Running Opensuse 11.4 (but had same problem on 11.3). During startup and shutdown, the text messages are displayed using a very large font (characters are > 1 cm high). How can I specify the font and font size it uses ? Presumably it is doing a bad job of detecting the monitor (its a Samsung SyncMaster P2250). Which config file contains a suitable entry, and what is the entry ?
View 6 Replieson startup/shutdown i get following message "vbox guest (something) failed
what does that mean ?
opensuse 11.3 gnome
Yesterday I upgraded my desktop Hp dx2280 which I use at office and HP Compaq Presario 300 Widescreen laptop which I use at home from fedora 10 to Fedora 11. Upgradation was just fine without any errors in both cases. My desktop machine works just fine and I, hardcore KDE lover, am enjoying working. It is just amazing. But sadly my Presario C300 laptop is a mess for KDE. Login is fine And I got the desktop. First I ran xmms and pleased to hear my favourite mp3 song on it. Sound quality -- EXCELLENT.
But for any other application, whether it is Firefox, openoffice word, kwrite, even the Konsole which I love desperately presents me a screen with extra extra large fonts showing only menus like File Edit & so on. I can not see even fourth menu and no scrollbar etc. Even the clipboard gives me the same result. i.e. extra large fonts. While everything is perfect with GNOME, which I am using now. I am not getting what is the problem. Previously I had upgraded my Presario C300 laptop from KDE 4.1.x from Fedora 11 to KDE 4.2.1 from repo of kdetesting. Is that making some conflicts?
I did a live upgrade from 11.3 KDE and observe a following issue.When I press the shutdown button on the laptop it initiates the shutdown and shuts down fine but after a significant delay of time (something like 30 seconds). When I click the shutdown button in KDE it initiates the shutdown instantly. This was not the case in 11.3 where the shutdown worked the same regardless of the method that triggered it
View 6 Replies View RelatedI hoping someone can point me in a direction. I installed F13 KDE from the live cd and now when I Shutdown or Reboot, it takes 2 minutes and 8 seconds for the machine to power off. Yes, I timed it.Happens everytime like that. Even when booting from both "mainstream" live cd and the KDE spin live cd. When I hit the Shutdown or Reboot, it goes through the daemons/services shutdown the flashes up the Halting System or Please wait while the system reboots messages (respectivley), turns off the LCD and then just... sits with the power light on and hard drive activity light on. I should mention this is on a Toshiba Laptop about 2 years old now. Intel Chipsets. (Satellite Pro S300M-S2142 if anyone is really curious). The hard drive light stays on for about 1:03 minutes and then it turns off, at 2:08 minutes - the Power light finally turns off and the thing finally shuts down or reboots. If this sounds familiar, it's because it is and I've posted about it with F12 and it's still there with F13. Running kernel-2.6.33.3-85.fc13.x86_64
View 1 Replies View RelatedI'm ssh X11 forwarding xconsole to a Fedora 14 desktop. The font in xconsole is very large. I'd like to reduce it, but can find no means to do so. I looked at the XConsole resources file and there's no way to set a font type, or size. Man page for xconsole also has nothing in this regard. Changing the desktops DPI doesn't have the desired effect either.
I've been doing this X11 forward for years, and this is the first time I ever get a too large font in xconsole. Is there some other configuration or resource I'm missing?
there are 2 related to 11.3: openSUSE_11.3/ and openSUSE_11.3_KDE_Distro_Factory/ Index of /repositories/KDE:/Extra they are not listed as official kde4 repos here KDE repositories - openSUSE, but they are in the same directory structure on the build service so it would assume they are official (what ever official means) They have rpm's I didn't see in community and playground (at least for 11.3) such as audex and clementine I would guess that they are for the stable and factory versions of KDE4 but then shouldn't there be a 3rd for unstable if this was the case? Or do they refer to the distro, 11.3 stable and 11.3 factory
View 6 Replies View RelatedTrying to install kuickshow from KDE-Extra repos. liblmlib.so.1 called out as missing. Where is it? Is there a way I was "supposed" to know where it was without having to post here?
View 4 Replies View RelatedWhenever I try to install anything from YaST2, it decides to include a lot of extra stuff I don't need. It says it's just added dependencies, but I hardly think the Russian translation for the open office help files counts as a dependency for WINE. This also happens when I try to install the amarok mp3 codec.
View 3 Replies View RelatedGot tired of long waits for fsck on very large partitions.Here's a script to fsck selected partitions every 'N' shutdowns. No more boot delays for fsck (unless something is really wrong
Update1: On my system '/usr/libexec/gam_server' (gamin component used by xfce) prevented /home from being unmounted. I changed
Code:
[code]...
I recently installed Fedora 14 on an old Dell server (Pentium 4). It works fine, except that it somehow includes an extra startup step, in which I have to choose between two different grub versions. Here is the screen I get:
GNU GRUB version 0.97
Fedora (2.6.35.11-83.fc14. i686)
Fedora (2.6.35.6-45.fc14. i686)
Press enter to boot the selected OS, 'e' to edit the commands before booting, 'a' to modify the kernal arguments before booting, or 'c' for a command-line. I always select "Fedora (2.6.35.11-83.fc14. i686)" because I presume it is the latest version. Is there anything I can do to automate the choice of "Fedora (2.6.35.11-83.fc14. i686)" and avoid this extra step? On another subject, I have already modified the custom.conf file to eliminate the login screen step.
I use Brasero/K3b but both of them showed that the ISO is too large (4.7GB) - while the DVD capacity of the disk I'm using is 4.3 or so GB (Princo). Then I figured I'd try to extract the files and burn them like that (extracted iso being 4.2 GB). So then I encountered another issue, usually one would find boot.catalog, which wasn't the case here. Any ideas on how I should burn my DVD ISO ?
View 7 Replies View RelatedI recently installed openSUSE 11.4 on another hard disk of my 11.3 machine. I have another drive in my computer that is used solely for extra storage. Before installing 11.4 I could boot my computer with or without the drive installed, but now if I try to boot without it I get Error 17 from GRUB. I don't understand this as there is nothing on that drive that should be needed by boot and I can find nothing in the GRUB configuration that references the drive.I am getting ready to clear the whole system for a fresh install anyways, but it would be nice to know for future knowledge what is causing it.
View 9 Replies View RelatedI tried to install a package of extra Compiz Fusion plugins but it won't run. Says there is some kind of conflict or error. Anybody know where I can find this. The particular plugin I want is Show Mouse.
View 4 Replies View RelatedEssentially I have found this guide, but it is for miktex, i need a guide for texlive on Debian/Ubuntu which will not pollute dpkg installed texmf.
I'm interested in converting TrueType font to be usable in (pdf)(La)TeX.
All the power google turn up just stuff f relating how to install microsoft fonts or do stuf on MikTeX.
I CANNOT USE XeLaTeX!!! I use pstricks and the font must be available in plain TeX! Otherwise my document looks inconsistent!
I can't change fonts in Firefox preferences (Content).
My OS is openSUSE 11.3, KDE 4.4.4. release 8.
Any type and size of font I use, nothing happens. It's still same font which I choose for the first time I've started Firefox afer installing openSUSE 11.3.
I have tried to copy the files to /usr/share/fonts/truetype but i get Error opening file '/usr/share/fonts/truetype/FFF Tusj.ttf': Permission denied
View 2 Replies View RelatedWhen I installed opensuse 11.2 64-bit (KDE) the installer set the root partition to 20GB by default. That seemed unnecessarily large, so I reduced it to 16GB. I then completed the install (basically a default KDE install minus games & educational stuff) and still had more than 8GB free. I'm aware that these days hard drive storage space is quite cheap, but it's not so cheap for me as I have an SSD. Would it not be reasonable to reduce the default root partition size to 12GB, or perhaps vary it according to the software package load selected?
View 3 Replies View RelatedI am using OS 11.0 Every time I boot my laptop (dell inspiron 9300 - ati video M300). I get the desktop display as 1920 X 1200. This is too large for my default. I use KRandRTray to resize back to 1024 X 768. How can I set 1024 X 768 as the default but still have the option to go to 1920 X 1200?
View 3 Replies View RelatedI am installing from the scratch a 11.3 on a PC on which previously 11.1 did run flawlessly. (Athlon 3700 with 3GB ram and Asrock socket 939 mainboard. Graphics is Nvidia. The installation comes every time up to 90% when it arrives at "font initialization). No error message is displayed. The little "cursor wheel" is still turning but else, there is no activity.
DVD from an sha1 checked and MD5 doublechecked download was burned with lowest speed in K3b and verified by the same program post burn, with full success of every verification.
Tried to change DVD reader but does not change the result. Runs speedy up to that step.
I am testing some boot splash screens but the ones I like most are darker and therefore the black font color during boot, well, shows on dark grey or black background, so I can't see.
I would like to change the font color of the messages, but not the results (green=DONE, red=FAILED, etc., I don't want to change that, only the messages like "doing fast boot", "Loading CPUfreq", and all the ones loading stuff, mounting, etc.).
Apparently I need to edit /lib/lsb/init-functions?
I found a few examples on google, mostly for debian based and the ones I have seen are far more complex than the very simple one opensuse uses. So I am stuck here. 11.2 version.
The default partition manager which OpenSUSE DVD 11.4 uses (Expert Partitioner) is not creating any logic partition with / mount because another system is already using it, is there anyway to fix this?
View 9 Replies View Relatedthe (almost) last message I see is"shutting down (remotefs) network nterfaceIf I then press Ctrl-Alt-Del the system goes on until:shutting down (localfs)network interface: eth0... and that's it - further go on possible,by any means.No complete shutdown possible.Until present I did at least get nojournal replay at the next startup
View 9 Replies View RelatedI'm trying (& failing) to write a script in /etc/init.d that only operates on boot up but NOT on shutdown. The program I want to run does not accept any parameters. This works
Code:
#!/bin/bash
test -f /var/www/html/moveit || exit 0
. /var/www/html/moveit
exit 0
but on shutdown and startup.
This doesn't
Code:
#!/bin/bash
test -f /var/www/html/moveit || exit 0
case "$1"
start)
. /var/www/html/moveit
;; top)
;; *)
esac
exit 0
either at startup or shutdown.
Pressing the shutdown or restart buttons in XFCE simply logs me out and leaves the system running. I did some Googling and it was suggested that by default users don't have permission to shutdown. (not sure how this is a XFCE specific problem in that case but moving on...)
I've taken the following advice:
For a "desktop" system that wants to protect itself from casual attacks (and "puzzled penguins"), but still grant the user control of their system, run the following as "root":
USER=<your_userid>
polkit-auth --show-obtainable | while read OPT; do
polkit-auth --user $USER --grant $OPT
done
Where <your_userid> is the name of your unprivileged account. I wasn't entirely sure how to run it, so I stuck it into a shell script and ran that with the sudo command. Needless to say it hasn't worked. Is there an easy "sure fire" way to fix this problem, hitting the shutdown button repeatedly to test really grates on you after a while. BTW, Pressing the power button on the front of the system shuts it down okay.
Recently upgraded from OpenSuse 11.1 to 11.2 and although it didn't go smoothly the first time (computer hung), I was able to complete the install and start. I have added and updated the required repositories.
The following problems persist:
1. I can't shutdown normally. The black screen before shutdown shows something on the lines of 'segmentation fault'...and also 'cannot find fstab or mtab'. I have to restart into Failsafe mode which shuts down properly.
2. Amarok keeps crashing. It used to work fine in 11.1 and I think its one of the best media players out there so I am wondering why. I do have other players and I have used the debugging reporter option for Amarok.
I have recently created a KDE 4 desktop using suse studio, it boots up fine on my machine, but doesn't shutdown!!
On my mum's laptop, which I will be using it most on, (it's windoez) it won't start KDE 4 at all! I can use the console, but I wanted to impress her with the amazing GUI and Compiz. And you can't make presentations or browse the web in a console, can you?
And sudo poweroff and sudo shutdown -h now don't work either!
Yesterday I migrated from 11.0 to 11.3 (32-bit version) and began customizing personal desktop settings once everything seemed to be working OK. Today I continued customizing the personal desktop settings. Now everything freezes up during shutdown.
The screen goes blank with the arrow pointer frozen in place. Hitting enter or ctrl-alt-esc has no effect. One time, I walked away for 30 minutes to see if it would resolve itself, but there was no effect.
I saw someone is having a similar problem with the 64-bit version, but there were no responses. Where do I go from here?
this problem is a well known one as far as I have read, but the solution is yet to come.I formatted and installed OpenSuse 11.3 KDE as the only OS on a PC with 768 RAM, two Hard Disks (6+8 GB), mobo Abit BE6, processor Celeron Coppermine 1100Mhz (with slotket adapter), video card Matrox G400+, Sound Blaster Live! Value.HD 1 is set root and ext4 + 1 GB swap, HD2 is /home ext3.The live OpenSuse CD worked fine, shutdown turns off the power, while the installed one won't. I formatted twice, and the problem persist. Reboot works fine.At shutdown, the hard disks are turned off while the screen and power are still on, so I have to press the power button to turn off completely.
Yesterday I wasted all the day with this problem without solving it, I've read many threads but no solution worked. That PC obviously worked fine with both Windows 98 and XP.Those problems are in the "out of the box" installation, without any setting altered.I've tried disabling ACPI, PM control by APM, and power management features in the bios (latest 2001's Award bios for this old mobo).I've set alternatively pci=noacpi, nosmp, apm=power-off, acpi=force in GRUB options. I've updated the distro. I've set value poweroff for HALT in etc/sysconfig. Nothing changed.I've also tried macumba and ancient celtic cerimonies, yet they didn't work.Is it possible to solve this problem or it's a known unsolved bug? Loading OS screen:Those are the final screens after shutdown where it stops
Everytime I try to install opensuse it locks up at the very finish, forcing me to force shutdown. Then when I try to boot up, it loads a horribly misconfigured view of another linux install. Anyone know what is going on? I posted here alsi: Opensuse install problems - linux-free-bsd-general-discussion - Linux-Free-BSD
View 9 Replies View Related