Everytime I try to install opensuse it locks up at the very finish, forcing me to force shutdown. Then when I try to boot up, it loads a horribly misconfigured view of another linux install. Anyone know what is going on? I posted here alsi: Opensuse install problems - linux-free-bsd-general-discussion - Linux-Free-BSD
View 9 RepliesI did a live upgrade from 11.3 KDE and observe a following issue.When I press the shutdown button on the laptop it initiates the shutdown and shuts down fine but after a significant delay of time (something like 30 seconds). When I click the shutdown button in KDE it initiates the shutdown instantly. This was not the case in 11.3 where the shutdown worked the same regardless of the method that triggered it
View 6 Replies View RelatedI've installed xUbuntu on a machine I will be using as a file server. Everything is fine except one thing. If the server suffers an improper shutdown such as a loss of power the next time the machine boots it gets to the GRUB2 boot menu and then waits for a keyboard input.As this machine runs headless with nothing connected other than a network cable and power lead and is tucked away under the stairs it's quite an inconvienience to go to the machine and plug in a keyboard so I can press enter.Is there some way I could force the machine to boot as normal without stopping at the menu ?
View 3 Replies View RelatedIf I issue a shutdown -rF now, it will force e2fsck's on all the volumes when it reboots. But once the checks automatically finish, does it restart normally? I want to run e2fsck's on all my volumes, but dont want to stay the probably 5 hours it will run, so hoping someone knows for sure what happens.
View 2 Replies View RelatedI installed office 2000 CD using wine, I did this on Ubuntu net-book remix on a NC10 using a networked CD drive. So the installation went okay, I then came to using the software, word opened and promoted me for my product key, which I entered correctly the window disappeared for a second then repaired, I entered the key again but then this caused the whole program to shut down, I have tried repairing it , reinstalling it all apart from uninstalling and reinstalling it. Which I have tried and subsequently failed
Right I got it to work, so for any looking for the solutions simply go to /home/(username)/.wine/system.reg and change the user name and the organisation either delete it or enter something, I entered my user name but I left the organisation blank but I left the quote marks that were there. Save it and the product code thingy should not appear again.
i'm using Ubuntu in my office. I have to report two issues with network connectivity.1. Wireless doesn't work if come back after suspend/hibernate the computer. The work around I follow is,a. Turnoff the wifi and restart the computer. (It won't shutdown. have to do force using the power button)b. Reinstall the network-manager_0.8-0ubuntu3_amd64.deb and network-manager-gnome_0.8-0ubuntu3_amd64.debc. Restart the computer (Again it won't shutdown. Need force.)d. Now wifi will detect the networks and shutdown works fine hereafter.2. Sometimes the wired gets disconnect frequently (thrice in 2minutes). Physical connectivity is good and working well in Windows.
View 6 Replies View RelatedTwo or three times on a daily basis it just freezes and I do not know why. For example, I am doing some minor coding, surfing the web and just some regular stuff and suddenly, out of nowhere, it just freezes. I cannot force reboot, cannot shutdown, cannot run, cannot enter terminal, nothing. Totally helpless. Only physical reboot do the work. Never had this issue before.
View 9 Replies View RelatedI need to force 80 pin cable detect on my cdrom. According to the kernel-parameters.txt file you can do this by using libata.force=(port).(device) 80c Here is the actual explanation from the kernel file: libata.force=[LIBATA] Force configurations. The format is comma separated list of "[ID:]VAL" where ID is PORT[.DEVICE]. PORT and DEVICE are decimal numbers matching port, link or device. Basically, it matches the ATA ID string printed on console by libata. If the whole ID part is omitted, the last PORT and DEVICE values are used. If ID hasn't been specified yet, the configuration applies to all ports, links and devices.
My question is where do you find the proper port.device numbers? I'm guessing it's lspci but I'd rather be sure before I do something silly.. An actual working line for a cdrw as master on the first ide channel would be excellent. BTW my cdrw is detected as sr0 so the normal "ide" boot params won't work....
the (almost) last message I see is"shutting down (remotefs) network nterfaceIf I then press Ctrl-Alt-Del the system goes on until:shutting down (localfs)network interface: eth0... and that's it - further go on possible,by any means.No complete shutdown possible.Until present I did at least get nojournal replay at the next startup
View 9 Replies View RelatedPressing the shutdown or restart buttons in XFCE simply logs me out and leaves the system running. I did some Googling and it was suggested that by default users don't have permission to shutdown. (not sure how this is a XFCE specific problem in that case but moving on...)
I've taken the following advice:
For a "desktop" system that wants to protect itself from casual attacks (and "puzzled penguins"), but still grant the user control of their system, run the following as "root":
USER=<your_userid>
polkit-auth --show-obtainable | while read OPT; do
polkit-auth --user $USER --grant $OPT
done
Where <your_userid> is the name of your unprivileged account. I wasn't entirely sure how to run it, so I stuck it into a shell script and ran that with the sudo command. Needless to say it hasn't worked. Is there an easy "sure fire" way to fix this problem, hitting the shutdown button repeatedly to test really grates on you after a while. BTW, Pressing the power button on the front of the system shuts it down okay.
Recently upgraded from OpenSuse 11.1 to 11.2 and although it didn't go smoothly the first time (computer hung), I was able to complete the install and start. I have added and updated the required repositories.
The following problems persist:
1. I can't shutdown normally. The black screen before shutdown shows something on the lines of 'segmentation fault'...and also 'cannot find fstab or mtab'. I have to restart into Failsafe mode which shuts down properly.
2. Amarok keeps crashing. It used to work fine in 11.1 and I think its one of the best media players out there so I am wondering why. I do have other players and I have used the debugging reporter option for Amarok.
I have recently created a KDE 4 desktop using suse studio, it boots up fine on my machine, but doesn't shutdown!!
On my mum's laptop, which I will be using it most on, (it's windoez) it won't start KDE 4 at all! I can use the console, but I wanted to impress her with the amazing GUI and Compiz. And you can't make presentations or browse the web in a console, can you?
And sudo poweroff and sudo shutdown -h now don't work either!
Yesterday I migrated from 11.0 to 11.3 (32-bit version) and began customizing personal desktop settings once everything seemed to be working OK. Today I continued customizing the personal desktop settings. Now everything freezes up during shutdown.
The screen goes blank with the arrow pointer frozen in place. Hitting enter or ctrl-alt-esc has no effect. One time, I walked away for 30 minutes to see if it would resolve itself, but there was no effect.
I saw someone is having a similar problem with the 64-bit version, but there were no responses. Where do I go from here?
this problem is a well known one as far as I have read, but the solution is yet to come.I formatted and installed OpenSuse 11.3 KDE as the only OS on a PC with 768 RAM, two Hard Disks (6+8 GB), mobo Abit BE6, processor Celeron Coppermine 1100Mhz (with slotket adapter), video card Matrox G400+, Sound Blaster Live! Value.HD 1 is set root and ext4 + 1 GB swap, HD2 is /home ext3.The live OpenSuse CD worked fine, shutdown turns off the power, while the installed one won't. I formatted twice, and the problem persist. Reboot works fine.At shutdown, the hard disks are turned off while the screen and power are still on, so I have to press the power button to turn off completely.
Yesterday I wasted all the day with this problem without solving it, I've read many threads but no solution worked. That PC obviously worked fine with both Windows 98 and XP.Those problems are in the "out of the box" installation, without any setting altered.I've tried disabling ACPI, PM control by APM, and power management features in the bios (latest 2001's Award bios for this old mobo).I've set alternatively pci=noacpi, nosmp, apm=power-off, acpi=force in GRUB options. I've updated the distro. I've set value poweroff for HALT in etc/sysconfig. Nothing changed.I've also tried macumba and ancient celtic cerimonies, yet they didn't work.Is it possible to solve this problem or it's a known unsolved bug? Loading OS screen:Those are the final screens after shutdown where it stops
On one of my computers that I upgraded from 11.3 to 11.4 with a SSD HDD, it no longer umounts any disks on reboot or shutdown, there are no errors shown, it goes from sending TERM and KILL to rebooting.here is my fstab:
Code:
/dev/disk/by-id/ata-OCZ_SOLID_SSD_MK0109030A6100011-part1 /boot ext4 acl,user_xattr,noatime 1 2
[code]...
recently I installed opensuse 11.4 in my Dell optiplex 790 desktop. everything works well. however, when I tried to restart or shutdown my computer . the computer logoff and then "freeze" at opensuse window. I have to turn off the power button forcely and turn on the computer again.
My computer configuration:
DELL Optiplex 790
Intel i5 3.1G with HD intel graphic card
Bios revision A05
Memory 8G
I am new to opensuse, coming over from debian based systems. However I am having an issue in which my system will not power off on shutdown. Restarts just fine. i get a missing error during shutdown, but there is nothing to relate the error to on that line. Then the shutdown procedes to The System will be halted immediately then hangs. The keyboard powers off and then thats it. All fans are still running. I have searched extensively on this forum and google.
View 9 Replies View RelatedWhen i shutdown my SuSE 11.2 box with all current updates i have started to notice an error message.Something about failed to unmount, trying remount as read only or something like that.The trouble is its almost the very last message that appears and its not on the screen long enough to read properly.Somewhere is there a logfile that i can recover this error message from so that i can make some sort of an attempt to resolve the issue, post the whole message here in more detail?
View 3 Replies View RelatedI have been trying to fix this for some time, on and off, and have been unable to, I have also ben unable to find a solution in the forums.I have installed openSUSE11.2 GNOME on a laptop, the install went fine, and it runs great, except for two problems:When I start up the splash screen doesn't show (this isn't really important, and I am happy to watch as everything is loaded)When I shutdown/reboot the computer freezes and I have to use the power button to switch off.This doesn't happen every time I shutdown, but most of the time.The freeze happens at different points of shutdown, so I don't know where to find what is causing the problem.As I mentioned point 1 is not really important, although I would like to know why this is happening, but problem 2 is very important.
View 9 Replies View Relatedfor some reason, my opensuse 11.2 can not shut down as normal. by pressing ctrl-alt-F1 and issuing "init 0", the console displays the following messages and then stops there. Segmentation fault Master Resource control: runlevel 0 has been reached skipped services in runlevel 0: SuSEfirewall2_setup I have to push power button to shut down it.
View 2 Replies View RelatedWhenever I reboot or shut down my computer (running OpenSuse 11.2 on a Dell Studio 15), it makes a weird noise that sounds like very loud static, even if my sound was muted when I selected shut down.
View 9 Replies View Relatedthis forum and also to OpenSuse. Wn i shutdown my sys, it restarts rather than shutting down. Please help me out.
View 2 Replies View RelatedI have opensuse 11.4 (Gnome + KDE) installed. The problem is with Gnome. When in KDE, everything works fine. But in gnome, when I shutdown/restart, it merely logs off the session. Then I have to shutdown it from the menu in the login screen.
View 2 Replies View RelatedRunning OpenSuSE 11.2, KDE 4.3.5 "release 0", kernel 2.6.31.12-13-default.
During shutdown, the messages state:
"Unmounting file systems
Could not find /windows/J_big in mtab
[code]....
I didn't notice any relevant complaints regarding 11.2 in the archives. The bootup & shutdow may be different problems. Randomly my recent install boots up fine or hangs with a blank black screen. A Ctl Alt F2 gets me to a prompt. Startx returns a lockfile comment that X is already running.
From here I can shut 11.2 down and restart it OK. There must be a bootlog kept in /var somewhere. I haven't tried the non-automatic bootup. The shutdown randomly drops back to the logout screen. Usually a shutdown command from there will shut it down. Sometimes shutdown doesn't work, but restart will finish the shutdown.
how to record/save logout/shutdown messages for OpenSuse 11.2.
View 9 Replies View RelatedI installed Open Suse 11.3 LXDE from the live CD I downloaded. My monitor settings reset to the highest resolution on every shutdown/reboot. Other settings like my wallpaper and removing the lock screen on screensaver also reset.
Is this there anything I can do to get settings/changes I make to stay?
on startup/shutdown i get following message "vbox guest (something) failed
what does that mean ?
opensuse 11.3 gnome
Running Opensuse 11.4 (but had same problem on 11.3). During startup and shutdown, the text messages are displayed using a very large font (characters are > 1 cm high). How can I specify the font and font size it uses ? Presumably it is doing a bad job of detecting the monitor (its a Samsung SyncMaster P2250). Which config file contains a suitable entry, and what is the entry ?
View 6 Replies View RelatedDoes anyone know where there might be a log of the shutdown errors I see flash on the screen when I shutdown the system? I thought they'd be in the warning log. Or is there a way to freeze that screen so I can actually read what is happening?
View 4 Replies View Related