As the thread-title reads I'm looking for an app that helps me to create a bootable usb-stick with Windows XP on it for my girlfriend who wants to dualboot Windows for school work.Is there any app that fulfills my need? Or am I forced to use the command-line with fdisk or something? (an in case, what should I do?)
View 2 RepliesThe thread's title is very eloquent:I have a Windows 7 ISO image and I would like to "burn" it on a bootable USB pen in order to install it on a netbook.Obviously I am on openSUSE, and all I read so far was instructions to burn an opensuse or any linux distros (the "dd" tales)
View 2 Replies View RelatedI've put openSUSE several times in USB flash drives. I've used the old method with dd ... and the new one with dd_rescue ..., shown in SDB:Live USB stick - openSUSE This way a partition is created (sdb1 or sdc1 or ...), with the Linux file system (ID: 83). One of the problems of this system is that all the data of the pendrive is deleted. Another problem is that sometimes openSUSE doesn't load completely and I cannot use it. And another of the problems is that even if I create another partition (for example to make the Live USB persistent and "remember" the configuration of my computer) and I put some of my photos, songs, films there when I plug the pendrive in a computer running Windows XP I cannot access the data. (What about Vista and 7?)
Other Linux distros can be put in pendrives using the FAT file system (for example W95 FAT32 (LBA), ID: c). This way my personal data or files (photos, documents, ...) can be opened from a computer running Windows XP (and the personal data is not erased when putting the Linux in the pendrive). So I would like to know how to create a Live USB drive with personal files that are avaiable for many Operating Systems, including Windows XP. Perhaps the solution is to put openSUSE in a FAT file system, or put it in Linux file system but create another partition with FAT file system (for this openSUSE should avoid the 1st partition, sdX1, that should be for the personal data, so Windows XP can access it).
Since playing games on Ubuntu is a pain, I've decided to sacrifice a few GB's to install Windows 7 on another partition. Is there any tool for Ubuntu to make USB sticks bootable? I've tried UNetbootin, but that's just for Linux distributions. I use Ubuntu 10.04 64Bit and want to install Windows Home Premium 64Bit, in case it's important...
View 9 Replies View RelatedI'm installing 11.3 from USB stick. I went through the partition screen, etc and it did not mention anything about any data or other stuff on the harddisk. but when I got to the "Live Installation Settings" page, it shows the booting sections as:
+ openSUSE 11.3 (default)
+ openSUSE 11.2 - 2.6.31.12-0.2 (/dev/sdb2)
+ Linux Other
+ Failsafe -- openSUSE 11.3
how do I blow those others away? I want them erased aand don't want them in grub or "installed around", rather, I want it "installed over" them. Also, the "Linux Other" is the USB stick. Is it a problem to have that?
I'm about to ditch Freenas as my NAS software and make it an Ubuntu server box. The mainboard is an Asus AT3ION-T dual core Atom board. Freenas runs happily from USB stick. I have no optical device to install Ubuntu from and would like to install Ubuntu Server to a USB stick.
View 8 Replies View RelatedI bought a new laptop in which a Linux Suse Enterprise Desktop is installed,After that, I installed Windows 7 by the common method: Using Gparted CD, but the problem is that after the end of the installing of Windows 7, the latter became as the first only OS installed in, and the grub of Linux Suse has been disabled , and the only way to enable the grab (in order to use dual-boot, switch between Suse and Win7) is to use the Linux Suse CD and enter to it for enter some prompt command (as u know), but I didn't get the CD with the attached pack, I got instead of it, a System Recovery CD, the only option shown in the first page is to restore the system and not to enter it
Hence my question: How can I enter to linuxSuse to enable the grub to activate the dual-boot?Can't I enable the dual-boot from command line of Windows 7?
recently I've installed Opensuse 11.4 dual booting beside windows 7 . now I want to restore windows 7 boot to remove OpenSuse 11.4 ...I've tried many ways to remove grub and restore window's boot . I tried bootrec /fixmbr and bootrec /fixboot but in when it comes to the last step it says (cannot find system path )I also tried nt60sys method to restore windows boot and it failed 2 sound like the grub installed is rock solid one
View 1 Replies View Relatedi am using mint 10 and windows 7.i want to add opensuse 11.4 to that.is there any chance to do this?i don't want to use virtual box.
View 3 Replies View RelatedI recently bought a portable with a Windows 7 system.I want to install openSUSE 11.3 but I also want to keep Windows 7 - so I need to install a dual boot system.On my desktop I have GRUB with Windows XP and openSUSE 11.3 and all works fine.How do I proceed ? I did not find much documentation yet, but maybe I looked in the wrong places.
View 7 Replies View RelatedWhat just happened was that I was experiencing some serious blue screen errors in Windows all of a sudden, so I loaded up my recovery partition for windows, and ran the "Restore complete system function". At some point, it had to restart, and I got the BIOS error "Unable to detect operating system". Eventually I got openSUSE to work again by reinstalling it using my DVD. However, now, whenever I load my windows partition, I get a windows error that says it cannot configure Windows on my hardware! The furthest it gets is a blue Windows screen that says "Please wait while Windows continues to configure your hardware."
My windows version is Vista, and I use openSUSE 11.3 as my primary partition. My question is this: How can I re-install Windows onto my partition? I have a recovery partition setup still, but I'm afraid that the Restore Complete System function will mess with my linux partitions again!
All I want Windows for is to play WoW! Running WoW through Wine is fail on my laptop for some reason, its far too slow and problematic. Please help me... some Linux forums just trashed me for using Windows at all, but its my only option available for my particular spec of computer to play this game, so that type of advice doesn't help me much. Feasible alternatives to a Windows partition would be nice, but Wine clearly doesn't work for me like I desire.
This is a problem when Windows is running some malware that cannot be removed, which happens all the time. The problem is all the new hardware or specialized hardware will not work on Linux so Windows is the only choice. I would think the latest versions of Linux would have this problem worked out by now. I installed 11.3 one week ago, only to find that the repair option in the install menu no longer exists so don't bother uses this link to reload the GRUB HowTo Boot into openSUSE when it won't Boot from the Grub Code on the Hard Drive. I also tried this link Re-Install Grub Quickly with Parted Magic which does not work either. On step 2 typing grub returns the error message "grub command not found". You can use GRUB if you boot the install DVD and select Rescue Boot. However when you type find /boot/grub/menu.lst the error message "file not found" is returned.
I did the following to restore my GRUB boot record. Boot the install DVD and select the update option during installation. Change all the repositories to enable except the NVIDIA repository, it is not responding at this time. When the system comes up go into Yast and open the boot loader. It should have your original boot menu in memory. Change the default to another option and re-write the MBR. This will write a new MBR using the original data updated with your new default. Re-boot and then change your default back. I am just a NewBe so this may not be exactly correct but I hope it saves someone like me some time fixing a MBR re-writing by the Windows installer.
I need to install the scripts of angstrom distribution
ie ARM gcc..................how to install the scrpits from the site [url]
I would like to have the option to install winxp or ubuntu from the same 4gb drive. Is there any easy way to do this?
View 2 Replies View RelatedIf its possible to install Windows XP using Ubuntu 10.04 Lucid Lynx, i want to install it to my second Partition cause i need it to play games.
I already tried Nlite, Unetbootin and WinSetupFromUsb and nothing did work for me.
I can only install it with my USB because i dont have a CD Drive.
I got my WindowsXP at my Harddrive as an .ISO file.
I no longer have access to a Windows machine.
I have been trying for days now to successfully create a usb bootable Windows XP install, but without success.
So, is it possible ? If so, HOW ?
Tools used so far without success:
UNetbootin
And
Startup Disk Creator.
How do i install vmware tools on 11.2? I uninstalled the open-vmtools non-sense removed the remaining modules from it (no clean work from suse here) installed gcc, make, kernel-source and kernel-headers installed the vmware-tools rpm i started vmware-configure-tools and it says that my kernel was built with gcc 4.4.1 while i try to use version 4.4 now.(if i do a 'gcc -v' it clearly says version 4.4.1) so what ?! I said "yes" here, it tries to build the memory moudle and fails......
View 9 Replies View RelatedWhen i update package sax2-tools to version 8.1-618.1, from Xorg repository 11.2, it autimatically offers to delete the following packages:
sax2
sax2-gui
sax2-ident
sax2-libsax
sax2-libsax-perl
Dont know if this is a wanted behaviour.
I am trying open suse for the first time and i want to install it on a usb stick this it is the latest version
View 9 Replies View RelatedI have done a big big mistake (I could beat myself up for that) with my netbook and now I am sitting here, not getting openSUSE installed on it.
I wanted to try another netbook linux and installed (more by accident than intentionally) Easy Peasy Linux. This system is not bad, but cannot work with the wireless adapter in my netbook. However, I then wanted to install openSUSE 11.4 again, which ran fine on the netbook. But the install always gets stuck in different stages and I donīt know why.
Sometimes a failure message comes up: "filesystem is read only, rebooting in 120 seconds", but I am not really sure if this is for the harddrive or the usb stick. In other occasions, the bootprocess until install gets stuck at "starting KDM". Nothing happens then... thats it.
I already have reformatted the usb stick and copied the openSUSE Live CD via Imagewriter on it again... no success.
So now I am really confused, because I donīt know if there is something wrong with the harddrive? Or is it the stick itself? How can I find this out?
If it is the harddrive, how can I at least refomat it? Remember: no CD or DVD drive, just USB stick...
How can I find out if the image on the stick is ok? I already tested the install media and it said: "checksum ok"
It used to be that the dvd menu offered an option to "repair the installed system". THis was really very convenient. The openSUSE 11.3 dvd for x86 now only gives a "system rescue" option which leads to command line directl. Where have been "the repair the installed system" tools? How can we access them now? What is a reasonable set of tips that's supposed to be used after logging into "system rescue"?
View 9 Replies View RelatedI have read lots about KDE (4.xx) freeze on OpenSuse 11.3 Live. Well I have experienced it first hand.
My hard disk which had Opensuse 11.3 (reiserfs) crashed. It was a dual boot and a windows upgrade wiped out the partition information. I am still trying to resuce with dd-rescue.
Now in the meanwhile I burnt a opensuse 11.3 Live CD and worked on it for a week. I was bit annoyed that every too often the cd drive spins....so I decided to burn a usb stick. Its a 2 gb USB stick. I followed the instructions to the toto to burn the ISO image. Then my nightmares started
The USB STICK boot was smooth. However when the desktop starts ...the trouble begins. I clicked on firefox...after about 10 seconds I experienced the dreaded freeze first. I had to reboot the system.
Everything was fine till i started Firefox, the system froze. Now reboot -> start -> firefox --> freeze cycle continued. I got fed up.
I then downloaded google-chrome. Installed it (after updating a couple of drivers) . It worked flawless. I loaded it with graphics...still no problem. Then started firefox .. the system froze. I even disabled all KDE windows animation, set only one window pane, still there is a freeze.
I took my USB stick off and rebooted the system though live CD. I started firefox on boot, NO problems. Opened many many tabs. Still no problem.
So there is a SURE problem with USB + Firefox. I SUSPECT IT MORE DUE TO NETWORK ISSUES THAN GUI (DRIVER) ISSUE. If it were to be GUI driver issue firefox should have fozen both with CD and USB.
Mine is pentium duo processor machine with 2gb RAM (DDR2). Intel chipset for video. I checked the MD5 of downloaded ISO its matched the one on the site. So the iso image is flawless.
All the threads in this regard suspect the video drivers, but I ALSO suspect the network. May be there is a wait() state in the network driver that is holding the process for way too long causing the freeze. Somebody needs to check this up.
The freeze is on USB stick boot only and not on CD boot.
I'm currently having troubles upgrading my 11.1 system. My SuSE running 11.3 had crashed, and when I tried to reinstall it I couldn't find the cd. I only have a 11.1 distro cd, in which I had installed. I want to upgrade to 11.2 since that should be the easiest, from then I think i can figure out how to upgrade from 11.4. I currently do not have any cd's or a usb flash drive to mount the iso image onto. I've read through the wiki looking for a solution, but even with updating my repos i still haven't found the answer.
how to upgrade from 11.1 to 11.2 without a cd or usb stick.
I have an EeePC 4g netbook which only has a 4Gb hard drive and I thought I would like to install Fedora 13 on an 8 Gb SDHC card and use it to boot the netbook.
As neither the netbook nor I have an optical drive, I made a bootable USB memory stick using Unetbootin which boots the netbook and could be used like a live CD to install Fedora.
On booting with the live USB stick, with the blank SD card in place, and clicking on the install icon, the installation starts but then there are 2 problems; the first is that the installer appears to want to install to both the SD card and also the USB stick. There is a tick in the box beside the USB stick which I can't remove.
I decided to ignore that and put a tick in the box beside the SD card but when it got to the point where it creates partitions it said "Could not find enough free space for automatic partitioning. Please use another partitioning method"
Surely 8 GB is more than enough space for partitioning, so where am I going wrong and why does it want to install on the USB stick as well?
am currently using Windows 7 across my networked PCs at home.
I've just received my new Samsung N250 Plus Netbook which comes with Windows 7 Starter (yuk). I read a post on Ebuyer from someone who has installed ubuntu on his N250 so thought I'd give it a go tonight.
My main concern is whether my wi-fi card (Broadcom 802.11n according to windows) will work when I remove windows and install ubuntu. I intend to use the netbook for internet use only while working abroad.
Is it possible to test it works by running ubuntu from my USB stick first (without removing windows 7)?
I've followed the instructions at Live USB stick - openSUSE for creating a bootable USB stick. I have attempted this with both a 32 bit and 64 bit image. Unfortunately my system will not boot up the stick - it just loads my hard disk as normal.
Background info
1. I have checked the iso images against the checksum and they are ok;
2. I have used the same images to create bootable CDs which work fine;
3. My machine IS capable of booting a USB stick - by copying syslinux onto the stick, the machine does see the stick
4. The order of boot in BIOS is stick first. Again, I have proven this works ok using a utility called USB Boot Tester.
I am unsure what to try next. I recall reading on this forum there was a problem booting from USB stick if the computer also had a CD drive. That was in an early version of LiveCD. Could the problem still be extant? I can't find the actual thread unfortunately otherwise I would link to it.
I created a live USB stick following the instructions at [URL] installing openSUSE-11.2-KDE4-LiveCD-x86_64-iso and booting a Motion LE1700. openSUSE works great but any file I create is lost after I reboot. I created the second partition with the script listed the instructions. Is there any anything else to do to make the live system mount the second partition?
View 5 Replies View RelatedDownloaded openSUSE-11.2-DVD-x86_64.iso Burned on a DVD and used to make an install op a Dell laptop Everything went okay. Now I like to make a install on a ASUS UL20A laptop without an optical drive Placed the iso on a USB stick with dd command The stick can be read by openSUSE 11.2 machine NOT by WIN 7 machine I tried to make the USB stick with Win32DiskImager.exe
View 9 Replies View RelatedCould someone recommend a simple (non-graphical) distribution that fits on a USB stick, boots without HD access, providing the functions of Super Grub Disk. I find the instructions for creating a Super Grub USB confusing. Even the CD version has cryptic operating instructions. Yes I know there is always Knoppix, but it is graphical (slow loading) and lacks the grub manipulating functions.
View 9 Replies View RelatedI downloaded openSUSE 11.3 to my MacBookPro, whose disk drive has been broken for some time now. I want to install to new msi cr610 laptop that shipped WITHOUT windows. I could order the box with an install disk and printed manual, but if there's any way of creating a bootable USB stick from the download I did to my mac, that would be great.
View 3 Replies View Related