OpenSUSE Install :: Restoring Windows 7 Boot After Installing 11.4?

Mar 29, 2011

recently I've installed Opensuse 11.4 dual booting beside windows 7 . now I want to restore windows 7 boot to remove OpenSuse 11.4 ...I've tried many ways to remove grub and restore window's boot . I tried bootrec /fixmbr and bootrec /fixboot but in when it comes to the last step it says (cannot find system path )I also tried nt60sys method to restore windows boot and it failed 2 sound like the grub installed is rock solid one

View 1 Replies


ADVERTISEMENT

OpenSUSE Install :: Restoring Kernel Spew On Boot

Sep 29, 2010

I've recently performed a clean upgrade from 11.0 to 11.3 (wipe / partition to ext4, retain /home disk, swap partition etc.) and everything is fine, installed as Gnome distro with KDE3 from repos.Anyway, I've noticed that SuSE will say "doing fast boot" and suspend any console spew until after the kernel has finished with hardware detection and the like. I'd like to be able to see exactly what's happening with the kernel at boot, as I'm quite paranoid and in the event of system failure etc. it would be difficult to view the logs post-boot. Also, my IDE optical drives have a habit of sometimes only being partially detected due to the power line being somewhat intermittent, and I've seen the kernel attempt to re-stablish a link on 11.0, whereas I'd never be able to see that in 11.3 unless I see the console spew, so it would look like the system hanging on "doing fast boot".

Note: I do not want to disable splash=silent, unless spalsh has another option which will give me the desired functionality. I want to have a silent boot, with the option of going verbose with Esc; it's one of the things that I love about SuSE.Oh, and Grub was a nightmare as usual with disk ordering differing at run-time from config file and the total freeze at "loading stage2", so I had to manually fix that. Why does the installer seemingly ignore or revert the specific options I set for GRUB? I understand that the default options for GRUB are ok for single disk users, but my disk ordering is not overly exotic. I stress that this was not user error, as I've had the same issue from going from 10.2 to 10.3 to 11.0, even though they were clean grub installs (rewrites). /rant.

View 1 Replies View Related

OpenSUSE Install :: Computer Won't Boot After Restoring Image

Jan 31, 2011

I've recently begun using PING (Partimage is not Ghost) imaging software, and it works great with other Linux distros. Upon my first use on openSUSE, I found that I could not restore the image onto another computer. After a successful restoration of the image, I get: "Could not find /dev/mapper/isw_ddedgibjfd_ARRAY_part2 Want to fall back to /dev/mapper/isw_ddedgibjfd_ARRAY_part2? (Y/n)" during the first boot. I don't know what to do, I've tried taking multiple images, and restoring them on multiple computers, but I always get the same error.

View 7 Replies View Related

OpenSUSE Install :: Installing Dual Boot On Windows 7 System

Nov 23, 2010

I recently bought a portable with a Windows 7 system.I want to install openSUSE 11.3 but I also want to keep Windows 7 - so I need to install a dual boot system.On my desktop I have GRUB with Windows XP and openSUSE 11.3 and all works fine.How do I proceed ? I did not find much documentation yet, but maybe I looked in the wrong places.

View 7 Replies View Related

OpenSUSE Install :: GRUB Boot Loader After Re-installing Windows XP ?

Mar 21, 2011

This is a problem when Windows is running some malware that cannot be removed, which happens all the time. The problem is all the new hardware or specialized hardware will not work on Linux so Windows is the only choice. I would think the latest versions of Linux would have this problem worked out by now. I installed 11.3 one week ago, only to find that the repair option in the install menu no longer exists so don't bother uses this link to reload the GRUB HowTo Boot into openSUSE when it won't Boot from the Grub Code on the Hard Drive. I also tried this link Re-Install Grub Quickly with Parted Magic which does not work either. On step 2 typing grub returns the error message "grub command not found". You can use GRUB if you boot the install DVD and select Rescue Boot. However when you type find /boot/grub/menu.lst the error message "file not found" is returned.

I did the following to restore my GRUB boot record. Boot the install DVD and select the update option during installation. Change all the repositories to enable except the NVIDIA repository, it is not responding at this time. When the system comes up go into Yast and open the boot loader. It should have your original boot menu in memory. Change the default to another option and re-write the MBR. This will write a new MBR using the original data updated with your new default. Re-boot and then change your default back. I am just a NewBe so this may not be exactly correct but I hope it saves someone like me some time fixing a MBR re-writing by the Windows installer.

View 1 Replies View Related

Ubuntu :: Restoring Grub After Installing Windows?

Jul 5, 2009

I had to install windows for my sister, and I had a 20gb partition there for backup ( /data/ ), and well, that's where I was going for. After reformatting and installing Windows, I try restoring grub and this is what I get:

Code: grub> root (hd0,5)
grub> setup (hd0)
Checking if "/boot/grub/stage1" exists... yes

[code]...

Probing devices to guess BIOS drives. This may take a long time. /dev/hda: Not found or not a block device. Searching for an alternative way to install it, I found that if I 'installed' Ubuntu over my Ubuntu partition, it would automatically restore grub. But when I get to the partition tables, I get a message saying that "The computer has no operating systems on it" and it considers my hard drive as empty.

View 5 Replies View Related

Debian Configuration :: Restoring Lenny's GRUB After Installing Windows XP Elsewhere?

Feb 21, 2010

My computer initially had one hard drive, with Debian Lenny 5.0.4 installed. I haven't done any special configuration, so upon boot, I was presented with the GRUB kernel select menu, then gdm, etc. I think I used the Debian installer's 'use entire drive with LVM' configuration.

I then added a second hard drive, with the intention of installing Windows XP on it. After I installed XP on this second drive, I found out that it had overwritten the MBR on the first drive. (It was my intention do use the BIOS' F8-key boot menu to choose between the two drives, each with their own distinct boot loader. The two drives and OS's would be completely independent.)

Using my Debian installer CD, I think I have GRUB installed on the first drive again. I've found a number of tutorials which say I can use 'set' and 'linux' to boot the system, but the linux command always returns a file not found error.

I think my LVM filesystem is still intact, as the Debian installer's fdisk reports it, it can also chroot to it and my installation appears to be intact. 'ls' within GRUB shows (derek-swap_1) (derek-root) (hd0) (hd0,1) (hd0,2) (hd1) (hd1,1) (fd0) . 'derek' was the hostname I used.

I would like to simply restore the system to the way it was before: with the standard GRUB that comes with Debian 5.0.4, which then boots into the debian with my LVM filesystem. Is there a way to do this from the Debian installer CD? (I was hoping there would be a 'dummy install' command which would install GRUB and configure it properly, but leave all my existing partitions and filesystems intact.)

View 4 Replies View Related

Ubuntu Installation :: Restoring Grub Failed After Installing Windows XP?

May 21, 2010

I am pretty new to ubuntu, and not sure if this question has been solved by anyone, I tried search this forum, but didn't find enough information. The closest thread I found here was this one:[URL].. Here is my situation, I have installed Ubuntu 9.04 a few days ago with an old Live CD, after running it pretty well, I upgraded it to 9.10 with the online update tool. (I guess this makes sure I was using Grub 1, the legacy Grub). After updated to 9.10, I installed a Windows XP on my hard drive, obviously, it wiped off my Grub from the MBR. So I tried to restore the Grub back to the MBR, but failed, please see below:I first run the fdisk

Code:
ubuntu@ubuntu:~$ sudo fdisk -l
omitting empty partition (5)
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

[Code]...

View 9 Replies View Related

Ubuntu Installation :: Restoring MBR After Windows 7 Install?

Jul 23, 2010

I hope this is the right sub-forum for a question like this. It seemed like the best match from what I could find, but my issue stems from installing Windows 7 after I already had Ubuntu installed. I don't know what details are important, so I'll be as thorough as I can. I was running Ubuntu 9.10 on a machine with two SATA hard drives. I was only using one since Ubuntu kept complaining that the second drive was having some issues. The drive with Ubuntu had only two partitions, one tiny one for the swap and the rest of the hard drive was the second partition.

I needed to install Windows for my work, and since I was not very familiar with the whole partition thing (which is the reason why the hard drive was basically one huge partition) I decided to follow this guide: [URL]... I backed up my important data, I used a live CD to create a new partition for windows, I backed up my MBR using the command given, and installed Windows 7. Everything went pretty smoothly. Now, whenever I boot up I don't get a choice of what OS to boot, it just goes straight to Windows, as expected.

I used the same live CD to restore the MBR using the command given on the guide, but I get this error:
dd: opening `/media/sda/mbr.bin': No such file or directory

[Code]...

View 4 Replies View Related

OpenSUSE Install :: Restoring GRUB From YaST?

Jan 8, 2011

To fix a Windows problem with hibernation, I had to let it overwrite my MBR. I can still boot into openSUSE 11.3 thanks to a wonderful piece of freeware called Plop Boot Manager, but the GRUB menu is no longer in my MBR (obviously).How can I force a rewrite of GRUB to the MBR from YaST?

View 9 Replies View Related

OpenSUSE Install :: How To Enter To Suse After Installing Windows 7

Sep 4, 2010

I bought a new laptop in which a Linux Suse Enterprise Desktop is installed,After that, I installed Windows 7 by the common method: Using Gparted CD, but the problem is that after the end of the installing of Windows 7, the latter became as the first only OS installed in, and the grub of Linux Suse has been disabled , and the only way to enable the grab (in order to use dual-boot, switch between Suse and Win7) is to use the Linux Suse CD and enter to it for enter some prompt command (as u know), but I didn't get the CD with the attached pack, I got instead of it, a System Recovery CD, the only option shown in the first page is to restore the system and not to enter it

Hence my question: How can I enter to linuxSuse to enable the grub to activate the dual-boot?Can't I enable the dual-boot from command line of Windows 7?

View 1 Replies View Related

OpenSUSE Install :: Installing 11.4 Alongside With Mint And Windows 7?

Apr 26, 2011

i am using mint 10 and windows 7.i want to add opensuse 11.4 to that.is there any chance to do this?i don't want to use virtual box.

View 3 Replies View Related

OpenSUSE Install :: Tools For Installing Windows XP Onto USB-stick

May 11, 2011

As the thread-title reads I'm looking for an app that helps me to create a bootable usb-stick with Windows XP on it for my girlfriend who wants to dualboot Windows for school work.Is there any app that fulfills my need? Or am I forced to use the command-line with fdisk or something? (an in case, what should I do?)

View 2 Replies View Related

OpenSUSE Install :: Boot - After Installing New Graphics Drivers OpenSUSE 11.4

Jul 14, 2011

I have installed openSUSE 11.4, and I really like it compared to other linux versions I've tried, but I find it requires a bit more linux know-how.

Being fairly new to linux, it has been quite the effort to learn but I started getting the hang of things via online support and such. Lately I've been having some problems.

I need linux to run a TCAD program, and it requires some openGL functionality and was giving me errors when I tried entering the software related modeling GUI.

Anyhow, I thought it had to do with my graphics drivers, so I decided to update them via ATI proprietary driver. After doing this, the system booted me into the console rather than X.

I tried numerous online guides on how to fix the issues, by running all sorts of boot commands (nomodset), and I read the graphics driver theory, as well as trouble shooting ATI graphics.

In the process, I also installed a radeonhd-xorg11-something through YAST, and that caused a black screen altogether upon boot. I managed to boot into failsafe with x, and from there I removed it via YAST, however this did not resolve issues. I also deleted any xorg.cionf files in hopes that the system will default back to the radeon driver.

As it stands right now, I can only boot into my system via failsafe mode. I'm keeping the unit off for now as it's probably tired from all the hard reboots I had to do . If someone can help me resolve this issue, I can turn it on and enter any commands required, such as finding out the graphics card, the kernel, the driver currently running, etc and I can post it here.

View 9 Replies View Related

OpenSUSE Install :: Restoring Default Graphics Drivers ?

Jan 18, 2010

I've lost my GUI while attempting to install the latest ATI proprietary driver. I followed their instructions on how to uninstall it but it didn't give me my GUI back. How do I get back to the default drivers that came with my installation? I have a Radeon 3850.

Booting into safe mode doesn't give me a GUI.

I want to try to reinstall the ATI proprietary drivers eventually. I have them on the hard drive, but I have had no luck installing them using the CLI so far.

View 4 Replies View Related

OpenSUSE Install :: Restoring GRUB To A LVM Encrypted Computer?

Jul 27, 2010

I am running OpenSUSE 11.3 GNOME, and I recently reinstalled Windows, and it overwrote GRUB. I only have an Ubuntu LiveCD (I installed with the OpenSUSE DVD), how do I get GRUB back? Note that the Ubuntu LiveCD doesn't recognize the LVM Encrypted partition, so I can't mount it.

View 2 Replies View Related

OpenSUSE Install :: Error Re-installing Windows On Existing Partition

Feb 7, 2011

What just happened was that I was experiencing some serious blue screen errors in Windows all of a sudden, so I loaded up my recovery partition for windows, and ran the "Restore complete system function". At some point, it had to restart, and I got the BIOS error "Unable to detect operating system". Eventually I got openSUSE to work again by reinstalling it using my DVD. However, now, whenever I load my windows partition, I get a windows error that says it cannot configure Windows on my hardware! The furthest it gets is a blue Windows screen that says "Please wait while Windows continues to configure your hardware."

My windows version is Vista, and I use openSUSE 11.3 as my primary partition. My question is this: How can I re-install Windows onto my partition? I have a recovery partition setup still, but I'm afraid that the Restore Complete System function will mess with my linux partitions again!

All I want Windows for is to play WoW! Running WoW through Wine is fail on my laptop for some reason, its far too slow and problematic. Please help me... some Linux forums just trashed me for using Windows at all, but its my only option available for my particular spec of computer to play this game, so that type of advice doesn't help me much. Feasible alternatives to a Windows partition would be nice, but Wine clearly doesn't work for me like I desire.

View 4 Replies View Related

OpenSUSE Install :: Can't Boot Into Ubuntu After Installing 11.2

Apr 18, 2010

I've been having trouble booting into Ubuntu 9.10 after installing OpenSUSE 11.2. When I installed it, the opensuse setup detected the partition ubuntu was installed on and added it to the grub menu. I also have windows vista and windows 7 installed and both boot up just fine from the opensuse grub boot menu. The ubuntu installation that i have was an upgrade from 9.04 so I am not using grub2 in that installation.

System Info:
Amd Phenom II X4 810 2.6ghz
4 gb ram
Ubuntu 9.10 64 bit
OpenSUSE 11.2 64 bit

View 3 Replies View Related

OpenSUSE Install :: Not Installing Boot Loader?

Jul 15, 2010

I'm trying to make my iMac "Triple Boot".But using rEFIt as the boot loader, and installing Grub or Lilo makes the "Boot Menu" complicated.

"SO, DO YOU THINK IT'S A GOOD IDEA NOT TO INSTALL "GRUB, LILO, OR OTHER BOOT LOADERS", and just let rEFIt to do the job?

View 4 Replies View Related

OpenSUSE Install :: Restoring The Entire ETC Directory In Similar Hardware?

May 4, 2011

We are looking for a solution that allows us to restore a servers "identity" in the event of hardware failure...ie Name, IP address, dhcpd, named configs etc.

We have ISO images of the appliance images that contains all the software and stuff. There is no real data on these servers.

If we backup the entire ETC directory and perhaps the /var/lib can we simply restore that and get everything back?

What concerns me is how some versions of Suse use UUID for the network config and the mounts points.

View 9 Replies View Related

Install :: Can't Boot Ubuntu After Installing OpenSUSE / Solve It?

Jan 3, 2010

I bought a Linux magazine as a Christmas present attached to it was a 8GB distro-loaded disc sporting Ubuntu 9.10 (which is already on my system,) Mandriver, and open-SUSE 11.2 which I decided to install.
Problem is, I can't get into Ubuntu anymore, where all my mail music ect is.

Ubuntu is listed with vista in window 2 of open-suse grub. When I try to boot Ubuntu I get an earlier kernel splash which is somewhat magnified and busybox v1.1.3. Vista boots OK.

Would un installing openSUSE put things back as they were? I can learn about open-SUSE using the DVD

View 9 Replies View Related

OpenSUSE Install :: After Installing 11.2 Computer Dont Boot

Jan 25, 2010

Well, in first place let me tell you that my HDD boot sector or i dont know what is damaged, so to boot i made a boot usb with the grubdos utility, so anytime i want to boot in win7 i have to plug my usb and select win7 from it.Today i finished downloading the opensuse iso, then i mounted the image with poweriso and initialized the install, and it asked me to restart my computer, after that when i boot from my usb pendrive it goes directly to the opensuse install, but it just showme the blackscreen and nothing happens.

View 8 Replies View Related

OpenSUSE Install :: Boot Messages After Installing Ubuntu 10.04

May 12, 2010

So I'm using opensuse 11.2 and recently installed ubuntu 10.04 to a different partition and all went well. when I boot opensuse I get a lot of interesting messages yet everything seems to load fine and I've not noticed anything behaving differently. I checked the boot log via

Code:

Looking through it i did see a line in there that looked familiar from the boot up and it is

View 6 Replies View Related

OpenSUSE Install :: Manually Installing LVM Mirroring At Boot On 11.3?

Aug 23, 2010

in the direction of a HOWTO (cant find one via Search or Google)hat tells me how to install dm_mirror to enable a boot of an 11.3 system that uses LVM for root and swap? I really would likecommands rather than using the GUI as it will help me understand what is going on in the background

View 1 Replies View Related

OpenSUSE Install :: Borked My WindowsXP Boot When Installing 11.3

Sep 28, 2010

I have an existing WinXP install on the main drive (/dev/sda) of a Dell laptop. I installed Suse on the second (caddy tray) drive and didn't touch the existing windows partition during install.

After install completed, I found there was no boot loader entry for WinXP during startup. Only SUSE-related stuff. I opened YaST boot loader and tried creating an entry of type "other" and device of "/dev/sda1" and set this as the default entry.

The /boot/grub/menu.lst file now has an entry:

When I restart the machine I get an error message:

View 9 Replies View Related

OpenSUSE Install :: Enable Booting From Boot Partition When Installing 11.3?

Sep 13, 2010

Just did a clean install of 11.3. After first try, system couldn't boot for hard drive. When installing a second time, I noticed that booting from a boot partition and the MBR are disabled by default. I enabled both and proceeded with the install. System now boots fine. Since the automatic partitioning created a boot partition, I'm assuming that that is where the system is booting from and I didn't need to enable booting from MBR, but am not 100% sure. So make sure to at least enable booting from a boot partition

View 3 Replies View Related

OpenSUSE Install :: Fill In The /boot Folder Without Installing GRUB?

Dec 15, 2010

I have a laptop with the CD-ROM apparently broken, so I installed OpenSuSE 11.4 milestone4 from USB stick .unfortunately in the end of the installation I had a GRUB configuration error (twice) . then, in the third time I removed GRUB from the installation procedureSince my other GNU / Linux is Ubuntu, I did update-grub on ubuntu, it detects the presence of OpenSuSE but it does not add it to its grub.cfgwhen I wanted to add it manually to ubuntu's GRUB, I realized that, in OpenSuSE, the /boot path was empty.My Question is: Do you know how to put the files needed to boot OpenSuSE (initrd, vmlinuz , ...) in the directory /boot without installing OpenSuSE's GRUB ?? (ie keep the ubuntu's GRUB)

View 8 Replies View Related

OpenSUSE Install :: 80 Is Too Small To Dual Boot OpenSuse And Windows 7?

Jan 19, 2010

ere's my issue I've got an 80GB SATA drive and a 320GB IDE drive, I've already installed Windows 7 on the SATA drive. 80 is too small (in my opinion) to dual boot openSuse and Windows 7. Can someone explain me how to use a partition from the 320 IDE to install openSuse, and how to setup grub so I wouldn't have any problems booting to Windows?

View 4 Replies View Related

OpenSUSE Install :: No Boot Image After Installing Nvidia Proprietary Driver In 11.3

Jul 21, 2010

since i installed nvidia proprietary driver on opensuse 11.3 my boot-image is gone. This is not really in issue but i would like to have it back. is there a way to get it back or a bootimage howto or something?

View 5 Replies View Related

OpenSUSE Install :: [11.3] Boot Splash Disappeared After Installing Nvidia Driver?

Jul 21, 2010

I installed the nvidia driver from the official repository for openSUSE 11.3 and now everything works perfectly, except i get a verbose splash screen after the grub menu.It has worked after i upgraded from 11.2. In my menu.lst it already says splash=silent.If you want more information, please ask, because i don't know where to look or what to show you (i'm fairly new to linux in general).

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved