windows XP SP3, another half for OpenSUSE 11.4. After installing OpenSUSE, it didn't take me much time to notice that there was something wrong with KDE: sometimes it loaded quite fast, as expected, but most of the time I'd have to wait around 1 minute in that loading screen. Then I updated the kernel, as well as KDE itself, but that didn't solve the problem.
After that I tried to start the system using Enlightnment, and it was lightning fast compared to KDE, however, I didn't quite like its interface, and for some reason GNOME refused to start. All that was too frustrating to me, so I gave up and have been using Windows for the last few weeks. Got sick of it now and here I am on OpenSUSE again. Oh, it feels sooo much better! BUT, I'm still with the same problem.
My specs are as follow:
Motherboard: Gigabyte MA78GM-S2H (with updated BIOS, version F11)
Processor: AMD Phenom X3 8450
Memory: 2GB
Videocard: Nvidia Geforce 8500GT (using NVIDIA proprietary drivers)
OpenSUSE 11.4
KDE 4.6.0
Did I forget anything important?
Ps.: I didn't have these problems with Mandriva 2010.2, which, if I'm correct, used the same KDE version.
View 9 Replies
View Related
Jun 18, 2010
I have just visited this page here, Updating openSUSE - openSUSE I have been trying to update my OpenSuSE system for a week now and I have absolutely no idea what causes this problem. The update would start but would stop right in the middle and refuse to install some pulseaudio(...) package... It would indicate that network is down while I am sure it is up.
I am behind a proxy and I have again and again made sure that the proxy settings are correct and alright. Since it downloads some of the packages in the start I believe my connection and settings are OK. Maybe the SuSE server is down, but not for a whole week, I don't think so. I would also like to mention that I have only tried updating through YaST GUI and I am, as of yet, unaware of any console or command-line methods of updating.
I really would like to update my system because I happen to be paranoid in matters of computer security. (Just kidding) But since I cannot install any updates it should mean I might have problem installing new software. So my digital life is literally crippled because of this problem.
View 9 Replies
View Related
