OpenSUSE Install :: After Automatic Kernel Update To 2.6.34.7-0.5.1-desktop?
Oct 28, 2010
my friend updated kernel today and it "stopped working" and I was asked to fix it he is new to linux, and I don't have physical access to that notebook from what I know main problems are:
1. no network devices exist (except for loopback)
2. sound card driver is missing (nVidia MCP79)
3. in grub menu after choosing new kernel uname -r sais the old one's version
wifi card is atheros, but I don't know specific model.
View 5 Replies
ADVERTISEMENT
Dec 5, 2010
On a fresh install 11.3 gnome I am getting an update freeze on the kernel-desktop-2.6.34.7-0.5.1. This is on the initial software update after first log in on fresh system. It downloads the package and freezes during the update and causes all my other updates to reload. I went to init 3 and ran zypper update and saw that it made it to 91% and then stopped. After that I usually get a corrupted install.
View 9 Replies
View Related
Oct 18, 2010
I recently installed 11.3 from DVD Am using Ubuntu Lucid Grub2 bootloader as I have several OS's Updated Grub so that the new kernel version 4 would boot but it boots to a command line... What has happened to my desktop?
View 4 Replies
View Related
Jul 31, 2010
YaST2 now does not have an "Online Update Configuration" anymore.Where are we supposed to setup automatic update installation? In Gnome there is an item for this in the Gnome Update Applet, but there is nothing equivalent in the KDE Updater Applet.
View 9 Replies
View Related
Dec 23, 2009
I enabled Automatic Online Updates in opensuse 11.2, and set the frequency to "Daily", but after 24 hours I haven't seen an update. It may be because I had YaST still running and maybe the installed software database was locked.At any rate,ow can I verify that Automatic Online Updates are scheduled?
View 4 Replies
View Related
Nov 26, 2010
Is there a way to get the matching Linux kernel headers automatic on a regular kernel update via the Ubuntu packed manager? Every time I get a new kernel I must do an aptitude install linux-headers-`uname -r`
View 1 Replies
View Related
Dec 21, 2009
I have managed to install SUSE 11.1 linux on an old ACER laptop. Everything works great unless I use the automatic install update tool. As soon as I do this the computer refuses to boot, it just gets stuck even on safe boot. What is going on ?
View 3 Replies
View Related
May 21, 2011
in the last few days, Kpackagekit, which I use to update my system (openSUSE 11.4) had some difficulties to
1. install updates for flashplugin, because whenever you accept the license, Kpackagekit closes, and starts from beginning = a never ending cycle is started
2. fetch updates from Packman. It always throws a message with connection timeout - in Zypper and YaST no such problem occurs
Thats why I have fiddled around in YaST online update and found a feature "automatic online update". For that you need an extra package yast-online-update-configuration. I installed it and configured it to do automatic Updates.
So now I have a question on how it works. Because I have some additional repos activated: KDE updated Apps, KDE extra and the KDE release 4.6 repo, which brings the most recent KDE updates for KDE 4.6.
These repos have priority 90 whereas all the other repos - Packman, OSS, Non-OSS, Contrib etc. have prio 99.
Will YaST install all the updates from KDE with this setup? I am asking, because when I did online updates in Yast before, with prio 99 for the KDE repos, it did not update them, unless I choosed, "Packages --> update all, if newer version is available". I would like to set Kpackagekit into silent and just stick with YaST for that, but have an automatic system update.
View 4 Replies
View Related
Nov 1, 2010
I've just installed debian sid and see that I've the kernel 2.6.32. I was a bit surprise as on ubuntu I had the 2.6.35 and debian sid is supposed to be more up to date that ubuntu (maybe I'm wrong).So I checked what were the packages available :
mart@mart-laptop:~$ uname -a
Linux mart-laptop 2.6.32-5-686-bigmem #1 SMP Sat Oct 30 23:25:58 UTC 2010 i686 GNU/Linux
mart@mart-laptop:~$ sudo aptitude search ^linux-image
[code]...
View 2 Replies
View Related
Feb 11, 2010
I have a system running openSUSE 11.2 with Desktop and XEN kernel, as well as Windows 7 (not by choice though...). I have noticed a strange time issue, with Windows 7 and the desktop kernel the time is correct (like for example now: 1:32 PM) but in the XEN kernel it is ahead several hours (6:32 PM). If it was an issue between openSUSE and windows then I would think that it is a problem with the system clock but I don't know what would cause a time issue between kernels like that.
View 6 Replies
View Related
Jul 21, 2010
differences between Kernel Default and Kernel Desktop? I've found some past threads like this link and this other link, and some other google info, which suggest the only difference would be the io scheduler. Also, I see the default grub choice is "Desktop" and not "Default", so I take this as a suggestion to prefer one over the other.
However, my broadcom 4312 wireless only works on the "default" and not on the "desktop" kernel, so I guess there must be other differences. I just want to evaluate which one is the less long-term risk option to go.
View 1 Replies
View Related
Sep 9, 2010
I installed the new 2.6.34.4-0.1 security update earlier today. Now, the login screen no longer responds to my keyboard. In particular, I cannot type my password to log in. If I reboot into failsafe mode, the keyboard works and I can log in.
I'm running 11.3 on a white MacBook 4,1.
View 7 Replies
View Related
Apr 28, 2010
I'm having an issue when I'm trying to install SuSE linux onto my desktop.I go through all the steps and everything looks okay, but when it starts to install the packages, I get an error message that basically says:kernel.desktop - unable to install, exit status 127.I have a ATI X1950 video card in the computer, as well as a AMD 64 FX CPU in the system.
View 7 Replies
View Related
Dec 14, 2009
I understand that the new 11.2 version has a new kernel optimized for desktop use. Can someone tell me or show me where I can find the new kernel configuration options? I would like to see what options they choose to change.
View 2 Replies
View Related
Jan 19, 2011
When I installed the suse11.3, I running the "uname -r",the system shows "2.6.34-12-desktop",for some reasons,i need the kernel header for "2.6.34-12-desktop". I down the "kernel-source", "kernel-default" and "kernel-desktop" and I check the "/usr/src/" path, but only have these stuff "linux-2.6.34.7-0.7 linux-2.6.34.7-0.7-obj linux-obj", where can I get the kernel -header for "2.6.34-12-desktop".
View 9 Replies
View Related
Jan 28, 2011
Never thought much about it until now a but is it possible to get the desktop kernel at install with 11.3 DVD ? I always get default-kernel and have to do the kernel dance to get the desktop-kernel I prefer. I'm familiar with the multiversion = kernel-desktop and methods to retain different versions. Just wondering.
View 8 Replies
View Related
Dec 14, 2009
As the title says. System is openSUSE 11.1 running KDE3.5 with KDE4.3 also installed to use desktop effects in KDE3.5. After update X uses 90% CPU to scroll down a page in FF, OOo or even in text editor, either with KWin and KWin4. With KWin4 desktop effects can't be enabled in system config.
From Xorg.conf:
Code:
Section "Device"
BoardName "ATI Radeon HD 3200 Graphics"
Driver "fglrx"
Identifier "Device[0]"
Option "XAANoOffscreenPixmaps" "true"
Option "Capabilities" "0x00000000"
Option "OpenGLOverlay" "off"
Option "FSAAScale" "0"
Option "FSAAEnable" "off"
Option "VideoOverlay" "on"
Screen 0
VendorName "ATI"
Rolling back to kernel 2.6.27.37 fixed the problem.
View 1 Replies
View Related
Sep 26, 2010
After the lastest update 11.2 also suffers from the problem already reported here for 11.3. I am lucky to have two linux partitions and was actualy able to boot into the second partition. From this second system I could repair this or at least a quick-n-dirty fallback to be able to boot.
1. Copied the 2.6.21.12-0.2 version for initrd and vmlinuz from /boot to /first_partition/boot
2. Copied the /first_partition/boot/grub/menu.lst.old to /first_partition/boot/grub/menu.lst to reset to the old menu.
After boot the system could start but modules were not loaded.
3. copied /lib/modules/2.6.31.12-0.2-desktop from the second partition to the first.
4. The same for /usr/src/linux-2.6.31.12-0.2*
Now my system will boot and start modules such as network and sound. Still, was this correct? I don't know for sure if there are some issues that I haven't discovered yet. And obviously, what will happen with future updates (either kernel or other)?
View 4 Replies
View Related
Apr 15, 2011
I'm trying to figure out how to update the kernel in 11.4 from the repository. I have the stable repo added, but i'm not sure how to get it updated.
View 9 Replies
View Related
Jan 28, 2010
After migrating from openSUSE-11.1 to openSUSE-11.2 together with a few further online updates including a kernel upgrade to 2.6.31.8-0.1-desktop, my system started freezing a couple of times for two days.
I made up my mind googling for "linux freeze", found a hint saying, that 2.6.31.8 causes trouble, fell back to 2.6.31.5-0.1-desktop, and voila: the problem is gone. What a relief!
The following describes my system:
View 4 Replies
View Related
Feb 10, 2010
Finally got around to updating from 2.6.31.8 and was surprised at the slew of warnings issued during the install. Rather than post them here, see:
pastebin - Someone - post number 1792805
I would have bet money that the machine wouldn't boot after this, but it in fact did (whew). Since the kmp modules were not updated with this new kernel, I have merely suspicions....any one have the real reason for these warnings? Same type of warnings occured (thou I didn't copy the output) when I installed the ATI prop driver rpm. everything seems to work as normal so far, but it was so very different than many previous updates that I'm a bit leery.
View 3 Replies
View Related
Oct 29, 2010
A few upgrades ago, I had also a desktop-kernel installed. I tried starting with the standard and the desktop kernel, but could not see a difference. Why this desktop-kernel and what's the difference with the standard kernel?
HP laptop with Intel(R) Core(TM)2 CPU T5600 - OpenSUSE 11.3 -KDE4.4.4
View 2 Replies
View Related
Mar 24, 2011
I just updated to new 2.6.38-18 kernel and headers. Now the latest Ati 11.2 driver wont install completely and I cannot get any X. So I removed the ati drivers to use the opensuse drivers but kde wont start now (dont know what the issue is.. maybe someone can poitn me out the the correct log file to look for errors).. I am using gnome now. Anyone knows how to get ground this and install ati drivers.
View 9 Replies
View Related
Jan 18, 2010
After upgrading kernel, system (AMD 780G)refuses to start in graphic mode. Computer services running fine, but there's nothing or some trash on screen when X started. And no way how to get out except restarting or shutting down from remote computer.
Reinstalling, unistalling ATI driver doesn't help. Also manipulations with xorg.conf (install, safe etc previous file versions)doesn't help.
Sax2 detects videocard correctly, but result is same regardless which resolution@Hz is specified.
In logfiles I just can find this
Jan 19 04:12:55 www kdm_config[4226]: Multiple occurrences of key 'UseTheme' in section [X-*-Greeter] of /usr/share/kde4/config/kdm/kdmrc
Jan 19 04:12:55 www kdm[4225]: X server died during startup
Jan 19 04:12:55 www kdm[4225]: X server for display :0 cannot be started, session disabled
View 9 Replies
View Related
Jan 20, 2010
the normal auto updater ran and installed a new kernel for security vulnerability and it was a .pae version. So after restart I now have 4 options on the boot screen, which includes the normal "SUSE" and a 'SUSE pae" version. defaulted to the new pae version and booted up. I got the video definition not found and had to enter a value manually. The system comes up but not into x system. It gives me a login prompt and startx yields a "terminal not found." Ran SaX2 and startx now works. Unfortunately my KDE desktop is messed up now. There are none of the normal "taskbar" at boot up started processes there. So what should I have done? how do I get my system back to normal and roll out the new kernel and all these changes?
View 6 Replies
View Related
Jul 22, 2010
Since the update to 11.3 i'm getting kernel panics randomly. Because the X server freezes and I can only force an "unexpected reboot", there is not much information I have. I installed kdump and activated it with the Yast module. I'm collecting dump files, now. But I'm not sure what to do with does files.
View 7 Replies
View Related
Sep 8, 2010
I updated the Kernel to 2.6.34.4-0.1-desktop. First problem was in order to do that I had to uninstall ndiswrapper. Now I have multiple entries in the bootloader, the default, the desktop, and the openSUSE 11.3 -2.6.34-12. Since I am new to linux what am I suppose to do with all those entries?
View 9 Replies
View Related
Sep 13, 2010
After reading this article openSUSE News - Forum Users Benefit from openSUSE KDE Repository I added that KDE repo to yast and switched all packages.
After rebooting it says (failsafe kernel configuration says the same):
Kernel panic - not syncing: VFS:
Unable to mount root fs on unknown block (0,0)
And stops at this string: "[<c0203826>] kernel_thread_helper+0x6/0x10" and capslock light is blinking.
View 8 Replies
View Related
Jan 4, 2010
I installed from scratch 11.2, but i see now that the Automatic update doesn't work. I run "Refresh" on Updater Applet and it come up with an error: PackageKit Error repo-not-available:
View 9 Replies
View Related
Sep 25, 2010
I was doing a kernel update and can no longer boot into 11.3. I am dual booting with XP. I get Grub screen but no longer see Suse as a boot option, only Windows. I have tried to reinstall, but for some reason I can't get it to boot with DVD. So, is there a way that I can repair my computer without doing a reinstall?
View 9 Replies
View Related
