YaST2 now does not have an "Online Update Configuration" anymore.Where are we supposed to setup automatic update installation? In Gnome there is an item for this in the Gnome Update Applet, but there is nothing equivalent in the KDE Updater Applet.
View 9 RepliesI enabled Automatic Online Updates in opensuse 11.2, and set the frequency to "Daily", but after 24 hours I haven't seen an update. It may be because I had YaST still running and maybe the installed software database was locked.At any rate,ow can I verify that Automatic Online Updates are scheduled?
View 4 Replies View RelatedI have managed to install SUSE 11.1 linux on an old ACER laptop. Everything works great unless I use the automatic install update tool. As soon as I do this the computer refuses to boot, it just gets stuck even on safe boot. What is going on ?
View 3 Replies View Relatedmy friend updated kernel today and it "stopped working" and I was asked to fix it he is new to linux, and I don't have physical access to that notebook from what I know main problems are:
1. no network devices exist (except for loopback)
2. sound card driver is missing (nVidia MCP79)
3. in grub menu after choosing new kernel uname -r sais the old one's version
wifi card is atheros, but I don't know specific model.
in the last few days, Kpackagekit, which I use to update my system (openSUSE 11.4) had some difficulties to
1. install updates for flashplugin, because whenever you accept the license, Kpackagekit closes, and starts from beginning = a never ending cycle is started
2. fetch updates from Packman. It always throws a message with connection timeout - in Zypper and YaST no such problem occurs
Thats why I have fiddled around in YaST online update and found a feature "automatic online update". For that you need an extra package yast-online-update-configuration. I installed it and configured it to do automatic Updates.
So now I have a question on how it works. Because I have some additional repos activated: KDE updated Apps, KDE extra and the KDE release 4.6 repo, which brings the most recent KDE updates for KDE 4.6.
These repos have priority 90 whereas all the other repos - Packman, OSS, Non-OSS, Contrib etc. have prio 99.
Will YaST install all the updates from KDE with this setup? I am asking, because when I did online updates in Yast before, with prio 99 for the KDE repos, it did not update them, unless I choosed, "Packages --> update all, if newer version is available". I would like to set Kpackagekit into silent and just stick with YaST for that, but have an automatic system update.
I installed from scratch 11.2, but i see now that the Automatic update doesn't work. I run "Refresh" on Updater Applet and it come up with an error: PackageKit Error repo-not-available:
View 9 Replies View RelatedFor the past few days, the automatic GUI update has been crashing, complaining of a "Transaction error."
Here is the output that pops up in a separate window:
Code:
I tried the following:
Code:
And got the following (similar) output:
Code:
I very rarely use xfce and I don't quite know what exo is, but I'd like to fix this problem if it's not too involved.
I got my problem with KDE Desktop. I'm using openSUSE 11.2 and KDE 4.4, when I make updates to my YaST repositories. I am a full file system usage in. / then I delete the file / var / tmp, because large files up to 4 GB. KDE Desktop then I could not run ranymore.
I was googling and found KDE/KDE4 - openSUSE when I try to execute this command:
kbuildsycoca4
kquitapp plasma-desktop> / dev / null 2> & 1
kstart plasma-desktop &> / dev / null 2> & 1
KDE Desktop can run normally but does not like the first time before the crash. And my KDE Desktop not automatic start.
Where an i found log from KDE DEsktop. I had searched on /var/log/messages, /var/log/kdm.
And how the best solution if I want to restore OPensuse.?
I have a machine I have already installed 11.3 on. How do I set it so it has a automatic login for a specific user into the KDE desktop? I looked in YAST but didn't see anything obvious to enable that behavior.
View 1 Replies View Relatedim reinstalling 11.4 on my laptop and I can't seem to get past the automatic configuration. It installed perfect earlier, and I'm not sure its freezing this time.
View 9 Replies View RelatedI bought a new HP printer and had to install the latest HPLIP version. I had to compile it and install it from source. In order to avoid interferences with the installed version, I had first removed the installed version. But now Yast wants to re-install this old version with any package installation or upgrade because it sees unresolved dependencies. How can I stop it to add this packages? Or how can I tell Yast that the hplip packages are installed?
View 3 Replies View RelatedI'm creating my custom distro in SuseStudio, but I want to automatic login, but it says is is not supported in SLE10. But it has a scripts tab..Is it possible to create a script that creates automatic login
View 4 Replies View RelatedI just used the repair tool (automatic) after doing a clean install of Suse and my Windows directory has disappeared altogether. Any chance of getting it back?
Here's the readout:
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x6eb5ef98
Device Boot Start End Blocks Id System
/dev/sdb1 1 31481 252864504 7 HPFS/NTFS
/dev/sdb2 * 31482 60482 232950532+ f W95 Ext'd (LBA)
/dev/sdb3 60483 60802 2560000 7 HPFS/NTFS
/dev/sdb5 31482 31743 2104483+ 82 Linux swap / Solaris
/dev/sdb6 31744 34354 20972826 83 Linux
/dev/sdb7 34355 60482 209873128+ 83 Linux
I had some issues with my system hanging on the automatic configuration of the install so I searched the web for the issue. After reading this thread: Hangs at end of SuSe 11 install I used acpi=off apm=off nolapci as the install options and it worked. My question is, do I need to add those options to the /grub/menu.lst or will the install do that?
View 9 Replies View Relatedi am a new opensuse user from vietnam. I installed opensuse 11.3 last week, and i have a serious problem with repo. I can't enter it . It's mean i can't update (by update applet), install codec, new software, .
View 1 Replies View RelatedI want to install suse 11.x on a diskless node. The suse repository has been copied from the install DVD to /srv/ftp/suse on my suse 11.1 server. This directory is NFS exported. DHCP and atftp have been installed and the files initrc, linux, and pxelinux.0 are in /srv/tftp. I'm using atftpd and DHCP. Booting my diskless node runs initrc and linux. The IP address is correctly assigned based on the dhcpd.conf file. The suse install GUI is started. When it runs "Probe hard disk" a popup appears with "Error - no hard disk found". When it gets to Suggested Partioning it says "No automatic proposal possible". I can manually assign /srv/tftp/pxelinux.cfg to / but then it says "bootloader cannot be installed on NFS partition". Then the install fails. I've tried this with SusE 11.1 and 11.2, with the same results. Is there a simple option in the default file that I'm missing? Do I need a ramdisk? Do I need to recompile the kernel to get support for NFS booting? What do the "class pxe" and "class "etherboot" entries in dhcpd.conf do?
[code]...
can someone please confirm or correct my understanding of automatic upgrades in F14:as far as i currently understand the automatic update mechanism in F14 it works the following way:
1.) PackageKit (packagekitd) periodically checks for updates using YUM as it's backend and displays a nice icon in the tray to inform the user when upgrades are available.
2.) PackageKit (packagekitd) only runs when a user needs it and terminates afterward. When a interactive Desktop session is running, packagekitd is always running because it's spawned by the session manager.
3.) When using a console only system (without X) or when nobody is logging in on the local graphical console for a longer time i need yum-checkupdates for configuring automatic upgrades (same as done per default in CentOS).
I have Ubuntu Lucid and am wondering how to have the wallpapers in the Background tab of the Appearances dialog box update automatically when I add a wallpaper to /usr/share/backgrounds. Or should I be putting them somewhere else for this to happen? I have several accounts on my computer and can't go into each account and manually update whenever I add a wallpaper
View 3 Replies View RelatedI've been using Lubuntu for the last 4-5 months as a virtual web server, for developing Joomla sites. I have been extremely happy with it so far. (Runs with ~300MB memory just fine)A few days ago I installed some updates and the next time I rebooted the login screen was different and I couldn't log in to the graphical environment any more.I hit Ctrl+Alt+F2 I can log in to the console bu
View 3 Replies View Relatedwhen I launch Yast2 - Online Update, I get an error during the repository refresh that it could refresh the repository.Since it's easier to copy-paste - here is the output from 'zypper ref' with the same error:
Code:
Retrieving repository 'Updates for openSUSE 11.3 11.3-1.82' metadata [|]
Failed to download ./repodata/cefcc9d56264aa169f70a53c560ffc39cb6af575-deltainfo.xml.gz
from http://download.opensuse.org/update/11.3/
A[code]...
I've just installed debian sid and see that I've the kernel 2.6.32. I was a bit surprise as on ubuntu I had the 2.6.35 and debian sid is supposed to be more up to date that ubuntu (maybe I'm wrong).So I checked what were the packages available :
mart@mart-laptop:~$ uname -a
Linux mart-laptop 2.6.32-5-686-bigmem #1 SMP Sat Oct 30 23:25:58 UTC 2010 i686 GNU/Linux
mart@mart-laptop:~$ sudo aptitude search ^linux-image
[code]...
So, I logged into my laptop this morning and tried to run a VirtualBox VM and it barked that I had not setup the kernel module yet. I found this odd since I was running it fine yesterday... so I was poking around my system and noticed that there was a yum update yesterday
Code:
Jun 07 14:03:21 Updated: 1:gdm-3.0.4-1.fc15.x86_64
Jun 07 14:03:22 Updated: 1:gdm-plugin-fingerprint-3.0.4-1.fc15.x86_64
Jun 07 14:03:35 Installed: kernel-debug-devel-2.6.38.7-30.fc15.x86_64
Jun 07 14:03:37 Updated: kernel-headers-2.6.38.7-30.fc15.x86_64
[Code]......
Ubuntu 10.04 performed an automatic update today which required a reboot afterwards. The reboot took me into a shell "GNU GRUB version 1.98-1ubuntu6", rather than the usual grub boot menu.
View 2 Replies View Relatedi have recently configured squid with dansguardian. Squid was running on a whitelist mode, meaning i deny every single traffic, and allow traffic that matches with what i allow only.
this however, introduced a problem where i have to manually update the list of sites allowed for kids, which is not efficient. is there any websites where i can use' wget' to download recommended websites for kids, and plug it into the list of allowed websites.
or I'm thinking that maybe if there's some way to write a script where it will automatically add the search results to the list, from reliable search engines like www.kidrex.org.
I should have know, it's named after a windows "feature".On my laptop (Acer Aspire 5310) Fedora 10 offered me an automatic update to Fedora 11. Because I trust any automatic update Fedora brings to me (it's tested right) I automatically pressed yes. It started some downloads and everything seems to run pretty smooth. Then I had to reboot the computer, press that button as well.... and it reboots into Fedora 10 (untill the end of the bar). After that I have no clue what happens, because before X is started I get a black screen with nothing on it, even ESC doesn't do anything :O I don't even get the "_" to indicate the laptop is doing anything.
View 3 Replies View RelatedI have a kind o Kubuntu-Studio 9.10
I installed from Ubuntu Karmic minimal, so i did install KDE.
i have update-manager-kde, update-notifier-kde and kpackage kit installed. for manual installing i use synaptic though.
in the repositry-manager the automatic updates are anabled (daily).
but it is not checking for updates. i checked manually in synaptic, and there are updates available.
so, how do i let it check automaticly for updates?
I run a few dozen dedicated web servers all running CentOS 5.5. A long time ago when one server was apparently compromised, I was urgently advised to sign in to the server and run "yum update" at least once a week to ensure that everything which I had installed using "yum", would get updated with any recently available updates, including security fixes, and that one reason I might have been hacked before was because I hadn't been doing that.
So, I'm still not sure if that would have prevented the original break-in, or how much this has reduced my chances of being hacked, but I've been faithfully signing in to each server every week for the past few months and running "yum udpate". Most times, this results in a lot of patches being downloaded and applied, so it's clear the machines are not doing it automatically. I figure it's about time to learn how to make the machines do this on their own. Is there a standard way to make "yum update" run automatically, every day, or every week? Yes, I'm sure there are many ways to do it, but is there a single way used by the majority of webmasters of CentOS sites who have automatic updates set up? Googling a bit for "make yum updates automatic" turned up some threads like:
[code]...
in which people describe writing their own custom scripts to do yum update automatically. This seems odd. It seems like the kind of thing that there would be a standard way to turn on. Also, is there a reason that virtually every newly provisioned dedicated server does not have "yum update" set up to recur automatically? If it's true that people break into websites using exploits that have been found in older versions of webservers and other software, and that sometimes these breakins would have been prevented by the newest patches, wouldn't it reduce the number of websites being compromised if the OS had yum updates turned on automatically by default?
After running a large update and rebooting a few weeks ago, I found that my internet connection had stopped working. My internal network still worked fine though, so it I know it's not the card itself or its configuration. After a bit of trial and error I discovered that simply running dhclient brings the connection up again, so it appears that something is interfering with the initial dhcp update to my ISP (or something like that; I'm no expert in this area. ) My usual policy in cases like this is to wait through two or three updates in the hopes that it's just a temporary problem, but it's been a while now and subsequent updates haven't fixed it.
I've tried looking around, but I can't come up with search criteria specific enough to narrow it down to my specific situation. I'm not even sure where to begin looking to diagnose the problem, nor do I know which package update(s) could've affected it. I'm not sure what might be useful, but here's the relevant entry in /etc/network/interfaces. I have it configured with a static internal address, with my router as the gateway.
Code:
# The primary network interface
mapping eth0
script grep
map eth0
[code].....
I am using Ubuntu 8.04. Most of my Administration functions have stopped working. If I click on Hardware Drivers, Hardware Testing, Log In Window, Software Sources, Synaptic Package Manager, and Windows Wireless Drivers my pointer turns into the timer wheel, so I know it is working, but then it just disappears and nothing happens. When I click on Update Manager my computer freezes. If I try to update through the red Updates Available arrow at the top of my screen my computer freezes. I can update through terminal but the red arrow never goes away. I also have 17 updates that won't update. I have tried them one at a time through terminal but they just freeze the computer. The only way to unfreeze it is to shut the computer down.
View 4 Replies View RelatedI did an automatic update and rebooted this morning and I now have a bit of a nightmare situation where I can't open the majority of applications, including the terminal. When I rebooted, my desktop loaded as normal, but then when I try to open the terminal (from Applications -> Accessories or from my quick launch panel), nothing happens other than the quick launch panel disappears for a second then reappears. This is the case for most other apps, but not for Chrome (obviously).
Used Alt+F2 to open the terminal, ran safe upgrade and then rebooted, but still having the same issue. As Ubuntu was booting, there was a "Broken pipe" message, which didn't stop the boot process but is still a bit worrying. I've run a file system check but this hasn't resolved the problem either.