OpenSUSE Install :: How To Enter To Suse After Installing Windows 7
Sep 4, 2010
I bought a new laptop in which a Linux Suse Enterprise Desktop is installed,After that, I installed Windows 7 by the common method: Using Gparted CD, but the problem is that after the end of the installing of Windows 7, the latter became as the first only OS installed in, and the grub of Linux Suse has been disabled , and the only way to enable the grab (in order to use dual-boot, switch between Suse and Win7) is to use the Linux Suse CD and enter to it for enter some prompt command (as u know), but I didn't get the CD with the attached pack, I got instead of it, a System Recovery CD, the only option shown in the first page is to restore the system and not to enter it
Hence my question: How can I enter to linuxSuse to enable the grub to activate the dual-boot?Can't I enable the dual-boot from command line of Windows 7?
I've ordered and received the beautiful 4 disk set for release 11.2 that came on DVD. Like so many Linux users I would like to load it on an older Windows XP box without DVD drive. Haven't seen this release offered on CD's. I've been able to copy it via network to a file on the box, but have no idea which files belong on which CD - I assume it will take 7 or 8 disks like many of the older releases. Don't want to buy a DVD drive for the old box .
This is the 1st time I am installing SUSE and I wanted to clear some of my doubts:I have the following computer specs:Core i32 GB RAM320 GB HDDATI Mobility Radeon 43301. Is creating a swap partition necessary while installing Suse 11.2?2. Will I be able to install 64-bit version of Suse on my computer?3. Will I be able to run Windows 7 side by side?4. Will I have any compatibility issues with my Display Adapter since I have had problems previously on Ubuntu with my onboard ATi Graphics..
Before installing OpenSUSE I shrunk my Win 7 partition down in half, then created 3 partitions out of the new free space for /root, /home and /swap. I installed opensuse and when it got to the bootloader section I kept getting Grub error 17 - cannot mount selected partition, and so on. I made sure it was writing to the MBR and also into /boot if that makes a difference, but I did get a prompt that said YaST couldn't make changes to /dev/sda (I'm paraphrasing and can't remember the exact error message). At the moment I have suse installed and my windows partition intact, but no bootloader (not even windows one) so all I can do is boot to Live CD.
Below is the output of fdisk -l. There's quite a few more partitions than it's showing, sda3, sda4 and sda5 are my /home, /root, /swap and the other ones are windows partitions, like the system recovery along with the win7 install. During the suse install I formatted the home and root partitions with ext4 filesystem.
My question to the community is should I preform a fresh install of OpenSuSe 11.2 or upgrade my current version of OpenSuSe 11.1? As of current I just use my system to surf the web check, email and Basic Business needs. The specs of my Laptop are:
OS Information OS: Linux 2.6.25.20-0.4-default i686 Current user: jraglin@Jada System: openSUSE 11.1 (i586) KDE: 3.5.9 "release 49.1"
well, gonna straight-explain what I`ve here: had a Win7 64bit installed machine and created a D drive as I was intended to install Suse there (so it`s `Extended`) after succesfully installed SLED and finally restarted the laptop to see use Win7 again there was no Loader for me to choose which Operation System (I have another machine with XP,Ubuntu and Pardus - never had sucha problem)then I had to chose SLED of course but this time it didn`t bring me to the login page but to the Command Line of SLED, and the thing is that I can`t use command line on linux. tried several times and with failsafe login but stıll having command line and there is no Win7 to run on Loader.
I can't seem to boot to windows xp after installation and then update from the openSUSE 11.1 live cd. This is my /boot/grub/menu.lst
Code:
# Modified by YaST2. Last modification on Sun Apr 19 19:35:24 WEST 2009 default 0 timeout 8 ##YaST - generic_mbr
[code]...
/dev/sda1 boots fine to the system restore from Acer. when selecting Windows option on boot menu it simply flickers and returns to the menu. /dev/sda3 is non bootable, symply filesystem. When using boot loader settings from YasT I go to other and press "Propose new configuration" it changes the menu but when pressing OK it asks for a floppy disk and doesn't save the configuration (so on new boot I return to the same).
I used Win7 and Suse, but now Win7 was exhausted by virus and I'm going to use only Suse. DO you know how to install Suse for my computer such that use only Suse < Del win7> . If I do that so I have to coppy all my datas ??? and how should I create partition ?
I have installed windows 7 in my laptop. i have only c drive with a memory space of 284mb. now i like to install suse 11 in c drive itself without distrubing windows 7. after installing i should be able to go for either windows 7 or suse 11 easily. i must have the both. I had partitioned windows 7 in fat. i had not use ntfs.
i have Windows XP and OpenSuse on my harddrive (dualboot) my problem is i cannot see my Windows-partitions when running Suse, i need to have access to those partitions and i cannot find how to do that.
I need a new OS and heard about Suse for the longest time and wanted to give it a go. It's gonna be hard to let go of Win 2k, but with support degrading I need a OS that's rock stable like 2k. My main concern is application compatibility so I can run my current windows app in Suse. Ultimately I would want a multiboot so I don't lose windows 2k.
I'm using a IBM Thinkpad T61 with these configurations: T9300(2.5GHz), 4GB RAM, Cricual SSD 120GB, 14.1in 1440x900 LCD, 128MB nVIDIA Quadro NVS 140M, CDRW/DVDRW, Intel 802.11abgn, Modem, 1Gb Ether, UltraNav, Sec Chip, FPR, Camera, Windows 2000 SP4
I have installed Windows 7 Professional (64 bit version), and OpenSuse 11.2 (64 bit) on to a newly built Core i5 machine. I installed Windows first, with 3 partitions. The 100MB partition Windows reserves, a C: drive for the operating system and a D: drive for data. Both of these are NTFS partitions. I then installed OpenSuse into the unallocated section at the end of the new disk drive. The Linux partitioner showed OpenSuse in an extended partition, containing a swap / /home and /tmp partition. Both operating systems now appear to be working fine, but I'm worried about the Windows Disk Manager showing that the OpenSuse partions are primary ones, and are not inside an extended partition. It only shows a small amount of unallocated space at the end of the drive as being in an extended partition.
Should I delete OpenSuse and start again? Perhaps creating an extended partition with Windows before trying to reinstall OpenSuse?If I leave the disk as it is, is it likely to continue to dual boot without something unstable occuring? It may just be a Windows problem which will not be fatal, but I'm worried all my files may get scrambled at a some point in the future.
I wanted to try openSuse alongside with Windows Vista and Ubuntu. During the installation Suse wanted to delete my Windows partition. Of course I denied and stopped this installation, but now when starting my computer, the boot menu gives Vista, Ubuntu and Suse as a choice, but if I choose Vista, the Suse installation process is starting instead of Windows, there is no way to get Windows started (fortunately Ubuntu is working so that I can write this message).How can I get Windows starting?
I am installing SUSE 11.2, and went with the default options, now it reached the point of "Windows Domain Membership". At job I do not remember the right names, so I tried some but I get an error message which says "cannot use the group "WORKGROUP" for Linux authentication", etc.So I would like to avoid windows authentication, but at this point I do not see this option. I can only try domain names or abort the installation. What could I do here in order to finish the installation without windows memebership?
recently I've installed Opensuse 11.4 dual booting beside windows 7 . now I want to restore windows 7 boot to remove OpenSuse 11.4 ...I've tried many ways to remove grub and restore window's boot . I tried bootrec /fixmbr and bootrec /fixboot but in when it comes to the last step it says (cannot find system path )I also tried nt60sys method to restore windows boot and it failed 2 sound like the grub installed is rock solid one
As the thread-title reads I'm looking for an app that helps me to create a bootable usb-stick with Windows XP on it for my girlfriend who wants to dualboot Windows for school work.Is there any app that fulfills my need? Or am I forced to use the command-line with fdisk or something? (an in case, what should I do?)
I recently bought a portable with a Windows 7 system.I want to install openSUSE 11.3 but I also want to keep Windows 7 - so I need to install a dual boot system.On my desktop I have GRUB with Windows XP and openSUSE 11.3 and all works fine.How do I proceed ? I did not find much documentation yet, but maybe I looked in the wrong places.
What just happened was that I was experiencing some serious blue screen errors in Windows all of a sudden, so I loaded up my recovery partition for windows, and ran the "Restore complete system function". At some point, it had to restart, and I got the BIOS error "Unable to detect operating system". Eventually I got openSUSE to work again by reinstalling it using my DVD. However, now, whenever I load my windows partition, I get a windows error that says it cannot configure Windows on my hardware! The furthest it gets is a blue Windows screen that says "Please wait while Windows continues to configure your hardware."
My windows version is Vista, and I use openSUSE 11.3 as my primary partition. My question is this: How can I re-install Windows onto my partition? I have a recovery partition setup still, but I'm afraid that the Restore Complete System function will mess with my linux partitions again!
All I want Windows for is to play WoW! Running WoW through Wine is fail on my laptop for some reason, its far too slow and problematic. Please help me... some Linux forums just trashed me for using Windows at all, but its my only option available for my particular spec of computer to play this game, so that type of advice doesn't help me much. Feasible alternatives to a Windows partition would be nice, but Wine clearly doesn't work for me like I desire.
This is a problem when Windows is running some malware that cannot be removed, which happens all the time. The problem is all the new hardware or specialized hardware will not work on Linux so Windows is the only choice. I would think the latest versions of Linux would have this problem worked out by now. I installed 11.3 one week ago, only to find that the repair option in the install menu no longer exists so don't bother uses this link to reload the GRUB HowTo Boot into openSUSE when it won't Boot from the Grub Code on the Hard Drive. I also tried this link Re-Install Grub Quickly with Parted Magic which does not work either. On step 2 typing grub returns the error message "grub command not found". You can use GRUB if you boot the install DVD and select Rescue Boot. However when you type find /boot/grub/menu.lst the error message "file not found" is returned.
I did the following to restore my GRUB boot record. Boot the install DVD and select the update option during installation. Change all the repositories to enable except the NVIDIA repository, it is not responding at this time. When the system comes up go into Yast and open the boot loader. It should have your original boot menu in memory. Change the default to another option and re-write the MBR. This will write a new MBR using the original data updated with your new default. Re-boot and then change your default back. I am just a NewBe so this may not be exactly correct but I hope it saves someone like me some time fixing a MBR re-writing by the Windows installer.
I have Windows 7 and Slackware on my laptop, but I reinstall Windows 7 and now I cannot enter at Slackware ( I don't have anymore start screen to choose OS). Do I need to install again Slackware or just lilo and how to do that?
I was using Firefox 3.6 on Suse 11.1, but I have just reinstalled my root partition and now have Firefox 3.0.4. Firefox immediately warned me to install 3.6. I have downloaded a tar.b2, but I have no idea how to install it. Is it possible to do it through Yast? If I need to use Konsole, please can I have instructions and also where I need to put it. I really need to have it installed as I use a plugin which is now not working with Firefox 3.0.4
I get this error when I boot opensuse default and fail safe. It takes me to a console log in, which works. This happened after new kernel install in Linux Mint, which is unbootable atm. I can boot windows, bsd but no Linux.
Whenever i'm trying to install apps via one click install or any other way, it later demands i insert the OpenSuse 11.4 CD into the drive, otherwise it won't install.
I have tried to compile Aircrack -ng in Opensuse 11.2 I have received the following output
linux-z7wt:/home/jcaser/aircrack-ng-1.1 # make make -C src all make[1]: se ingresa al directorio `/home/jcaser/aircrack-ng-1.1/src' make -C osdep make[2]: se ingresa al directorio `/home/jcaser/aircrack-ng-1.1/src/osdep' Building for Linux
